Skip to contentSkip to conversation

change kbuild to not rely on incorrect GNU make behavior

PATCH In review Paul Smith 6 participants 9 messages Mar 5, 2006 – Mar 29, 2006

Subsystems (7)
lore
Share & tools
lore

Paul Smith

author
#0 lore raw

PATCH 1/1 change kbuild to not rely on incorrect GNU make behavior

The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make.

For more details on the incorrect behavior, see:

http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html

Changes in this patch:
- Keep all targets that are to be marked .PHONY in a variable, PHONY.
- Add .PHONY: $(PHONY) to mark them properly.
- Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not.

---

Documentation/DocBook/Makefile +7 -1
diff -u -uprN linux-2.6.15-vanilla/Documentation/DocBook/Makefile linux-2.6.15/Documentation/DocBook/Makefile
@@ -28,7 +28,7 @@ PS_METHOD	= $(prefer-db2x)
 
 ###
 # The targets that may be used.
-.PHONY:	xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
 xmldocs: $(BOOKS)
@@ -211,3 +211,9 @@ clean-dirs := $(patsubst %.xml,%,$(DOCBO
 
 #man put files in man subdir - traverse down
 subdir- := man/
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
Makefile +32 -25

196 lines not on this page · raw message

arch/arm/Makefile +4 -1
diff -u -uprN linux-2.6.15-vanilla/arch/arm/Makefile linux-2.6.15/arch/arm/Makefile
@@ -1,6 +1,9 @@
 #
 # arch/arm/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -172,7 +176,7 @@ endif
 
 archprepare: maketools
 
-.PHONY: maketools FORCE
+PHONY += maketools FORCE
 maketools: include/linux/version.h include/asm-arm/.arch FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
arch/arm/boot/Makefile +4 -1
diff -u -uprN linux-2.6.15-vanilla/arch/arm/boot/Makefile linux-2.6.15/arch/arm/boot/Makefile
@@ -1,6 +1,9 @@
 #
 # arch/arm/boot/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -73,7 +77,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FO
 	$(call if_changed,objcopy)
 	@echo '  Kernel: $@ is ready'
 
-.PHONY: initrd FORCE
+PHONY += initrd FORCE
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)
arch/arm/boot/bootp/Makefile +4 -1
diff -u -uprN linux-2.6.15-vanilla/arch/arm/boot/bootp/Makefile linux-2.6.15/arch/arm/boot/bootp/Makefile
@@ -1,6 +1,9 @@
 #
 # linux/arch/arm/boot/bootp/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 
 LDFLAGS_bootp	:=-p --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
@@ -21,4 +25,4 @@ $(obj)/kernel.o: arch/arm/boot/zImage FO
 
 $(obj)/initrd.o: $(INITRD) FORCE
 
-.PHONY:	$(INITRD) FORCE
+PHONY += $(INITRD) FORCE
arch/arm26/Makefile +5 -2
diff -u -uprN linux-2.6.15-vanilla/arch/arm26/Makefile linux-2.6.15/arch/arm26/Makefile
@@ -1,6 +1,9 @@
 #
 # arch/arm26/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -49,9 +53,9 @@ all: zImage
 
 boot := arch/arm26/boot
 
-.PHONY: maketools FORCE
+PHONY += maketools FORCE
 maketools: FORCE
-	
+
 
 # Convert bzImage to zImage
 bzImage: vmlinux
arch/arm26/boot/Makefile +4 -1
diff -u -uprN linux-2.6.15-vanilla/arch/arm26/boot/Makefile linux-2.6.15/arch/arm26/boot/Makefile
@@ -1,6 +1,9 @@
 #
 # arch/arm26/boot/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -60,7 +64,7 @@ $(obj)/xipImage: vmlinux FORCE
 	@echo '  Kernel: $@ is ready'
 endif
 
-.PHONY: initrd
+PHONY += initrd
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)
arch/i386/Makefile +2 -2
diff -u -uprN linux-2.6.15-vanilla/arch/i386/Makefile linux-2.6.15/arch/i386/Makefile
@@ -102,8 +102,8 @@ AFLAGS += $(mflags-y)
 
 boot := arch/i386/boot
 
-.PHONY: zImage bzImage compressed zlilo bzlilo \
-	zdisk bzdisk fdimage fdimage144 fdimage288 install kernel_install
+PHONY += zImage bzImage compressed zlilo bzlilo \
+	 zdisk bzdisk fdimage fdimage144 fdimage288 install kernel_install
 
 all: bzImage
 
arch/ia64/Makefile +4 -1
diff -u -uprN linux-2.6.15-vanilla/arch/ia64/Makefile linux-2.6.15/arch/ia64/Makefile
@@ -1,6 +1,9 @@
 #
 # ia64/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -67,7 +71,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/ia64/
 
 boot := arch/ia64/hp/sim/boot
 
-.PHONY: boot compressed check
+PHONY += boot compressed check
 
 all: compressed unwcheck
 
arch/m32r/Makefile +4 -1
diff -u -uprN linux-2.6.15-vanilla/arch/m32r/Makefile linux-2.6.15/arch/m32r/Makefile
@@ -1,6 +1,9 @@
 #
 # m32r/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 
 LDFLAGS		:=
 OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
@@ -39,7 +43,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/m32r/
 
 boot := arch/m32r/boot
 
-.PHONY: zImage
+PHONY += zImage
 
 all: zImage
 
arch/powerpc/Makefile +1 -1
diff -u -uprN linux-2.6.15-vanilla/arch/powerpc/Makefile linux-2.6.15/arch/powerpc/Makefile
@@ -153,7 +153,7 @@ bzImage: zImage
 
 BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
 
-.PHONY: $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS)
 
 boot := arch/$(ARCH)/boot
 
arch/ppc/Makefile +1 -1
diff -u -uprN linux-2.6.15-vanilla/arch/ppc/Makefile linux-2.6.15/arch/ppc/Makefile
@@ -82,7 +82,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/power
 
 BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
 
-.PHONY: $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS)
 
 all: uImage zImage
 
arch/ppc/boot/Makefile +4 -1
diff -u -uprN linux-2.6.15-vanilla/arch/ppc/boot/Makefile linux-2.6.15/arch/ppc/boot/Makefile
@@ -1,6 +1,9 @@
 #
 # arch/ppc/boot/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -25,7 +29,7 @@ subdir-				+= simple openfirmware
 
 hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)
 
-.PHONY: $(BOOT_TARGETS) $(bootdir-y)
+PHONY += $(BOOT_TARGETS) $(bootdir-y)
 
 $(BOOT_TARGETS): $(bootdir-y)
 
arch/ppc/boot/openfirmware/Makefile +5 -2
diff -u -uprN linux-2.6.15-vanilla/arch/ppc/boot/openfirmware/Makefile linux-2.6.15/arch/ppc/boot/openfirmware/Makefile
@@ -1,5 +1,8 @@
 # Makefile for making bootable images on various OpenFirmware machines.
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # Paul Mackerras	January 1997
 #	XCOFF bootable images for PowerMacs
 # Geert Uytterhoeven	September 1997
@@ -150,7 +154,7 @@ $(images)/miboot.initrd.image: $(images)
 
 # The targets used on the make command-line
 
-.PHONY: zImage zImage.initrd
+PHONY += zImage zImage.initrd
 zImage:		 $(images)/vmlinux.coff 	\
 		 $(images)/vmlinux.elf-pmac	\
 		 $(images)/zImage.chrp		\
@@ -166,7 +170,7 @@ zImage.initrd:	 $(images)/vmlinux.initrd
 
