x86_64: warn if unable to configure apic main timer
PATCH 1/1 x86_64: warn if unable to configure apic main timer
When using the APIC main timer option on x86_64, sometimes it fails to complete its setup. Warn about this and suggest the user try 'disable_timer_pin_1' if their system clock runs too fast. Also, make printing of the exact result of APIC timer calibration require 'apic=verbose'.
arch/x86_64/kernel/apic.c +7 -1
@@ -738,6 +738,12 @@ static void setup_APIC_timer(unsigned in apic_runs_main_timer++; }local_irq_restore (flags); + +if (apic_runs_main_timer ==1 ) { +printk (KERN_WARNING "Could not configure APIC main timer.\n" ); +printk (KERN_WARNING "Try boot option 'disable_timer_pin_1'" +" if your system clock runs too fast.\n" ); + } }/*
@@ -786,7 +792,7 @@ static int __init calibrate_APIC_clock(v result = (apic_start - apic) *1000L * cpu_khz / (tsc - tsc_start); } -printk ("result %d\n" , result); +apic_printk (APIC_VERBOSE ,"APIC timer result %d\n" , result); printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n",
Signature · 2 lines
Chuck "Equations are the Devil's sentences." --Stephen Colbert
Quoted 5 lines · Chuck Ebbert
When using the APIC main timer option on
x86_64, sometimes it fails to complete its setup. Warn about this and suggest the user try 'disable_timer_pin_1' if their system clock runs too fast. Also, make printing of the exact result of APIC timer calibration require 'apic=verbose'.
This is not the right solution. Have to find out what's going wrong and fix that.
I'm also experimenting with a different way to run the timer because apicmaintimer doesn't work on a lot of laptops because they have trouble running the APIC timer during c2.
-Andi