PROBLEM: kernel BUG at mm/rmap.c:486 - kernel 2.6.15-r1
Subsystems (3)
I started getting hard lockups on my desktop PC with the error "kernel BUG at mm/rmap.c:487" starting with kernel 2.6.13 and continuing through 2.6.14. After switching to 2.6.15 the lockups have continued with the message "kernel BUG at mm/rmap.c:486".
The frequency and circumstance are completely random which originally had me suspecting bad memory but after running Memtest86+ for over 12 hours without error I'm at a loss.
I'm running the binary Nvidia driver so I'll understand if I can't get help here but in searching through the list archives it would seem I'm not alone and I am willing to try any patches that may help diagnose the issue. The crash happens at least daily and I've seen no difference in running kernels with or without PREEMPT enabled.
The machine is a P4 3.00GHz with 2048MB PC3200 Unbuffered RAM on an ASUS motherboard with an ICH5 chipset. XFX GF 6600GT video card, 600W power supply and plenty of cooling.
Below I've included output from ver_linux, syslog and lspci.
Thanks,
Ken
------------------------------------------------------------
### ver_linux output ###
------------------------------------------------------------
mm-home1 linux # sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux mm-home1 2.6.15-gentoo-r1 #4 SMP PREEMPT Wed Jan 25 16:50:47 MST 2006 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GenuineIntel GNU/Linux
Gnu C 3.3.6 Gnu make 3.80 binutils 2.16.1 util-linux 2.12r mount 2.12r module-init-tools 3.2.1 e2fsprogs 1.38 jfsutils 1.1.8 reiserfsprogs 3.6.19 reiser4progs line xfsprogs 2.6.25 PPP 2.4.2 Linux C Library 2.3.5 Dynamic linker (ldd) 2.3.5 Procps 3.2.5 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 udev 081 Modules Loaded ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack iptable_filter ip_tables snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_util_mem snd_hwdep eth1394 nls_utf8 rfcomm bnep l2cap bluetooth dv1394 video1394 raw1394 ohci1394 ieee1394 3c59x marvell loop nvidia ntfs rtc tsdev
------------------------------------------------------------
------------------------------------------------------------
### /var/log/messages output ###
------------------------------------------------------------
Jan 26 00:26:09 mm-home1 ------------[ cut here ]------------ Jan 26 00:26:09 mm-home1 kernel BUG at mm/rmap.c:486! Jan 26 00:26:09 mm-home1 invalid operand: 0000 [#1] Jan 26 00:26:09 mm-home1 PREEMPT SMP Jan 26 00:26:09 mm-home1 Modules linked in: ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack iptable_filter ip_tables snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_util_mem snd_hwdep eth1394 nls_utf8 rfcomm bnep l2cap bluetooth dv1394 video1394 raw1394 ohci1394 ieee1394 3c59x marvell loop nvidia ntfs rtc tsdev Jan 26 00:26:09 mm-home1 CPU: 0 Jan 26 00:26:09 mm-home1 EIP: 0060:[<c0147c05>] Tainted: P VLI Jan 26 00:26:09 mm-home1 EFLAGS: 00010286 (2.6.15-gentoo-r1) Jan 26 00:26:09 mm-home1 EIP is at page_remove_rmap+0x16/0x2a Jan 26 00:26:09 mm-home1 eax: ffffffff ebx: c1c4c404 ecx: 00000038 edx: c1c4c404 Jan 26 00:26:09 mm-home1 esi: 00000020 edi: fffb5c4c ebp: b7713000 esp: c5cfbdc4 Jan 26 00:26:09 mm-home1 ds: 007b es: 007b ss: 0068 Jan 26 00:26:09 mm-home1 Process thunderbird-bin (pid: 15527, threadinfo=c5cfa000 task=cd69d030) Jan 26 00:26:09 mm-home1 Stack: c0142203 c1c4c404 c1c18348 00000000 fffffffe f7016180 b7780000 cd69fb74 Jan 26 00:26:09 mm-home1 00000000 cd69fb74 c014238c c220e900 c67a664c cd69fb74 b7712000 b7780000 Jan 26 00:26:09 mm-home1 c5cfbe48 00000000 b7780000 cd69fb74 00000001 c67a664c b7712000 b7780000 Jan 26 00:26:09 mm-home1 Call Trace: Jan 26 00:26:09 mm-home1 [<c0142203>] zap_pte_range+0x166/0x250 Jan 26 00:26:09 mm-home1 [<c014238c>] unmap_page_range+0x9f/0xed Jan 26 00:26:09 mm-home1 [<c01424c4>] unmap_vmas+0xea/0x1f1 Jan 26 00:26:09 mm-home1 [<c0146376>] exit_mmap+0x6c/0xff Jan 26 00:26:09 mm-home1 [<c0116add>] mmput+0x21/0x7a Jan 26 00:26:09 mm-home1 [<c011ae5a>] do_exit+0x174/0x379 Jan 26 00:26:09 mm-home1 [<c011b120>] sys_exit_group+0x0/0x11 Jan 26 00:26:09 mm-home1 [<c0122c2f>] get_signal_to_deliver+0x2b0/0x2d8 Jan 26 00:26:09 mm-home1 [<c01026dd>] do_signal+0x50/0xc2 Jan 26 00:26:09 mm-home1 [<c012007b>] del_timer+0x9/0x4b Jan 26 00:26:09 mm-home1 [<c015b291>] pipe_poll+0x1a/0x8e Jan 26 00:26:09 mm-home1 [<c01395cb>] free_hot_cold_page+0x7a/0x10b Jan 26 00:26:09 mm-home1 [<c016073c>] poll_freewait+0x37/0x3e Jan 26 00:26:09 mm-home1 [<c0161224>] sys_poll+0x1dd/0x1e9 Jan 26 00:26:09 mm-home1 [<c0160743>] __pollwait+0x0/0x9b Jan 26 00:26:09 mm-home1 [<c0102777>] do_notify_resume+0x28/0x39 Jan 26 00:26:09 mm-home1 [<c0102942>] work_notifysig+0x13/0x19 Jan 26 00:26:09 mm-home1 kdm[14992]: X server for display :0 terminated unexpectedly Jan 26 00:26:09 mm-home1 Code: 42 08 0f 94 c0 84 c0 74 0b 6a 01 6a 10 e8 14 23 ff ff 58 5a c3 8b 54 24 04 f0 83 42 08 ff 0f 98 c0 84 c0 74 19 8b 42 08 40 79 08 <0f> 0b e6 01 12 82 3e c0 6a ff 6a 10 e8 ea 22 ff ff 59 58 c3 55 Jan 26 00:26:09 mm-home1 <1>Fixing recursive fault but reboot is needed! Jan 26 00:26:09 mm-home1 scheduling while atomic: thunderbird-bin/0x00000003/15527 Jan 26 00:26:09 mm-home1 [<c03bbb17>] schedule+0x43/0xac0 Jan 26 00:26:09 mm-home1 [<c0119174>] vprintk+0x1f8/0x232 Jan 26 00:26:09 mm-home1 [<c01035eb>] show_trace+0x1e/0x6e Jan 26 00:26:09 mm-home1 [<c0147c19>] try_to_unmap_one+0x0/0x18c Jan 26 00:26:09 mm-home1 [<c011ad95>] do_exit+0xaf/0x379 Jan 26 00:26:09 mm-home1 [<c01039fc>] do_trap+0x0/0xc1 Jan 26 00:26:09 mm-home1 [<c0103c5d>] do_invalid_op+0x0/0x86 Jan 26 00:26:09 mm-home1 [<c0103cd7>] do_invalid_op+0x7a/0x86 Jan 26 00:26:09 mm-home1 [<c01203ef>] update_wall_time+0xa/0x32 Jan 26 00:26:09 mm-home1 [<c01206bb>] do_timer+0x2e/0xa3 Jan 26 00:26:09 mm-home1 [<c0147c05>] page_remove_rmap+0x16/0x2a Jan 26 00:26:09 mm-home1 [<c0134af7>] handle_IRQ_event+0x20/0x4c Jan 26 00:26:09 mm-home1 [<c0134bcc>] __do_IRQ+0xa9/0xdd Jan 26 00:26:09 mm-home1 [<c0134bf2>] __do_IRQ+0xcf/0xdd Jan 26 00:26:09 mm-home1 [<c010486a>] do_IRQ+0x1e/0x24 Jan 26 00:26:09 mm-home1 [<c010327e>] common_interrupt+0x1a/0x20 Jan 26 00:26:09 mm-home1 [<c013007b>] search_module_extables+0x86/0x87 Jan 26 00:26:09 mm-home1 [<c01033d7>] error_code+0x4f/0x54 Jan 26 00:26:09 mm-home1 [<c013007b>] search_module_extables+0x86/0x87 Jan 26 00:26:09 mm-home1 [<c0147c05>] page_remove_rmap+0x16/0x2a Jan 26 00:26:09 mm-home1 [<c0142203>] zap_pte_range+0x166/0x250 Jan 26 00:26:09 mm-home1 [<c014238c>] unmap_page_range+0x9f/0xed Jan 26 00:26:09 mm-home1 [<c01424c4>] unmap_vmas+0xea/0x1f1 Jan 26 00:26:09 mm-home1 [<c0146376>] exit_mmap+0x6c/0xff Jan 26 00:26:09 mm-home1 [<c0116add>] mmput+0x21/0x7a Jan 26 00:26:09 mm-home1 [<c011ae5a>] do_exit+0x174/0x379 Jan 26 00:26:09 mm-home1 [<c011b120>] sys_exit_group+0x0/0x11 Jan 26 00:26:09 mm-home1 [<c0122c2f>] get_signal_to_deliver+0x2b0/0x2d8 Jan 26 00:26:09 mm-home1 [<c01026dd>] do_signal+0x50/0xc2 Jan 26 00:26:09 mm-home1 [<c012007b>] del_timer+0x9/0x4b Jan 26 00:26:09 mm-home1 [<c015b291>] pipe_poll+0x1a/0x8e Jan 26 00:26:09 mm-home1 [<c01395cb>] free_hot_cold_page+0x7a/0x10b Jan 26 00:26:09 mm-home1 [<c016073c>] poll_freewait+0x37/0x3e Jan 26 00:26:09 mm-home1 [<c0161224>] sys_poll+0x1dd/0x1e9 Jan 26 00:26:09 mm-home1 [<c0160743>] __pollwait+0x0/0x9b Jan 26 00:26:09 mm-home1 [<c0102777>] do_notify_resume+0x28/0x39 Jan 26 00:26:09 mm-home1 [<c0102942>] work_notifysig+0x13/0x19 Jan 26 00:26:09 mm-home1 kde(pam_unix)[14996]: session closed for user krm Jan 26 00:26:09 mm-home1 Unable to handle kernel NULL pointer dereference at virtual address 00000020 Jan 26 00:26:09 mm-home1 printing eip: Jan 26 00:26:09 mm-home1 c025c4ef Jan 26 00:26:09 mm-home1 *pde = 00000000 Jan 26 00:26:09 mm-home1 Oops: 0000 [#2] Jan 26 00:26:09 mm-home1 PREEMPT SMP Jan 26 00:26:09 mm-home1 Modules linked in: ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack iptable_filter ip_tables snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_util_mem snd_hwdep eth1394 nls_utf8 rfcomm bnep l2cap bluetooth dv1394 video1394 raw1394 ohci1394 ieee1394 3c59x marvell loop nvidia ntfs rtc tsdev Jan 26 00:26:09 mm-home1 CPU: 1 Jan 26 00:26:09 mm-home1 EIP: 0060:[<c025c4ef>] Tainted: P VLI Jan 26 00:26:09 mm-home1 EFLAGS: 00010297 (2.6.15-gentoo-r1) Jan 26 00:26:09 mm-home1 EIP is at get_index+0x1b/0x3b Jan 26 00:26:09 mm-home1 eax: cdd231e4 ebx: ce94bdf4 ecx: ce94bdf0 edx: ffffffd8 Jan 26 00:26:09 mm-home1 esi: f71bdcfc edi: ce94bdf0 ebp: cdd231e4 esp: ce94bdd4 Jan 26 00:26:09 mm-home1 ds: 007b es: 007b ss: 0068 Jan 26 00:26:09 mm-home1 Process artsd (pid: 15963, threadinfo=ce94a000 task=f71df550) Jan 26 00:26:09 mm-home1 Stack: c6625c4c c025c7da cdd231e4 00000000 ce94bdf0 ce94bdf4 c0141aa8 c6d32eac Jan 26 00:26:09 mm-home1 c6d72d46 cdd231c8 cdd231f4 c237ec80 f71bdcd4 c0144919 cdd231e4 f71bdcfc Jan 26 00:26:09 mm-home1 cdd231c8 f71bdcd4 f7b6af3c b3b00000 00000000 c0141b73 f71bdcd4 f71bdcd4 Jan 26 00:26:09 mm-home1 Call Trace: Jan 26 00:26:09 mm-home1 [<c025c7da>] prio_tree_remove+0x30/0xaf Jan 26 00:26:09 mm-home1 [<c0141aa8>] free_pgd_range+0xc5/0x14a Jan 26 00:26:09 mm-home1 [<c0144919>] unlink_file_vma+0x27/0x3a Jan 26 00:26:09 mm-home1 [<c0141b73>] free_pgtables+0x46/0x84 