 TFTPIMAGE	:= /tftpboot/zImage
 
-.PHONY: znetboot znetboot.initrd
+PHONY += znetboot znetboot.initrd
 znetboot:	$(images)/vmlinux.coff		\
 		$(images)/vmlinux.elf-pmac	\
 		$(images)/zImage.chrp
arch/sh/Makefile +1 -1
diff -u -uprN linux-2.6.15-vanilla/arch/sh/Makefile linux-2.6.15/arch/sh/Makefile
@@ -146,7 +146,7 @@ endif
 
 archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach
 
-.PHONY: maketools FORCE
+PHONY += maketools FORCE
 maketools:  include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
 
arch/um/Makefile +5 -2
diff -u -uprN linux-2.6.15-vanilla/arch/um/Makefile linux-2.6.15/arch/um/Makefile
@@ -1,4 +1,7 @@
-# 
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # Copyright (C) 2002 Jeff Dike ([email protected])
 # Licensed under the GPL
 #
@@ -83,7 +87,7 @@ CONFIG_KERNEL_HALF_GIGS ?= 0
 
 SIZE = (($(CONFIG_NEST_LEVEL) + $(CONFIG_KERNEL_HALF_GIGS)) * 0x20000000)
 
-.PHONY: linux
+PHONY += linux
 
 all: linux
 
arch/x86_64/Makefile +2 -2
diff -u -uprN linux-2.6.15-vanilla/arch/x86_64/Makefile linux-2.6.15/arch/x86_64/Makefile
@@ -62,8 +62,8 @@ drivers-$(CONFIG_OPROFILE)		+= arch/x86_
 
 boot := arch/x86_64/boot
 
-.PHONY: bzImage bzlilo install archmrproper \
-	fdimage fdimage144 fdimage288 archclean
+PHONY += bzImage bzlilo install archmrproper \
+	 fdimage fdimage144 fdimage288 archclean
 
 #Default target when executing "make"
 all: bzImage
scripts/Kbuild.include +4 -4
diff -u -uprN linux-2.6.15-vanilla/scripts/Kbuild.include linux-2.6.15/scripts/Kbuild.include
@@ -73,8 +73,8 @@ echo-cmd = $(if $($(quiet)cmd_$(1)), \
 # function to only execute the passed command if necessary
 # >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
 # note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
-# 
-if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+#
+if_changed = $(if $(strip $(filter-out $(PHONY),$?) $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
 	@set -e; \
 	$(echo-cmd) \
 	$(cmd_$(1)); \
@@ -82,7 +82,7 @@ if_changed = $(if $(strip $? $(call arg-
 
 # execute the command and also postprocess generated .d dependencies
 # file
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
+if_changed_dep = $(if $(strip $(filter-out $(PHONY),$?) $(filter-out FORCE $(wildcard $^),$^)\
 	$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),                  \
 	@set -e; \
 	$(echo-cmd) \
@@ -94,6 +94,6 @@ if_changed_dep = $(if $(strip $? $(filte
 # Usage: $(call if_changed_rule,foo)
 # will check if $(cmd_foo) changed, or any of the prequisites changed,
 # and if so will execute $(rule_foo)
-if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
+if_changed_rule = $(if $(strip $(filter-out $(PHONY),$?) $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
 			@set -e; \
 			$(rule_$(1)))
scripts/Makefile.build +9 -3
diff -u -uprN linux-2.6.15-vanilla/scripts/Makefile.build linux-2.6.15/scripts/Makefile.build
@@ -4,7 +4,7 @@
 
 src := $(obj)
 
-.PHONY: __build
+PHONY := __build
 __build:
 
 # Read .config if it exist, otherwise ignore
@@ -309,14 +309,14 @@ targets += $(multi-used-y) $(multi-used-
 # Descending
 # ---------------------------------------------------------------------------
 
-.PHONY: $(subdir-ym)
+PHONY += $(subdir-ym)
 $(subdir-ym):
 	$(Q)$(MAKE) $(build)=$@
 
 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
 # ---------------------------------------------------------------------------
 
-.PHONY: FORCE
+PHONY += FORCE
 
 FORCE:
 
@@ -331,3 +331,9 @@ cmd_files := $(wildcard $(foreach f,$(ta
 ifneq ($(cmd_files),)
   include $(cmd_files)
 endif
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/Makefile.clean +8 -2
diff -u -uprN linux-2.6.15-vanilla/scripts/Makefile.clean linux-2.6.15/scripts/Makefile.clean
@@ -4,7 +4,7 @@
 
 src := $(obj)
 
-.PHONY: __clean
+PHONY := __clean
 __clean:
 
 # Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
@@ -87,10 +87,16 @@ endif
 # Descending
 # ---------------------------------------------------------------------------
 
-.PHONY: $(subdir-ymn)
+PHONY += $(subdir-ymn)
 $(subdir-ymn):
 	$(Q)$(MAKE) $(clean)=$@
 
 # If quiet is set, only print short version of command
 
 cmd = @$(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/Makefile.modinst +8 -2
diff -u -uprN linux-2.6.15-vanilla/scripts/Makefile.modinst linux-2.6.15/scripts/Makefile.modinst
@@ -2,7 +2,7 @@
 # Installing modules
 # ==========================================================================
 
-.PHONY: __modinst
+PHONY := __modinst
 __modinst:
 
 include scripts/Kbuild.include
@@ -12,7 +12,7 @@ include scripts/Kbuild.include
 __modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
 modules := $(patsubst %.o,%.ko,$(wildcard $(__modules:.ko=.o)))
 
-.PHONY: $(modules)
+PHONY += $(modules)
 __modinst: $(modules)
 	@:
 
@@ -27,3 +27,9 @@ modinst_dir = $(if $(KBUILD_EXTMOD),$(ex
 
 $(modules):
 	$(call cmd,modules_install,$(MODLIB)/$(modinst_dir))
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/Makefile.modpost +9 -3
diff -u -uprN linux-2.6.15-vanilla/scripts/Makefile.modpost linux-2.6.15/scripts/Makefile.modpost
@@ -32,7 +32,7 @@
 # Step 4 is solely used to allow module versioning in external modules,
 # where the CRC of each module is retreived from the Module.symers file.
 
-.PHONY: _modpost
+PHONY := _modpost
 _modpost: __modpost
 
 include .config
@@ -57,7 +57,7 @@ quiet_cmd_modpost = MODPOST
 	$(if $(KBUILD_EXTMOD),-i,-o) $(symverfile) \
 	$(filter-out FORCE,$^)
 
-.PHONY: __modpost
+PHONY += __modpost
 __modpost: $(wildcard vmlinux) $(modules:.ko=.o) FORCE
 	$(call cmd,modpost)
 
@@ -94,7 +94,7 @@ targets += $(modules)
 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
 # ---------------------------------------------------------------------------
 
-.PHONY: FORCE
+PHONY += FORCE
 
 FORCE:
 
@@ -109,3 +109,9 @@ cmd_files := $(wildcard $(foreach f,$(ta
 ifneq ($(cmd_files),)
   include $(cmd_files)
 endif
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
Signature · 4 lines
-------------------------------------------------------------------------------
 Paul D. Smith <[email protected]>          Find some GNU make tips at:
 http://www.gnu.org                      http://make.paulandlesley.org
 "Please remain calm...I may be mad, but I am a professional." --Mad Scientist
#1 lore raw
Quoted 10 lines · Paul Smith

The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make.

