2.6.16-rc4-mm2
Subsystems (13)
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/
- Sam's new section-mismatch warning code detects 358 errors in my alpha build, and a quick sampling indicates that they're real. Once this hits mainline things will get somewhat messy.
- The git-blktrace tree was dropped, due to a bad disagreement with the relayfs rework in Greg's tree.
- Various buggy patches which were in -mm1 were dropped. Should be better. (ie: some new, more interesting bugs).
Boilerplate:
- See the `hot-fixes' directory for any important updates to this patchset.
- To fetch an -mm tree using git, use (for example)
git fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git v2.6.16-rc2-mm1
- -mm kernel commit activity can be reviewed by subscribing to the mm-commits mailing list.
echo "subscribe mm-commits" | mail [email protected]
- If you hit a bug in -mm and it's not obvious which patch caused it, it is most valuable if you can perform a bisection search to identify which patch introduced the bug. Instructions for this process are at
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt
But beware that this process takes some time (around ten rebuilds and reboots), so consider reporting the bug first and if we cannot immediately identify the faulty patch, then perform the bisection search.
- When reporting bugs, please try to Cc: the relevant maintainer and mailing list on any email.
Changes since 2.6.16-rc4-mm1:
linus.patch
git-acpi.patch
git-alsa.patch
git-audit-master.patch
git-cfq.patch
git-cifs.patch
git-cpufreq.patch
git-drm.patch
git-ia64.patch
git-infiniband.patch
git-input.patch
git-jfs.patch
git-kbuild.patch
git-libata-all.patch
git-netdev-all.patch
git-net.patch
git-ntfs.patch
git-ocfs2.patch
git-powerpc.patch
git-sym2.patch
git-pcmcia.patch
git-scsi-misc.patch
git-scsi-rc-fixes.patch
git-sas-jg.patch
git-sparc64.patch
git-watchdog.patch
git-xfs.patch
git-cryptodev.patch
git-viro-bird-fixes.patch
git-viro-bird-m32r.patch
git-viro-bird-m68k.patch
git-viro-bird-xfs.patch
git-viro-bird-uml.patch
git-viro-bird-frv.patch
git-viro-bird-misc.patch
git-viro-bird-upf.patch
git-viro-bird-volatile.patch
git-viro-bird-endian.patch
git trees.
-oom-kill-children-accounting.patch -terminate-process-that-fails-on-a-constrained-allocation-v3.patch -i386-need-to-pass-virtual-address-to-smp_read_mpc.patch -cfi_cmdset_0001-fix-range-for-cache-invalidation.patch -spi-fix-modular-master-driver-remove-and-device-suspend-remove.patch -x86_64-dont-set-config_debug_info-in-defconfig.patch -cpu-hotplug-documentation-fix.patch -suspend-to-ram-allow-video-options-to-be-set-at-runtime.patch -suspend-to-ram-allow-video-options-to-be-set-at-runtime-update.patch -fix-units-in-mbind-check.patch -fix-race-condition-in-hvc-console.patch -daemonize-detach-from-current-namespace.patch -fix-snd-usb-audio-in-32-bit-compat-environemt.patch -pktcdvd-correctly-set-rq-cmd_len-in-pkt_generic_packet.patch -pktcdvd-rename-functions-and-make-their-return-values-sane.patch -pktcdvd-remove-useless-printk-statements.patch -pktcdvd-fix-the-logic-in-the-pkt_writable_track-function.patch -pktcdvd-only-return-erofs-when-appropriate.patch -modules-with-old-style-parameters-wont-load.patch -modules-with-old-style-parameters-wont-load-fix.patch -v9fs-update-documentation-and-fix-debug-flag.patch -powermac-fix-loss-of-ethernet-phy-on-sleep.patch -fix-undefined-symbols-for-nommu-architecture-improved-version.patch -fix-compile-for-config_sysvipc=n-or-config_sysctl=n.patch -reset-pci-device-state-to-unknown-after-disabled.patch -ipw2200-suppress-warning-message.patch -drivers-fc4-fcc-memset-correct-length.patch -firmware-fix-bug-in-fw_realloc_buffer.patch -spi-per-transfer-overrides-for-wordsize-and-clocking.patch -sem2mutex-drivers-media-2.patch -sky2-fix-a-hang-on-yukon-ec-0xb6-rev-1.patch -gregkh-pci-acpiphp-add-new-bus-to-acpi.patch -pci-pci-quirk-for-asus-a8v-and-a8v-deluxe-motherboards.patch -usb-zc0301-driver-updates.patch -page-migration-fix-mpol_interleave-behavior-for-migration-via.patch -page-migration-fix-mpol_interleave-behavior-for-migration-via-fix.patch -pci-cardbus-cards-hidden-needs-pci=assign-busses-to-fix.patch -pci-cardbus-cards-hidden-needs-pci=assign-busses-to-fix-tidy.patch -pci-cardbus-cards-hidden-needs-pci=assign-busses-to-fix-tidy-fix.patch -include-asm-m68k-irqh-remove-unused-define-enable_irq_nosync.patch -radeonfb-resume-support-for-samsung-p35-laptops.patch
Merged
+cache-align-futex-hash-buckets.patch
futex speedup (not final)
+m32r-enable-asm-code-optimization.patch +m32r-fix-and-update-for-gcc-40.patch +remove-module_parm.patch
+remove-module_parm-fix.patch
+snd-cs4236-tpyo-fix.patch +alsa-fix-bogus-snd_device_free-in-opl3-ossc.patch +pnp-bus-type-fix.patch +uml-correct-error-messages-in-cow-driver.patch +uml-fix-usage-of-kernel_errno-in-place-of-errno.patch +uml-fix-unused-attribute.patch +uml-os_connect_socket-error-path-fixup.patch +uml-better-error-reporting-for-read_output.patch +uml-tidying-cow-code.patch +vgacon-no-vertical-resizing-on-ega.patch +kprobes-causes-nx-protection-fault-on-i686-smp.patch +powerpc-fix-altivec_unavailable_exception-oopses.patch +cfi-init-wait-queue-in-chip-struct.patch +voyager-fix-boot-panic-by-adding-topology-export.patch +voyager-fix-the-cpu_possible_map-to-make-voyager-boot-again.patch +page-migration-fix-mpol_interleave-behavior-for-migration-via.patch +x86-fix-smp-boot-sequence.patch +x86-fix-smp-boot-sequence-fix.patch +gbefb-ip32-gbefb-depth-change-fix.patch +gbefb-set-default-of-fb_gbe_mem-to-4-mb.patch +au1100fb-replaced-io_remap_page_range-with-io_remap_pfn_range.patch +asiliantfb-fix-pseudo_palette-setup-in-asiliantfb_setcolreg.patch +flags-parameter-for-linkat.patch +flags-parameter-for-linkat-fix.patch +vmscan-fix-zone_reclaim.patch
Current 2.6.16 queue. Some of these are a bit questionable at this stage.
+gregkh-driver-sysfs-relay-channel-buffers-as-sysfs-attributes.patch +gregkh-driver-relay-consolidate-relayfs-core-into-kernel-relay.c.patch +gregkh-driver-sysfs-update-relay-file-support-for-generic-relay-api.patch +gregkh-driver-relayfs-remove-relayfs-in-favour-of-config_relay.patch +gregkh-driver-relay-relay-header-cleanup.patch +gregkh-driver-sysfs-add-__attr_relay-helper-for-relay-attributes.patch +gregkh-driver-sysfs-kzalloc-conversion.patch +gregkh-driver-firmware-fix-bug-in-fw_realloc_buffer.patch +gregkh-driver-spi-per-transfer-overrides-for-wordsize-and-clocking.patch
Driver tree updates
+add-cpia2-camera-support.patch
CPIA camera driver
+gregkh-i2c-w1-use-kthread-api.patch
i2c tree
+pc-speaker-add-snd_silent.patch
Bring back yet again the pc-speaker SND_SILENT patch. I can't get rid of the thing.
+remove-the-config_cc_align_-options.patch
kbuild cleanup
+drivers-scsi-libata-scsic-make-some-functions-static.patch
scsi cleanup
+tg3-netif_carrier_off-runs-too-early-could-still-be-queued-when-init-fails.patch
tg3 fix (nacked by maintainer)
+config_forcedeth-updates.patch
forcedeth driver fixes
+serial-serial_txx9-driver-update.patch
This got lost. Another patch I cannot get rid of. Should I send them daily?
+serial-kernel-console-should-send-crlf-not-lfcr.patch
serial driver \n\r -> \r\n fixes
+gregkh-pci-pci-avoid-leaving-master_abort-disabled-permanently-when-returning-from-pci_scan_bridge.patch +gregkh-pci-shpchp-remove-unused-pci_bus-member-from-controller-structure.patch +gregkh-pci-shpchp-remove-unused-wait_for_ctrl_irq.patch +gregkh-pci-shpchp-event-handling-rework.patch +gregkh-pci-shpchp-fix-slot-state-handling.patch +gregkh-pci-shpchp-adapt-to-pci-driver-model.patch +gregkh-pci-pci-add-pci_device_shutdown-to-pci_bus_type.patch +gregkh-pci-pci-smbus-unhide-on-hp-compaq-nx6110.patch +gregkh-pci-pci-pci-quirk-for-asus-a8v-and-a8v-deluxe-motherboards.patch +gregkh-pci-pci-make-msi-quirk-inheritable-from-the-pci-bus.patch +gregkh-pci-pci-msi-save-restore-for-suspend-resume.patch +gregkh-pci-pci-remove-msi-save-restore-code-in-specific-driver.patch +gregkh-pci-pci-resource-address-mismatch.patch +gregkh-pci-pci-fix-problems-with-msi-x-on-ia64.patch +gregkh-pci-pci-pci-cardbus-cards-hidden-needs-pci-assign-busses-to-fix.patch +gregkh-pci-pci-move-pci_dev_put-outside-a-spinlock.patch +gregkh-pci-acpiphp-add-new-bus-to-acpi.patch +gregkh-pci-acpi-export-acpi_bus_trim.patch +gregkh-pci-acpiphp-add-dock-event-handling.patch +gregkh-pci-acpi-remove-dock-event-handling-from-ibm_acpi.patch +gregkh-pci-acpiphp-slot-management-fix-v4.patch
PCI tree updates
+revert-gregkh-pci-x86-pci-domain-support-the-meat.patch +gregkh-pci-altix-msi-support-git-ia64-fix.patch
Fix up things in the PCI tree
+axnet_cs-support-amb8110.patch
New device support
+net-socket-timestamp-32-bit-handler-for-64-bit-kernel-fix.patch
Fix net-socket-timestamp-32-bit-handler-for-64-bit-kernel.patch
+git-sparc64-build-fix.patch
Fix git-sparc64.patch
+gregkh-usb-usb-unusual_devs-entry-for-lyra-rca-rd1080.patch +gregkh-usb-usb-lh7a40x-gadget-driver-fixed-a-dead-lock.patch +gregkh-usb-usb-gadget-rndis-fix-alloc-bug.patch +gregkh-usb-ub-use-kzalloc.patch +gregkh-usb-usb-gadget-driver-section-fixups.patch +gregkh-usb-usb-ethernet-gadget-driver-section-fixups.patch +gregkh-usb-usb-visor.c-id-for-gspda-smartphone.patch +gregkh-usb-usb-fix-warning-in-drivers-usb-media-ov511.c.patch +gregkh-usb-usb-zc0301-driver-updates.patch +gregkh-usb-usb-credits-add-credits-about-the-zc0301-and-et61x51-usb-drivers.patch
USB tree updates
+slab-remove-slab_no_reap-option.patch +slab-remove-slab_no_reap-option-fix.patch +on_each_cpu-disable-local-interupts.patch +slab-use-on_each_cpu.patch +slab-node-rotor-for-freeing-alien-caches-and-remote-per-cpu-pages.patch +slab-node-rotor-for-freeing-alien-caches-and-remote-per-cpu-pages-fix.patch
slab cleanups and NUMA tweak
+selinux-disable-automatic-labeling-of-new-inodes-when.patch +selinuxfs-cleanups-fix-hard-link-count.patch +selinuxfs-cleanups-use-sel_make_dir.patch +selinuxfs-cleanups-sel_fill_super-exit-path.patch +selinuxfs-cleanups-sel_make_bools.patch +selinuxfs-cleanups-sel_make_avc_files.patch
SELinux updates
+i386-dont-let-ptrace-set-the-nested-task-bit.patch +i386-let-signal-handlers-set-the-resume-flag.patch +x86-early-printk-handling-fixes.patch +register-the-boot-cpu-in-the-cpu-maps-earlier.patch +register-the-boot-cpu-in-the-cpu-maps-earlier-fix.patch +i386-pass-proper-trap-numbers-to-die-chain-handlers.patch +i386-actively-synchronize-vmalloc-area-when-registering-certain-callbacks.patch +i386-actively-synchronize-vmalloc-area-when-registering-certain-callbacks-tidy.patch +i386-fix-uses-of-user_mode-vs-user_mode_vm.patch +fix-elf-entry-point-i386.patch +i386-fix-singlestep-through-an-int80-syscall.patch
x86 updates
+swsusp-documentation-fix.patch
swsusp documentation
-pm-add-state-field-to-pm_message_t-to-hold-actual.patch -pm-respect-the-actual-device-power-states-in-sysfs.patch -pm-minor-updates-to-core-suspend-resume-functions.patch -pm-make-pci_choose_state-use-the-real-device.patch
Dropped due to bug.