Jan 26 00:26:09 mm-home1 [<c0146395>] exit_mmap+0x8b/0xff Jan 26 00:26:09 mm-home1 [<c0116add>] mmput+0x21/0x7a Jan 26 00:26:09 mm-home1 [<c0159498>] exec_mmap+0x19d/0x1bb Jan 26 00:26:09 mm-home1 [<c0159a74>] flush_old_exec+0x552/0x74d Jan 26 00:26:09 mm-home1 [<c01592f2>] kernel_read+0x38/0x41 Jan 26 00:26:09 mm-home1 [<c0177027>] load_elf_binary+0x4cd/0xb64 Jan 26 00:26:09 mm-home1 [<c0140ed7>] kunmap_high+0x13/0x80 Jan 26 00:26:09 mm-home1 [<c0140f27>] kunmap_high+0x63/0x80 Jan 26 00:26:09 mm-home1 [<c0158f70>] copy_strings+0x1e5/0x1f2 Jan 26 00:26:09 mm-home1 [<c0176b5a>] load_elf_binary+0x0/0xb64 Jan 26 00:26:09 mm-home1 [<c0159f07>] search_binary_handler+0xd6/0x269 Jan 26 00:26:09 mm-home1 [<c015a205>] do_execve+0x16b/0x207 Jan 26 00:26:09 mm-home1 [<c010170d>] sys_execve+0x2c/0x6d Jan 26 00:26:09 mm-home1 [<c01028b1>] syscall_call+0x7/0xb Jan 26 00:26:09 mm-home1 Code: ff d6 ba 01 00 00 00 58 5b 89 d0 5e c3 90 90 90 53 8b 44 24 08 8b 54 24 0c 8b 4c 24 10 66 83 78 06 00 8b 5c 24 14 74 17 83 ea 28 <8b> 42 48 89 01 8b 42 08 2b 42 04 c1 e8 0c 03 42 48 48 eb 08 8b Jan 26 00:26:09 mm-home1 <6>note: artsd[15963] exited with preempt_count 2 Jan 26 00:26:09 mm-home1 Unable to handle kernel paging request at virtual address 005d7533 Jan 26 00:26:09 mm-home1 printing eip: Jan 26 00:26:09 mm-home1 c01407f2 Jan 26 00:26:09 mm-home1 *pde = 00000000 Jan 26 00:26:09 mm-home1 Oops: 0002 [#3] Jan 26 00:26:09 mm-home1 PREEMPT SMP Jan 26 00:26:09 mm-home1 Modules linked in: ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack iptable_filter ip_tables snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_util_mem snd_hwdep eth1394 nls_utf8 rfcomm bnep l2cap bluetooth dv1394 video1394 raw1394 ohci1394 ieee1394 3c59x marvell loop nvidia ntfs rtc tsdev Jan 26 00:26:09 mm-home1 CPU: 0 Jan 26 00:26:09 mm-home1 EIP: 0060:[<c01407f2>] Tainted: P VLI Jan 26 00:26:09 mm-home1 EFLAGS: 00210207 (2.6.15-gentoo-r1) Jan 26 00:26:09 mm-home1 EIP is at vma_prio_tree_remove+0x68/0xbf Jan 26 00:26:09 mm-home1 eax: c6f57b44 ebx: 005d7507 ecx: f700b514 edx: 005d752f Jan 26 00:26:09 mm-home1 esi: c70be4ec edi: f700b4ec ebp: ce911e78 esp: ce943f04 Jan 26 00:26:09 mm-home1 ds: 007b es: 007b ss: 0068 Jan 26 00:26:09 mm-home1 Process kicker (pid: 15118, threadinfo=ce942000 task=f7096030) Jan 26 00:26:09 mm-home1 Stack: ce911e5c ce911e88 f3d0f480 c70be4ec c0144919 c70be4ec ce911e78 ce911e5c Jan 26 00:26:09 mm-home1 c70be4ec c70be494 b63fe000 00000000 c0141b73 c70be4ec c70be4ec ce943f64 Jan 26 00:26:09 mm-home1 c6d7c9bc f7045300 00000100 c0146395 ce943f64 c6d7c9bc 00000000 00000000 Jan 26 00:26:09 mm-home1 Call Trace: Jan 26 00:26:09 mm-home1 [<c0144919>] unlink_file_vma+0x27/0x3a Jan 26 00:26:09 mm-home1 [<c0141b73>] free_pgtables+0x46/0x84 Jan 26 00:26:09 mm-home1 [<c0146395>] exit_mmap+0x8b/0xff Jan 26 00:26:09 mm-home1 [<c0116add>] mmput+0x21/0x7a Jan 26 00:26:09 mm-home1 [<c011ae5a>] do_exit+0x174/0x379 Jan 26 00:26:09 mm-home1 [<c011b120>] sys_exit_group+0x0/0x11 Jan 26 00:26:09 mm-home1 [<c01028b1>] syscall_call+0x7/0xb Jan 26 00:26:09 mm-home1 Code: 5d e9 dd bf 11 00 39 77 34 74 08 0f 0b 7d 00 a5 81 3e c0 83 7e 30 00 74 3a 8d 4f 28 8b 57 28 31 db 39 ca 74 11 8b 41 04 8d 5a d8 <89> 42 04 89 10 89 49 04 89 4f 28 8d 47 28 50 8d 46 28 50 55 e8 Jan 26 00:26:09 mm-home1 <1>Fixing recursive fault but reboot is needed! Jan 26 00:26:09 mm-home1 scheduling while atomic: kicker/0x00000002/15118 Jan 26 00:26:09 mm-home1 [<c03bbb17>] schedule+0x43/0xac0 Jan 26 00:26:09 mm-home1 [<c0119174>] vprintk+0x1f8/0x232 Jan 26 00:26:09 mm-home1 [<c01035eb>] show_trace+0x1e/0x6e Jan 26 00:26:09 mm-home1 [<c0140806>] vma_prio_tree_remove+0x7c/0xbf Jan 26 00:26:09 mm-home1 [<c011ad95>] do_exit+0xaf/0x379 Jan 26 00:26:09 mm-home1 [<c01039fc>] do_trap+0x0/0xc1 Jan 26 00:26:09 mm-home1 [<c0111ecf>] do_page_fault+0x377/0x4a9 Jan 26 00:26:09 mm-home1 [<c0111b58>] do_page_fault+0x0/0x4a9 Jan 26 00:26:09 mm-home1 [<c01033d7>] error_code+0x4f/0x54 Jan 26 00:26:09 mm-home1 [<c01407f2>] vma_prio_tree_remove+0x68/0xbf Jan 26 00:26:09 mm-home1 [<c0144919>] unlink_file_vma+0x27/0x3a Jan 26 00:26:09 mm-home1 [<c0141b73>] free_pgtables+0x46/0x84 Jan 26 00:26:09 mm-home1 [<c0146395>] exit_mmap+0x8b/0xff Jan 26 00:26:09 mm-home1 [<c0116add>] mmput+0x21/0x7a Jan 26 00:26:09 mm-home1 [<c011ae5a>] do_exit+0x174/0x379 Jan 26 00:26:09 mm-home1 [<c011b120>] sys_exit_group+0x0/0x11 Jan 26 00:26:09 mm-home1 [<c01028b1>] syscall_call+0x7/0xb Jan 26 00:26:11 mm-home1 kdm[14992]: X server for display :0 terminated unexpectedly Jan 26 00:26:11 mm-home1 kdm[14992]: Unable to fire up local display :0; disabling.