For more details on the incorrect behavior, see:

http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html

Quoted 8 lines

Changes in this patch:
- Keep all targets that are to be marked .PHONY in a variable, PHONY.
- Add .PHONY: $(PHONY) to mark them properly.
- Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not.

Thanks Paul.
Adapted to -rc4 and applied to my kbuild tree which I have pushed out. For reference I added the applied patch below.

The patch will be included in 2.6.17 and will see exposure in -mm when Andrew does next -mm.

Sam

Documentation/DocBook/Makefile +7 -1
index 1c95588..2c6f66d 100644
@@ -28,7 +28,7 @@ PS_METHOD	= $(prefer-db2x)
 
 ###
 # The targets that may be used.
-.PHONY:	xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
 xmldocs: $(BOOKS)
@@ -211,3 +211,9 @@ clean-dirs := $(patsubst %.xml,%,$(DOCBO
 
 #man put files in man subdir - traverse down
 subdir- := man/
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
Makefile +35 -29

218 lines not on this page · raw message

arch/arm/Makefile +4 -1
index fbfc14a..585d334 100644
@@ -1,6 +1,9 @@
 #
 # arch/arm/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -176,7 +179,7 @@ endif
 
 archprepare: maketools
 
-.PHONY: maketools FORCE
+PHONY += maketools FORCE
 maketools: include/linux/version.h include/asm-arm/.arch FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
arch/arm/boot/Makefile +4 -1
index a174d63..ec9c400 100644
@@ -1,6 +1,9 @@
 #
 # arch/arm/boot/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -73,7 +76,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FO
 	$(call if_changed,objcopy)
 	@echo '  Kernel: $@ is ready'
 
-.PHONY: initrd FORCE
+PHONY += initrd FORCE
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)
arch/arm/boot/bootp/Makefile +4 -1
index 8e8879b..c394e30 100644
@@ -1,6 +1,9 @@
 #
 # linux/arch/arm/boot/bootp/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 
 LDFLAGS_bootp	:=-p --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
@@ -21,4 +24,4 @@ $(obj)/kernel.o: arch/arm/boot/zImage FO
 
 $(obj)/initrd.o: $(INITRD) FORCE
 
-.PHONY:	$(INITRD) FORCE
+PHONY += $(INITRD) FORCE
arch/arm26/Makefile +5 -2
index 844a9e4..fe91eda 100644
@@ -1,6 +1,9 @@
 #
 # arch/arm26/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -49,9 +52,9 @@ all: zImage
 
 boot := arch/arm26/boot
 
-.PHONY: maketools FORCE
+PHONY += maketools FORCE
 maketools: FORCE
-	
+
 
 # Convert bzImage to zImage
 bzImage: vmlinux
arch/arm26/boot/Makefile +4 -1
index b5c2277..68acb7b 100644
@@ -1,6 +1,9 @@
 #
 # arch/arm26/boot/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -60,7 +63,7 @@ $(obj)/xipImage: vmlinux FORCE
 	@echo '  Kernel: $@ is ready'
 endif
 
-.PHONY: initrd
+PHONY += initrd
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)
arch/i386/Makefile +2 -2
index 36bef65..ff6973a 100644
@@ -99,8 +99,8 @@ AFLAGS += $(mflags-y)
 
 boot := arch/i386/boot
 
-.PHONY: zImage bzImage compressed zlilo bzlilo \
-	zdisk bzdisk fdimage fdimage144 fdimage288 install
+PHONY += zImage bzImage compressed zlilo bzlilo \
+         zdisk bzdisk fdimage fdimage144 fdimage288 install
 
 all: bzImage
 
arch/ia64/Makefile +4 -1
index f722e1a..80ea750 100644
@@ -1,6 +1,9 @@
 #
 # ia64/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -62,7 +65,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/ia64/
 
 boot := arch/ia64/hp/sim/boot
 
-.PHONY: boot compressed check
+PHONY += boot compressed check
 
 all: compressed unwcheck
 
arch/m32r/Makefile +4 -1
index 983d438..229f66f 100644
@@ -1,6 +1,9 @@
 #
 # m32r/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 
 LDFLAGS		:=
 OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
@@ -39,7 +42,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/m32r/
 
 boot := arch/m32r/boot
 
-.PHONY: zImage
+PHONY += zImage
 
 all: zImage
 
arch/powerpc/Makefile +1 -1
index 5500ab5..5787d55 100644
@@ -150,7 +150,7 @@ CPPFLAGS_vmlinux.lds	:= -Upowerpc
 
 BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage
 
-.PHONY: $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS)
 
 boot := arch/$(ARCH)/boot
 
arch/ppc/Makefile +1 -1
index 98e940b..9fbdf54 100644
@@ -82,7 +82,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/power
 
 BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
 
-.PHONY: $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS)
 
 all: uImage zImage
 
arch/ppc/boot/Makefile +4 -1
index efd8ce5..84eec0b 100644
@@ -1,6 +1,9 @@
 #
 # arch/ppc/boot/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -25,7 +28,7 @@ subdir-				+= simple openfirmware
 
 hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)
 
-.PHONY: $(BOOT_TARGETS) $(bootdir-y)
+PHONY += $(BOOT_TARGETS) $(bootdir-y)
 
 $(BOOT_TARGETS): $(bootdir-y)
 
arch/ppc/boot/openfirmware/Makefile +5 -2
index 2a411ec..66b7397 100644
@@ -1,5 +1,8 @@
 # Makefile for making bootable images on various OpenFirmware machines.
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # Paul Mackerras	January 1997
 #	XCOFF bootable images for PowerMacs
 # Geert Uytterhoeven	September 1997
@@ -86,7 +89,7 @@ $(images)/zImage.chrp-rs6k $(images)/zIm
 
 # The targets used on the make command-line
 
-.PHONY: zImage zImage.initrd
+PHONY += zImage zImage.initrd
 zImage:		 $(images)/zImage.chrp		\
 		 $(images)/zImage.chrp-rs6k
 	@echo '  kernel: $@ is ready ($<)'
@@ -96,7 +99,7 @@ zImage.initrd:	 $(images)/zImage.initrd.
 
 TFTPIMAGE	:= /tftpboot/zImage
 
-.PHONY: znetboot znetboot.initrd
+PHONY += znetboot znetboot.initrd
 znetboot:	$(images)/zImage.chrp
 	cp $(images)/zImage.chrp      $(TFTPIMAGE).chrp$(END)
 	@echo '  kernel: $@ is ready ($<)'
arch/sh/Makefile +1 -1
index 08c9515..c72e17a 100644
@@ -172,7 +172,7 @@ include/asm-sh/.mach: $(wildcard include
 
 archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach
 
-.PHONY: maketools FORCE
+PHONY += maketools FORCE
 maketools:  include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
 
arch/um/Makefile +5 -2
index c58b657..8d14c7a 100644
@@ -1,4 +1,7 @@
-# 
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # Copyright (C) 2002 Jeff Dike ([email protected])
 # Licensed under the GPL
 #
@@ -88,7 +91,7 @@ CONFIG_KERNEL_HALF_GIGS ?= 0
 
 SIZE = (($(CONFIG_NEST_LEVEL) + $(CONFIG_KERNEL_HALF_GIGS)) * 0x20000000)
 
-.PHONY: linux
+PHONY += linux
 
 all: linux
 
arch/x86_64/Makefile +2 -2
index d7fd464..7405dfd 100644
@@ -67,8 +67,8 @@ drivers-$(CONFIG_OPROFILE)		+= arch/x86_
 
 boot := arch/x86_64/boot
 
-.PHONY: bzImage bzlilo install archmrproper \
-	fdimage fdimage144 fdimage288 archclean
+PHONY += bzImage bzlilo install archmrproper \
+	 fdimage fdimage144 fdimage288 archclean
 
