Skip to contentSkip to conversation

threaded mmap tweaks

PATCH In review Arjan van de Ven 12 participants 32 messages Feb 23, 2006 – Feb 28, 2006

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

cover threaded mmap tweaks

Hi,

I've been looking at a micro-benchmark that basically starts a few threads which then each allocate some memory (via mmap), use it briefly and then free it again (munmap). During this benchmark the mmap_sem gets contended and as a result things go less well than expected. The patches in this series improved the benchmark by 3% on a wallclock time basis.

Greetings,
Arjan van de Ven

#1 lore raw

PATCH 2/3 fast VMA recycling

This patch adds a per task-struct cache of a free vma.

In normal operation, it is a really common action during userspace mmap or malloc to first allocate a vma, and then find out that it can be merged, and thus free it again. In fact this is the case roughly 95% of the time.

In addition, this patch allows code to "prepopulate" the cache, and this is done as example for the x86_64 mmap codepath. The advantage of this prepopulation is that the memory allocation (which is a sleeping operation due to the GFP_KERNEL flag, potentially causing either a direct sleep or a voluntary preempt sleep) will happen before the mmap_sem is taken, and thus reduces lock hold time (and thus the contention potential)

The cache is only allowed to be accessed for "current", and not from IRQ context. This allows for lockless access, making it a cheap cache.

One could argue that this should be a generic slab feature (the preloading) but that only gives some of the gains and not all, and vma's are small creatures, with a high "recycling" rate in typical cases.

---
 arch/x86_64/kernel/sys_x86_64.c |    2 +
 include/linux/mm.h              |    2 +
 include/linux/sched.h           |    2 +
 kernel/exit.c                   |    4 +++
 kernel/fork.c                   |    2 +
 mm/mmap.c                       |   50 ++++++++++++++++++++++++++++++++--------
 6 files changed, 52 insertions(+), 10 deletions(-)
arch/x86_64/kernel/sys_x86_64.c +2 -0
Index: linux-work/arch/x86_64/kernel/sys_x86_64.c
===================================================================
@@ -55,6 +55,8 @@ asmlinkage long sys_mmap(unsigned long a
 		if (!file)
 			goto out;
 	}
+
+	prepopulate_vma();
 	down_write(&current->mm->mmap_sem);
 	error = do_mmap_pgoff(file, addr, len, prot, flags, off >> PAGE_SHIFT);
 	up_write(&current->mm->mmap_sem);
include/linux/mm.h +2 -0
Index: linux-work/include/linux/mm.h
===================================================================
@@ -1051,6 +1051,8 @@ int shrink_slab(unsigned long scanned, g
 void drop_pagecache(void);
 void drop_slab(void);
 
+extern void prepopulate_vma(void);
+
 extern int randomize_va_space;
 
 #endif /* __KERNEL__ */
include/linux/sched.h +2 -0
Index: linux-work/include/linux/sched.h
===================================================================
@@ -838,6 +838,8 @@ struct task_struct {
 /* VM state */
 	struct reclaim_state *reclaim_state;
 
+	struct vm_area_struct *free_vma_cache;  /* keep 1 free vma around as cache */
+
 	struct dentry *proc_dentry;
 	struct backing_dev_info *backing_dev_info;
 
kernel/exit.c +4 -0
Index: linux-work/kernel/exit.c
===================================================================
@@ -878,6 +878,10 @@ fastcall NORET_TYPE void do_exit(long co
 	 */
 	mutex_debug_check_no_locks_held(tsk);
 
+	if (tsk->free_vma_cache)
+		kmem_cache_free(vm_area_cachep, tsk->free_vma_cache);
+	tsk->free_vma_cache = NULL;
+
 	/* PF_DEAD causes final put_task_struct after we schedule. */
 	preempt_disable();
 	BUG_ON(tsk->flags & PF_DEAD);
kernel/fork.c +2 -0
Index: linux-work/kernel/fork.c
===================================================================
@@ -179,6 +179,8 @@ static struct task_struct *dup_task_stru
 	/* One for us, one for whoever does the "release_task()" (usually parent) */
 	atomic_set(&tsk->usage,2);
 	atomic_set(&tsk->fs_excl, 0);
+	tsk->free_vma_cache = NULL;
+
 	return tsk;
 }
 
mm/mmap.c +40 -10

114 lines not on this page · raw message

#2 lore raw

Re: [Patch 2/3] fast VMA recycling

Quoted 6 lines · Arjan van de Ven

This patch adds a per task-struct cache of a free vma.

In normal operation, it is a really common action during userspace mmap or malloc to first allocate a vma, and then find out that it can be merged, and thus free it again. In fact this is the case roughly 95% of the time.

Quoted 6 lines

In addition, this patch allows code to "prepopulate" the cache, and this is done as example for the x86_64 mmap codepath. The advantage of this prepopulation is that the memory allocation (which is a sleeping operation due to the GFP_KERNEL flag, potentially causing either a direct sleep or a voluntary preempt sleep) will happen before the mmap_sem is taken, and thus reduces lock hold time (and thus the contention potential)

The slab fast path doesn't sleep. And if you're short of memory then you probably have other issues.

Quoted 6 lines

The cache is only allowed to be accessed for "current", and not from IRQ context. This allows for lockless access, making it a cheap cache.

One could argue that this should be a generic slab feature (the preloading) but that only gives some of the gains and not all, and vma's are small creatures, with a high "recycling" rate in typical cases.

Numbers numbers numbers. What workload? How much did it help?

Also looks like a very narrow purpose hard to maintain fragile hack to me.

-Andi

#3 lore raw

Re: [Patch 2/3] fast VMA recycling

Quoted 7 lines · Andi Kleen
Quoted 6 lines · Arjan van de Ven

This patch adds a per task-struct cache of a free vma.

In normal operation, it is a really common action during userspace mmap or malloc to first allocate a vma, and then find out that it can be merged, and thus free it again. In fact this is the case roughly 95% of the time.