+pm-print-name-of-failed-suspend-function.patch
PM debugging aid.
+remove-kernel-power-pmcpm_unregister.patch
Cleanup
-dasd-backout-dasd_eer-module.patch
The eer module got deleted.
-register-sysfs-device-for-lp-devices.patch
Buggy, dropped.
-timer-irq-driven-soft-watchdog-percpu-race-fix.patch -timer-irq-driven-soft-watchdog-percpu-fix.patch -timer-irq-driven-soft-watchdog-boot-fix.patch
Folded into timer-irq-driven-soft-watchdog-cleanups.patch
+softlockup-detection-vs-cpu-hotplug.patch +timer-irq-driven-soft-watchdog-cleanups-update.patch
Update it some more.
+decrapify-asm-generic-localh.patch
Use atomic64_t for default local_t implementation
+fs-inodec-make-iprune_mutex-static.patch
Cleanup
+reiserfs-fix-transaction-overflowing.patch
reiser3 fix
+introduce-fmode_exec-file-flag.patch
A hint for distributed filesystems.
+add-lookup_instantiate_filp-usage-warning.patch
Comment update
+isdn-fix-copy_to_user-unused-result-warning-in-isdn_ppp.patch
Warning fix
+time_interpolator-use-readq_relaxed-instead-of-readq.patch
Microoptimisation
+copy_process-cleanup-bad_fork_cleanup_sighand.patch +copy_process-cleanup-bad_fork_cleanup_signal.patch +cleanup-__exit_signal.patch +rename-__exit_sighand-to-cleanup_sighand.patch +move-__exit_signal-to-kernel-exitc.patch +revert-optimize-sys_times-for-a-single-thread-process.patch +do-__unhash_process-under-siglock.patch +sys_times-dont-take-tasklist_lock.patch +relax-sig_needs_tasklist.patch +do_signal_stop-dont-take-tasklist_lock.patch +do_group_exit-dont-take-tasklist_lock.patch +do_sigaction-dont-take-tasklist_lock.patch
More core process/pid/thread updates from Oleg.
+autofs4-add-new-packet-type-for-v5-communications-fix.patch
Fix autofs4-add-new-packet-type-for-v5-communications.patch
-time-reduced-ntp-rework-part-1-update.patch +time-reduced-ntp-rework-part-1-fix-adjtimeadj.patch +time-reduced-ntp-rework-part-2-fix-adjtimeadj.patch +time-clocksource-infrastructure-remove-nsec_t.patch +time-generic-timekeeping-infrastructure-remove-nsec_t.patch +time-generic-timekeeping-infrastructure-fix-ntp_synced.patch +time-generic-timekeeping-infrastructure-wall_offset-helper-cleanup.patch +time-i386-conversion-part-3-remove-nsec_t.patch +time-i386-conversion-part-3-backout-pmtmr-changes.patch -time-i386-conversion-part-5-acpi-pm-variable-renaming-and-config-change.patch -time-i386-conversion-part-5-acpi-pm-variable-renaming-and-config-change-x86_64-fix.patch +time-i386-conversion-part-4-del-timer_tscc.patch +time-i386-clocksource-drivers-backout-pmtmr-changes.patch
Various updates, fixes and cleanups for the time management patches in -mm.
+sched-smpnice-apply-review-suggestions.patch
Tweaks for sched-implement-smpnice.patch
+frv-remove-unnecessary-ampersand.patch +function-typo-fixes.patch +um-fix-undefined-reference-to-hweight32.patch +arm-fix-undefined-reference-to-generic_fls.patch +bitops-generic-test_and_setclearchange_bit-fix.patch +bitops-generic-hweight6432168-fix.patch +bitops-m68k-use-generic-bitops-fix.patch +bitops-ppc-use-generic-bitops.patch +remove-zone_mem_map.patch
Various updates related to the bitops consolidation code in -mm.
+ia64-add-ptr-to-compatpatch.patch
+s390-add-ptr-compatpatch.patch
+parisc-add-ptr-compatpatch.patch
+mips-add-ptr-compatpatch.patch
Various archtectures need ptr_to_compat() for the lightweight futex patch.
+lightweight-robust-futexes-docs-update.patch
+lightweight-robust-futexes-i386-fix.patch
+lightweight-robust-futexes-x86_64-fix.patch
Updates to the futex patches
+unify-pfn_to_page-sparc64-pfn_to_page-fix.patch
Fix unify-pfn_to_page-sparc64-pfn_to_page.patch
+notifier-chain-update-api-changes.patch +notifier-chain-update-api-changes-register-atomic_notifiers-in-atomic-context.patch +notifier-chain-update-api-changes-export-new-notifier-chain-routines-as-gpl.patch +notifier-chain-update-api-changes-avoid-calling-down_read-and-down_write-during-startup.patch +notifier-chain-update-simple-definition-changes.patch +notifier-chain-update-remove-unneeded-protection.patch +notifier-chain-update-remove-unneeded-protection-the-idle-notifier-chain-should-be-atomic.patch +notifier-chain-update-die_chain-changes.patch +notifier-chain-update-dont-unregister-yourself.patch +notifier-chain-update-dont-unregister-yourself-fix.patch +notifier-chain-update-changes-to-dcdbasc.patch +notifier-chain-update-update-usb_notify.patch +notifier-chain-update-remaining-changes-for-new-api.patch
Notifier chain rework.
+rtc-subsystem-class.patch
+rtc-subsystem-arm-cleanup.patch
+rtc-subsystem-i2c-cleanup.patch
+rtc-subsystem-sysfs-interface.patch
+rtc-subsystem-proc-interface.patch
+rtc-subsystem-dev-interface.patch
+rtc-subsystem-x1205-driver.patch
+rtc-subsystem-test-device-driver.patch
+rtc-subsystem-ds1672-driver.patch
+rtc-subsystem-pcf8563-driver.patch
+rtc-subsystem-rs5c372-driver.patch
rtc subsystem rework. These patches are being updated.
+fbdev-framebuffer-driver-for-geode-gx-warning-fix.patch
Fix warning in fbdev-framebuffer-driver-for-geode-gx-update.patch
+au1200fb-alchemy-au1200-framebuffer-driver.patch
New framebuffer driver
+fbdev-make-bios-edid-reading-configurable.patch
Fix boot-time stall due to EDID probing.
+acpi-identify-which-device-is-not-power-manageable.patch
More useful ACPI warning message
All 1149 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/patch-list
PATCH 1/1 mips: fixed collision of rtc function name
Hi,
This patch has fixed the collision of rtc function name on 2.6.16-rc4-mm2.