 #Default target when executing "make"
 all: bzImage
scripts/Kbuild.include +8 -5
index c3d2e4e..59620b1 100644
@@ -116,16 +116,18 @@ make-cmd = $(subst \#,\\\#,$(subst $$,$$
 # function to only execute the passed command if necessary
 # >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
 # note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
-# 
-if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+#
+if_changed = $(if $(strip $(filter-out $(PHONY),$?)          \
+		$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
 	@set -e; \
 	$(echo-cmd) $(cmd_$(1)); \
 	echo 'cmd_$@ := $(make-cmd)' > $(@D)/.$(@F).cmd)
 
 # execute the command and also postprocess generated .d dependencies
 # file
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
-	$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),                  \
+if_changed_dep = $(if $(strip $(filter-out $(PHONY),$?)  \
+		$(filter-out FORCE $(wildcard $^),$^)    \
+	$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),     \
 	@set -e; \
 	$(echo-cmd) $(cmd_$(1)); \
 	scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(@D)/.$(@F).tmp; \
@@ -135,6 +137,7 @@ if_changed_dep = $(if $(strip $? $(filte
 # Usage: $(call if_changed_rule,foo)
 # will check if $(cmd_foo) changed, or any of the prequisites changed,
 # and if so will execute $(rule_foo)
-if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
+if_changed_rule = $(if $(strip $(filter-out $(PHONY),$?)            \
+			$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
 			@set -e; \
 			$(rule_$(1)))
scripts/Makefile.build +9 -3
index 6ac96ea..7afe3e7 100644
@@ -4,7 +4,7 @@
 
 src := $(obj)
 
-.PHONY: __build
+PHONY := __build
 __build:
 
 # Read .config if it exist, otherwise ignore
@@ -308,14 +308,14 @@ targets += $(multi-used-y) $(multi-used-
 # Descending
 # ---------------------------------------------------------------------------
 
-.PHONY: $(subdir-ym)
+PHONY += $(subdir-ym)
 $(subdir-ym):
 	$(Q)$(MAKE) $(build)=$@
 
 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
 # ---------------------------------------------------------------------------
 
-.PHONY: FORCE
+PHONY += FORCE
 
 FORCE:
 
@@ -330,3 +330,9 @@ cmd_files := $(wildcard $(foreach f,$(ta
 ifneq ($(cmd_files),)
   include $(cmd_files)
 endif
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/Makefile.clean +8 -2
index 8974ea5..cff3349 100644
@@ -4,7 +4,7 @@
 
 src := $(obj)
 
-.PHONY: __clean
+PHONY := __clean
 __clean:
 
 # Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
@@ -87,10 +87,16 @@ endif
 # Descending
 # ---------------------------------------------------------------------------
 
-.PHONY: $(subdir-ymn)
+PHONY += $(subdir-ymn)
 $(subdir-ymn):
 	$(Q)$(MAKE) $(clean)=$@
 
 # If quiet is set, only print short version of command
 
 cmd = @$(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/Makefile.modinst +8 -2
index 23fd1bd..2686dd5 100644
@@ -2,7 +2,7 @@
 # Installing modules
 # ==========================================================================
 
-.PHONY: __modinst
+PHONY := __modinst
 __modinst:
 
 include scripts/Kbuild.include
@@ -12,7 +12,7 @@ include scripts/Kbuild.include
 __modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
 modules := $(patsubst %.o,%.ko,$(wildcard $(__modules:.ko=.o)))
 
-.PHONY: $(modules)
+PHONY += $(modules)
 __modinst: $(modules)
 	@:
 
@@ -27,3 +27,9 @@ modinst_dir = $(if $(KBUILD_EXTMOD),$(ex
 
 $(modules):
 	$(call cmd,modules_install,$(MODLIB)/$(modinst_dir))
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/Makefile.modpost +9 -3
index 563e3c5..0cfbe1c 100644
@@ -32,7 +32,7 @@
 # Step 4 is solely used to allow module versioning in external modules,
 # where the CRC of each module is retrieved from the Module.symers file.
 
-.PHONY: _modpost
+PHONY := _modpost
 _modpost: __modpost
 
 include .config
@@ -60,7 +60,7 @@ quiet_cmd_modpost = MODPOST
 	$(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \
 	$(filter-out FORCE,$^)
 
-.PHONY: __modpost
+PHONY += __modpost
 __modpost: $(wildcard vmlinux) $(modules:.ko=.o) FORCE
 	$(call cmd,modpost)
 
@@ -97,7 +97,7 @@ targets += $(modules)
 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
 # ---------------------------------------------------------------------------
 
-.PHONY: FORCE
+PHONY += FORCE
 
 FORCE:
 
@@ -112,3 +112,9 @@ cmd_files := $(wildcard $(foreach f,$(ta
 ifneq ($(cmd_files),)
   include $(cmd_files)
 endif
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/kconfig/Makefile +2 -2
index 5280945..e6499db 100644
@@ -2,7 +2,7 @@
 # Kernel configuration targets
 # These targets are used from top-level makefile
 
-.PHONY: oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
+PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
 
 xconfig: $(obj)/qconf
 	$< arch/$(ARCH)/Kconfig
@@ -42,7 +42,7 @@ update-po-config: $(obj)/kxgettext
 	$(Q)rm -f arch/um/Kconfig_arch
 	$(Q)rm -f scripts/kconfig/linux_*.pot scripts/kconfig/config.pot
 
-.PHONY: randconfig allyesconfig allnoconfig allmodconfig defconfig
+PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
 
 randconfig: $(obj)/conf
 	$< -r arch/$(ARCH)/Kconfig
scripts/kconfig/lxdialog/Makefile +3 -3
index bbf4887..a8b0263 100644
@@ -7,10 +7,10 @@ check-lxdialog  := $(srctree)/$(src)/che
 # we really need to do so. (Do not call gcc as part of make mrproper)
 HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
 HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
- 
-HOST_EXTRACFLAGS += -DLOCALE 
 
-.PHONY: dochecklxdialog
+HOST_EXTRACFLAGS += -DLOCALE
+
+PHONY += dochecklxdialog
 $(obj)/dochecklxdialog:
 	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_LOADLIBES)
 
scripts/package/Makefile +5 -5
index c201ef0..d3038b7 100644
@@ -32,7 +32,7 @@ MKSPEC     := $(srctree)/scripts/package
 PREV       := set -e; cd ..;
 
 # rpm-pkg
-.PHONY: rpm-pkg rpm
+PHONY += rpm-pkg rpm
 
 $(objtree)/kernel.spec: $(MKSPEC) $(srctree)/Makefile
 	$(CONFIG_SHELL) $(MKSPEC) > $@
@@ -54,10 +54,10 @@ rpm-pkg rpm: $(objtree)/kernel.spec
 clean-files := $(objtree)/kernel.spec
 
 # binrpm-pkg
-.PHONY: binrpm-pkg
+PHONY += binrpm-pkg
 $(objtree)/binkernel.spec: $(MKSPEC) $(srctree)/Makefile
 	$(CONFIG_SHELL) $(MKSPEC) prebuilt > $@
-	
+
 binrpm-pkg: $(objtree)/binkernel.spec
 	$(MAKE) KBUILD_SRC=
 	set -e; \
@@ -72,7 +72,7 @@ clean-files += $(objtree)/binkernel.spec
 # Deb target
 # ---------------------------------------------------------------------------
 #
-.PHONY: deb-pkg
+PHONY += deb-pkg
 deb-pkg:
 	$(MAKE) KBUILD_SRC=
 	$(CONFIG_SHELL) $(srctree)/scripts/package/builddeb
@@ -82,7 +82,7 @@ clean-dirs += $(objtree)/debian/
 
 # tarball targets
 # ---------------------------------------------------------------------------
-.PHONY: tar%pkg
+PHONY += tar%pkg
 tar%pkg:
 	$(MAKE) KBUILD_SRC=
 	$(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
#2 lore raw

%% Sam Ravnborg <[email protected]> writes:

sr> Thanks Paul.
sr> Adapted to -rc4 and applied to my kbuild tree which I have pushed out. sr> For reference I added the applied patch below.