Quoted 8 lines
Quoted 6 lines

In addition, this patch allows code to "prepopulate" the cache, and this is done as example for the x86_64 mmap codepath. The advantage of this prepopulation is that the memory allocation (which is a sleeping operation due to the GFP_KERNEL flag, potentially causing either a direct sleep or a voluntary preempt sleep) will happen before the mmap_sem is taken, and thus reduces lock hold time (and thus the contention potential)

The slab fast path doesn't sleep.

it does via might_sleep()

Quoted 1 line

Numbers numbers numbers. What workload? How much did it help?

see post 0/3

3% on a threaded allocation benchmark (which resembles a webserver with cgis apparently)

#4 lore raw

Re: [Patch 2/3] fast VMA recycling

Quoted 15 lines · Arjan van de Ven
Quoted 14 lines · Andi Kleen
Quoted 12 lines · Arjan van de Ven

This patch adds a per task-struct cache of a free vma.

In normal operation, it is a really common action during userspace mmap or malloc to first allocate a vma, and then find out that it can be merged, and thus free it again. In fact this is the case roughly 95% of the time.

In addition, this patch allows code to "prepopulate" the cache, and this is done as example for the x86_64 mmap codepath. The advantage of this prepopulation is that the memory allocation (which is a sleeping operation due to the GFP_KERNEL flag, potentially causing either a direct sleep or a voluntary preempt sleep) will happen before the mmap_sem is taken, and thus reduces lock hold time (and thus the contention potential)

Quoted 3 lines
Quoted 1 line

The slab fast path doesn't sleep.

it does via might_sleep()

Hmm? That shouldn't sleep.

If it takes any time in a real workload then it should move into DEBUG_KERNEL too. But I doubt it. Something with your analysis is wrong.

-Andi

P.S.: Your email address bounces.

#5 lore raw

Re: [Patch 2/3] fast VMA recycling

Quoted 16 lines · Andi Kleen
Quoted 15 lines · Arjan van de Ven
Quoted 14 lines · Andi Kleen
Quoted 12 lines · Arjan van de Ven

This patch adds a per task-struct cache of a free vma.

In normal operation, it is a really common action during userspace mmap or malloc to first allocate a vma, and then find out that it can be merged, and thus free it again. In fact this is the case roughly 95% of the time.

In addition, this patch allows code to "prepopulate" the cache, and this is done as example for the x86_64 mmap codepath. The advantage of this prepopulation is that the memory allocation (which is a sleeping operation due to the GFP_KERNEL flag, potentially causing either a direct sleep or a voluntary preempt sleep) will happen before the mmap_sem is taken, and thus reduces lock hold time (and thus the contention potential)

Quoted 5 lines
Quoted 3 lines
Quoted 1 line

The slab fast path doesn't sleep.

it does via might_sleep()

Hmm? That shouldn't sleep.

see voluntary preempt.

Quoted 2 lines

If it takes any time in a real workload then it should move into DEBUG_KERNEL too. But I doubt it. Something with your analysis is wrong.

well I'm seeing contention; and this is one of the things that can be moved out of the lock easily, and especially given the high recycle rate of these things... looks worth it to me.

Quoted 1 line

P.S.: Your email address bounces.

sorry about that; made a typo when trying to figure out how to set up non-corrupting patches lkml

#6 lore raw

Re: [Patch 2/3] fast VMA recycling

Quoted 17 lines · Arjan van de Ven
Quoted 16 lines · Andi Kleen
Quoted 15 lines · Arjan van de Ven
Quoted 14 lines · Andi Kleen
Quoted 12 lines · Arjan van de Ven

This patch adds a per task-struct cache of a free vma.

In normal operation, it is a really common action during userspace mmap or malloc to first allocate a vma, and then find out that it can be merged, and thus free it again. In fact this is the case roughly 95% of the time.

In addition, this patch allows code to "prepopulate" the cache, and this is done as example for the x86_64 mmap codepath. The advantage of this prepopulation is that the memory allocation (which is a sleeping operation due to the GFP_KERNEL flag, potentially causing either a direct sleep or a voluntary preempt sleep) will happen before the mmap_sem is taken, and thus reduces lock hold time (and thus the contention potential)

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line

The slab fast path doesn't sleep.

it does via might_sleep()

Hmm? That shouldn't sleep.

see voluntary preempt.

Only when its time slice is used up but then it would sleep a bit later in user space. But it should be really a unlikely case and nothing to optimize for.

Quoted 7 lines
Quoted 3 lines

If it takes any time in a real workload then it should move into DEBUG_KERNEL too. But I doubt it. Something with your analysis is wrong.

well I'm seeing contention; and this is one of the things that can be moved out of the lock easily, and especially given the high recycle rate of these things... looks worth it to me.

I think you need a better analysis of what is actually happening instead of trying all kind of weird quick fragile hacks.

-Andi

#7 lore raw

Re: [Patch 2/3] fast VMA recycling

Quoted 3 lines · Andi Kleen
Quoted 1 line

see voluntary preempt.

Only when its time slice is used up

or if some other thread gets a higher dynamic prio

Quoted 1 line

but then it would sleep a bit later in user space.

... but that is without the semaphore held! (and that is the entire point of this patch, move the sleep moments to outside the lock holding area as much as possible, to reduce lock hold times)

#8 lore raw

Re: [Patch 2/3] fast VMA recycling

Quoted 5 lines · Arjan van de Ven
Quoted 3 lines · Andi Kleen
Quoted 1 line

see voluntary preempt.

Only when its time slice is used up

Quoted 7 lines

or if some other thread gets a higher dynamic prio

Quoted 2 lines

but then it would sleep a bit later
in user space.

... but that is without the semaphore held! (and that is the entire point of this patch, move the sleep moments to outside the lock holding area as much as possible, to reduce lock hold times)

And you verified this happens often in your workload?

Anyways, how about adding a down_no_preempt() or similar instead that won't voluntarily preempt?

-Andi

#9 lore raw

Re: [Patch 2/3] fast VMA recycling

In reply to Arjan van de Ven
Quoted 15 lines · Arjan van de Ven
Quoted 14 lines · Andi Kleen
Quoted 12 lines · Arjan van de Ven

This patch adds a per task-struct cache of a free vma.

In normal operation, it is a really common action during userspace mmap or malloc to first allocate a vma, and then find out that it can be merged, and thus free it again. In fact this is the case roughly 95% of the time.

