i386 AT keyboard LED question.
Hi Vojtech,
I wondered why numlock LED goes off during boot process, even though I ask BIOS to turn on;
atkbd.c
/*
* If the get ID command failed, we check if we can at least set the LEDs on
* the keyboard. This should work on every keyboard out there. It also turns
* the LEDs off, which we want anyway.
*/
param[0] = 0;
if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
return -1;What is the rationale *why* we want LEDS off anyway?
Thanks,
Nick
Signature · 2 lines
"Person who say it cannot be done should not interrupt person doing it." -Chinese Proverb
Quoted 12 lines · Nick Warne
Hi Vojtech,
I wondered why numlock LED goes off during boot process, even though I ask BIOS to turn on;
atkbd.c/*
* If the get ID command failed, we check if we can at least set the LEDs on
* the keyboard. This should work on every keyboard out there. It also turns
* the LEDs off, which we want anyway.
*/
Quoted 6 lines
param[0] = 0; if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) return -1;What is the rationale *why* we want LEDS off anyway?
Some old notebooks forget them on, which makes the keyboard unusable - you get '4' instead of 'u', etc.
We can't read the LED state anyway (except for going to the BIOS data structures, which isn't reasonable from the atkbd driver), and we need to initialize it, so off is the safer default.
Further, this has been the behavior of Linux since it was first implemented, and thus, in my rewrite of the keyboard handling, I didn't change it.
It's trivial to change the default lock state in init scripts / xdm config / X config, too.
Signature · 2 lines
Vojtech Pavlik Director SuSE Labs
Quoted 5 lines · Vojtech Pavlik
Quoted 4 lines · Nick Warne
Hi Vojtech,
I wondered why numlock LED goes off during boot process, even though I ask BIOS to turn on;
~snip~
Quoted 2 lines
Some old notebooks forget them on, which makes the keyboard unusable - you get '4' instead of 'u', etc.
Understand. I never thought of that!
Quoted 8 lines
We can't read the LED state anyway (except for going to the BIOS data structures, which isn't reasonable from the atkbd driver), and we need to initialize it, so off is the safer default.
Further, this has been the behavior of Linux since it was first implemented, and thus, in my rewrite of the keyboard handling, I didn't change it.
Thanks for detailed reply - I see now, and didn't know any of this.
Quoted 2 lines
It's trivial to change the default lock state in init scripts / xdm config / X config, too.
I boot into init 3, so as I don't reboot much, I always forget to turn numlock back on when logging in [failed] - hence the question.
I will look at a local fix rather than a patch for kernel.
Thanks again,
Nick
Signature · 2 lines
"Person who say it cannot be done should not interrupt person doing it." -Chinese Proverb
Quoted 25 lines · Nick Warne
Quoted 5 lines · Vojtech Pavlik
Quoted 4 lines · Nick Warne
Hi Vojtech,
I wondered why numlock LED goes off during boot process, even though I ask BIOS to turn on;
~snip~
Quoted 2 lines
Some old notebooks forget them on, which makes the keyboard unusable - you get '4' instead of 'u', etc.
Understand. I never thought of that!
Quoted 8 lines
We can't read the LED state anyway (except for going to the BIOS data structures, which isn't reasonable from the atkbd driver), and we need to initialize it, so off is the safer default.
Further, this has been the behavior of Linux since it was first implemented, and thus, in my rewrite of the keyboard handling, I didn't change it.
Thanks for detailed reply - I see now, and didn't know any of this.
Quoted 7 lines
Quoted 2 lines
It's trivial to change the default lock state in init scripts / xdm config / X config, too.
I boot into init 3, so as I don't reboot much, I always forget to turn numlock back on when logging in [failed] - hence the question.
I will look at a local fix rather than a patch for kernel.
The 'setleds' command in boot.local might be the fix you're looking for.
Signature · 2 lines
Vojtech Pavlik Director SuSE Labs
Quoted 28 lines · Nick Warne
Quoted 5 lines · Vojtech Pavlik
Quoted 4 lines · Nick Warne
Hi Vojtech,
I wondered why numlock LED goes off during boot process, even though I ask BIOS to turn on;
~snip~
Quoted 2 lines
Some old notebooks forget them on, which makes the keyboard unusable - you get '4' instead of 'u', etc.
Understand. I never thought of that!
Quoted 8 lines
We can't read the LED state anyway (except for going to the BIOS data structures, which isn't reasonable from the atkbd driver), and we need to initialize it, so off is the safer default.
Further, this has been the behavior of Linux since it was first implemented, and thus, in my rewrite of the keyboard handling, I didn't change it.
Thanks for detailed reply - I see now, and didn't know any of this.
Quoted 2 lines
It's trivial to change the default lock state in init scripts / xdm config / X config, too.
Quoted 8 lines
I boot into init 3, so as I don't reboot much, I always forget to turn numlock back on when logging in [failed] - hence the question.
I will look at a local fix rather than a patch for kernel.
Thanks again,
Nick
In .. /etc/rc.d/rc.local
/usr/bin/setleds -num /dev/tty0 (or whatever)
Cheers,
Dick Johnson
Penguin : Linux version 2.6.13.4 on an i686 machine (5589.49 BogoMips). Warning : 98.36% of all statistics are fiction.
_
****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.
Thank you.
Quoted 1 line · Vojtech Pavlik
The 'setleds' command in boot.local might be the fix you're looking for.
Quoted 3 lines · linux-os (Dick Johnson)
In ..
/etc/rc.d/rc.local
/usr/bin/setleds-num/dev/tty0(or whatever)
I must have made the dork post of the month - sorry for the noise.
setleds +num
is indeed what I needed in rc.local.
Still, at least I learnt a lot about initialising keyboard by reading the code.
Thank you!
Nick
Signature · 2 lines
"Person who say it cannot be done should not interrupt person doing it." -Chinese Proverb
Quoted 4 lines
Some old notebooks forget them on, which makes the keyboard unusable - you get '4' instead of 'u', etc.
Not only old notebooks, but all 84-key keyboards with Num functionality are affected AFAICS.
Jan Engelhardt
Quoted 6 lines · Jan Engelhardt
Quoted 4 lines
Some old notebooks forget them on, which makes the keyboard unusable - you get '4' instead of 'u', etc.
Not only old notebooks, but all 84-key keyboards with Num functionality are affected AFAICS.
If we forced the LED to ON everytime, they would be. If we used the BIOS setting (by peeking into the BIOS area), then only a few machines would have a problem - the BIOS defaults are often either correct or correctable by the user.
Signature · 2 lines
Vojtech Pavlik Director SuSE Labs