OK. Note that this:

sr> -.PHONY: tar%pkg
sr> +PHONY += tar%pkg
sr> tar%pkg:

won't do what you expect. tar%pkg is a pattern rule, but .PHONY doesn't take patterns so you're declaring the actual file named literally 'tar%pkg' to be phony.

Cheers!

Signature · 4 lines
-------------------------------------------------------------------------------
 Paul D. Smith <[email protected]>          Find some GNU make tips at:
 http://www.gnu.org                      http://make.paulandlesley.org
 "Please remain calm...I may be mad, but I am a professional." --Mad Scientist
#3 lore raw
Quoted 9 lines · Paul D. Smith

OK. Note that this:

sr> -.PHONY: tar%pkg
sr> +PHONY += tar%pkg
sr> tar%pkg:

won't do what you expect. tar%pkg is a pattern rule, but .PHONY doesn't take patterns so you're declaring the actual file named literally 'tar%pkg' to be phony.

Easy to fix. There are currently three flavours of tar-packages:

tar-pkg
targz-pkg
tarbz2-pkg

Just add them individually.

MfG, JBG

Signature · 4 lines
Jan-Benedict Glaw       [email protected]    . +49-172-7608481             _ O _
"Eine Freie Meinung in  einem Freien Kopf    | Gegen Zensur | Gegen Krieg  _ _ O
 für einen Freien Staat voll Freier Bürger"  | im Internet! |   im Irak!   O O O
ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA));
#4 lore raw
In reply to Paul D. Smith
Quoted 8 lines · Paul D. Smith

%% Sam Ravnborg <[email protected]> writes:

sr> Thanks Paul.
sr> Adapted to -rc4 and applied to my kbuild tree which I have pushed out. sr> For reference I added the applied patch below.

OK. Note that this:

Quoted 7 lines

sr> -.PHONY: tar%pkg
sr> +PHONY += tar%pkg
sr> tar%pkg:

won't do what you expect. tar%pkg is a pattern rule, but .PHONY doesn't take patterns so you're declaring the actual file named literally 'tar%pkg' to be phony.

So I can just let all relevant target rules include FORCE as prerequisite and skip the PHONY part all together.
Thats what FORCE is there for anyway so this is just normal kbuild style anyway.

Sam

#5 lore raw
In reply to Sam Ravnborg
Quoted 18 lines · Sam Ravnborg
Quoted 17 lines · Paul Smith

The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make.

For more details on the incorrect behavior, see:

http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html

Changes in this patch:
- Keep all targets that are to be marked .PHONY in a variable, PHONY.
- Add .PHONY: $(PHONY) to mark them properly.
- Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not.

Quoted 8 lines
Quoted 1 line

Thanks Paul.
Adapted to -rc4 and applied to my kbuild tree which I have pushed out. For reference I added the applied patch below.

The patch will be included in 2.6.17 and will see exposure in -mm when Andrew does next -mm.

Sam, this was merged into Linus' tree post v2.6.16 (like you intended), but, won't the window between now and 2.6.17 be a little too big for such a fix? Debian etch (and sid) already ships with the affected make version:

  $ make -v | head -1
  GNU Make 3.81rc1

Now, this patch re-based against 2.6.16 is still too big for -stable (~830 lines plus context). I'm Cc'ing -stable team here for comments, and also because this will continue to bite between -stable releases. Should they decide to pick it up, I'll post re-based version as a reply.

Con also added to Cc: since he's already shipping this with 2.6.16-ck2.

Thanks.

Quoted 836 lines
Documentation/DocBook/Makefile +7 -1
index 1c95588..2c6f66d 100644
@@ -28,7 +28,7 @@ PS_METHOD	= $(prefer-db2x)
 
 ###
 # The targets that may be used.
-.PHONY:	xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
 xmldocs: $(BOOKS)
@@ -211,3 +211,9 @@ clean-dirs := $(patsubst %.xml,%,$(DOCBO
 
 #man put files in man subdir - traverse down
 subdir- := man/
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
Makefile +35 -29
index 12c8d71..a59c1e2 100644
@@ -95,7 +95,7 @@ ifdef O
 endif
 
 # That's our default target when none is given on the command line
-.PHONY: _all
+PHONY := _all
 _all:
 
 ifneq ($(KBUILD_OUTPUT),)
@@ -106,7 +106,7 @@ KBUILD_OUTPUT := $(shell cd $(KBUILD_OUT
 $(if $(KBUILD_OUTPUT),, \
      $(error output directory "$(saved-output)" does not exist))
 
-.PHONY: $(MAKECMDGOALS)
+PHONY += $(MAKECMDGOALS)
 
 $(filter-out _all,$(MAKECMDGOALS)) _all:
 	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
@@ -123,7 +123,7 @@ ifeq ($(skip-makefile),)
 
 # If building an external module we do not care about the all: rule
 # but instead _all depend on modules
-.PHONY: all
+PHONY += all
 ifeq ($(KBUILD_EXTMOD),)
 _all: all
 else
@@ -337,14 +337,14 @@ export RCS_TAR_IGNORE := --exclude SCCS 
 # Rules shared between *config targets and build targets
 
 # Basic helpers built in scripts/
-.PHONY: scripts_basic
+PHONY += scripts_basic
 scripts_basic:
 	$(Q)$(MAKE) $(build)=scripts/basic
 
 # To avoid any implicit rule to kick in, define an empty command.
 scripts/basic/%: scripts_basic ;
 
-.PHONY: outputmakefile
+PHONY += outputmakefile
 # outputmakefile generate a Makefile to be placed in output directory, if
 # using a seperate output directory. This allows convinient use
 # of make in output directory
@@ -420,7 +420,7 @@ ifeq ($(KBUILD_EXTMOD),)
 # Additional helpers built in scripts/
 # Carefully list dependencies so we do not try to build scripts twice
 # in parrallel
-.PHONY: scripts
+PHONY += scripts
 scripts: scripts_basic include/config/MARKER
 	$(Q)$(MAKE) $(build)=$(@)
 
@@ -720,7 +720,7 @@ $(sort $(vmlinux-init) $(vmlinux-main)) 
 # make menuconfig etc.
 # Error messages still appears in the original language
 
-.PHONY: $(vmlinux-dirs)
+PHONY += $(vmlinux-dirs)
 $(vmlinux-dirs): prepare scripts
 	$(Q)$(MAKE) $(build)=$@
 
@@ -773,10 +773,10 @@ kernelrelease = $(KERNELVERSION)$(localv
 # version.h and scripts_basic is processed / created.
 
 # Listed in dependency order
-.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
 
 # prepare-all is deprecated, use prepare as valid replacement
-.PHONY: prepare-all
+PHONY += prepare-all
 
 # prepare3 is used to check if we are building in a separate output directory,
 # and if so do:
@@ -857,7 +857,7 @@ include/linux/version.h: $(srctree)/Make
 
 # ---------------------------------------------------------------------------
 
-.PHONY: depend dep
+PHONY += depend dep
 depend dep:
 	@echo '*** Warning: make $@ is unnecessary now.'
 