In addition, this patch allows code to "prepopulate" the cache, and this is done as example for the x86_64 mmap codepath. The advantage of this prepopulation is that the memory allocation (which is a sleeping operation due to the GFP_KERNEL flag, potentially causing either a direct sleep or a voluntary preempt sleep) will happen before the mmap_sem is taken, and thus reduces lock hold time (and thus the contention potential)

Quoted 3 lines
Quoted 1 line

The slab fast path doesn't sleep.

it does via might_sleep()

so turn of the voluntary preempt bullshit.

#10 lore raw

Re: [Patch 2/3] fast VMA recycling

Quoted 16 lines · Christoph Hellwig
Quoted 15 lines · Arjan van de Ven
Quoted 14 lines · Andi Kleen
Quoted 12 lines · Arjan van de Ven

This patch adds a per task-struct cache of a free vma.

In normal operation, it is a really common action during userspace mmap or malloc to first allocate a vma, and then find out that it can be merged, and thus free it again. In fact this is the case roughly 95% of the time.

In addition, this patch allows code to "prepopulate" the cache, and this is done as example for the x86_64 mmap codepath. The advantage of this prepopulation is that the memory allocation (which is a sleeping operation due to the GFP_KERNEL flag, potentially causing either a direct sleep or a voluntary preempt sleep) will happen before the mmap_sem is taken, and thus reduces lock hold time (and thus the contention potential)

Quoted 5 lines
Quoted 3 lines
Quoted 1 line

The slab fast path doesn't sleep.

it does via might_sleep()

so turn of the voluntary preempt bullshit.

I think voluntary preempt is generally a good idea, but we should make it optional for down() since it can apparently cause bad side effects (like holding semaphores/mutexes for too long)

There would be two possible ways:

have default mutex_lock()/down() do a might_sleep() with preemption and have a separate variant that doesn't preempt or have the default non preempt and a separate variant that does preempt.

I think I would prefer the later because for preemption it probably makes often more sense to do the preemption on the up() not the down.

On the other hand one could argue that it's safer to only change it for mmap_sem, which would suggest a special variant without preemption and keep the current default.

Actually the non preempt variants probably should still have a might_sleep() for debugging, but in a variant that doesn't do preemption (might_sleep_no_preempt()?)

Ingo, what do you think?

-Andi

#11 lore raw

Re: [Patch 2/3] fast VMA recycling

Quoted 10 lines · Andi Kleen

I think voluntary preempt is generally a good idea, but we should make it optional for down() since it can apparently cause bad side effects (like holding semaphores/mutexes for too long)

There would be two possible ways:

have default mutex_lock()/down() do a might_sleep() with preemption and have a separate variant that doesn't preempt or have the default non preempt and a separate variant that does preempt.

better remove the stupid cond_resched() from might_sleep which from it's naming already is a debug thing and add it to those places where it makes sense.

#12 lore raw

Re: [Patch 2/3] fast VMA recycling

In reply to Arjan van de Ven
Quoted 3 lines · Arjan van de Ven

One could argue that this should be a generic slab feature (the preloading) but that only gives some of the gains and not all, and vma's are small creatures, with a high "recycling" rate in typical cases.

I think this is wrong, and far too narrow in useful scope to be merged. It's unnecessary bloat of task_struct and if this is really a problem, then there is a [performance] bug in the slab allocator. Please at least provide the slab statistics for what is going on, as the workload might well be thrashing the creation and destruction of slabs, which would be a much better thing to fix.

-ben

#13 lore raw

PATCH 3/3 prepopulate/cache cleared pages

In reply to Arjan van de Ven

This patch adds an entry for a cleared page to the task struct. The main purpose of this patch is to be able to pre-allocate and clear a page in a pagefault scenario before taking any locks (esp mmap_sem), opportunistically. Allocating+clearing a page is an very expensive operation that currently increases lock hold times quite bit (in a threaded environment that allocates/use/frees memory on a regular basis, this leads to contention).

This is probably the most controversial patch of the 3, since there is a potential to take up 1 page per thread in this cache. In practice it's not as bad as it sounds (a large degree of the pagefaults are anonymous and thus immediately use up the page). One could argue "let the VM reap these" but that has a few downsides; it increases locking needs but more, clearing a page is relatively expensive, if the VM reaps the page again in case it wasn't needed, the work was just wasted.

---
 arch/x86_64/mm/fault.c |    2 ++
 include/linux/mm.h     |    1 +
 include/linux/sched.h  |    1 +
 kernel/exit.c          |    4 ++++
 kernel/fork.c          |    1 +
 mm/mempolicy.c         |   37 +++++++++++++++++++++++++++++++++++++
 6 files changed, 46 insertions(+)
arch/x86_64/mm/fault.c +2 -0
Index: linux-work/arch/x86_64/mm/fault.c
===================================================================
@@ -375,6 +375,8 @@ asmlinkage void __kprobes do_page_fault(
 		goto bad_area_nosemaphore;
 
  again:
+	prepare_cleared_page();
+
 	/* When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
 	 * kernel and should generate an OOPS.  Unfortunatly, in the case of an
include/linux/mm.h +1 -0
Index: linux-work/include/linux/mm.h
===================================================================
@@ -1052,6 +1052,7 @@ void drop_pagecache(void);
 void drop_slab(void);
 
 extern void prepopulate_vma(void);
+extern void prepopulate_cleared_page(void);
 
 extern int randomize_va_space;
 
include/linux/sched.h +1 -0
Index: linux-work/include/linux/sched.h
===================================================================
@@ -839,6 +839,7 @@ struct task_struct {
 	struct reclaim_state *reclaim_state;
 
 	struct vm_area_struct *free_vma_cache;  /* keep 1 free vma around as cache */
+	struct page *cleared_page;		/* optionally keep 1 cleared page around */
 
 	struct dentry *proc_dentry;
 	struct backing_dev_info *backing_dev_info;
kernel/exit.c +4 -0
Index: linux-work/kernel/exit.c
===================================================================
@@ -882,6 +882,10 @@ fastcall NORET_TYPE void do_exit(long co
 		kmem_cache_free(vm_area_cachep, tsk->free_vma_cache);
 	tsk->free_vma_cache = NULL;
 