Yoichi
arch/mips/ddb5xxx/common/rtc_ds1386.c +2 -2
@@ -165,6 +165,6 @@ rtc_ds1386_init(unsigned long base)WRITE_RTC (0xB , byte);/* set the function pointers */ - rtc_get_time = rtc_ds1386_get_time; - rtc_set_time = rtc_ds1386_set_time; + rtc_mips_get_time = rtc_ds1386_get_time; + rtc_mips_set_time = rtc_ds1386_set_time; }
arch/mips/dec/time.c +2 -2
@@ -193,8 +193,8 @@ static void dec_ioasic_hpt_init(unsignedvoid __init dec_time_init (void ) { - rtc_get_time = dec_rtc_get_time; - rtc_set_mmss = dec_rtc_set_mmss; + rtc_mips_get_time = dec_rtc_get_time; + rtc_mips_set_mmss = dec_rtc_set_mmss; mips_timer_state = dec_timer_state; mips_timer_ack = dec_timer_ack;
arch/mips/ite-boards/generic/time.c +2 -2
@@ -227,8 +227,8 @@ void __init it8172_time_init(void)local_irq_restore (flags); - rtc_get_time = it8172_rtc_get_time; - rtc_set_time = it8172_rtc_set_time; + rtc_mips_get_time = it8172_rtc_get_time; + rtc_mips_set_time = it8172_rtc_set_time; }#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
arch/mips/jmr3927/common/rtc_ds1742.c +2 -2
@@ -159,8 +159,8 @@ rtc_ds1742_init(unsigned long base)db_assert ((rtc_base &0xe0000000 ) ==KSEG1 );/* set the function pointers */ - rtc_get_time = rtc_ds1742_get_time; - rtc_set_time = rtc_ds1742_set_time; + rtc_mips_get_time = rtc_ds1742_get_time; + rtc_mips_set_time = rtc_ds1742_set_time;/* clear oscillator stop bit */ CMOS_WRITE (RTC_READ ,RTC_CONTROL );
arch/mips/kernel/time.c +11 -11
@@ -65,9 +65,9 @@ static int null_rtc_set_time(unsigned loreturn 0 ; } -unsigned long (*rtc_get_time)(void ) = null_rtc_get_time; -int (*rtc_set_time)(unsigned long ) = null_rtc_set_time; -int (*rtc_set_mmss)(unsigned long ); +unsigned long (*rtc_mips_get_time)(void ) = null_rtc_get_time; +int (*rtc_mips_set_time)(unsigned long ) = null_rtc_set_time; +int (*rtc_mips_set_mmss)(unsigned long );/* usecs per counter cycle, shifted to left by 32 bits */
@@ -437,7 +437,7 @@ irqreturn_t timer_interrupt(int irq, voi/* * If we have an externally synchronized Linux clock, then update -* CMOS clock accordingly every ~11 minutes. rtc_set_time() has to be +* CMOS clock accordingly every ~11 minutes. rtc_mips_set_time() has to be * called as close as possible to 500 ms before the new second starts. */ write_seqlock (&xtime_lock);
@@ -445,7 +445,7 @@ irqreturn_t timer_interrupt(int irq, voi xtime.tv_sec > last_rtc_update +660 && (xtime.tv_nsec /1000 ) >=500000 - ((unsigned )TICK_SIZE ) /2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { - if (rtc_set_mmss(xtime.tv_sec) == 0) { + if (rtc_mips_set_mmss(xtime.tv_sec) == 0) { last_rtc_update = xtime.tv_sec; } else {/* do it again in 60 s */
@@ -562,7 +562,7 @@ asmlinkage void ll_local_timer_interrupt* b) (optional) calibrate and set the mips_hpt_frequency * (only needed if you intended to use fixed_rate_gettimeoffset * or use cpu counter as timer interrupt source) -* 2) setup xtime based on rtc_get_time(). +* 2) setup xtime based on rtc_mips_get_time(). * 3) choose a appropriate gettimeoffset routine. * 4) calculate a couple of cached variables for later usage * 5) board_timer_setup() -
@@ -630,10 +630,10 @@ void __init time_init(void)if (board_time_init)board_time_init (); -if (!rtc_set_mmss) - rtc_set_mmss = rtc_set_time; +if (!rtc_mips_set_mmss) + rtc_mips_set_mmss = rtc_mips_set_time; - xtime.tv_sec =rtc_get_time (); + xtime.tv_sec =rtc_mips_get_time (); xtime.tv_nsec =0 ; set_normalized_timespec(&wall_to_monotonic,
@@ -769,8 +769,8 @@ void to_tm(unsigned long tim, struct rtcEXPORT_SYMBOL (rtc_lock);EXPORT_SYMBOL (to_tm); -EXPORT_SYMBOL (rtc_set_time); -EXPORT_SYMBOL (rtc_get_time); +EXPORT_SYMBOL (rtc_mips_set_time); +EXPORT_SYMBOL (rtc_mips_get_time);unsigned long long sched_clock (void ) {
arch/mips/lasat/setup.c +2 -2
@@ -175,8 +175,8 @@ void __init plat_setup(void)#ifdef CONFIG_DS1603 ds1603 = &ds_defs[mips_machtype]; - rtc_get_time = ds1603_read; - rtc_set_time = ds1603_set; + rtc_mips_get_time = ds1603_read; + rtc_mips_set_time = ds1603_set;#endif #ifdef DYNAMIC_SERIAL_INIT
arch/mips/mips-boards/atlas/atlas_setup.c +1 -1
@@ -65,7 +65,7 @@ void __init plat_setup(void) board_time_init = mips_time_init; board_timer_setup = mips_timer_setup; - rtc_get_time = mips_rtc_get_time; + rtc_mips_get_time = mips_rtc_get_time; }static void __init serial_init (void )
arch/mips/mips-boards/malta/malta_setup.c +1 -1
@@ -225,5 +225,5 @@ void __init plat_setup(void) board_time_init = mips_time_init; board_timer_setup = mips_timer_setup; - rtc_get_time = mips_rtc_get_time; + rtc_mips_get_time = mips_rtc_get_time; }
arch/mips/momentum/jaguar_atx/setup.c +2 -2
@@ -228,8 +228,8 @@ void momenco_time_init(void) mips_hpt_frequency = cpu_clock /2 ; board_timer_setup = momenco_timer_setup; - rtc_get_time = m48t37y_get_time; - rtc_set_time = m48t37y_set_time; + rtc_mips_get_time = m48t37y_get_time; + rtc_mips_set_time = m48t37y_set_time; }static struct resource mv_pci_io_mem0_resource = {
arch/mips/momentum/ocelot_3/setup.c +2 -2
@@ -215,8 +215,8 @@ void momenco_time_init(void) mips_hpt_frequency = cpu_clock /2 ; board_timer_setup = momenco_timer_setup; - rtc_get_time = m48t37y_get_time; - rtc_set_time = m48t37y_set_time; + rtc_mips_get_time = m48t37y_get_time; + rtc_mips_set_time = m48t37y_set_time; }/*
arch/mips/momentum/ocelot_c/setup.c +2 -2
@@ -226,8 +226,8 @@ void momenco_time_init(void)printk ("momenco_time_init cpu_clock=%d\n" , cpu_clock); board_timer_setup = momenco_timer_setup; - rtc_get_time = m48t37y_get_time; - rtc_set_time = m48t37y_set_time; + rtc_mips_get_time = m48t37y_get_time; + rtc_mips_set_time = m48t37y_set_time; }void __init plat_setup (void )
arch/mips/pmc-sierra/yosemite/setup.c +2 -2
@@ -198,8 +198,8 @@ static void __init py_rtc_setup(void)if (!m48t37_base)printk (KERN_ERR "Mapping the RTC failed\n" ); - rtc_get_time = m48t37y_get_time; - rtc_set_time = m48t37y_set_time; + rtc_mips_get_time = m48t37y_get_time; + rtc_mips_set_time = m48t37y_set_time;write_seqlock (&xtime_lock); xtime.tv_sec =m48t37y_get_time ();
arch/mips/sgi-ip22/ip22-time.c +2 -2
@@ -212,8 +212,8 @@ static void indy_timer_setup(struct irqavoid __init ip22_time_init (void ) {/* setup hookup functions */ - rtc_get_time = indy_rtc_get_time; - rtc_set_time = indy_rtc_set_time; + rtc_mips_get_time = indy_rtc_get_time; + rtc_mips_set_time = indy_rtc_set_time; board_time_init = indy_time_init; board_timer_setup = indy_timer_setup;
arch/mips/sgi-ip32/ip32-setup.c +2 -2
@@ -91,8 +91,8 @@ void __init plat_setup(void) { board_be_init = ip32_be_init; - rtc_get_time = mc146818_get_cmos_time; - rtc_set_mmss = mc146818_set_rtc_mmss; + rtc_mips_get_time = mc146818_get_cmos_time; + rtc_mips_set_mmss = mc146818_set_rtc_mmss; board_time_init = ip32_time_init; board_timer_setup = ip32_timer_setup;
arch/mips/sibyte/swarm/setup.c +4 -4
@@ -114,14 +114,14 @@ void __init plat_setup(void)if (xicor_probe ()) {printk ("swarm setup: Xicor 1241 RTC detected.\n" ); - rtc_get_time = xicor_get_time; - rtc_set_time = xicor_set_time; + rtc_mips_get_time = xicor_get_time; + rtc_mips_set_time = xicor_set_time; }if (m41t81_probe ()) {printk ("swarm setup: M41T81 RTC detected.\n" ); - rtc_get_time = m41t81_get_time; - rtc_set_time = m41t81_set_time; + rtc_mips_get_time = m41t81_get_time; + rtc_mips_set_time = m41t81_set_time; } printk("This kernel optimized for "
arch/mips/sni/setup.c +2 -2
@@ -164,8 +164,8 @@ static struct pci_controller sni_controlstatic inline void sni_pcimt_time_init (void ) { - rtc_get_time = mc146818_get_cmos_time; - rtc_set_time = mc146818_set_rtc_mmss; + rtc_mips_get_time = mc146818_get_cmos_time; + rtc_mips_set_time = mc146818_set_rtc_mmss; }void __init plat_setup (void )
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +2 -2
@@ -1036,8 +1036,8 @@ toshiba_rbtx4927_time_init(void)#ifdef CONFIG_RTC_DS1742 - rtc_get_time = rtc_ds1742_get_time; - rtc_set_time = rtc_ds1742_set_time; + rtc_mips_get_time = rtc_ds1742_get_time; + rtc_mips_set_time = rtc_ds1742_set_time;TOSHIBA_RBTX4927_SETUP_DPRINTK (TOSHIBA_RBTX4927_SETUP_TIME_INIT ,":rtc_ds1742_init()-\n" );
arch/mips/tx4938/common/rtc_rx5c348.c +2 -2
@@ -197,6 +197,6 @@ rtc_rx5c348_init(int chipid) srtc_24h =1 ;/* set the function pointers */ - rtc_get_time = rtc_rx5c348_get_time; - rtc_set_time = rtc_rx5c348_set_time; + rtc_mips_get_time = rtc_rx5c348_get_time; + rtc_mips_set_time = rtc_rx5c348_set_time; }
include/asm-mips/time.h +6 -6
@@ -26,14 +26,14 @@ extern spinlock_t rtc_lock;/* * RTC ops. By default, they point to no-RTC functions. -* rtc_get_time - mktime(year, mon, day, hour, min, sec) in seconds. -* rtc_set_time - reverse the above translation and set time to RTC. -* rtc_set_mmss - similar to rtc_set_time, but only min and sec need +* rtc_mips_get_time - mktime(year, mon, day, hour, min, sec) in seconds. +* rtc_mips_set_time - reverse the above translation and set time to RTC. +* rtc_mips_set_mmss - similar to rtc_set_time, but only min and sec need * to be set. Used by RTC sync-up. */ -extern unsigned long (*rtc_get_time)(void ); -extern int (*rtc_set_time)(unsigned long ); -extern int (*rtc_set_mmss)(unsigned long ); +extern unsigned long (*rtc_mips_get_time)(void ); +extern int (*rtc_mips_set_time)(unsigned long ); +extern int (*rtc_mips_set_mmss)(unsigned long );/* * Timer interrupt functions.
Re: [-mm PATCH] mips: fixed collision of rtc function name
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Yoichi Yuasa
yoichi> This patch has fixed the collision of rtc function name on yoichi> 2.6.16-rc4-mm2.
You missed changes for include/asm-mips/rtc.h (an interface for genrtc driver) ? Or genrtc driver will be gone in the new RTC subsystem?
---
Atsushi Nemoto
Re: [-mm PATCH] mips: fixed collision of rtc function name
Quoted 7 lines · On Sat, 25 Feb 2006 22:48:15 +0900 (JST) Atsushi Nemoto <[email protected]>…
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Yoichi Yuasa
yoichi> This patch has fixed the collision of rtc function name on yoichi> 2.6.16-rc4-mm2.