@@ -872,21 +872,21 @@ all: modules
 
 #	Build modules
 
-.PHONY: modules
+PHONY += modules
 modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
 	@echo '  Building modules, stage 2.';
 	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
 
 
 # Target to prepare building external modules
-.PHONY: modules_prepare
+PHONY += modules_prepare
 modules_prepare: prepare scripts
 
 # Target to install modules
-.PHONY: modules_install
+PHONY += modules_install
 modules_install: _modinst_ _modinst_post
 
-.PHONY: _modinst_
+PHONY += _modinst_
 _modinst_:
 	@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
 		echo "Warning: you may need to install module-init-tools"; \
@@ -913,7 +913,7 @@ depmod_opts	:=
 else
 depmod_opts	:= -b $(INSTALL_MOD_PATH) -r
 endif
-.PHONY: _modinst_post
+PHONY += _modinst_post
 _modinst_post: _modinst_
 	if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
 
@@ -956,7 +956,7 @@ clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
 clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
 
-.PHONY: $(clean-dirs) clean archclean
+PHONY += $(clean-dirs) clean archclean
 $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
@@ -974,7 +974,7 @@ mrproper: rm-dirs  := $(wildcard $(MRPRO
 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
 mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
 
-.PHONY: $(mrproper-dirs) mrproper archmrproper
+PHONY += $(mrproper-dirs) mrproper archmrproper
 $(mrproper-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
 
@@ -984,7 +984,7 @@ mrproper: clean archmrproper $(mrproper-
 
 # distclean
 #
-.PHONY: distclean
+PHONY += distclean
 
 distclean: mrproper
 	@find $(srctree) $(RCS_FIND_IGNORE) \
@@ -1000,7 +1000,7 @@ distclean: mrproper
 # rpm target kept for backward compatibility
 package-dir	:= $(srctree)/scripts/package
 
-.PHONY: %-pkg rpm
+PHONY += %-pkg rpm
 
 %pkg: FORCE
 	$(Q)$(MAKE) -f $(package-dir)/Makefile $@
@@ -1092,12 +1092,12 @@ else # KBUILD_EXTMOD
 
 # We are always building modules
 KBUILD_MODULES := 1
-.PHONY: crmodverdir
+PHONY += crmodverdir
 crmodverdir:
 	$(Q)rm -rf $(MODVERDIR)
 	$(Q)mkdir -p $(MODVERDIR)
 
-.PHONY: $(objtree)/Module.symvers
+PHONY += $(objtree)/Module.symvers
 $(objtree)/Module.symvers:
 	@test -e $(objtree)/Module.symvers || ( \
 	echo; \
@@ -1106,7 +1106,7 @@ $(objtree)/Module.symvers:
 	echo )
 
 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
-.PHONY: $(module-dirs) modules
+PHONY += $(module-dirs) modules
 $(module-dirs): crmodverdir $(objtree)/Module.symvers
 	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
 
@@ -1114,11 +1114,11 @@ modules: $(module-dirs)
 	@echo '  Building modules, stage 2.';
 	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
 
-.PHONY: modules_install
+PHONY += modules_install
 modules_install: _emodinst_ _emodinst_post
 
-install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)	
-.PHONY: _emodinst_
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
 _emodinst_:
 	$(Q)rm -rf $(MODLIB)/$(install-dir)
 	$(Q)mkdir -p $(MODLIB)/$(install-dir)
@@ -1133,13 +1133,13 @@ quiet_cmd_depmod = DEPMOD  $(KERNELRELEA
 		      $(KERNELRELEASE);                       \
                    fi
 
-.PHONY: _emodinst_post
+PHONY += _emodinst_post
 _emodinst_post: _emodinst_
 	$(call cmd,depmod)
 
 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
 
-.PHONY: $(clean-dirs) clean
+PHONY += $(clean-dirs) clean
 $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
@@ -1161,7 +1161,7 @@ help:
 	@echo  ''
 
 # Dummies...
-.PHONY: prepare scripts
+PHONY += prepare scripts
 prepare: ;
 scripts: ;
 endif # KBUILD_EXTMOD
@@ -1274,7 +1274,7 @@ namespacecheck:
 endif #ifeq ($(config-targets),1)
 endif #ifeq ($(mixed-targets),1)
 
-.PHONY: checkstack
+PHONY += checkstack
 checkstack:
 	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
 	$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
@@ -1357,4 +1357,10 @@ clean := -f $(if $(KBUILD_SRC),$(srctree
 
 endif	# skip-makefile
 
+PHONY += FORCE
 FORCE:
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+.PHONY: $(PHONY)
arch/arm/Makefile +4 -1
index fbfc14a..585d334 100644
@@ -1,6 +1,9 @@
 #
 # arch/arm/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -176,7 +179,7 @@ endif
 
 archprepare: maketools
 
-.PHONY: maketools FORCE
+PHONY += maketools FORCE
 maketools: include/linux/version.h include/asm-arm/.arch FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
arch/arm/boot/Makefile +4 -1
index a174d63..ec9c400 100644
@@ -1,6 +1,9 @@
 #
 # arch/arm/boot/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -73,7 +76,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FO
 	$(call if_changed,objcopy)
 	@echo '  Kernel: $@ is ready'
 
-.PHONY: initrd FORCE
+PHONY += initrd FORCE
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)
arch/arm/boot/bootp/Makefile +4 -1
index 8e8879b..c394e30 100644
@@ -1,6 +1,9 @@
 #
 # linux/arch/arm/boot/bootp/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 
 LDFLAGS_bootp	:=-p --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
@@ -21,4 +24,4 @@ $(obj)/kernel.o: arch/arm/boot/zImage FO
 
 $(obj)/initrd.o: $(INITRD) FORCE
 
-.PHONY:	$(INITRD) FORCE
+PHONY += $(INITRD) FORCE
arch/arm26/Makefile +5 -2
index 844a9e4..fe91eda 100644
@@ -1,6 +1,9 @@
 #
 # arch/arm26/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -49,9 +52,9 @@ all: zImage
 
 boot := arch/arm26/boot
 
-.PHONY: maketools FORCE
+PHONY += maketools FORCE
 maketools: FORCE
-	
+
 
 # Convert bzImage to zImage
 bzImage: vmlinux
arch/arm26/boot/Makefile +4 -1
index b5c2277..68acb7b 100644
@@ -1,6 +1,9 @@
 #
 # arch/arm26/boot/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -60,7 +63,7 @@ $(obj)/xipImage: vmlinux FORCE
 	@echo '  Kernel: $@ is ready'
 endif
 
-.PHONY: initrd
+PHONY += initrd
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)
arch/i386/Makefile +2 -2
index 36bef65..ff6973a 100644
@@ -99,8 +99,8 @@ AFLAGS += $(mflags-y)
 
 boot := arch/i386/boot
 
-.PHONY: zImage bzImage compressed zlilo bzlilo \
-	zdisk bzdisk fdimage fdimage144 fdimage288 install
+PHONY += zImage bzImage compressed zlilo bzlilo \
+         zdisk bzdisk fdimage fdimage144 fdimage288 install
 
 all: bzImage
 
arch/ia64/Makefile +4 -1
index f722e1a..80ea750 100644
@@ -1,6 +1,9 @@
 #
 # ia64/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -62,7 +65,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/ia64/
 
 boot := arch/ia64/hp/sim/boot
 
-.PHONY: boot compressed check
+PHONY += boot compressed check
 
 all: compressed unwcheck
 
arch/m32r/Makefile +4 -1
index 983d438..229f66f 100644
@@ -1,6 +1,9 @@
 #
 # m32r/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 
 LDFLAGS		:=
 OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
@@ -39,7 +42,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/m32r/
 
 boot := arch/m32r/boot
 
-.PHONY: zImage
+PHONY += zImage
 
 all: zImage
 
arch/powerpc/Makefile +1 -1
index 5500ab5..5787d55 100644
@@ -150,7 +150,7 @@ CPPFLAGS_vmlinux.lds	:= -Upowerpc
 
 BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage
 
-.PHONY: $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS)
 
 boot := arch/$(ARCH)/boot
 
arch/ppc/Makefile +1 -1
index 98e940b..9fbdf54 100644
@@ -82,7 +82,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/power
 
 BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
 
-.PHONY: $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS)
 
 all: uImage zImage
 
arch/ppc/boot/Makefile +4 -1
index efd8ce5..84eec0b 100644
@@ -1,6 +1,9 @@
 #
 # arch/ppc/boot/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -25,7 +28,7 @@ subdir-				+= simple openfirmware
 
 hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)
 
-.PHONY: $(BOOT_TARGETS) $(bootdir-y)
+PHONY += $(BOOT_TARGETS) $(bootdir-y)
 
 $(BOOT_TARGETS): $(bootdir-y)
 
arch/ppc/boot/openfirmware/Makefile +5 -2
index 2a411ec..66b7397 100644
@@ -1,5 +1,8 @@
 # Makefile for making bootable images on various OpenFirmware machines.
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # Paul Mackerras	January 1997
 #	XCOFF bootable images for PowerMacs
 # Geert Uytterhoeven	September 1997
@@ -86,7 +89,7 @@ $(images)/zImage.chrp-rs6k $(images)/zIm
 
 # The targets used on the make command-line
 
-.PHONY: zImage zImage.initrd
+PHONY += zImage zImage.initrd
 zImage:		 $(images)/zImage.chrp		\
 		 $(images)/zImage.chrp-rs6k
 	@echo '  kernel: $@ is ready ($<)'
@@ -96,7 +99,7 @@ zImage.initrd:	 $(images)/zImage.initrd.
 
 TFTPIMAGE	:= /tftpboot/zImage
 
-.PHONY: znetboot znetboot.initrd
+PHONY += znetboot znetboot.initrd
 znetboot:	$(images)/zImage.chrp
 	cp $(images)/zImage.chrp      $(TFTPIMAGE).chrp$(END)
 	@echo '  kernel: $@ is ready ($<)'
arch/sh/Makefile +1 -1
index 08c9515..c72e17a 100644
@@ -172,7 +172,7 @@ include/asm-sh/.mach: $(wildcard include
 
 archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach
 
-.PHONY: maketools FORCE
+PHONY += maketools FORCE
 maketools:  include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
 
arch/um/Makefile +5 -2
index c58b657..8d14c7a 100644
@@ -1,4 +1,7 @@
-# 
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # Copyright (C) 2002 Jeff Dike ([email protected])
 # Licensed under the GPL
 #
@@ -88,7 +91,7 @@ CONFIG_KERNEL_HALF_GIGS ?= 0
 
 SIZE = (($(CONFIG_NEST_LEVEL) + $(CONFIG_KERNEL_HALF_GIGS)) * 0x20000000)
 
-.PHONY: linux
+PHONY += linux
 
 all: linux
 
arch/x86_64/Makefile +2 -2
index d7fd464..7405dfd 100644
@@ -67,8 +67,8 @@ drivers-$(CONFIG_OPROFILE)		+= arch/x86_
 
 boot := arch/x86_64/boot
 
-.PHONY: bzImage bzlilo install archmrproper \
-	fdimage fdimage144 fdimage288 archclean
+PHONY += bzImage bzlilo install archmrproper \
+	 fdimage fdimage144 fdimage288 archclean
 
 #Default target when executing "make"
 all: bzImage
scripts/Kbuild.include +8 -5
index c3d2e4e..59620b1 100644
@@ -116,16 +116,18 @@ make-cmd = $(subst \#,\\\#,$(subst $$,$$
 # function to only execute the passed command if necessary
 # >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
 # note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
-# 
-if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+#
+if_changed = $(if $(strip $(filter-out $(PHONY),$?)          \
+		$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
 	@set -e; \
 	$(echo-cmd) $(cmd_$(1)); \
 	echo 'cmd_$@ := $(make-cmd)' > $(@D)/.$(@F).cmd)
 
 # execute the command and also postprocess generated .d dependencies
 # file
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
-	$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),                  \
+if_changed_dep = $(if $(strip $(filter-out $(PHONY),$?)  \
+		$(filter-out FORCE $(wildcard $^),$^)    \
+	$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),     \
 	@set -e; \
 	$(echo-cmd) $(cmd_$(1)); \
 	scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(@D)/.$(@F).tmp; \
@@ -135,6 +137,7 @@ if_changed_dep = $(if $(strip $? $(filte
 # Usage: $(call if_changed_rule,foo)
 # will check if $(cmd_foo) changed, or any of the prequisites changed,
 # and if so will execute $(rule_foo)
-if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
+if_changed_rule = $(if $(strip $(filter-out $(PHONY),$?)            \
+			$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
 			@set -e; \
 			$(rule_$(1)))
scripts/Makefile.build +9 -3
index 6ac96ea..7afe3e7 100644
@@ -4,7 +4,7 @@
 
 src := $(obj)
 
-.PHONY: __build
+PHONY := __build
 __build:
 
 # Read .config if it exist, otherwise ignore
@@ -308,14 +308,14 @@ targets += $(multi-used-y) $(multi-used-
 # Descending
 # ---------------------------------------------------------------------------
 
-.PHONY: $(subdir-ym)
+PHONY += $(subdir-ym)
 $(subdir-ym):
 	$(Q)$(MAKE) $(build)=$@
 
 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
 # ---------------------------------------------------------------------------
 
-.PHONY: FORCE
+PHONY += FORCE
 
 FORCE:
 
@@ -330,3 +330,9 @@ cmd_files := $(wildcard $(foreach f,$(ta
 ifneq ($(cmd_files),)
   include $(cmd_files)
 endif
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/Makefile.clean +8 -2
index 8974ea5..cff3349 100644
@@ -4,7 +4,7 @@
 
 src := $(obj)
 
-.PHONY: __clean
+PHONY := __clean
 __clean:
 
 # Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
@@ -87,10 +87,16 @@ endif
 # Descending
 # ---------------------------------------------------------------------------
 
-.PHONY: $(subdir-ymn)
+PHONY += $(subdir-ymn)
 $(subdir-ymn):
 	$(Q)$(MAKE) $(clean)=$@
 
 # If quiet is set, only print short version of command
 
 cmd = @$(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/Makefile.modinst +8 -2
index 23fd1bd..2686dd5 100644
@@ -2,7 +2,7 @@
 # Installing modules
 # ==========================================================================
 
-.PHONY: __modinst
+PHONY := __modinst
 __modinst:
 
 include scripts/Kbuild.include
@@ -12,7 +12,7 @@ include scripts/Kbuild.include
 __modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
 modules := $(patsubst %.o,%.ko,$(wildcard $(__modules:.ko=.o)))
 
-.PHONY: $(modules)
+PHONY += $(modules)
 __modinst: $(modules)
 	@:
 
@@ -27,3 +27,9 @@ modinst_dir = $(if $(KBUILD_EXTMOD),$(ex
 
 $(modules):
 	$(call cmd,modules_install,$(MODLIB)/$(modinst_dir))
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/Makefile.modpost +9 -3
index 563e3c5..0cfbe1c 100644
@@ -32,7 +32,7 @@
 # Step 4 is solely used to allow module versioning in external modules,
 # where the CRC of each module is retrieved from the Module.symers file.
 