+	if (tsk->cleared_page)
+		__free_page(tsk->cleared_page);
+	tsk->cleared_page = NULL;
+
 	/* PF_DEAD causes final put_task_struct after we schedule. */
 	preempt_disable();
 	BUG_ON(tsk->flags & PF_DEAD);
kernel/fork.c +1 -0
Index: linux-work/kernel/fork.c
===================================================================
@@ -180,6 +180,7 @@ static struct task_struct *dup_task_stru
 	atomic_set(&tsk->usage,2);
 	atomic_set(&tsk->fs_excl, 0);
 	tsk->free_vma_cache = NULL;
+	tsk->cleared_page = NULL;
 
 	return tsk;
 }
mm/mempolicy.c +37 -0
Index: linux-work/mm/mempolicy.c
===================================================================
@@ -1231,6 +1231,13 @@ alloc_page_vma(gfp_t gfp, struct vm_area
 {
 	struct mempolicy *pol = get_vma_policy(current, vma, addr);
 
+	if ( (gfp & __GFP_ZERO) && current->cleared_page) {
+		struct page *addr;
+		addr = current->cleared_page;
+		current->cleared_page = NULL;
+		return addr;
+	}
+
 	cpuset_update_task_memory_state();
 
 	if (unlikely(pol->policy == MPOL_INTERLEAVE)) {
@@ -1242,6 +1249,36 @@ alloc_page_vma(gfp_t gfp, struct vm_area
 	return __alloc_pages(gfp, 0, zonelist_policy(gfp, pol));
 }
 
+
+/**
+ *	prepare_cleared_page - populate the per-task zeroed-page cache
+ *
+ *	This function populates the per-task cache with one zeroed page
+ *	(if there wasn't one already)
+ *	The idea is that this (expensive) clearing is done before any
+ *	locks are taken, speculatively, and that when the page is actually
+ *	needed under a lock, it is ready for immediate use
+ */
+
+void prepare_cleared_page(void)
+{
+	struct mempolicy *pol = current->mempolicy;
+
+	if (current->cleared_page)
+		return;
+
+	cpuset_update_task_memory_state();
+
+	if (!pol)
+		pol = &default_policy;
+	if (pol->policy == MPOL_INTERLEAVE)
+		current->cleared_page = alloc_page_interleave(
+			GFP_HIGHUSER | __GFP_ZERO, 0, interleave_nodes(pol));
+	current->cleared_page = __alloc_pages(GFP_USER | __GFP_ZERO,
+			0, zonelist_policy(GFP_USER, pol));
+}
+
+
 /**
  * 	alloc_pages_current - Allocate pages.
  *
#14 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 8 lines · Arjan van de Ven

This patch adds an entry for a cleared page to the task struct. The main purpose of this patch is to be able to pre-allocate and clear a page in a pagefault scenario before taking any locks (esp mmap_sem), opportunistically. Allocating+clearing a page is an very expensive operation that currently increases lock hold times quite bit (in a threaded environment that allocates/use/frees memory on a regular basis, this leads to contention).

Quoted 7 lines

This is probably the most controversial patch of the 3, since there is a potential to take up 1 page per thread in this cache. In practice it's not as bad as it sounds (a large degree of the pagefaults are anonymous and thus immediately use up the page). One could argue "let the VM reap these" but that has a few downsides; it increases locking needs but more, clearing a page is relatively expensive, if the VM reaps the page again in case it wasn't needed, the work was just wasted.

Looks like an incredible bad hack. What workload was that again where it helps? And how much? I think before we can consider adding that ugly code you would a far better rationale.

-Andi

#15 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 17 lines · Andi Kleen
Quoted 8 lines · Arjan van de Ven

This patch adds an entry for a cleared page to the task struct. The main purpose of this patch is to be able to pre-allocate and clear a page in a pagefault scenario before taking any locks (esp mmap_sem), opportunistically. Allocating+clearing a page is an very expensive operation that currently increases lock hold times quite bit (in a threaded environment that allocates/use/frees memory on a regular basis, this leads to contention).

Quoted 7 lines

This is probably the most controversial patch of the 3, since there is a potential to take up 1 page per thread in this cache. In practice it's not as bad as it sounds (a large degree of the pagefaults are anonymous and thus immediately use up the page). One could argue "let the VM reap these" but that has a few downsides; it increases locking needs but more, clearing a page is relatively expensive, if the VM reaps the page again in case it wasn't needed, the work was just wasted.

Quoted 3 lines

Looks like an incredible bad hack. What workload was that again where it helps? And how much? I think before we can consider adding that ugly code you would a far better rationale.

yes, the patch is controversial technologically, and Arjan pointed it out above. This is nothing new - and Arjan probably submitted this to lkml so that he can get contructive feedback.

What Arjan did is quite nifty, as it moves the page clearing out from under the mmap_sem-held critical section. How that is achieved is really secondary, it's pretty clear that it could be done in some nicer way. Furthermore, we havent seen any significant advance in that area of the kernel [threaded mmap() performance] in quite some time, so contributions are both welcome and encouraged.

But Andi, regarding the tone of your reply - it is really getting out of hand! Please lean back and take a deep breath. Maybe you should even sleep over it. And when you come back, please start being _much_ more respectful of other people's work. You are not doing Linux _any_ favor by flaming away so mindlessly ... Arjan is a longtime contributor and he can probably take your flames just fine (as I took your flames just fine the other day), but we should really use a _much_ nicer tone on lkml.

You might not realize it, but replies like this can scare away novice contributors forever! You could scare away the next DaveM. Or the next Alan Cox. Or the next Andi Kleen. Heck, much milder replies can scare away even longtime contributors: see Rusty Russell's comments from a couple of days ago ...

And no, i dont accept the lame "dont come into the kitchen if you cant stand the flames" excuse: your reply was totally uncalled for, was totally undeserved and was totally unnecessary. It was incredibly mean spirited, and the only effect it can possibly have on the recipient is harm. And it's not like this happened in the heat of a longer discussion or due to some misunderstanding: you flamed away _right at the beginning_, right as the first reply to the patch submission. Shame on you! Is it that hard to reply:

"Hm, nice idea, I wish it were cleaner though because
<insert explanation here>. How about <insert nifty idea here>."