You missed changes for
include/asm-mips/rtc.h(an interface for genrtc driver) ? Or genrtc driver will be gone in the new RTC subsystem?
The new RTC subsystem don't have genrtc driver.
I think we should move from genrtc driver to the new RTC subsystem.
Yoichi
Re: [-mm PATCH] mips: fixed collision of rtc function name
Quoted 8 lines · Yoichi Yuasa
Quoted 5 lines
yoichi> This patch has fixed the collision of rtc function name on yoichi> 2.6.16-rc4-mm2.
You missed changes for
include/asm-mips/rtc.h(an interface for genrtc driver) ? Or genrtc driver will be gone in the new RTC subsystem?The new RTC subsystem don't have genrtc driver.
I think we should move from genrtc driver to the new RTC subsystem.
Definately preferable. I took the RTC subsystem patches as the reason to do some more cleaning in the MIPS RTC code. It's all quite disgusting but untangeling it is something one can easily burn a day or more on ...
Ralf
Quoted 6 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/
- Sam's new section-mismatch warning code detects 358 errors in my alpha build, and a quick sampling indicates that they're real. Once this hits mainline things will get somewhat messy.
To put credits right I just ported the functionality of the two scripts developed by Keith Owens (reference_init.pl and reference_discarded.pl) to modpost so the check is run each time moduels are build. All errors introduced in the process are mine.
The scripts are kept for now so one can double check.
I had in mind to fix some of the easier ones but work is hindering it atm.
For now it gives a warning when a drivers uses module_parm_array() and uses __initdata for parameters. This is a false warning - at least if sysfs attribute is '0'. Hope to look into this later.
Sam
2.6.16-rc4-mm2: drivers/rtc/utils.c should become part of a generic implementation
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...
+rtc-subsystem-class.patch
...
rtc subsystem rework. These patches are being updated.
...
Always building drivers/rtc/utils.o even if no RTC support is enabled seems to be a workaround for an issue that should instead be fixed properly:
The code in e.g. fs/udf/udftime.c or drivers/scsi/ips.c has some overlaps with what you are adding (they are not doing exactly the same, but there are overlaps).
We should have one common set of defines/inlines/functions dealing with all these time conversion, leap year, length of months/years etc. issues instead of adding one more implementation in this area.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: 2.6.16-rc4-mm2: drivers/rtc/utils.c should become part of a generic implementation
Quoted 11 lines · On Sat, 25 Feb 2006 04:31:18 +0100 Adrian Bunk <[email protected]> wrote:
Always building
drivers/rtc/utils.oeven if no RTC support is enabled seems to be a workaround for an issue that should instead be fixed properly:The code in e.g.
fs/udf/udftime.cordrivers/scsi/ips.chas some overlaps with what you are adding (they are not doing exactly the same, but there are overlaps).We should have one common set of defines/inlines/functions dealing with all these time conversion, leap year, length of months/years etc. issues instead of adding one more implementation in this area.
I agree. My idea was to place those routines in utils.o and then modify callers, like udftime.c and ips.c to use them. What is currently in utils.c has been gathered from files that were known to me, lice rtctime.c in the arm arch and some rtc drivers. Once deployed, it will be easier to find and convert similar routines.y
Signature · 6 lines
Best regards, Alessandro Zummo, Tower Technologies - Turin, Italy http://www.towertech.it
Re: 2.6.16-rc4-mm2: drivers/rtc/utils.c should become part of a generic implementation
Quoted 15 lines · Alessandro Zummo
Quoted 11 lines · On Sat, 25 Feb 2006 04:31:18 +0100 Adrian Bunk <[email protected]> wrote:
Always building
drivers/rtc/utils.oeven if no RTC support is enabled seems to be a workaround for an issue that should instead be fixed properly:The code in e.g.
fs/udf/udftime.cordrivers/scsi/ips.chas some overlaps with what you are adding (they are not doing exactly the same, but there are overlaps).We should have one common set of defines/inlines/functions dealing with all these time conversion, leap year, length of months/years etc. issues instead of adding one more implementation in this area.
Quoted 5 lines
I agree. My idea was to place those routines in utils.o and then modify callers, like
udftime.candips.cto use them. What is currently inutils.chas been gathered from files that were known to me, licertctime.cin the arm arch and some rtc drivers. Once deployed, it will be easier to find and convert similar routines.y
Sounds good, but for generic functions, two adjustments are required:
- move the code to lib/
- remove rtc_ prefixes from the functions
Quoted 2 lines
Best regards,
Alessandro Zummo,
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: 2.6.16-rc4-mm2: drivers/rtc/utils.c should become part of a generic implementation
Quoted 4 lines · On Sat, 25 Feb 2006 14:10:25 +0100 Adrian Bunk <[email protected]> wrote:
Sounds good, but for generic functions, two adjustments are required:
- move the code tolib/
- removertc_prefixes from the functions
Moved. I'm not sure about renaming them..
the functions are:
rtc_month_daysrtc_time_to_tmrtc_valid_tmrtc_tm_to_time
I think they make more sense with the rtc prefix
Signature · 6 lines
Best regards, Alessandro Zummo, Tower Technologies - Turin, Italy http://www.towertech.it
Re: 2.6.16-rc4-mm2: drivers/rtc/utils.c should become part of a generic implementation
Quoted 10 lines · Alessandro Zummo
Quoted 4 lines · On Sat, 25 Feb 2006 14:10:25 +0100 Adrian Bunk <[email protected]> wrote:
Sounds good, but for generic functions, two adjustments are required:
- move the code tolib/
- removertc_prefixes from the functionsMoved. I'm not sure about renaming them..
Quoted 8 lines
the functions are:
rtc_month_daysrtc_time_to_tmrtc_valid_tmrtc_tm_to_timeI think they make more sense with the rtc prefix
None of these functions is in any way specicific to RTC drivers.
Quoted 2 lines
Best regards,
Alessandro Zummo,
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: 2.6.16-rc4-mm2: drivers/rtc/utils.c should become part of a generic implementation
Quoted 13 lines · Adrian Bunk
Quoted 12 lines · Alessandro Zummo
Quoted 4 lines · On Sat, 25 Feb 2006 14:10:25 +0100 Adrian Bunk <[email protected]> wrote:
Sounds good, but for generic functions, two adjustments are required:
- move the code tolib/
- removertc_prefixes from the functionsMoved. I'm not sure about renaming them..
the functions are:
Quoted 8 lines
Quoted 6 lines
rtc_month_daysrtc_time_to_tmrtc_valid_tmrtc_tm_to_timeI think they make more sense with the rtc prefix
None of these functions is in any way specicific to RTC drivers.
Doesn't having them take a struct rtc_time (which is different from struct tm) make them rather RTC specific?
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 Serial core
Re: 2.6.16-rc4-mm2: drivers/rtc/utils.c should become part of a generic implementation
Quoted 19 lines · Russell King
Quoted 18 lines · Adrian Bunk
Quoted 17 lines · Alessandro Zummo
Quoted 4 lines · On Sat, 25 Feb 2006 14:10:25 +0100 Adrian Bunk <[email protected]> wrote:
Sounds good, but for generic functions, two adjustments are required:
- move the code tolib/
- removertc_prefixes from the functionsMoved. I'm not sure about renaming them..
the functions are:
rtc_month_daysrtc_time_to_tmrtc_valid_tmrtc_tm_to_time
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
I think they make more sense with the rtc prefix
None of these functions is in any way specicific to RTC drivers.
Doesn't having them take a struct
rtc_time(which is different from struct tm) make them rather RTC specific?
You are right, it seems I was a bit blind...
But in this case, it seems we don't need to build them unconditionally no matter whether RTC support is enabled in the kernel.
Quoted 1 line
Russell King
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed2.6.16-rc4-mm2: drivers/isdn/hysdn/hysdn_net.c module_param() compile error
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...
+remove-module_parm.patch
...
Current 2.6.16 queue. Some of these are a bit questionable at this stage.
...
This causes the following compile error:
<-- snip -->
...
CC [M] drivers/isdn/hysdn/hysdn_net.odrivers/isdn/hysdn/hysdn_net.c:27: error: syntax error before 'int' drivers/isdn/hysdn/hysdn_net.c:27: error: syntax error before ',' token drivers/isdn/hysdn/hysdn_net.c:27: error: 'param_set_unsigned' undeclared here (not in a function) drivers/isdn/hysdn/hysdn_net.c:27: error: syntax error before 'int' drivers/isdn/hysdn/hysdn_net.c:27: error: 'param_get_unsigned' undeclared here (not in a function) make[3]: *** [drivers/isdn/hysdn/hysdn_net.o] Error 1
<-- snip -->
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: 2.6.16-rc4-mm2: drivers/isdn/hysdn/hysdn_net.c module_param() compile error
Quoted 10 lines · Adrian Bunk
Quoted 7 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...
+remove-module_parm.patch
...
Current 2.6.16 queue. Some of these are a bit questionable at this stage.
...This causes the following compile error:
Thanks Adrian!
The hysdn_net driver #defines uint to "unsigned int" in a header. Remove that: the typedefs in types.h have the same effect, without breaking "uint" module_param.
drivers/isdn/hysdn/hysdn_defs.h +0 -2
@@ -24,8 +24,6 @@/* storage type definitions */ /****************************/ #define uchar unsigned char -#define uint unsigned int -#define ulong unsigned long#define word unsigned short#include "ince1pc.h"
Signature · 1 line
ccontrol: http://ozlabs.org/~rusty/ccontrol
Re: 2.6.16-rc4-mm2: drivers/isdn/hysdn/hysdn_net.c module_param() compile error
In reply to Adrian BunkQuoted 14 lines · Adrian Bunk
Quoted 7 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...
+remove-module_parm.patch
...
Current 2.6.16 queue. Some of these are a bit questionable at this stage.
...This causes the following compile error:
<-- snip -->
Quoted 8 lines
...
CC [M]drivers/isdn/hysdn/hysdn_net.o
drivers/isdn/hysdn/hysdn_net.c:27: error: syntax error before 'int'drivers/isdn/hysdn/hysdn_net.c:27: error: syntax error before ',' tokendrivers/isdn/hysdn/hysdn_net.c:27: error: 'param_set_unsigned' undeclared here (not in a function)drivers/isdn/hysdn/hysdn_net.c:27: error: syntax error before 'int'drivers/isdn/hysdn/hysdn_net.c:27: error: 'param_get_unsigned' undeclared here (not in a function) make[3]: *** [drivers/isdn/hysdn/hysdn_net.o] Error 1
That's a bit nasty.
module_param(hynet_enable, uint, 0);
module_param() does funny things with macros, and relies upon things like `uint' having a special-to-moduleparam.h meaning.
But ISDN defines its own meaning for uint and trips up the moduleparam.h macros.
Bad Rusty should have chosen less generic-sounding identifiers.
