s390: V=V qdio fixes
Subsystems (2)
PATCH 1/3 s390: V=V qdio fixes
From: Frank Pavlic <[email protected]>
Using FCP devices with V=V support, the input queue stalled when CCQ 97 had been returned in qdio_do_eqbs. When this happen we have to reissue the eqbs instruction.
Another bug was when V=V was enabled we checked if hardware has SIGA-sync support. If not we returned with 0 from tiqdio_is_inbound_q_done. Thus qdio lost initiative on FCP devices and input queue stalled. Running devices in V=V there is no SIGA-sync support but nevertheless we have to process tiqdio_is_inbound_q_done either.
Signed-off-by Frank Pavlic <[email protected]>
Signed-off-by Heiko Carstens <[email protected]>
---
drivers/s390/cio/qdio.c | 13 +++++++++++-- 1 files changed, 11 insertions(+), 2 deletions(-)
drivers/s390/cio/qdio.c +11 -2
@@ -165,8 +165,13 @@ qdio_do_eqbs(struct qdio_q *q, unsigned q_no = q->q_no;if (!q->is_input_q) q_no += irq->no_input_qs; +again: ccq =do_eqbs (irq->sch_token, state, q_no, start, cnt); rc =qdio_check_ccq (q, ccq); +if (rc ==1 ) { +QDIO_DBF_TEXT5 (1 ,trace,"eqAGAIN" ); + goto again; + }if (rc <0 ) {QDIO_DBF_TEXT2 (1 ,trace,"eqberr" );sprintf (dbf_text,"%2x,%2x,%d,%d" ,tmp_cnt, *cnt, ccq, q_no);
@@ -195,8 +200,13 @@ qdio_do_sqbs(struct qdio_q *q, unsigned q_no = q->q_no;if (!q->is_input_q) q_no += irq->no_input_qs; +again: ccq =do_sqbs (irq->sch_token, state, q_no, start, cnt); rc =qdio_check_ccq (q, ccq); +if (rc ==1 ) { +QDIO_DBF_TEXT5 (1 ,trace,"sqAGAIN" ); + goto again; + }if (rc <0 ) {QDIO_DBF_TEXT3 (1 ,trace,"sqberr" );sprintf (dbf_text,"%2x,%2x,%d,%d" ,tmp_cnt,*cnt,ccq,q_no);
@@ -1187,8 +1197,7 @@ tiqdio_is_inbound_q_done(struct qdio_q *if (!no_used)return 1 ; - -if (!q->siga_sync) +if (!q->siga_sync && !irq->is_qebsm)/* we'll check for more primed buffers in qeth_stop_polling */ return 0 ;if (irq->is_qebsm) {