------------------------------------------------------------
------------------------------------------------------------
### lspci -vv output ###
------------------------------------------------------------
mm-home1 linux # lspci -vv
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit-
FW+ Rate=x8
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fa900000-fe9fffff
Prefetchable memory behind bridge: bff00000-dfefffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at eec0 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at ef00 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 17
Region 4: I/O ports at ef20 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at ef40 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 18
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mAPME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 88000000-880fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 88100000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 0400 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2) (prog-if 00 [VGA])
Subsystem: XFX Pine Group Inc. Unknown device 2165
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 2: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit-
FW+ Rate=x8
02:05.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit
Ethernet Controller (Asus)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size 04
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Expansion ROM at 88000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
02:0a.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) (prog-if 10 [OHCI])
Subsystem: Accton Technology Corporation Unknown device 1394
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size 04
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feafb800 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at feaf4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mAPME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
Subsystem: Creative Labs Unknown device 8066
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at df80 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at dff0 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0c.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size 04
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at dc00 [size=128]
Region 1: Memory at feafb400 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 88020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
------------------------------------------------------------
### END ###
------------------------------------------------------------
Quoted 4 lines · Ken MacFerrin
I started getting hard lockups on my desktop PC with the error "kernel BUG at
mm/rmap.c:487" starting with kernel 2.6.13 and continuing through 2.6.14. After switching to 2.6.15 the lockups have continued with the message "kernel BUG atmm/rmap.c:486".
That's progress, we're hoping to get it to vanish at line 0 eventually ;)
Quoted 10 lines
The frequency and circumstance are completely random which originally had me suspecting bad memory but after running Memtest86+ for over 12 hours without error I'm at a loss.
I'm running the binary Nvidia driver so I'll understand if I can't get help here but in searching through the list archives it would seem I'm not alone and I am willing to try any patches that may help diagnose the issue. The crash happens at least daily and I've seen no difference in running kernels with or without PREEMPT enabled.
Quoted 3 lines
The machine is a P4 3.00GHz with 2048MB PC3200 Unbuffered RAM on an ASUS motherboard with an ICH5 chipset. XFX GF 6600GT video card, 600W power supply and plenty of cooling.
You raise several worthwhile points there, I needn't repeat them back to you.
Here's the 2.6.15 version of the patch I traditionally send out for this (smaller than for earlier releases because of several advances in 2.6.15).
Please apply and let me know of all "Bad page state" and "Bad rmap" messages you get. Our record at nailing these problems is not good, but the patch should at least let you go on running for much longer.
Thanks,
Hugh
include/linux/rmap.h +1 -1
@@ -72,7 +72,7 @@ void __anon_vma_link(struct vm_area_stru*/ void page_add_anon_rmap (struct page *,struct vm_area_struct *,unsigned long );void page_add_file_rmap (struct page *); -void page_remove_rmap (struct page *); +void page_remove_rmap (struct page *,struct vm_area_struct *,unsigned long );/** * page_dup_rmap - duplicate pte mapping to a page
mm/filemap_xip.c +1 -1
@@ -189,7 +189,7 @@ __xip_unmap (struct address_space * mapp/* Nuke the page table entry. */ flush_cache_page (vma, address,pte_pfn (*pte)); pteval =ptep_clear_flush (vma, address, pte); -page_remove_rmap (page); +page_remove_rmap (page, vma, address);dec_mm_counter (mm, file_rss);BUG_ON (pte_dirty (pteval));pte_unmap_unlock (pte, ptl);
mm/fremap.c +1 -1
@@ -33,7 +33,7 @@ static int zap_pte(struct mm_struct *mm,if (page) {if (pte_dirty (pte))set_page_dirty (page); -page_remove_rmap (page); +page_remove_rmap (page, vma, addr);page_cache_release (page); } }else {