Bad ISDN shouldn't have gone off and defined its own types, either.
Kasrten, this nukes the hysdn custom types. Is it acceptable?
drivers/isdn/hysdn/boardergo.c | 31 +++++------ drivers/isdn/hysdn/boardergo.h | 46 ++++++++-------- drivers/isdn/hysdn/hycapi.c | 2 drivers/isdn/hysdn/hysdn_boot.c | 28 +++++----- drivers/isdn/hysdn/hysdn_defs.h | 71 ++++++++++++-------------- drivers/isdn/hysdn/hysdn_init.c | 4 - drivers/isdn/hysdn/hysdn_net.c | 6 +- drivers/isdn/hysdn/hysdn_pof.h | 12 ++-- drivers/isdn/hysdn/hysdn_procconf.c | 14 ++--- drivers/isdn/hysdn/hysdn_proclog.c | 10 +-- drivers/isdn/hysdn/hysdn_sched.c | 11 ++-- drivers/isdn/hysdn/ince1pc.h | 18 +++--- 12 files changed, 127 insertions(+), 126 deletions(-)
drivers/isdn/hysdn/hysdn_defs.h renamed from drivers/isdn/hysdn/hysdn_defs.h~hysdn-remove-custom-types +34 -37
@@ -20,14 +20,6 @@#include <linux/workqueue.h> #include <linux/skbuff.h> -/****************************/ -/* storage type definitions */ -/****************************/ -#define uchar unsigned char -#define uint unsigned int -#define ulong unsigned long -#define word unsigned short -#include "ince1pc.h" #ifdef CONFIG_HYSDN_CAPI
@@ -147,18 +139,18 @@ typedef struct HYSDN_CARD {/* general variables for the cards */ int myid;/* own driver card id */ -uchar bus;/* pci bus the card is connected to */ -uchar devfn;/* slot+function bit encoded */ -word subsysid;/* PCI subsystem id */ -uchar brdtype;/* type of card */ -uint bchans;/* number of available B-channels */ -uint faxchans;/* number of available fax-channels */ -uchar mac_addr[6 ];/* MAC Address read from card */ -uint irq;/* interrupt number */ -uint iobase;/* IO-port base address */ -ulong plxbase;/* PLX memory base */ -ulong membase;/* DPRAM memory base */ -ulong memend;/* DPRAM memory end */ +unsigned char bus;/* pci bus the card is connected to */ +unsigned char devfn;/* slot+function bit encoded */ +unsigned short subsysid;/* PCI subsystem id */ +unsigned char brdtype;/* type of card */ +unsigned int bchans;/* number of available B-channels */ +unsigned int faxchans;/* number of available fax-channels */ +unsigned char mac_addr[6 ];/* MAC Address read from card */ +unsigned int irq;/* interrupt number */ +unsigned int iobase;/* IO-port base address */ +unsigned long plxbase;/* PLX memory base */ +unsigned long membase;/* DPRAM memory base */ +unsigned long memend;/* DPRAM memory end */ void *dpram;/* mapped dpram */ int state;/* actual state of card -> CARD_STATE_** */ struct HYSDN_CARD *next;/* pointer to next card */
@@ -168,26 +160,26 @@ typedef struct HYSDN_CARD {void *procconf;/* pointer to procconf filesystem specific data */ /* debugging and logging */ -uchar err_log_state;/* actual error log state of the card */ -ulong debug_flags;/* tells what should be debugged and where */ +unsigned char err_log_state;/* actual error log state of the card */ +unsigned long debug_flags;/* tells what should be debugged and where */ void (*set_errlog_state) (struct HYSDN_CARD *,int );/* interrupt handler + interrupt synchronisation */ struct work_struct irq_queue;/* interrupt task queue */ -uchar volatile irq_enabled;/* interrupt enabled if != 0 */ -uchar volatile hw_lock;/* hardware is currently locked -> no access */ +unsigned char volatile irq_enabled;/* interrupt enabled if != 0 */ +unsigned char volatile hw_lock;/* hardware is currently locked -> no access */ /* boot process */ void *boot;/* pointer to boot private data */ -int (*writebootimg) (struct HYSDN_CARD *,uchar *,ulong ); -int (*writebootseq) (struct HYSDN_CARD *,uchar *,int ); +int (*writebootimg) (struct HYSDN_CARD *,unsigned char *,unsigned long ); +int (*writebootseq) (struct HYSDN_CARD *,unsigned char *,int );int (*waitpofready) (struct HYSDN_CARD *);int (*testram) (struct HYSDN_CARD *);/* scheduler for data transfer (only async parts) */ -uchar async_data[256 ];/* async data to be sent (normally for config) */ -word volatile async_len;/* length of data to sent */ -word volatile async_channel;/* channel number for async transfer */ +unsigned char async_data[256 ];/* async data to be sent (normally for config) */ +unsigned short volatile async_len;/* length of data to sent */ +unsigned short volatile async_channel;/* channel number for async transfer */ int volatile async_busy;/* flag != 0 sending in progress */ int volatile net_tx_busy;/* a network packet tx is in progress */
@@ -251,15 +243,18 @@ extern int ergo_inithardware(hysdn_card/* hysdn_boot.c */ extern int pof_write_close (hysdn_card *);/* close proc file after writing pof */ -extern int pof_write_open (hysdn_card *,uchar **);/* open proc file for writing pof */ +extern int pof_write_open (hysdn_card *,unsigned char **);/* open proc file for writing pof */ extern int pof_write_buffer (hysdn_card *,int );/* write boot data to card */ -extern int EvalSysrTokData (hysdn_card *,uchar *,int );/* Check Sysready Token Data */ +extern int EvalSysrTokData (hysdn_card *,unsigned char *,int );/* Check Sysready Token Data */ /* hysdn_sched.c */ -extern int hysdn_sched_tx (hysdn_card *,uchar *,word volatile *,word volatile *, -word ); -extern int hysdn_sched_rx (hysdn_card *,uchar *,word ,word ); -extern int hysdn_tx_cfgline (hysdn_card *,uchar *,word );/* send one cfg line */ +extern int hysdn_sched_tx (hysdn_card *,unsigned char *, +unsigned short volatile *,unsigned short volatile *, +unsigned short ); +extern int hysdn_sched_rx (hysdn_card *,unsigned char *,unsigned short , +unsigned short ); +extern int hysdn_tx_cfgline (hysdn_card *,unsigned char *, +unsigned short );/* send one cfg line */ /* hysdn_net.c */ extern unsigned int hynet_enable;
@@ -269,14 +264,16 @@ extern int hysdn_net_release(hysdn_cardextern char *hysdn_net_getname (hysdn_card *);/* get name of net interface */ extern void hysdn_tx_netack (hysdn_card *);/* acknowledge a packet tx */ extern struct sk_buff *hysdn_tx_netget (hysdn_card *);/* get next network packet */ -extern void hysdn_rx_netpkt (hysdn_card *,uchar *,word );/* rxed packet from network */ +extern void hysdn_rx_netpkt (hysdn_card *,unsigned char *, +unsigned short );/* rxed packet from network */ #ifdef CONFIG_HYSDN_CAPI extern unsigned int hycapi_enable;extern int hycapi_capi_create (hysdn_card *);/* create a new capi device */ extern int hycapi_capi_release (hysdn_card *);/* delete the device */ extern int hycapi_capi_stop (hysdn_card *card);/* suspend */ -extern void hycapi_rx_capipkt (hysdn_card * card,uchar * buf,word len); +extern void hycapi_rx_capipkt (hysdn_card * card,unsigned char * buf, +unsigned short len);extern void hycapi_tx_capiack (hysdn_card * card);extern struct sk_buff *hycapi_tx_capiget (hysdn_card *card);extern int hycapi_init (void );
drivers/isdn/hysdn/ince1pc.h renamed from drivers/isdn/hysdn/ince1pc.h~hysdn-remove-custom-types +9 -9
@@ -62,7 +62,7 @@* s. RotlCRC algorithm * * RotlCRC algorithm: -* ucSum= 0 1 uchar +* ucSum= 0 1 unsigned char * for all NonEndTokenChunk bytes: * ROTL(ucSum,1) rotate left by 1 * ucSum += Char; add current byte with swap around
@@ -85,13 +85,13 @@ typedef struct ErrLogEntry_tag { -/*00 */ ulong ulErrType; +/*00 */ unsigned long ulErrType; -/*04 */ ulong ulErrSubtype; +/*04 */ unsigned long ulErrSubtype; -/*08 */ uchar ucTextSize; +/*08 */ unsigned char ucTextSize; - /*09 */ uchar ucText[ERRLOG_TEXT_SIZE]; + /*09 */ unsigned char ucText[ERRLOG_TEXT_SIZE]; /* ASCIIZ of len ucTextSize-1 */ /*40 */
@@ -111,13 +111,13 @@ typedef struct ErrLogEntry_tag {#define DPRAM_SPOOLER_DATA_SIZE 0x20typedef struct DpramBootSpooler_tag { -/*00 */ uchar Len; +/*00 */ unsigned char Len; -/*01 */ volatile uchar RdPtr; +/*01 */ volatile unsigned char RdPtr; -/*02 */ uchar WrPtr; +/*02 */ unsigned char WrPtr; -/*03 */ uchar Data[DPRAM_SPOOLER_DATA_SIZE ]; +/*03 */ unsigned char Data[DPRAM_SPOOLER_DATA_SIZE ];/*23 */ }tDpramBootSpooler ;
drivers/isdn/hysdn/hysdn_net.c renamed from drivers/isdn/hysdn/hysdn_net.c~hysdn-remove-custom-types +3 -3
@@ -83,12 +83,12 @@ net_open(struct net_device *dev)/* Fill in the MAC-level header (if not already set) */ if (!card->mac_addr[0 ]) { -for (i =0 ; i <ETH_ALEN -sizeof (ulong); i++) +for (i =0 ; i <ETH_ALEN -sizeof (unsigned long ); i++) dev->dev_addr[i] =0xfc ;if ((in_dev = dev->ip_ptr) !=NULL ) {struct in_ifaddr *ifa = in_dev->ifa_list;if (ifa !=NULL ) -memcpy (dev->dev_addr + (ETH_ALEN -sizeof (ulong)), &ifa->ifa_local,sizeof (ulong)); +memcpy (dev->dev_addr + (ETH_ALEN -sizeof (unsigned long )), &ifa->ifa_local,sizeof (unsigned long )); } }else memcpy (dev->dev_addr, card->mac_addr,ETH_ALEN );
@@ -197,7 +197,7 @@ hysdn_tx_netack(hysdn_card * card)/* we got a packet from the network, go and queue it */ /*****************************************************/ void -hysdn_rx_netpkt (hysdn_card * card,uchar * buf,word len) +hysdn_rx_netpkt (hysdn_card * card,unsigned char *buf,unsigned short len) {struct net_local *lp = card->netif;struct sk_buff *skb;
drivers/isdn/hysdn/boardergo.c renamed from drivers/isdn/hysdn/boardergo.c~hysdn-remove-custom-types +16 -15
@@ -38,8 +38,8 @@ ergo_interrupt(int intno, void *dev_id, {hysdn_card *card = dev_id;/* parameter from irq */ tErgDpram *dpr; -ulong flags; -uchar volatile b; +unsigned long flags; +unsigned char volatile b;if (!card)return IRQ_NONE ;/* error -> spurious interrupt */
@@ -77,7 +77,7 @@ ergo_irq_bh(hysdn_card * card) {tErgDpram *dpr;int again; -ulong flags; +unsigned long flags;if (card->state !=CARD_STATE_RUN )return ;/* invalid call */
