Skip to contentSkip to conversation

kexec x86_64: VFS: Cannot open root device, kernel panic

DISCUSSION li nux 1 participant 1 message Mar 1, 2006

lore
Share & tools
lore

li nux

author
#0 lore raw

On x86_64 I am trying out kexec/kdump
The root fs is reiserfs

1. Boot the current kernel with crashkernel=64M@16M

2. # cat /proc/cmdline root=/dev/cciss/c0d0p5 selinux=0 resume=/dev/cciss/c0d0p3 splash=silent numa =off crashkernel=64M@16M
3. Preload the capture kernel using
kexec --load-panic /boot/vmlinux-2.6.16-rc4-3-kdump --args-linux --append="root= /dev/cciss/c0d0p5 selinux=0 resume=/dev/cciss/c0d0p3 splash=silent numa=off"

4. force a panic echo c > /proc/sysrq-trigger

While booting the capture kernel, it panics with the following message:

VFS: Cannot open root device "cciss/c0d0p5" or unknown-block(0,0)
Please append a correct "root=" boot option

Kernel panic - not syncing: VFS: Unable to mount root

fs on unknown-block(0,0)

1. When the capture kernel boots what happens to the io/nw drivers and any other modules which were inserted into the first kernel
2. Is there anything wrong with the steps I followed

-lnxluv

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com