mm/memory.c +2 -2
@@ -656,7 +656,7 @@ static unsigned long zap_pte_range(strucmark_page_accessed (page); file_rss--; } -page_remove_rmap (page); +page_remove_rmap (page, vma, addr);tlb_remove_page (tlb, page);continue ; }
@@ -1484,7 +1484,7 @@ gotten: page_table =pte_offset_map_lock (mm, pmd, address, &ptl);if (likely (pte_same (*page_table, orig_pte))) {if (old_page) { -page_remove_rmap (old_page); +page_remove_rmap (old_page, vma, address);if (!PageAnon (old_page)) {dec_mm_counter (mm, file_rss);inc_mm_counter (mm, anon_rss);
mm/rmap.c +34 -4
@@ -480,10 +480,40 @@ void page_add_file_rmap(struct page *pag* * The caller needs to hold the pte lock. */ -void page_remove_rmap (struct page *page) +void page_remove_rmap (struct page *page, +struct vm_area_struct *vma,unsigned long address) { +struct address_space *mapping =NULL ; +unsigned long index; + + index = (address - vma->vm_start) >>PAGE_SHIFT ; + index += vma->vm_pgoff; + +if (PageAnon (page)) + mapping = (void *) vma->anon_vma +PAGE_MAPPING_ANON ; +else if (page->mapping) + mapping = vma->vm_file? vma->vm_file->f_mapping: (void *)(-1 ); + +if (page_mapcount (page) <=0 ||page_count (page) <=0 || + (mapping && (mapping != page->mapping || index != page->index))) { +pgd_t *pgd =pgd_offset (vma->vm_mm, address); +pud_t *pud =pud_offset (pgd, address); +pmd_t *pmd =pmd_offset (pud, address); +unsigned long ptpfn =pmd_val (*pmd) >>PAGE_SHIFT ; + +printk (KERN_ERR "Bad rmap: " +"page %p flags %lx count %d mapcount %d\n" , + page, page->flags, +page_count (page),page_mapcount (page)); +printk (KERN_ERR " %s addr %lx ptpfn %lx vm_flags %lx\n" , + current->comm, address, ptpfn, vma->vm_flags); +printk (KERN_ERR " page mapping %p %lx vma mapping %p %lx\n" , + page->mapping, page->index, mapping, index); +get_page (page);/* corrupt, so leak rather than free it */ +return ; + } +if (atomic_add_negative (-1 , &page->_mapcount)) { -BUG_ON (page_mapcount (page) <0 );/* * It would be tidy to reset the PageAnon mapping here, * but that might overwrite a racing page_add_anon_rmap
@@ -562,7 +592,7 @@ static int try_to_unmap_one(struct page }else dec_mm_counter (mm, file_rss); -page_remove_rmap (page); +page_remove_rmap (page, vma, address);page_cache_release (page); out_unmap:
@@ -652,7 +682,7 @@ static void try_to_unmap_cluster(unsigneif (pte_dirty (pteval))set_page_dirty (page); -page_remove_rmap (page); +page_remove_rmap (page, vma, address);page_cache_release (page);dec_mm_counter (mm, file_rss); (*mapcount)--;
Quoted 31 lines · Hugh Dickins
Quoted 4 lines · Ken MacFerrin
I started getting hard lockups on my desktop PC with the error "kernel BUG at
mm/rmap.c:487" starting with kernel 2.6.13 and continuing through 2.6.14. After switching to 2.6.15 the lockups have continued with the message "kernel BUG atmm/rmap.c:486".That's progress, we're hoping to get it to vanish at line 0 eventually ;)
Quoted 10 lines
The frequency and circumstance are completely random which originally had me suspecting bad memory but after running Memtest86+ for over 12 hours without error I'm at a loss.
I'm running the binary Nvidia driver so I'll understand if I can't get help here but in searching through the list archives it would seem I'm not alone and I am willing to try any patches that may help diagnose the issue. The crash happens at least daily and I've seen no difference in running kernels with or without PREEMPT enabled.
Quoted 3 lines
The machine is a P4 3.00GHz with 2048MB PC3200 Unbuffered RAM on an ASUS motherboard with an ICH5 chipset. XFX GF 6600GT video card, 600W power supply and plenty of cooling.
You raise several worthwhile points there, I needn't repeat them back to you.
Here's the 2.6.15 version of the patch I traditionally send out for this (smaller than for earlier releases because of several advances in 2.6.15).
Quoted 6 lines
Please apply and let me know of all "Bad page state" and "Bad rmap" messages you get. Our record at nailing these problems is not good, but the patch should at least let you go on running for much longer.
Thanks,
Hugh
Well, unfortunately I'm back again. I applied your patch last night but had another crash again today. My X session crashed and dropped me into the console, which then froze, requiring a hard reboot. I was only able to capture the output below because of remote logging. This time I did not get the specific "BUG at mm/rmap.c" message I had in my previous report but do have some "Bad rmap..." messages as you can see below.
Again, I'm happy to test any patches or suggestions for isolating the problem.
Thanks,
Ken
-------------------------------------
### /var/log/messages output ###
-------------------------------------