[ Btw., i could possibly have come up with a good solution for this
during the time i had to waste on this reply. ]

Ingo

#16 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 3 lines · Ingo Molnar

What Arjan did is quite nifty, as it moves the page clearing out from under the mmap_sem-held critical section.

So that was the point not the rescheduling under lock? Or both?

BTW since it touches your area of work you could comment what you think about not using voluntary preempt points for fast sleep locks like I later proposed.

Quoted 2 lines

How that is achieved is really
secondary, it's pretty clear that it could be done in some nicer way.

Great we agree then.

Quoted 4 lines

And no, i dont accept the lame "dont come into the kitchen if you cant stand the flames" excuse: your reply was totally uncalled for, was totally undeserved

Well he didn't supply any data so I asked for more.

Quoted 2 lines

and was totally unnecessary. It was incredibly mean spirited,

Sorry, but I don't think that's true. Mean spirited would be "we don't care, go away". When I think that I generally don't answer the email.

I could have perhaps worded it a bit nicer, agreed, but I think the core of my reply - we need more analysis for that - was quite constructive. At least for one of the subproblems I even proposed a better solution. If there is more analysis of the problem maybe I can help even for more of it.

Also it's probably quite clear that added lots of special purpose caches to task_struct for narrow purpose isn't a good way to do optimization.

The mail was perhaps a bit harsher than it should have been because I think Arjan should have really known better...

Quoted 5 lines

You might not realize it, but replies like this can scare away novice contributors forever! You could scare away the next DaveM. Or the next Alan Cox. Or the next Andi Kleen. Heck, much milder replies can scare away even longtime contributors: see Rusty Russell's comments from a couple of days ago ...

I must say I'm feeling a bit unfairly attacked here because I think I generally try to help new patch submitters (at least if their basic ideas are sound even if some details are wrong)

e.g. you might notice that a lot of patches from new contributors go smoother into x86-64 than into i386.

-Andi

#17 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 13 lines · Andi Kleen
Quoted 1 line · Ingo Molnar

What Arjan did is quite nifty, as it moves the page clearing out from under the mmap_sem-held critical section.

So that was the point not the rescheduling under lock? Or both?

BTW since it touches your area of work you could comment what you think about not using voluntary preempt points for fast sleep locks like I later proposed.

Quoted 5 lines
Quoted 1 line

How that is achieved is really secondary, it's pretty clear that it could be done in some nicer way.

Great we agree then.

I'm worried about the situation where we allocate but don't use the new page: it blows quite a bit of cache. Then, when we do get around to using it, it will be cold(er).

Good to see someone trying to improve this area, though.

Signature · 2 lines
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com 
#18 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 3 lines · Nick Piggin

I'm worried about the situation where we allocate but don't use the new page: it blows quite a bit of cache. Then, when we do get around to using it, it will be cold(er).

couldnt the new pte be flipped in atomically via cmpxchg? That way we could do the page clearing close to where we are doing it now, but without holding the mmap_sem.

to solve the pte races we could use a bit in the [otherwise empty] pte to signal "this pte can be flipped in from now on", which bit would automatically be cleared if mprotect() or munmap() is called over that range (without any extra changes to those codepaths). (in the rare case if the cmpxchg() fails, we go into a slowpath that drops the newly allocated page, re-lookups the vma and the pte, etc.)

Ingo

#19 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 8 lines · Ingo Molnar
Quoted 1 line · Nick Piggin

I'm worried about the situation where we allocate but don't use the new page: it blows quite a bit of cache. Then, when we do get around to using it, it will be cold(er).

couldnt the new pte be flipped in atomically via cmpxchg? That way we could do the page clearing close to where we are doing it now, but without holding the mmap_sem.

We have nothing to pin the pte page with if we're not holding the mmap_sem.

Quoted 2 lines

to solve the pte races we could use a bit in the [otherwise empty] pte to signal "this pte can be flipped in from now on", which bit would automatically be cleared if mprotect() or munmap() is called over that range (without any extra changes to those codepaths). (in the rare case if the cmpxchg() fails, we go into a slowpath that drops the newly allocated page, re-lookups the vma and the pte, etc.)

Page still isn't pinned. You might be able to do something wild like disable preemption and interrupts (to stop the TLB IPI) to get a pin on the pte pages.

But even in that case, there is nothing in the mmu gather / tlb flush interface that guarantees an architecture cannot free the page table pages immediately (ie without waiting for the flush IPI). This would make sense on architectures that don't walk the page tables in hardware.

Arjan, just to get an idea of your workload: obviously it is a mix of read and write on the mmap_sem (read only will not really benefit from reducing lock width because cacheline transfers will still be there). Is it coming from brk() from the allocator? Someone told me a while ago that glibc doesn't have a decent amount of hysteresis in its allocator and tends to enter the kernel quite a lot... that might be something to look into.

Signature · 2 lines
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com 
#20 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 6 lines · Nick Piggin
Quoted 3 lines

couldnt the new pte be flipped in atomically via cmpxchg? That way we could do the page clearing close to where we are doing it now, but without holding the mmap_sem.

We have nothing to pin the pte page with if we're not holding the mmap_sem.

why does it have to be pinned? The page is mostly private to this thread until it manages to flip it into the pte. Since there's no pte presence, there's no swapout possible [here i'm assuming anonymous malloc() memory, which is the main focus of Arjan's patch]. Any parallel unmapping of that page will be caught and the installation of the page will be prevented by the 'bit-spin-lock' embedded in the pte.

Quoted 5 lines

But even in that case, there is nothing in the mmu gather / tlb flush interface that guarantees an architecture cannot free the page table pages immediately (ie without waiting for the flush IPI). This would make sense on architectures that don't walk the page tables in hardware.

but the page wont be found by any other CPU, so it wont be freed! It is private to this CPU. The page has no pte presence. It will only be present and lookupable as a result of the cmpxchg() flipping the page into the pte.

Ingo

#21 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 11 lines · Ingo Molnar
Quoted 4 lines · Nick Piggin
Quoted 2 lines

couldnt the new pte be flipped in atomically via cmpxchg? That way we could do the page clearing close to where we are doing it now, but without holding the mmap_sem.

