Skip to contentSkip to conversation

consolidated graphics config

PATCH/RFC Randy.Dunlap 1 participant 1 message Feb 27, 2006

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

From: Randy Dunlap <[email protected]>

Put AGP and DRM (DRI) under the Graphics config menu. Rearrange 2 of the backlight entries so that they are not orphaned. Tested with menuconfig, xconfig, & gconfig.

---
 drivers/char/Kconfig            |    4 ----
 drivers/char/agp/Kconfig        |    3 +++
 drivers/char/drm/Kconfig        |    3 +++
 drivers/video/Kconfig           |    9 +++++++++
 drivers/video/backlight/Kconfig |   33 ++++++++++++++++-----------------
 5 files changed, 31 insertions(+), 21 deletions(-)
drivers/char/Kconfig +0 -4
@@ -885,10 +885,6 @@ source "drivers/char/ftape/Kconfig"
 
 endmenu
 
-source "drivers/char/agp/Kconfig"
-
-source "drivers/char/drm/Kconfig"
-
 source "drivers/char/pcmcia/Kconfig"
 
 config MWAVE
drivers/video/Kconfig +9 -0
@@ -4,6 +4,12 @@
 
 menu "Graphics support"
 
+source "drivers/char/agp/Kconfig"
+
+source "drivers/char/drm/Kconfig"
+
+menu "Frame buffer driver support"
+
 config FB
 	tristate "Support for frame buffer devices"
 	---help---
@@ -1446,6 +1452,9 @@ config FB_VIRTUAL
 	  module will be called vfb.
 
 	  If unsure, say N.
+
+endmenu
+
 if VT
 	source "drivers/video/console/Kconfig"
 endif
drivers/char/agp/Kconfig +3 -0
@@ -1,3 +1,5 @@
+menu "AGP driver support"
+
 config AGP
 	tristate "/dev/agpgart (AGP Support)" if !GART_IOMMU
 	depends on ALPHA || IA64 || PPC || X86
@@ -169,3 +171,4 @@ config AGP_SGI_TIOCA
           This option gives you AGP GART support for the SGI TIO chipset
           for IA64 processors.
 
+endmenu
drivers/char/drm/Kconfig +3 -0
@@ -5,6 +5,8 @@
 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
 #
 
+menu "Direct Rendering Infrastructure (DRI) support"
+
 config DRM
 	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
 	depends on (AGP || AGP=n) && PCI
@@ -104,3 +106,4 @@ config DRM_SAVAGE
 	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 	  chipset. If M is selected the module will be called savage.
 
+endmenu
drivers/video/backlight/Kconfig +16 -17
@@ -24,6 +24,22 @@ config BACKLIGHT_DEVICE
 	depends on BACKLIGHT_CLASS_DEVICE
 	default y
 
+config BACKLIGHT_CORGI
+	tristate "Sharp Corgi Backlight Driver (SL-C7xx Series)"
+	depends on BACKLIGHT_DEVICE && PXA_SHARPSL
+	default y
+	help
+	  If you have a Sharp Zaurus SL-C7xx, say y to enable the
+	  backlight driver.
+
+config BACKLIGHT_HP680
+	tristate "HP Jornada 680 Backlight Driver"
+	depends on BACKLIGHT_DEVICE && SH_HP6XX
+	default y
+	help
+	  If you have a HP Jornada 680, say y to enable the
+	  backlight driver.
+
 config LCD_CLASS_DEVICE
         tristate "Lowlevel LCD controls"
 	depends on BACKLIGHT_LCD_SUPPORT
@@ -41,20 +57,3 @@ config LCD_DEVICE
 	bool
 	depends on LCD_CLASS_DEVICE
 	default y
-
-config BACKLIGHT_CORGI
-	tristate "Sharp Corgi Backlight Driver (SL-C7xx Series)"
-	depends on BACKLIGHT_DEVICE && PXA_SHARPSL
-	default y
-	help
-	  If you have a Sharp Zaurus SL-C7xx, say y to enable the
-	  backlight driver.
-
-config BACKLIGHT_HP680
-	tristate "HP Jornada 680 Backlight Driver"
-	depends on BACKLIGHT_DEVICE && SH_HP6XX
-	default y
-	help
-	  If you have a HP Jornada 680, say y to enable the
-	  backlight driver.
-

---