Skip to contentSkip to conversation

Halt/restart support for MIPS

PATCH New Thiemo Seufer 1 participant 1 message Feb 21, 2006

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Halt/restart support for MIPS

Hello All,

This adds halt/restart support via a magic page. There is no real standard way to do this for MIPS systems, a patch for the MIPS Qemu kernels to add this support was also proposed.

Thiemo

target-mips/helper.c +13 -0
Index: qemu-work/target-mips/helper.c
===================================================================
@@ -103,6 +103,19 @@
         *prot = PAGE_READ | PAGE_WRITE;
     } else if (address < 0xC0000000UL) {
         /* kseg1 */
+#ifndef CONFIG_USER_ONLY
+	/* Check magic system control page. */
+	switch (address) {
+	case 0xBFBF0000: /* restart */
+		qemu_system_reset_request();
+		break;
+	case 0xBFBF0004: /* halt */
+		qemu_system_shutdown_request();
+		break;
+	default:
+		break;
+	}
+#endif
         /* XXX: check supervisor mode */
         *physical = address - 0xA0000000UL;
         *prot = PAGE_READ | PAGE_WRITE;