We have nothing to pin the pte page with if we're not holding the mmap_sem.

why does it have to be pinned? The page is mostly private to this thread until it manages to flip it into the pte. Since there's no pte presence, there's no swapout possible [here i'm assuming anonymous malloc() memory, which is the main focus of Arjan's patch]. Any parallel unmapping of that page will be caught and the installation of the page will be prevented by the 'bit-spin-lock' embedded in the pte.

No, I was talking about page table pages, rather than the newly allocated page.

But I didn't realise you wanted the bit lock to go the other way as well (ie. a real bit spinlock). Seems like that would have to add overhead somewhere.

Quoted 6 lines
Quoted 2 lines

But even in that case, there is nothing in the mmu gather / tlb flush interface that guarantees an architecture cannot free the page table pages immediately (ie without waiting for the flush IPI). This would make sense on architectures that don't walk the page tables in hardware.

but the page wont be found by any other CPU, so it wont be freed! It is private to this CPU. The page has no pte presence. It will only be present and lookupable as a result of the cmpxchg() flipping the page into the pte.

Yeah, as I said above, the newly allocated page is fine, it is the page table pages I'm worried about.

Signature · 2 lines
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com 
#22 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 3 lines · Nick Piggin

Yeah, as I said above, the newly allocated page is fine, it is the page table pages I'm worried about.

page tables are easy because we zero them on free (as a side effect of all the pte_clears)

I did a experimental hack some time ago to set a new struct page flag when a page is known to be zeroed on freeing and use that for a GFP_ZERO allocation (basically skip the clear_page when that flag was set)

The idea was to generalize the old page table reuse caches which Ingo removed at some point.

It only works of course if the allocations and freeing of page tables roughly matches up. In theory on could have split the lists of the buddy allocator too into zero/non zero pages to increase the hit rate, but I didn't attempt this.

I unfortunately don't remember the outcome, dropped it for some reason.

-Andi

#23 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 7 lines · Andi Kleen
Quoted 3 lines · Nick Piggin

Yeah, as I said above, the newly allocated page is fine, it is the page table pages I'm worried about.

page tables are easy because we zero them on free (as a side effect of all the pte_clears)

But once the page table is freed, it's likely to get used for something else, whether for another page table or something different doesn't
matter: this mm can no longer blindly mess with the entries within in.

Nick's point is that it's mmap_sem (or mm_users 0) guarding against the page table being freed.

Hugh

#24 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

In reply to Nick Piggin
Quoted 4 lines

Arjan, just to get an idea of your workload: obviously it is a mix of read and write on the mmap_sem (read only will not really benefit from reducing lock width because cacheline transfers will still be there).

yeah it's threads that each allocate, use and then free memory with mmap()

Quoted 4 lines

Is it coming from brk() from the allocator? Someone told me a while ago that glibc doesn't have a decent amount of hysteresis in its allocator and tends to enter the kernel quite a lot... that might be something to look into.

we already are working on that angle; I just posted the kernel stuff as a side effect basically

#25 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 9 lines · Arjan van de Ven
Quoted 3 lines

Arjan, just to get an idea of your workload: obviously it is a mix of read and write on the mmap_sem (read only will not really benefit from reducing lock width because cacheline transfers will still be there).

yeah it's threads that each allocate, use and then free memory with mmap()

Quoted 9 lines
Quoted 4 lines

Is it coming from brk() from the allocator? Someone told me a while ago that glibc doesn't have a decent amount of hysteresis in its allocator and tends to enter the kernel quite a lot... that might be something to look into.

we already are working on that angle; I just posted the kernel stuff as a side effect basically

OK.

[aside]
Actually I have a scalability improvement for rwsems, that moves the actual task wakeups out from underneath the rwsem spinlock in the up() paths. This was useful exactly on a mixed read+write workload on mmap_sem.

The difference was quite large for the "generic rwsem" algorithm because it uses the spinlock in fastpaths a lot more than the xadd algorithm. I think x86-64 uses the former, which is what I presume you're testing with?

Obviously this is a slightly different issue from the one you're trying to address here, but I'll dig out patch when I get some time and you can see if it helps.

Signature · 2 lines
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com 
#26 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 8 lines · Nick Piggin

[aside]
Actually I have a scalability improvement for rwsems, that moves the actual task wakeups out from underneath the rwsem spinlock in the up() paths. This was useful exactly on a mixed read+write workload on mmap_sem.

The difference was quite large for the "generic rwsem" algorithm because it uses the spinlock in fastpaths a lot more than the xadd algorithm. I think x86-64 uses the former, which is what I presume you're testing with?

I used the generic algorithm because Andrea originally expressed some doubts on the correctness of the xadd algorithms and after trying to understand them myself I wasn't sure myself. Generic was the safer choice.

But if someone can show convincing numbers that XADD rwsems are faster for some workload we can switch. I guess they are tested well enough now on i386.

Or would your scalability improvement remove that difference (if it really exists)?

-Andi

#27 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 3 lines · Andi Kleen

I used the generic algorithm because Andrea originally expressed some doubts on the correctness of the xadd algorithms and after trying to understand them myself I wasn't sure myself. Generic was the safer choice.

Amittedly we never had bugreports for the xadd ones, but trust me that's not a good reason to assume that they must be correct. I'd be more confortable if somebody would provide a demonstration of their correctnes. Overall I gave up also because I felt that the small gain was by far not worth the risk.

#28 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

In reply to Andi Kleen
Quoted 13 lines · Andi Kleen
Quoted 8 lines · Nick Piggin

[aside]
Actually I have a scalability improvement for rwsems, that moves the actual task wakeups out from underneath the rwsem spinlock in the up() paths. This was useful exactly on a mixed read+write workload on mmap_sem.

The difference was quite large for the "generic rwsem" algorithm because it uses the spinlock in fastpaths a lot more than the xadd algorithm. I think x86-64 uses the former, which is what I presume you're testing with?

Quoted 8 lines

I used the generic algorithm because Andrea originally expressed some doubts on the correctness of the xadd algorithms and after trying to understand them myself I wasn't sure myself. Generic was the safer choice.