@@ -131,8 +131,8 @@ ergo_irq_bh(hysdn_card * card)static void ergo_stopcard (hysdn_card * card) { -ulong flags; -uchar val; +unsigned long flags; +unsigned char val;hysdn_net_release (card);/* first release the net device if existing */ #ifdef CONFIG_HYSDN_CAPI
@@ -157,7 +157,7 @@ ergo_stopcard(hysdn_card * card)static void ergo_set_errlog_state (hysdn_card * card,int on) { -ulong flags; +unsigned long flags;if (card->state !=CARD_STATE_RUN ) { card->err_log_state =ERRLOG_STATE_OFF ;/* must be off */
@@ -217,9 +217,10 @@ ergo_testram(hysdn_card * card)/* Negative return values are interpreted as errors. */ /*****************************************************************************/ static int -ergo_writebootimg (struct HYSDN_CARD *card,uchar * buf,ulong offs) +ergo_writebootimg (struct HYSDN_CARD *card,unsigned char *buf, +unsigned long offs) { -uchar *dst; +unsigned char *dst;tErgDpram *dpram;int cnt = (BOOT_IMG_SIZE >>2 );/* number of words to move and swap (byte order!) */
@@ -264,14 +265,14 @@ ergo_writebootimg(struct HYSDN_CARD *car/* case of errors a negative error value is returned. */ /********************************************************************************/ static int -ergo_writebootseq (struct HYSDN_CARD *card,uchar * buf,int len) +ergo_writebootseq (struct HYSDN_CARD *card,unsigned char *buf,int len) {tDpramBootSpooler *sp = (tDpramBootSpooler *) card->dpram; -uchar *dst; -uchar buflen; +unsigned char *dst; +unsigned char buflen;int nr_write; -uchar tmp_rdptr; -uchar wr_mirror; +unsigned char tmp_rdptr; +unsigned char wr_mirror;int i;if (card->debug_flags &LOG_POF_CARD )
@@ -330,7 +331,7 @@ ergo_waitpofready(struct HYSDN_CARD *car {tErgDpram *dpr = card->dpram;/* pointer to DPRAM structure */ int timecnt =10000 /50 ;/* timeout is 10 secs max. */ -ulong flags; +unsigned long flags;int msg_size;int i;
@@ -345,7 +346,7 @@ ergo_waitpofready(struct HYSDN_CARD *carif ((dpr->ToPcChannel !=CHAN_SYSTEM ) || (dpr->ToPcSize <MIN_RDY_MSG_SIZE ) || (dpr->ToPcSize >MAX_RDY_MSG_SIZE ) || - ((*(ulong *) dpr->ToPcBuf) !=RDY_MAGIC )) + ((*(unsigned long *) dpr->ToPcBuf) !=RDY_MAGIC ))break ;/* an error occurred */ /* Check for additional data delivered during SysReady */
drivers/isdn/hysdn/hycapi.c renamed from drivers/isdn/hysdn/hycapi.c~hysdn-remove-custom-types +1 -1
@@ -523,7 +523,7 @@ New nccis are created if necessary.*******************************************************************/ void -hycapi_rx_capipkt (hysdn_card * card,uchar * buf,word len) +hycapi_rx_capipkt (hysdn_card * card,unsigned char *buf,unsigned short len) {struct sk_buff *skb;hycapictrl_info *cinfo = card->hyctrlinfo;
drivers/isdn/hysdn/hysdn_boot.c renamed from drivers/isdn/hysdn/hysdn_boot.c~hysdn-remove-custom-types +14 -14
@@ -30,17 +30,17 @@/* needed during boot and so allocated dynamically. */ /************************************************************/ struct boot_data { -word Cryptor;/* for use with Decrypt function */ -word Nrecs;/* records remaining in file */ -uchar pof_state;/* actual state of read handler */ -uchar is_crypted;/* card data is crypted */ +unsigned short Cryptor;/* for use with Decrypt function */ +unsigned short Nrecs;/* records remaining in file */ +unsigned char pof_state;/* actual state of read handler */ +unsigned char is_crypted;/* card data is crypted */ int BufSize;/* actual number of bytes bufferd */ int last_error;/* last occurred error */ -word pof_recid;/* actual pof recid */ -ulong pof_reclen;/* total length of pof record data */ -ulong pof_recoffset;/* actual offset inside pof record */ +unsigned short pof_recid;/* actual pof recid */ +unsigned long pof_reclen;/* total length of pof record data */ +unsigned long pof_recoffset;/* actual offset inside pof record */ union { -uchar BootBuf[BOOT_BUF_SIZE ];/* buffer as byte count */ +unsigned char BootBuf[BOOT_BUF_SIZE ];/* buffer as byte count */ tPofRecHdr PofRecHdr;/* header for actual record/chunk */ tPofFileHdr PofFileHdr;/* header from POF file */ tPofTimeStamp PofTime;/* time information */
@@ -69,11 +69,11 @@ StartDecryption(struct boot_data *boot)static void DecryptBuf (struct boot_data *boot,int cnt) { -uchar *bufp = boot->buf.BootBuf; +unsigned char *bufp = boot->buf.BootBuf;while (cnt--) { boot->Cryptor = (boot->Cryptor >>1 ) ^ ((boot->Cryptor &1U ) ?CRYPT_FEEDTERM :0 ); - *bufp++ ^= (uchar ) boot->Cryptor; + *bufp++ ^= (unsigned char )boot->Cryptor; } }/* DecryptBuf */
@@ -86,7 +86,7 @@ pof_handle_data(hysdn_card * card, int d {struct boot_data *boot = card->boot;/* pointer to boot specific data */ long l; -uchar *imgp; +unsigned char *imgp;int img_len;/* handle the different record types */
@@ -197,7 +197,7 @@ pof_write_buffer(hysdn_card * card, intbreak ; }/* Setup the new state and vars */ - boot->Nrecs = (word) (boot->buf.PofFileHdr.N_PofRecs);/* limited to 65535 */ + boot->Nrecs = (unsigned short )(boot->buf.PofFileHdr.N_PofRecs);/* limited to 65535 */ boot->pof_state =POF_READ_TAG_HEAD ;/* now start with single tags */ boot->last_error =sizeof (tPofRecHdr);/* new length */ break ;
@@ -268,7 +268,7 @@ pof_write_buffer(hysdn_card * card, int/* occurred. Additionally the pointer to the buffer data area is set on success */ /*******************************************************************************/ int -pof_write_open (hysdn_card * card,uchar ** bufp) +pof_write_open (hysdn_card * card,unsigned char **bufp) {struct boot_data *boot;/* pointer to boot specific data */
@@ -335,7 +335,7 @@ pof_write_close(hysdn_card * card)/* when POF has been booted. A return value of 0 is used if no error occurred. */ /*********************************************************************************/ int -EvalSysrTokData (hysdn_card * card,uchar * cp,int len) +EvalSysrTokData (hysdn_card *card,unsigned char *cp,int len) {u_char *p;u_char crc;
drivers/isdn/hysdn/hysdn_init.c renamed from drivers/isdn/hysdn/hysdn_init.c~hysdn-remove-custom-types +2 -2
@@ -41,8 +41,8 @@ hysdn_card *card_root = NULL; /* pointer/* the last entry contains all 0 */ /**********************************************/ static struct { -word subid;/* PCI sub id */ -uchar cardtyp;/* card type assigned */ +unsigned short subid;/* PCI sub id */ +unsigned char cardtyp;/* card type assigned */ } pci_subid_map[] = { {
drivers/isdn/hysdn/hysdn_procconf.c renamed from drivers/isdn/hysdn/hysdn_procconf.c~hysdn-remove-custom-types +7 -7
@@ -36,9 +36,9 @@ struct conf_writedata {int buf_size;/* actual number of bytes in the buffer */ int needed_size;/* needed size when reading pof */ int state;/* actual interface states from above constants */ -uchar conf_line[CONF_LINE_LEN ];/* buffered conf line */ -word channel;/* active channel number */ -uchar *pof_buffer;/* buffer when writing pof */ +unsigned char conf_line[CONF_LINE_LEN ];/* buffered conf line */ +unsigned short channel;/* active channel number */ +unsigned char *pof_buffer;/* buffer when writing pof */ };/***********************************************************************/
@@ -49,7 +49,7 @@ struct conf_writedata {static int process_line (struct conf_writedata *cnf) { -uchar *cp = cnf->conf_line; +unsigned char *cp = cnf->conf_line;int i;if (cnf->card->debug_flags &LOG_CNF_LINE )
@@ -92,7 +92,7 @@ hysdn_conf_write(struct file *file, cons {struct conf_writedata *cnf;int i; -uchar ch, *cp; +unsigned char ch, *cp;if (!count)return (0 );/* nothing to handle */
@@ -390,7 +390,7 @@ inthysdn_procconf_init (void) {hysdn_card *card; -uchar conf_name[20 ]; +unsigned char conf_name[20 ]; hysdn_proc_entry =proc_mkdir (PROC_SUBDIR_NAME , proc_net);if (!hysdn_proc_entry) {
@@ -423,7 +423,7 @@ voidhysdn_procconf_release (void) {hysdn_card *card; -uchar conf_name[20 ]; +unsigned char conf_name[20 ]; card = card_root;/* start with first card */ while (card) {
drivers/isdn/hysdn/hysdn_proclog.c renamed from drivers/isdn/hysdn/hysdn_proclog.c~hysdn-remove-custom-types +5 -5
@@ -28,7 +28,7 @@ static void put_log_buffer(hysdn_card */*************************************************/ struct log_data {struct log_data *next; -ulong usage_cnt;/* number of files still to work */ +unsigned long usage_cnt;/* number of files still to work */ void *proc_ctrl;/* pointer to own control procdata structure */ char log_start[2 ];/* log string start (final len aligned by size) */ };
@@ -42,7 +42,7 @@ struct procdata {struct log_data *log_head, *log_tail;/* head and tail for queue */ int if_used;/* open count for interface */ int volatile del_lock;/* lock for delete operations */ -uchar logtmp[LOG_MAX_LINELEN ]; +unsigned char logtmp[LOG_MAX_LINELEN ];wait_queue_head_t rd_queue; };
@@ -153,9 +153,9 @@ put_log_buffer(hysdn_card * card, char *static ssize_t hysdn_log_write (struct file *file,const char __user *buf,size_t count,loff_t * off) { -ulong u =0 ; +unsigned long u =0 ;int found =0 ; -uchar *cp, valbuf[128 ]; +unsigned char *cp, valbuf[128 ];long base =10 ;hysdn_card *card = (hysdn_card *) file->private_data;
@@ -249,7 +249,7 @@ hysdn_log_open(struct inode *ino, struct {hysdn_card *card;struct procdata *pd =NULL ; -ulong flags; +unsigned long flags;lock_kernel (); card = card_root;
drivers/isdn/hysdn/hysdn_sched.c renamed from drivers/isdn/hysdn/hysdn_sched.c~hysdn-remove-custom-types +7 -4
@@ -30,7 +30,8 @@/* to keep the data until later. */ /*****************************************************************************/ int -hysdn_sched_rx (hysdn_card * card,uchar * buf,word len,word chan) +hysdn_sched_rx (hysdn_card *card,unsigned char *buf,unsigned short len, +unsigned short chan) {switch (chan) {