Feb 1 17:01:01 mm-home1 cron[31322]: (root) CMD (/usr/bin/updatedb) Feb 1 17:04:13 mm-home1 __find_get_block_slow() failed. block=1410, b_blocknr=71213169107797378 Feb 1 17:04:13 mm-home1 b_state=0x00000029, b_size=4096 Feb 1 17:04:13 mm-home1 device blocksize: 4096 Feb 1 17:04:13 mm-home1 Unable to handle kernel NULL pointer dereference at virtual address 00000000 Feb 1 17:04:13 mm-home1 printing eip: Feb 1 17:04:13 mm-home1 c019fe9b Feb 1 17:04:13 mm-home1 *pde = 00000000 Feb 1 17:04:13 mm-home1 Oops: 0000 [#1] Feb 1 17:04:13 mm-home1 PREEMPT SMP Feb 1 17:04:13 mm-home1 Modules linked in: ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack iptable_filter ip_tables snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_util_mem snd_hwdep eth1394 nls_utf8 rfcomm bnep l2cap bluetooth dv1394 video1394 raw1394 ohci1394 ieee1394 3c59x marvell loop nvidia ntfs rtc tsdev Feb 1 17:04:13 mm-home1 CPU: 0 Feb 1 17:04:13 mm-home1 EIP: 0060:[<c019fe9b>] Tainted: P VLI Feb 1 17:04:13 mm-home1 EFLAGS: 00210282 (2.6.15-gentoo-r1) Feb 1 17:04:13 mm-home1 EIP is at flush_commit_list+0x229/0x3ef Feb 1 17:04:13 mm-home1 eax: 00000000 ebx: f8825000 ecx: c15274cc edx: 00000000 Feb 1 17:04:13 mm-home1 esi: e227ae00 edi: f8825000 ebp: 0000000d esp: f7e11e1c Feb 1 17:04:13 mm-home1 ds: 007b es: 007b ss: 0068 Feb 1 17:04:13 mm-home1 Process pdflush (pid: 164, threadinfo=f7e10000 task=f7c15030) Feb 1 17:04:13 mm-home1 Stack: f781e000 f7856c00 f781e000 f7856c00 00000000 00000000 00000000 00000000 Feb 1 17:04:13 mm-home1 ead379c8 00002000 f8825000 c01a3e62 f784f800 e227ae00 00000001 00002032 Feb 1 17:04:13 mm-home1 00000000 c17d4f18 f7856c00 f7a97f0c 000003fa 0011fcb3 00000046 e227ae00 Feb 1 17:04:13 mm-home1 Call Trace: Feb 1 17:04:13 mm-home1 [<c01a3e62>] do_journal_end+0x880/0x8b6 Feb 1 17:04:13 mm-home1 [<c013b7ee>] pdflush+0x0/0x32 Feb 1 17:04:13 mm-home1 [<c01a2e46>] journal_end_sync+0x61/0x67 Feb 1 17:04:13 mm-home1 [<c0194276>] reiserfs_sync_fs+0x31/0x56 Feb 1 17:04:13 mm-home1 [<c01942a6>] reiserfs_write_super+0xb/0xe Feb 1 17:04:13 mm-home1 [<c0155e3a>] sync_supers+0x79/0xdc Feb 1 17:04:13 mm-home1 [<c013b018>] wb_kupdate+0x21/0xe2 Feb 1 17:04:13 mm-home1 [<c013b759>] __pdflush+0xe9/0x17e Feb 1 17:04:13 mm-home1 [<c013b81b>] pdflush+0x2d/0x32 Feb 1 17:04:13 mm-home1 [<c013aff7>] wb_kupdate+0x0/0xe2 Feb 1 17:04:13 mm-home1 [<c0129a6f>] kthread+0x7c/0xa6 Feb 1 17:04:13 mm-home1 [<c01299f3>] kthread+0x0/0xa6 Feb 1 17:04:13 mm-home1 [<c0100ef5>] kernel_thread_helper+0x5/0xb Feb 1 17:04:13 mm-home1 Code: 73 14 8b 44 24 04 89 d1 8b 54 24 30 03 4b 0c 8b 58 0c ff 72 0c 89 c8 99 52 51 ff 73 10 e8 19 27 fb ff 89 44 24 28 89 c2 83 c4 10 <8b> 00 a8 04 75 07 8b 42 0c 85 c0 75 07 52 e8 db 14 fb ff 58 8b Feb 1 17:04:13 mm-home1 Badness in do_exit at kernel/exit.c:796 Feb 1 17:04:13 mm-home1 [<c011ad1e>] do_exit+0x38/0x379 Feb 1 17:04:13 mm-home1 [<c01039fc>] do_trap+0x0/0xc1 Feb 1 17:04:13 mm-home1 [<c0111ecf>] do_page_fault+0x377/0x4a9 Feb 1 17:04:13 mm-home1 [<c0118f79>] printk+0xe/0x11 Feb 1 17:04:13 mm-home1 [<c0111b58>] do_page_fault+0x0/0x4a9 Feb 1 17:04:13 mm-home1 [<c01033d7>] error_code+0x4f/0x54 Feb 1 17:04:13 mm-home1 [<c015007b>] wait_on_retry_sync_kiocb+0x6/0x38 Feb 1 17:04:13 mm-home1 [<c019fe9b>] flush_commit_list+0x229/0x3ef Feb 1 17:04:13 mm-home1 [<c01a3e62>] do_journal_end+0x880/0x8b6 Feb 1 17:04:13 mm-home1 [<c013b7ee>] pdflush+0x0/0x32 Feb 1 17:04:13 mm-home1 [<c01a2e46>] journal_end_sync+0x61/0x67 Feb 1 17:04:13 mm-home1 [<c0194276>] reiserfs_sync_fs+0x31/0x56 Feb 1 17:04:13 mm-home1 [<c01942a6>] reiserfs_write_super+0xb/0xe Feb 1 17:04:13 mm-home1 [<c0155e3a>] sync_supers+0x79/0xdc Feb 1 17:04:13 mm-home1 [<c013b018>] wb_kupdate+0x21/0xe2 Feb 1 17:04:13 mm-home1 [<c013b759>] __pdflush+0xe9/0x17e Feb 1 17:04:13 mm-home1 [<c013b81b>] pdflush+0x2d/0x32 Feb 1 17:04:13 mm-home1 [<c013aff7>] wb_kupdate+0x0/0xe2 Feb 1 17:04:13 mm-home1 [<c0129a6f>] kthread+0x7c/0xa6 Feb 1 17:04:13 mm-home1 [<c01299f3>] kthread+0x0/0xa6 Feb 1 17:04:13 mm-home1 [<c0100ef5>] kernel_thread_helper+0x5/0xb Feb 1 17:04:14 mm-home1 kdm[10322]: X server for display :0 terminated unexpectedly Feb 1 17:04:14 mm-home1 su(pam_unix)[11478]: session closed for user root Feb 1 17:04:14 mm-home1 Bad rmap: page c1ee7ee0 flags c0000014 count 1 mapcount 0 Feb 1 17:04:14 mm-home1 firefox-bin addr b5313000 ptpfn 69515 vm_flags 100077 Feb 1 17:04:14 mm-home1 page mapping 00000000 95d4 vma mapping 00000000 b5313 Feb 1 17:04:14 mm-home1 kde(pam_unix)[10326]: session closed for user krm Feb 1 17:04:19 mm-home1 Unable to handle kernel paging request at virtual address 00180000 Feb 1 17:04:19 mm-home1 printing eip: Feb 1 17:04:19 mm-home1 c0135fa7 Feb 1 17:04:19 mm-home1 *pde = 00000000 Feb 1 17:04:19 mm-home1 Oops: 0000 [#2] Feb 1 17:04:19 mm-home1 PREEMPT SMP Feb 1 17:04:19 mm-home1 Modules linked in: ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack iptable_filter ip_tables snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_util_mem snd_hwdep eth1394 nls_utf8 rfcomm bnep l2cap bluetooth dv1394 video1394 raw1394 ohci1394 ieee1394 3c59x marvell loop nvidia ntfs rtc tsdev Feb 1 17:04:19 mm-home1 CPU: 1 Feb 1 17:04:19 mm-home1 EIP: 0060:[<c0135fa7>] Tainted: P VLI Feb 1 17:04:19 mm-home1 EFLAGS: 00210097 (2.6.15-gentoo-r1) Feb 1 17:04:19 mm-home1 EIP is at find_get_pages+0x33/0x54 Feb 1 17:04:19 mm-home1 eax: c000086c ebx: 00000002 ecx: 00000001 edx: 00180000 Feb 1 17:04:19 mm-home1 esi: f59908f8 edi: f7d8fe58 ebp: 00000000 esp: f7d8fe18 