But if someone can show convincing numbers that XADD rwsems are faster for some workload we can switch. I guess they are tested well enough now on i386.

Or would your scalability improvement remove that difference (if it really exists)?

Here is a forward port of my scalability improvement, untested.

Unfortunately I didn't include absolute performance results, but the changelog indicates that there was some noticable delta between the rwsem implementations (and that's what I vaguely remember).

Note: this was with volanomark, which can be quite variable at the best of times IIRC.

Note2: this was on a 16-way NUMAQ, which had the interconnect performance of a string between two cans compared to a modern x86-64 of smaller size, so it may be harder to notice an improvement.

Signature · 1 line
SUSE Labs, Novell Inc.

Move wakeups out from under the rwsem's wait_lock spinlock.

This reduces that lock's contention by a factor of around 10 on a 16-way NUMAQ running volanomark, however cacheline contention on the rwsem's "activity" drowns out these small improvements when using the i386 "optimised" rwsem:

unpatched:
55802519 total 32.3097
23325323 default_idle 364458.1719
22084349 .text.lock.futex 82404.2873

2369107 queue_me                                 24678.1979
1875296 unqueue_me                               9767.1667
1202258 .text.lock.rwsem                         46240.6923
941801 finish_task_switch                       7357.8203
787101 __wake_up                                12298.4531
645252 drop_key_refs                            13442.7500
362789 futex_wait                               839.7894
333294 futex_wake                               1487.9196
146797 rwsem_down_read_failed                   436.8958
 82788 .text.lock.dev                           221.3583
 81221 try_to_wake_up                           133.5872

+rwsem-scale:
58120260 total 33.6458
25482132 default_idle 398158.3125
22774675 .text.lock.futex 84980.1306

2517797 queue_me                                 26227.0521
1953424 unqueue_me                               10174.0833
1063068 finish_task_switch                       8305.2188
834793 __wake_up                                13043.6406
674570 drop_key_refs                            14053.5417
371811 futex_wait                               860.6736
343398 futex_wake                               1533.0268
155419 try_to_wake_up                           255.6234
114704 .text.lock.rwsem                         4411.6923

The rwsem-spinlock implementation, however, is improved significantly more, and now gets volanomark performance similar to the xadd rwsem:

unpatched:
30850964 total 18.1787
18986006 default_idle 296656.3438
3989183 .text.lock.rwsem_spinlock 40294.7778
2990161 .text.lock.futex 32501.7500

549707 finish_task_switch                       4294.5859
535327 __down_read                              3717.5486
452721 queue_me                                 4715.8438
439725 __up_read                                9160.9375
396273 __wake_up                                6191.7656
326595 unqueue_me                               1701.0156

+rwsem-scale:
25378268 total 14.9537
13325514 default_idle 208211.1562
3675634 .text.lock.futex 39952.5435
2908629 .text.lock.rwsem_spinlock 28239.1165

628115 __down_read                              4361.9097
607417 finish_task_switch                       4745.4453
588031 queue_me                                 6125.3229
571169 __up_read                                11899.3542
436795 __wake_up                                6824.9219
416788 unqueue_me                               2170.7708
lib/rwsem.c +33 -41
Index: linux-2.6/lib/rwsem.c
===================================================================
@@ -36,14 +36,15 @@ void rwsemtrace(struct rw_semaphore *sem
  * - the spinlock must be held by the caller
  * - woken process blocks are discarded from the list after having task zeroed
  * - writers are only woken if downgrading is false
+ *
+ * The spinlock will be dropped by this function.
  */
-static inline struct rw_semaphore *
-__rwsem_do_wake(struct rw_semaphore *sem, int downgrading)
+static inline void
+__rwsem_do_wake(struct rw_semaphore *sem, int downgrading, unsigned long flags)
 {
+	LIST_HEAD(wake_list);
 	struct rwsem_waiter *waiter;
-	struct task_struct *tsk;
-	struct list_head *next;
-	signed long oldcount, woken, loop;
+	signed long oldcount, woken;
 
 	rwsemtrace(sem, "Entering __rwsem_do_wake");
 
@@ -72,12 +73,8 @@ __rwsem_do_wake(struct rw_semaphore *sem
 	 * It is an allocated on the waiter's stack and may become invalid at
 	 * any time after that point (due to a wakeup from another source).
 	 */
-	list_del(&waiter->list);
-	tsk = waiter->task;
-	smp_mb();
-	waiter->task = NULL;
-	wake_up_process(tsk);
-	put_task_struct(tsk);
+	list_move_tail(&waiter->list, &wake_list);
+	waiter->flags = 0;
 	goto out;
 
 	/* don't want to wake any writers */
@@ -94,41 +91,37 @@ __rwsem_do_wake(struct rw_semaphore *sem
  readers_only:
 	woken = 0;
 	do {
-		woken++;
-
-		if (waiter->list.next == &sem->wait_list)
+		list_move_tail(&waiter->list, &wake_list);
+		waiter->flags = 0;
+		woken += RWSEM_ACTIVE_BIAS - RWSEM_WAITING_BIAS;
+		if (list_empty(&sem->wait_list))
 			break;
 
-		waiter = list_entry(waiter->list.next,
+		waiter = list_entry(sem->wait_list.next,
 					struct rwsem_waiter, list);
-
 	} while (waiter->flags & RWSEM_WAITING_FOR_READ);
 
-	loop = woken;
-	woken *= RWSEM_ACTIVE_BIAS - RWSEM_WAITING_BIAS;
 	if (!downgrading)
 		/* we'd already done one increment earlier */
 		woken -= RWSEM_ACTIVE_BIAS;
 
 	rwsem_atomic_add(woken, sem);
 
-	next = sem->wait_list.next;
-	for (; loop > 0; loop--) {
-		waiter = list_entry(next, struct rwsem_waiter, list);
-		next = waiter->list.next;
+out:
+	spin_unlock_irqrestore(&sem->wait_lock, flags);
+	while (!list_empty(&wake_list)) {
+		struct task_struct *tsk;
+		waiter = list_entry(wake_list.next, struct rwsem_waiter, list);
+		list_del(&waiter->list);
 		tsk = waiter->task;
-		smp_mb();
 		waiter->task = NULL;
+		smp_mb();
 		wake_up_process(tsk);
 		put_task_struct(tsk);
 	}
 