@@ -72,7 +73,9 @@ hysdn_sched_rx(hysdn_card * card, uchar/* sending. */ /*****************************************************************************/ int -hysdn_sched_tx (hysdn_card * card,uchar * buf,word volatile *len,word volatile *chan,word maxlen) +hysdn_sched_tx (hysdn_card *card,unsigned char *buf, +unsigned short volatile *len,unsigned short volatile *chan, +unsigned short maxlen) {struct sk_buff *skb;
@@ -145,10 +148,10 @@ hysdn_sched_tx(hysdn_card * card, uchar/* are to be sent and this happens very seldom. */ /*****************************************************************************/ int -hysdn_tx_cfgline (hysdn_card * card,uchar * line,word chan) +hysdn_tx_cfgline (hysdn_card *card,unsigned char *line,unsigned short chan) {int cnt =50 ;/* timeout intervalls */ -ulong flags; +unsigned long flags;if (card->debug_flags &LOG_SCHED_ASYN )hysdn_addlog (card,"async tx-cfg chan=%d len=%d" , chan,strlen (line) +1 );
drivers/isdn/hysdn/boardergo.h renamed from drivers/isdn/hysdn/boardergo.h~hysdn-remove-custom-types +23 -23
75 lines not on this page · raw message
drivers/isdn/hysdn/hysdn_pof.h renamed from drivers/isdn/hysdn/hysdn_pof.h~hysdn-remove-custom-types +6 -6
@@ -47,20 +47,20 @@/*--------------------------------------POF file record structs------------*/ typedef struct PofFileHdr_tag {/* Pof file header */ -/*00 */ ulong Magic __attribute__((packed)); -/*04 */ ulong N_PofRecs __attribute__((packed)); +/*00 */ unsigned long Magic __attribute__((packed)); +/*04 */ unsigned long N_PofRecs __attribute__((packed));/*08 */ }tPofFileHdr ;typedef struct PofRecHdr_tag {/* Pof record header */ -/*00 */ word PofRecId __attribute__((packed)); -/*02 */ ulong PofRecDataLen __attribute__((packed)); +/*00 */ unsigned short PofRecId __attribute__((packed)); +/*02 */ unsigned long PofRecDataLen __attribute__((packed));/*06 */ }tPofRecHdr ;typedef struct PofTimeStamp_tag { -/*00 */ ulong UnixTime __attribute__((packed)); -/*04 */ uchar DateTimeText[0x28 ] __attribute__((packed)); +/*00 */ unsigned long UnixTime __attribute__((packed)); +/*04 */ unsigned char DateTimeText[0x28 ] __attribute__((packed));/* =40 */ /*2C */ }tPofTimeStamp ;
_
Re: 2.6.16-rc4-mm2: drivers/isdn/hysdn/hysdn_net.c module_param() compile error
Quoted 1 line · Andrew Morton
Bad Rusty should have chosen less generic-sounding identifiers.
I actually disagree with that, for three reasons. Firstly, my namespace didn't leak: I only appended these names to clear prefixes. Secondly, uint is already typedefed in types.h. Thirdly, the short names are clear and intuitive.
Quoted 1 line
Bad ISDN shouldn't have gone off and defined its own types, either.
That was poor, yes, but typedefs would have been less polluting than #defines.
Hope that clarifies!
Rusty.
Signature · 1 line
ccontrol: http://ozlabs.org/~rusty/ccontrol
oss/sonicvibes.c defines its own hweight32
In reply to Andrew MortonHi Andrew and all
Just tried to compile the kernel with the 'allyesconfig' when I stumbled on this one (have not seen any reports on this one, otherwise sorry for the blotter):
CHK usr/initramfs_list
CC sound/oss/sonicvibes.osound/oss/sonicvibes.c:421: error: static declaration of ‘hweight32’ follows non-static declaration include/asm-generic/bitops/hweight.h:6: error: previous declaration of ‘hweight32’ was here make[2]: *** [sound/oss/sonicvibes.o] Error 1
make[1]: *** [sound/oss] Error 2
make: *** [sound] Error 2
I am not sure why it tries to make its own hweight32() so I just disabled it:
sound/oss/sonicvibes.c +0 -0
@@ -408,6 +408,7 @@ static inline unsigned ld2(unsigned int
return r; }
+#if 0
/*
* hweightN: returns the hamming weight (i.e. the number
* of bits set) of a N-bit word
@@ -425,6 +426,7 @@ static inline unsigned int hweight32(uns
res = (res & 0x00FF00FF) + ((res >> 8) & 0x00FF00FF);
return (res & 0x0000FFFF) + ((res >> 16) & 0x0000FFFF);
}+#endif
/* --------------------------------------------------------------------- */
BTW, I do not have the hardware, so it is just building-tested.
Best
Richard Knutsson
2.6.16-rc4-mm2: useless acpi_pmtmr_buggy
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...
+time-i386-clocksource-drivers-backout-pmtmr-changes.patchVarious updates, fixes and cleanups for the time management patches in -mm.
...
Both before and after this patch, acpi_pmtmr_buggy is useless since it never gets any value assigned.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedQuoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/
Geode video breaks the build :
LD init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o(.text+0x133f6): In function `gxfb_set_par':
: undefined reference to fb_dealloc_cmap' drivers/built-in.o(.text+0x13432): In function gxfb_set_par':
: undefined reference to fb_alloc_cmap' drivers/built-in.o(.text+0x1359e): In function gxfb_remove':
: undefined reference to unregister_framebuffer' drivers/built-in.o(.text+0x135f5): In function gxfb_remove':
: undefined reference to framebuffer_release' drivers/built-in.o(.init.text+0x168e): In function gxfb_init_fbinfo':
: undefined reference to framebuffer_alloc' drivers/built-in.o(.init.text+0x17b8): In function gxfb_probe':
: undefined reference to fb_find_mode' drivers/built-in.o(.init.text+0x180f): In function gxfb_probe':
: undefined reference to register_framebuffer' drivers/built-in.o(.init.text+0x189e): In function gxfb_probe':
: undefined reference to framebuffer_release' drivers/built-in.o(.init.text+0x192b): In function gxfb_init':
: undefined reference to `fb_get_options'
make: *** [.tmp_vmlinux1] Error 1
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
Quoted 6 lines · Jesper Juhl
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/
Quoted 8 lines
Geode video breaks the build :
LD
init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o(.text+0x133f6): In function `gxfb_set_par':
: undefined reference tofb_dealloc_cmap' drivers/built-in.o(.text+0x13432): In functiongxfb_set_par':
: undefined reference to `fb_alloc_cmap'
How'd you manage that? Those things are dragged in via CONFIG_FB.
Quoted 9 lines · Andrew Morton
Quoted 8 lines · Jesper Juhl
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/
Geode video breaks the build :
Quoted 9 lines
Quoted 6 lines
LD
init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o(.text+0x133f6): In function `gxfb_set_par':
: undefined reference tofb_dealloc_cmap' drivers/built-in.o(.text+0x13432): In functiongxfb_set_par':
: undefined reference to `fb_alloc_cmap'How'd you manage that? Those things are dragged in via
CONFIG_FB.
with "make randconfig" - the config it generated for me (and which broke) is attached.
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
Quoted 18 lines · Jesper Juhl
Quoted 16 lines · Andrew Morton
Quoted 14 lines · Jesper Juhl
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/
Geode video breaks the build :
LD
init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o(.text+0x133f6): In function `gxfb_set_par':
: undefined reference tofb_dealloc_cmap' drivers/built-in.o(.text+0x13432): In functiongxfb_set_par':
: undefined reference to `fb_alloc_cmap'
Quoted 4 lines
Quoted 2 lines
How'd you manage that? Those things are dragged in via
CONFIG_FB.with "make randconfig" - the config it generated for me (and which broke) is attached.
CONFIG_FB=m, CONFIG_FB_GEODE_GX=y. An easy mistake, that.
Quoted 19 lines · Andrew Morton
Quoted 18 lines · Jesper Juhl
Quoted 16 lines · Andrew Morton
Quoted 14 lines · Jesper Juhl
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/
Geode video breaks the build :
LD
init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o(.text+0x133f6): In function `gxfb_set_par':
: undefined reference tofb_dealloc_cmap' drivers/built-in.o(.text+0x13432): In functiongxfb_set_par':
: undefined reference to `fb_alloc_cmap'
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
How'd you manage that? Those things are dragged in via
CONFIG_FB.with "make randconfig" - the config it generated for me (and which broke) is attached.
CONFIG_FB=m,CONFIG_FB_GEODE_GX=y. An easy mistake, that.
Does it even make sense to build CONFIG_FB modular?
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
Quoted 22 lines · Jesper Juhl
Quoted 21 lines · Andrew Morton
Quoted 20 lines · Jesper Juhl
Quoted 18 lines · Andrew Morton
Quoted 6 lines · Jesper Juhl
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/
Quoted 8 lines
Geode video breaks the build :
LD
init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o(.text+0x133f6): In function `gxfb_set_par':
: undefined reference tofb_dealloc_cmap' drivers/built-in.o(.text+0x13432): In functiongxfb_set_par':
: undefined reference to `fb_alloc_cmap'How'd you manage that? Those things are dragged in via
CONFIG_FB.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
with "make randconfig" - the config it generated for me (and which broke) is attached.
CONFIG_FB=m,CONFIG_FB_GEODE_GX=y. An easy mistake, that.Does it even make sense to build
CONFIG_FBmodular?
Whoops, broke it again with a different config (attached) :
LD init/built-in.o
LD vmlinux
kernel/built-in.o(.data+0x8b8): undefined reference to `uevent_helper'
make: *** [vmlinux] Error 1
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
Quoted 9 lines · Jesper Juhl
Quoted 8 lines · Andrew Morton
Quoted 5 lines · Jesper Juhl
Quoted 4 lines · Andrew Morton
Quoted 3 lines · Jesper Juhl
Quoted 1 line · Andrew Morton
CONFIG_FB=m,CONFIG_FB_GEODE_GX=y. An easy mistake, that.