Feb 1 17:04:19 mm-home1 ds: 007b es: 007b ss: 0068 Feb 1 17:04:19 mm-home1 Process kswapd0 (pid: 165, threadinfo=f7d8e000 task=c23b5550) Feb 1 17:04:19 mm-home1 Stack: f7d8fe50 00000000 00000031 c013e91f f59908f8 00000000 0000000e f7d8fe58 Feb 1 17:04:19 mm-home1 f5990840 c013ed61 f7d8fe50 f59908f8 00000000 0000000e 00000000 00000000 Feb 1 17:04:19 mm-home1 c21f51c4 00180000 c04c8328 00200046 f65783e8 f65783f0 0000001e 00200046 Feb 1 17:04:19 mm-home1 Call Trace: Feb 1 17:04:19 mm-home1 [<c013e91f>] pagevec_lookup+0x1a/0x21 Feb 1 17:04:19 mm-home1 [<c013ed61>] invalidate_mapping_pages+0xa0/0xb5 Feb 1 17:04:19 mm-home1 [<c011cf66>] irq_exit+0x32/0x3d Feb 1 17:04:19 mm-home1 [<c010330c>] apic_timer_interrupt+0x1c/0x24 Feb 1 17:04:19 mm-home1 [<c013ed83>] invalidate_inode_pages+0xd/0x11 Feb 1 17:04:19 mm-home1 [<c016630d>] prune_icache+0xca/0x17f Feb 1 17:04:19 mm-home1 [<c01663da>] shrink_icache_memory+0x18/0x30 Feb 1 17:04:19 mm-home1 [<c013f150>] shrink_slab+0x13a/0x1a7 Feb 1 17:04:19 mm-home1 [<c0140285>] balance_pgdat+0x20a/0x320 Feb 1 17:04:19 mm-home1 [<c03bc665>] schedule+0xa59/0xac0 Feb 1 17:04:19 mm-home1 [<c0140493>] kswapd+0xf8/0xfd Feb 1 17:04:19 mm-home1 [<c0129e42>] autoremove_wake_function+0x0/0x3a Feb 1 17:04:19 mm-home1 [<c010278e>] ret_from_fork+0x6/0x14 Feb 1 17:04:19 mm-home1 [<c0129e42>] autoremove_wake_function+0x0/0x3a Feb 1 17:04:19 mm-home1 [<c014039b>] kswapd+0x0/0xfd Feb 1 17:04:19 mm-home1 [<c0100ef5>] kernel_thread_helper+0x5/0xb Feb 1 17:04:19 mm-home1 Code: 7c 24 1c 8d 46 10 e8 e3 78 28 00 8d 46 04 ff 74 24 18 ff 74 24 18 57 50 e8 80 71 12 00 31 c9 83 c4 10 89 c3 39 c1 73 16 8b 14 8f <8b> 02 f6 c4 40 74 03 8b 52 0c f0 ff 42 04 41 39 d9 72 ea 8d 46 Feb 1 17:04:19 mm-home1 <6>note: kswapd0[165] exited with preempt_count 1 Feb 1 17:04:19 mm-home1 (krm-11020): GConf server is not in use, shutting down. Feb 1 17:04:21 mm-home1 kdm: :0[15897]: Abnormal termination of greeter for display :0, code 127, signal 0 Feb 1 17:04:29 mm-home1 login(pam_unix)[10286]: session opened for user root by LOGIN(uid=0) Feb 1 17:06:45 mm-home1 __find_get_block_slow() failed. block=1681, b_blocknr=23362423066986129 Feb 1 17:06:45 mm-home1 b_state=0x00000029, b_size=4096
-----------------------------
### EOF ###
Quoted 6 lines · Ken MacFerrin
Well, unfortunately I'm back again. I applied your patch last night but had another crash again today. My X session crashed and dropped me into the console, which then froze, requiring a hard reboot. I was only able to capture the output below because of remote logging. This time I did not get the specific "BUG at
mm/rmap.c" message I had in my previous report
Yes, that's replaced by "Bad rmap..." by my patch.
Quoted 1 line
but do have some "Bad rmap..." messages as you can see below.
Which in many cases allow the system to continue undisturbed; but unfortunately not in your case, which is in a nastier state. And only one "Bad rmap...", so not a lot I could glean from it.
Quoted 1 line
Feb 1 17:01:01 mm-home1 cron[31322]: (root) CMD (/usr/bin/updatedb)
Okay, so plenty of disk and cache activity then. Were you doing anything interesting at the graphics end?
Quoted 2 lines
Feb 1 17:04:13 mm-home1 __find_get_block_slow() failed. block=1410,b_blocknr=71213169107797378
Or in hex, block=0x582 b_blocknr=0x00fd000000000582: something has corrupted the upper short of the bufheader's block number with 0xfd.
Quoted 5 lines
Feb 1 17:04:13 mm-home1 Unable to handle kernel NULL pointer dereference at virtual address 00000000 Feb 1 17:04:13 mm-home1 EIP is at flush_commit_list+0x229/0x3ef Feb 1 17:04:13 mm-home1 Process pdflush (pid: 164, threadinfo=f7e10000task=f7c15030)
And ReiserFS is justifiably surprised that no bufheader could be found for one of its journal pages.
Quoted 1 line
Feb 1 17:04:13 mm-home1 Badness in do_exit at kernel/exit.c:796
Concomitant fallout from the above fault.
Quoted 2 lines
Feb 1 17:04:14 mm-home1 kdm[10322]: X server for display :0 terminatedunexpectedly
Nothing to say why that was, but we already know the system is bad.
Quoted 4 lines
Feb 1 17:04:14 mm-home1 Bad rmap: page c1ee7ee0 flags c0000014 count 1 mapcount 0 Feb 1 17:04:14 mm-home1 firefox-bin addr b5313000 ptpfn 69515 vm_flags 100077 Feb 1 17:04:14 mm-home1 page mapping 00000000 95d4 vma mapping 00000000 b5313
A page is being unmapped which was not recorded as being mapped. Could be page table corruption. I'd been hoping for a sequence of these, and would then have looked for some commonality, but it's an isolated occurrence. Probably related to the bufheader corruption.
Quoted 4 lines
Feb 1 17:04:19 mm-home1 Unable to handle kernel paging request at virtual address 00180000 Feb 1 17:04:19 mm-home1 Process kswapd0 (pid: 165, threadinfo=f7d8e000 Feb 1 17:04:19 mm-home1 EIP is at find_get_pages+0x33/0x54
The radix-tree lookup found 0x00180000 where it should have found a struct page pointer or NULL: something has corrupted the upper short with 0x18.
Quoted 1 line
Feb 1 17:04:19 mm-home1 <6>note: kswapd0[165] exited with preempt_count 1
Concomitant fallout from the above fault.