-	sem->wait_list.next = next;
-	next->prev = &sem->wait_list;
-
- out:
 	rwsemtrace(sem, "Leaving __rwsem_do_wake");
-	return sem;
+	return;
 
 	/* undo the change to count, but check for a transition 1->0 */
  undo:
@@ -145,12 +138,13 @@ rwsem_down_failed_common(struct rw_semap
 			struct rwsem_waiter *waiter, signed long adjustment)
 {
 	struct task_struct *tsk = current;
+	unsigned long flags;
 	signed long count;
 
 	set_task_state(tsk, TASK_UNINTERRUPTIBLE);
 
 	/* set up my own style of waitqueue */
-	spin_lock_irq(&sem->wait_lock);
+	spin_lock_irqsave(&sem->wait_lock, flags);
 	waiter->task = tsk;
 	get_task_struct(tsk);
 
@@ -161,14 +155,12 @@ rwsem_down_failed_common(struct rw_semap
 
 	/* if there are no active locks, wake the front queued process(es) up */
 	if (!(count & RWSEM_ACTIVE_MASK))
-		sem = __rwsem_do_wake(sem, 0);
-
-	spin_unlock_irq(&sem->wait_lock);
+		__rwsem_do_wake(sem, 0, flags);
+	else
+		spin_unlock_irqrestore(&sem->wait_lock, flags);
 
 	/* wait to be given the lock */
-	for (;;) {
-		if (!waiter->task)
-			break;
+	while (waiter->task) {
 		schedule();
 		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
 	}
@@ -227,9 +219,9 @@ struct rw_semaphore fastcall *rwsem_wake
 
 	/* do nothing if list empty */
 	if (!list_empty(&sem->wait_list))
-		sem = __rwsem_do_wake(sem, 0);
-
-	spin_unlock_irqrestore(&sem->wait_lock, flags);
+		__rwsem_do_wake(sem, 0, flags);
+	else
+		spin_unlock_irqrestore(&sem->wait_lock, flags);
 
 	rwsemtrace(sem, "Leaving rwsem_wake");
 
@@ -251,9 +243,9 @@ struct rw_semaphore fastcall *rwsem_down
 
 	/* do nothing if list empty */
 	if (!list_empty(&sem->wait_list))
-		sem = __rwsem_do_wake(sem, 1);
-
-	spin_unlock_irqrestore(&sem->wait_lock, flags);
+		__rwsem_do_wake(sem, 1, flags);
+	else
+		spin_unlock_irqrestore(&sem->wait_lock, flags);
 
 	rwsemtrace(sem, "Leaving rwsem_downgrade_wake");
 	return sem;
lib/rwsem-spinlock.c +36 -40

151 lines not on this page · raw message

#29 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

Quoted 6 lines · Nick Piggin

Here is a forward port of my scalability improvement, untested.

Unfortunately I didn't include absolute performance results, but the changelog indicates that there was some noticable delta between the rwsem implementations (and that's what I vaguely remember).

Quoted 7 lines

Note: this was with volanomark, which can be quite variable at the best of times IIRC.

Note2: this was on a 16-way NUMAQ, which had the interconnect performance of a string between two cans compared to a modern x86-64 of smaller size, so it may be harder to notice an improvement.

Oh, I remember one performance caveat of this code on preempt kernels:
at very high loads, (ie. lots of tasks being woken in the up path), the wakeup code would end up doing a lot of context switches to and from the tasks it is waking up.

This could be easily solved by disabling preempt (and would be still better in terms of interrupt latency and lock hold times), however I never got around to implementing that.

Signature · 2 lines
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com 
#30 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

In reply to Ingo Molnar
Quoted 20 lines · Ingo Molnar
Quoted 17 lines · Andi Kleen
Quoted 15 lines · Arjan van de Ven

This patch adds an entry for a cleared page to the task struct. The main purpose of this patch is to be able to pre-allocate and clear a page in a pagefault scenario before taking any locks (esp mmap_sem), opportunistically. Allocating+clearing a page is an very expensive operation that currently increases lock hold times quite bit (in a threaded environment that allocates/use/frees memory on a regular basis, this leads to contention).

This is probably the most controversial patch of the 3, since there is a potential to take up 1 page per thread in this cache. In practice it's not as bad as it sounds (a large degree of the pagefaults are anonymous and thus immediately use up the page). One could argue "let the VM reap these" but that has a few downsides; it increases locking needs but more, clearing a page is relatively expensive, if the VM reaps the page again in case it wasn't needed, the work was just wasted.

Quoted 7 lines
Quoted 3 lines

Looks like an incredible bad hack. What workload was that again where it helps? And how much? I think before we can consider adding that ugly code you would a far better rationale.

yes, the patch is controversial technologically, and Arjan pointed it out above. This is nothing new - and Arjan probably submitted this to lkml so that he can get contructive feedback.

Actually, I think I have to back Andi here. This looked like patch for inclusion (signed-off, cc-ed Andrew). And yes, Arjan pointed out that it is controversial, but the way patch was worded I could imagine Andrew merging it...
Pavel

Signature · 1 line
Web maintainer for suspend.sf.net (www.sf.net/projects/suspend) wanted...
#31 lore raw

Re: [Patch 3/3] prepopulate/cache cleared pages

In reply to Arjan van de Ven

Just a random idea, offered with little real understanding of what's going on ...

Instead of a per-task clear page, how about a per-cpu clear page, or short queue of clear pages?

This lets the number of clear pages be throttled to whatever is worth it. And it handles such cases as a few threads using the clear pages rapidly, while many other threads don't need any, with a much higher "average usefulness" per clear page (meaning the average time a cleared page sits around wasting memory prior to its being used is much shorter.)

Some locking would still be needed, but per-cpu locking is a separate, quicker beast than something like mmap_sem.

Mind you, I am not commenting one way or the other on whether any of this is a good idea. Not my expertise ...

Signature · 3 lines
                  I won't rest till it's the best ...
                  Programmer, Linux Scalability
                  Paul Jackson <[email protected]> 1.925.600.0401