Need to change CONFIG_FB_GEODE_GX to depends on (FB = y)
Quoted 3 lines
Does it even make sense to build
CONFIG_FBmodular?
If you're a developer.
Tony
PATCH 1/1 drivers/media/video/cpia2/cpia2_v4l.c cleanups
In reply to Andrew MortonQuoted 6 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...
+add-cpia2-camera-support.patchCPIA camera driver
This patch contains the following cleanups:
- make 2 needlessly global functions static
- remove cpia2_setup(): the driver already allows setting parameters through module_param(), and there's no reason for having two different ways for setting the same parameters
---
Documentation/video4linux/README.cpia2 | 2 - drivers/media/video/cpia2/cpia2_v4l.c | 29 +------------------------ 2 files changed, 3 insertions(+), 28 deletions(-)
Documentation/video4linux/README.cpia2 renamed from Documentation/video4linux/README.cpia2.old +1 -1
@@ -70,7 +70,7 @@ If the driver is compiled into the kernel, at boot time specify them like this: - cpia2=num_buffers:3,buffer_size:65535 + cpia2.num_buffers=3 cpia2.buffer_size=65535 What buffer size should I use? ------------------------------
drivers/media/video/cpia2/cpia2_v4l.c renamed from drivers/media/video/cpia2/cpia2_v4l.c.old +2 -27
@@ -2054,7 +2054,7 @@* cpia2_init/module_init * *****************************************************************************/ -int __init cpia2_init (void ) +static int __init cpia2_init (void ) {LOG ("%s v%d.%d.%d\n" ,ABOUT ,CPIA2_MAJ_VER ,CPIA2_MIN_VER ,CPIA2_PATCH_VER );
@@ -2069,37 +2069,12 @@* cpia2_exit/module_exit * *****************************************************************************/ -void __exit cpia2_exit(void) +static void __exit cpia2_exit(void) {cpia2_usb_cleanup ();schedule_timeout (2 *HZ ); } - -int __init cpia2_setup (char *str) -{ -while (str) { -if (!strncmp (str,"buffer_size:" ,12 )) { - buffer_size =simple_strtoul (str +13 , &str,10 ); - }else if (!strncmp (str,"num_buffers:" ,12 )) { - num_buffers =simple_strtoul (str +13 , &str,10 ); - }else if (!strncmp (str,"alternate:" ,10 )) { - alternate =simple_strtoul (str +11 , &str,10 ); - }else if (!strncmp (str,"video_nr:" ,9 )) { - video_nr =simple_strtoul (str +10 , &str,10 ); - }else if (!strncmp (str,"flicker_freq:" ,13 )) { - flicker_freq =simple_strtoul (str +14 , &str,10 ); - }else if (!strncmp (str,"flicker_mode:" ,13 )) { - flicker_mode =simple_strtoul (str +14 , &str,10 ); - }else { - ++str; - } - } -return 1 ; -} - -__setup ("cpia2=" , cpia2_setup); -module_init (cpia2_init);module_exit (cpia2_exit);
PATCH 1/1 kernel/params.c: make param_array() static
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...
+remove-module_parm.patch
...
Current 2.6.16 queue. Some of these are a bit questionable at this stage.
...
param_array() in kernel/params.c can now become static.
---
include/linux/moduleparam.h | 7 ------- kernel/params.c | 12 ++++++------ 2 files changed, 6 insertions(+), 13 deletions(-)
include/linux/moduleparam.h renamed from include/linux/moduleparam.h.old +0 -7
@@ -162,13 +162,6 @@extern int param_set_copystring (const char *val,struct kernel_param *kp);extern int param_get_string (char *buffer,struct kernel_param *kp); -int param_array (const char *name, -const char *val, -unsigned int min,unsigned int max, -void *elem,int elemsize, -int (*set)(const char *,struct kernel_param *kp), -int *num); -/* for exporting parameters in /sys/parameters */ struct module ;
kernel/params.c renamed from kernel/params.c.old +6 -6
@@ -265,12 +265,12 @@ }/* We cheat here and temporarily mangle the string. */ -int param_array (const char *name, -const char *val, -unsigned int min,unsigned int max, -void *elem,int elemsize, -int (*set)(const char *,struct kernel_param *kp), -int *num) +static int param_array (const char *name, +const char *val, +unsigned int min,unsigned int max, +void *elem,int elemsize, +int (*set)(const char *,struct kernel_param *kp), +int *num) {int ret;struct kernel_param kp;
PATCH 1/1 drivers/rtc/: make some structs static
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...(quoted diff) +4
-0+rtc-subsystem-class.patch +rtc-subsystem-arm-cleanup.patch +rtc-subsystem-i2c-cleanup.patch +rtc-subsystem-sysfs-interface.patch
Review
Quoted 10 lines
(quoted diff) +7
-0+rtc-subsystem-proc-interface.patch +rtc-subsystem-dev-interface.patch +rtc-subsystem-x1205-driver.patch +rtc-subsystem-test-device-driver.patch +rtc-subsystem-ds1672-driver.patch +rtc-subsystem-pcf8563-driver.patch +rtc-subsystem-rs5c372-driver.patch rtc subsystem rework. These patches are being updated.
This patch makes some needlessly global structs static.
---
drivers/rtc/rtc-dev.c | 2 +- drivers/rtc/rtc-proc.c | 2 +- drivers/rtc/rtc-sysfs.c | 2 +- drivers/rtc/rtc-test.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
drivers/rtc/rtc-dev.c renamed from drivers/rtc/rtc-dev.c.old +1 -1
@@ -330,7 +330,7 @@/* interface registration */ -struct class_interface rtc_dev_interface = { +static struct class_interface rtc_dev_interface = { .add = &rtc_dev_add_device, .remove = &rtc_dev_remove_device, };
drivers/rtc/rtc-proc.c renamed from drivers/rtc/rtc-proc.c.old +1 -1
@@ -135,7 +135,7 @@mutex_unlock (&rtc_lock); } -struct class_interface rtc_proc_interface = { +static struct class_interface rtc_proc_interface = { .add = &rtc_proc_add_device, .remove = &rtc_proc_remove_device, };
drivers/rtc/rtc-sysfs.c renamed from drivers/rtc/rtc-sysfs.c.old +1 -1
@@ -97,7 +97,7 @@/* interface registration */ -struct class_interface rtc_sysfs_interface = { +static struct class_interface rtc_sysfs_interface = { .add = &rtc_sysfs_add_device, .remove = &rtc_sysfs_remove_device, };
drivers/rtc/rtc-test.c renamed from drivers/rtc/rtc-test.c.old +1 -1
@@ -14,7 +14,7 @@#include <linux/rtc.h> #include <linux/platform_device.h> -struct platform_device *test0 =NULL , *test1 =NULL ; +static struct platform_device *test0 =NULL , *test1 =NULL ; static int test_rtc_read_alarm(struct device *dev,
PATCH 1/1 kernel/fork.c: make signal_cachep static
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...
+copy_process-cleanup-bad_fork_cleanup_signal.patch
...
More core process/pid/thread updates from Oleg.
...
signal_cachep can now become static.
---
include/linux/slab.h | 1 - kernel/fork.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-)
include/linux/slab.h renamed from include/linux/slab.h.old +0 -1
@@ -182,7 +182,6 @@extern kmem_cache_t *files_cachep;extern kmem_cache_t *filp_cachep;extern kmem_cache_t *fs_cachep; -extern kmem_cache_t *signal_cachep;extern kmem_cache_t *sighand_cachep;extern kmem_cache_t *bio_cachep;
kernel/fork.c renamed from kernel/fork.c.old +1 -1
@@ -84,7 +84,7 @@#endif /* SLAB cache for signal_struct structures (tsk->signal) */ -kmem_cache_t *signal_cachep; +static kmem_cache_t *signal_cachep;/* SLAB cache for sighand_struct structures (tsk->sighand) */ kmem_cache_t *sighand_cachep;
PATCH 1/1 net/dccp/ipv4.c: make struct dccp_v4_prot static
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...
git-net.patch
...
git trees.
...
There's no reason for struct dccp_v4_prot being global.
net/dccp/ipv4.c renamed from net/dccp/ipv4.c.old +1 -1
@@ -1022,7 +1022,7 @@ .twsk_obj_size = sizeof(struct inet_timewait_sock), }; -struct proto dccp_v4_prot = { +static struct proto dccp_v4_prot = { .name ="DCCP" , .owner =THIS_MODULE , .close = dccp_close,
Re: [-mm patch] net/dccp/ipv4.c: make struct dccp_v4_prot static
Quoted 18 lines · Adrian Bunk
Quoted 7 lines · Andrew Morton
...
Changes since 2.6.16-rc4-mm1:
...
git-net.patch
...
git trees.
...There's no reason for struct
dccp_v4_protbeing global.Signed-off-by Adrian Bunk <[email protected]>
net/dccp/ipv4.c 2006-02-25 04:32:53.000000000 +0100 line 1028
Quoted 8 lines
net/dccp/ipv4.c 2006-02-25 04:32:53.000000000 +0100 renamed from net/dccp/ipv4.c.old 2006-02-25 04:32:45.000000000 +0100 +1
-1@@ -1022,7 +1022,7 @@ .twsk_obj_size = sizeof(struct inet_timewait_sock), }; -struct proto dccp_v4_prot = { +static struct proto dccp_v4_prot = { .name = "DCCP", .owner = THIS_MODULE, .close = dccp_close,
Heck, the last series of patches were exactly to separate ipv4/ipv6 in DCCP more clearly, how could I forget the cherry on top (sticking this static in front of dccp_v4_prot)?
Eagle eyes indeed.
Thanks.
- Arnaldo
usbfs2 panic [Was: 2.6.16-rc4-mm2]
In reply to Andrew MortonQuoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/
[...]
Hello,
I catched this oops through booting due to Greg's inode usbfs2 patch. Here is camera-snapshot of the screen:
http://www.fi.muni.cz/~xslaby/sklad/panic.gif
Config:
http://www.fi.muni.cz/~xslaby/sklad/config-desk
regards,
--
Jiri Slaby www.fi.muni.cz/~xslaby
\_.-^-._ [email protected] _.-^-._/
B67499670407CE62ACC8 22A032CC55C339D47A7E
Re: usbfs2 panic [Was: 2.6.16-rc4-mm2]
Quoted 10 lines · Jiri Slaby
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc4/2.6.16-rc4-mm2/
[...]
Hello,I catched this oops through booting due to Greg's inode usbfs2 patch. Here is camera-snapshot of the screen:
http://www.fi.muni.cz/~xslaby/sklad/panic.gif
Config:
http://www.fi.muni.cz/~xslaby/sklad/config-desk
Thanks. For now just disable usbfs2, or make it a module and don't load it. It is _very_ raw and as you see, doesn't work properly. And, in working on it some more, usbfs2 is not even going to be a file system, but instead just rely on device nodes, like usbfs does today. That will allow us to proper set ACLs and not force distros to have to mount yet-another-filesytem.
thanks,
greg k-h