netdev/uevent
PATCH 1/1 netdev/uevent
This patch adds userspace notification for register/unregister and plug/unplug events for netdevices. It calls kobject_uevent to let userspace applications (via netlink-interface) know that e.g. the ethernet-cable was plugged in (or plugged out) and thus the ethernet device may have to be reconfigured.
Common scenario:
A userspace application is notified that the ethernet cable was plugged out and later plugged in. It now checks whether the ethernet card is now connected to an other network and reassigns it's IP-Address via DHCP.
BTW: Of course I know that the constant KOBJ_ONLINE actually has an other meaning than what I used it for. I just didn't want to introduce a new constant and it just seems perfect for my purpose.
net/core/dev.c +32 -0
@@ -104,6 +104,7 @@#include <linux/highmem.h> #include <linux/init.h> #include <linux/kmod.h> +#include <linux/kobject_uevent.h> #include <linux/module.h> #include <linux/kallsyms.h> #include <linux/netpoll.h>
@@ -742,6 +743,34 @@ }/** +* netdev_uevent - notify userspace of netdev events +* @dev: device +* @event: event for device +* +* Called to notify userspace of (de-)registering and status events +* of netdevices +*/ +static inline void +netdev_uevent (struct net_device *dev,int event) +{ +kobject_action_t action =0 ; + +switch (event) { +case NETDEV_CHANGE : + action =netif_carrier_ok (dev) ?KOBJ_ONLINE :KOBJ_OFFLINE ; +break ; +case NETDEV_REGISTER : + action =KOBJ_ADD ; +break ; +case NETDEV_UNREGISTER : + action =KOBJ_REMOVE ; +break ; + } +if (action) +kobject_uevent (&dev->class_dev.kobj, action,NULL ); +} + +/** * netdev_features_change - device changes fatures * @dev: device to cause notification *
@@ -765,6 +794,7 @@ {if (dev->flags &IFF_UP ) {notifier_call_chain (&netdev_chain,NETDEV_CHANGE , dev); +netdev_uevent (dev,NETDEV_CHANGE );rtmsg_ifinfo (RTM_NEWLINK , dev,0 ); } }
@@ -2937,6 +2967,7 @@if (err)printk (KERN_ERR "%s: failed sysfs registration (%d)\n" , dev->name, err); +netdev_uevent (dev,NETDEV_REGISTER ); dev->reg_state =NETREG_REGISTERED ;break ;
@@ -3108,6 +3139,7 @@this device. They should clean all the things. */ notifier_call_chain (&netdev_chain,NETDEV_UNREGISTER , dev); +netdev_uevent (dev,NETDEV_UNREGISTER );/* * Flush the multicast chain
Quoted 11 lines · Thomas Ogrisegg
This patch adds userspace notification for register/unregister and plug/unplug events for netdevices. It calls
kobject_ueventto let userspace applications (via netlink-interface) know that e.g. the ethernet-cable was plugged in (or plugged out) and thus the ethernet device may have to be reconfigured.Common scenario:
A userspace application is notified that the ethernet cable was plugged out and later plugged in. It now checks whether the ethernet card is now connected to an other network and reassigns it's IP-Address via DHCP.
Quoted 5 lines
BTW: Of course I know that the constant
KOBJ_ONLINEactually has an other meaning than what I used it for. I just didn't want to introduce a new constant and it just seems perfect for my purpose.Signed-off-by Thomas Ogrisegg <[email protected]>
Hm, I thought ethtool and netlink already handled this kind of event just fine. Why would you add a uevent too?
thanks,
greg k-h
Quoted 6 lines · Greg KH
Quoted 5 lines · Thomas Ogrisegg
This patch adds userspace notification for register/unregister and plug/unplug events for netdevices. It calls
kobject_ueventto let userspace applications (via netlink-interface) know that e.g. the ethernet-cable was plugged in (or plugged out) and thus the ethernet device may have to be reconfigured.
[...]
Quoted 3 lines
Quoted 1 line
Signed-off-by Thomas Ogrisegg <[email protected]>Hm, I thought ethtool and netlink already handled this kind of event just fine. Why would you add a uevent too?
What do you mean with "ethtool and netlink"? At least the current release of ethtool does not seem to have any netlink support.
Is there currently any possibility for a program to get notified when a netdevice link becomes ready (or the opposite)? I don't see any interface (besides polling /sys).
Quoted 7 lines · Thomas Ogrisegg
Quoted 6 lines · Greg KH
Quoted 5 lines · Thomas Ogrisegg
This patch adds userspace notification for register/unregister and plug/unplug events for netdevices. It calls
kobject_ueventto let userspace applications (via netlink-interface) know that e.g. the ethernet-cable was plugged in (or plugged out) and thus the ethernet device may have to be reconfigured.
Quoted 7 lines
[...]
Quoted 3 lines
Quoted 1 line
Signed-off-by Thomas Ogrisegg <[email protected]>Hm, I thought ethtool and netlink already handled this kind of event just fine. Why would you add a uevent too?
What do you mean with "ethtool and netlink"? At least the current release of ethtool does not seem to have any netlink support.
That should have been "or", sorry.
Quoted 3 lines
Is there currently any possibility for a program to get notified when a netdevice link becomes ready (or the opposite)? I don't see any interface (besides polling /sys).
Try asking on the netdev mailing list, I'm sure it must come up there a lot.
thanks,
greg k-h
Quoted 3 lines · * Thomas Ogrisegg ([email protected]) wrote:
Is there currently any possibility for a program to get notified when a netdevice link becomes ready (or the opposite)? I don't see any interface (besides polling /sys).
Yes, there's a netlink socket that already communicates these changes. Routing daemons typically consume this information. The netdev notifier chain should end up generating these events via rtmsg_ifinfo.
thanks,
-chris