-.PHONY: _modpost
+PHONY := _modpost
 _modpost: __modpost
 
 include .config
@@ -60,7 +60,7 @@ quiet_cmd_modpost = MODPOST
 	$(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \
 	$(filter-out FORCE,$^)
 
-.PHONY: __modpost
+PHONY += __modpost
 __modpost: $(wildcard vmlinux) $(modules:.ko=.o) FORCE
 	$(call cmd,modpost)
 
@@ -97,7 +97,7 @@ targets += $(modules)
 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
 # ---------------------------------------------------------------------------
 
-.PHONY: FORCE
+PHONY += FORCE
 
 FORCE:
 
@@ -112,3 +112,9 @@ cmd_files := $(wildcard $(foreach f,$(ta
 ifneq ($(cmd_files),)
   include $(cmd_files)
 endif
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
scripts/kconfig/Makefile +2 -2
index 5280945..e6499db 100644
@@ -2,7 +2,7 @@
 # Kernel configuration targets
 # These targets are used from top-level makefile
 
-.PHONY: oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
+PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
 
 xconfig: $(obj)/qconf
 	$< arch/$(ARCH)/Kconfig
@@ -42,7 +42,7 @@ update-po-config: $(obj)/kxgettext
 	$(Q)rm -f arch/um/Kconfig_arch
 	$(Q)rm -f scripts/kconfig/linux_*.pot scripts/kconfig/config.pot
 
-.PHONY: randconfig allyesconfig allnoconfig allmodconfig defconfig
+PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
 
 randconfig: $(obj)/conf
 	$< -r arch/$(ARCH)/Kconfig
scripts/kconfig/lxdialog/Makefile +3 -3
index bbf4887..a8b0263 100644
@@ -7,10 +7,10 @@ check-lxdialog  := $(srctree)/$(src)/che
 # we really need to do so. (Do not call gcc as part of make mrproper)
 HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
 HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
- 
-HOST_EXTRACFLAGS += -DLOCALE 
 
-.PHONY: dochecklxdialog
+HOST_EXTRACFLAGS += -DLOCALE
+
+PHONY += dochecklxdialog
 $(obj)/dochecklxdialog:
 	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_LOADLIBES)
 
scripts/package/Makefile +5 -5
index c201ef0..d3038b7 100644
@@ -32,7 +32,7 @@ MKSPEC     := $(srctree)/scripts/package
 PREV       := set -e; cd ..;
 
 # rpm-pkg
-.PHONY: rpm-pkg rpm
+PHONY += rpm-pkg rpm
 
 $(objtree)/kernel.spec: $(MKSPEC) $(srctree)/Makefile
 	$(CONFIG_SHELL) $(MKSPEC) > $@
@@ -54,10 +54,10 @@ rpm-pkg rpm: $(objtree)/kernel.spec
 clean-files := $(objtree)/kernel.spec
 
 # binrpm-pkg
-.PHONY: binrpm-pkg
+PHONY += binrpm-pkg
 $(objtree)/binkernel.spec: $(MKSPEC) $(srctree)/Makefile
 	$(CONFIG_SHELL) $(MKSPEC) prebuilt > $@
-	
+
 binrpm-pkg: $(objtree)/binkernel.spec
 	$(MAKE) KBUILD_SRC=
 	set -e; \
@@ -72,7 +72,7 @@ clean-files += $(objtree)/binkernel.spec
 # Deb target
 # ---------------------------------------------------------------------------
 #
-.PHONY: deb-pkg
+PHONY += deb-pkg
 deb-pkg:
 	$(MAKE) KBUILD_SRC=
 	$(CONFIG_SHELL) $(srctree)/scripts/package/builddeb
@@ -82,7 +82,7 @@ clean-dirs += $(objtree)/debian/
 
 # tarball targets
 # ---------------------------------------------------------------------------
-.PHONY: tar%pkg
+PHONY += tar%pkg
 tar%pkg:
 	$(MAKE) KBUILD_SRC=
 	$(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
#6 lore raw
Quoted 5 lines · On Wed, 29 Mar 2006 08:15:01 -0500 [email protected] (Arthur Othieno) wrote:

Sam, this was merged into Linus' tree post v2.6.16 (like you intended), but, won't the window between now and 2.6.17 be a little too big for such a fix? Debian etch (and sid) already ships with the affected make version:

Quoted 7 lines
  $ make -v | head -1
  GNU Make 3.81rc1

Now, this patch re-based against 2.6.16 is still too big for -stable (~830 lines plus context). I'm Cc'ing -stable team here for comments, and also because this will continue to bite between -stable releases. Should they decide to pick it up, I'll post re-based version as a reply.

You should note this changelog entry from Debian sid:

make-dfsg (3.80+3.81.rc2-1) unstable; urgency=low

* New upstream release candidate.
* Bug fix: "Make always recompiles everything in the Linux Kernel.", thanks to Neil Brown. This is really a bug in the kernel build system, not make. However, this release defers the change so as not to trigger
the bug. (Closes: #356552, #356630).

-- Manoj Srivastava <[email protected]> Mon, 20 Mar 2006 15:37:15 -0600

So that the make in sid is no longer affected and (hopefully) this version will make its way into etch soon.

Signature · 3 lines
Cheers,
Stephen Rothwell                    [email protected]
http://www.canb.auug.org.au/~sfr/
#7 lore raw
In reply to Arthur Othieno
Quoted 2 lines · %% [email protected] (Arthur Othieno) writes:
Quoted 2 lines

The patch will be included in 2.6.17 and will see exposure in -mm when Andrew does next -mm.

ao> Sam, this was merged into Linus' tree post v2.6.16 (like you ao> intended), but, won't the window between now and 2.6.17 be a ao> little too big for such a fix? Debian etch (and sid) already ships ao> with the affected make version:

ao> $ make -v | head -1
ao> GNU Make 3.81rc1

I reverted this fix in GNU make 3.81rc2 (available for a bit over a week now). 3.81 final will ship with the old, buggy behavior instead of the fixed behavior.

Immediately post-3.81 I'll re-introduce the GNU make fix.

Note that this only impacts people who build the kernel multiple times without cleaning the tree. While this is very common with newer versions of the kernel (for developers) it's probably less common with older versions, and many of those (distro-based) can apply this kbuild patch with the rest of their distro-specific patches.

On the gripping hand, it's quite possible to provide a significantly smaller, targeted patch that fixes just the most egregious problem with only two lines changed, if the -stable team was interested in that instead.

Signature · 4 lines
-------------------------------------------------------------------------------
 Paul D. Smith <[email protected]>          Find some GNU make tips at:
 http://www.gnu.org                      http://make.paulandlesley.org
 "Please remain calm...I may be mad, but I am a professional." --Mad Scientist
#8 lore raw
Quoted 5 lines · Paul D. Smith

On the gripping hand, it's quite possible to provide a significantly smaller, targeted patch that fixes just the most egregious problem with only two lines changed, if the -stable team was interested in that instead.

That sounds good, and if it solves problems for people, should be acceptable.

thanks,

greg k-h