Quoted 4 lines
Feb 1 17:04:19 mm-home1 (krm-11020): GConf server is not in use, shutting down. Feb 1 17:04:21 mm-home1 kdm: :0[15897]: Abnormal termination of greeter fordisplay :0, code 127, signal 0
Things are getting worse.
Quoted 4 lines
Feb 1 17:04:29 mm-home1 login(pam_unix)[10286]: session opened for user root by LOGIN(uid=0) Feb 1 17:06:45 mm-home1 __find_get_block_slow() failed. block=1681,b_blocknr=23362423066986129
Or in hex, block=0x691 b_blocknr=0x0053000000000691: something has corrupted the upper short of the bufheader's block number with 0x53.
Well, you're getting plenty of memory corruption, and there's some pattern to it (bits 8-11 each time), but I can't guess where it's coming from, I'm afraid. The "Bad rmap", my speciality, looks merely incidental to the more general memory corruption.
I know you already said you really need to use the nVidia driver for xinerama, but it has to be suspect #1. Any chance of doing without it just for a day, to see what happens then? Or would that force you into such a different work pattern that it would prove nothing?
After that, the next thing to try is going back to 2.6.12: I think you said this bad behaviour started with 2.6.13 (but I may be quite wrong to assume that you were running 2.6.12 before). Perhaps the problem lies with your hardware, but started to manifest around the time you moved to 2.6.13, we do need to rule that out.
Hugh
Quoted 3 lines · Hugh Dickins
Quoted 1 line
Feb 1 17:01:01 mm-home1 cron[31322]: (root) CMD (/usr/bin/updatedb)Okay, so plenty of disk and cache activity then. Were you doing anything interesting at the graphics end?
Nope.. just had a couple vncviewer sessions, firefox, thunderbird, a few superkarmba applets and a couple konsole windows. I'm typically running KDE 3.5.0 on two 19" flatpanels via the DVI ports on a dual-head GF 6600GT card.
One thing I have noticed in the past is I would often get the crash as soon as I resumed from a locked screen. Xscreensaver is set to kick on after 20 mintues and the screensaver would be running fine when I sit back down, but as soon as I gave a mouse/keyboard input it would lockup with a garbled screen. This time however I was actively using the machine when it crashed.
[snip]
Quoted 4 lines
Quoted 2 lines
Feb 1 17:04:14 mm-home1 kdm[10322]: X server for display :0 terminatedunexpectedly
Nothing to say why that was, but we already know the system is bad.
Yep, this is when I get the garbled screen. Sometimes it will stop responding to any input at this point, others it allow me to Ctrl+Alt+F10 into the console. This time I was able to drop to console.
[snip]
Quoted 4 lines
Quoted 4 lines
Feb 1 17:04:29 mm-home1 login(pam_unix)[10286]: session opened for user root by LOGIN(uid=0) Feb 1 17:06:45 mm-home1 __find_get_block_slow() failed. block=1681,b_blocknr=23362423066986129
This was after dropping to console. It let me login to root but before being able to view the logs it started spewing out strings of errors that are scrolling too quickly to read and do not get captured by syslog (either local or remote). I've learned from experience that this is the time to do a hard reboot or it starts trashing up the filesystem. I've had to run "fsck-reiserfs --rebuild-tree" more times than I'd prefer.
Quoted 14 lines
Or in hex, block=0x691 b_blocknr=0x0053000000000691: something has corrupted the upper short of the bufheader's block number with
0x53.Well, you're getting plenty of memory corruption, and there's some pattern to it (bits 8-11 each time), but I can't guess where it's coming from, I'm afraid. The "Bad rmap", my speciality, looks merely incidental to the more general memory corruption.
I know you already said you really need to use the nVidia driver for xinerama, but it has to be suspect #1. Any chance of doing without it just for a day, to see what happens then? Or would that force you into such a different work pattern that it would prove nothing?
Quoted 7 lines
After that, the next thing to try is going back to 2.6.12: I think you said this bad behaviour started with 2.6.13 (but I may be quite wrong to assume that you were running 2.6.12 before). Perhaps the problem lies with your hardware, but started to manifest around the time you moved to 2.6.13, we do need to rule that out.
Hugh
I agree. I will run with the kernel "nv" driver on a single monitor over the weekend to see if I can recreate the problem. Failing that I'll give 2.6.12 another shot. A couple other datapoints that may be worth note:
1) David Spring posted the following message on this thread yesterday that would seem to point away from the binary nvidia driver:
"It's not the nv drivers - or at least not just them. I'm getting this bug once or twice a day on a mini-ITX (C3 533Mhz processor) based server which doesn't even have X installed. For me, it appeared sometime after 2.6.12. I'm now running with gentoo 2.6.15-r1 with Hugh's recently posted patch,and waiting 8-| Dave Spring"
If Dave is able to post a syslog with his errors then it would provide an untainted report.
2) I have also found this thread from the Nvidia forum that would seem to point towards the nvidia driver. Although unlike this person, whose troubles only started with 2.6.15-rc3, I have experienced this bug since the 2.6.13 series.
http://www.nvnews.net/vbulletin/archive/index.php/t-60711.html
Thanks,
Ken
Quoted 9 lines · Ken MacFerrin
I started getting hard lockups on my desktop PC with the error "kernel BUG at
mm/rmap.c:487" starting with kernel 2.6.13 and continuing through 2.6.14. After switching to 2.6.15 the lockups have continued with the message "kernel BUG atmm/rmap.c:486".The frequency and circumstance are completely random which originally had me suspecting bad memory but after running Memtest86+ for over 12 hours without error I'm at a loss.
Quoted 6 lines
I'm running the binary Nvidia driver so I'll understand if I can't get help here but in searching through the list archives it would seem I'm not alone and I am willing to try any patches that may help diagnose the issue. The crash happens at least daily and I've seen no difference in running kernels with or without PREEMPT enabled.
If you don't actually *need* accelerated 3D (or if you could do without it for a while), switching to the "nv" driver for a few days/weeks would be interresting. If the crashes go away that would point towards the nvidia driver, if they don't go away we'll get a nice untainted crash report.
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
Quoted 18 lines · Jesper Juhl
Quoted 9 lines · Ken MacFerrin
I started getting hard lockups on my desktop PC with the error "kernel BUG at
mm/rmap.c:487" starting with kernel 2.6.13 and continuing through 2.6.14. After switching to 2.6.15 the lockups have continued with the message "kernel BUG atmm/rmap.c:486".The frequency and circumstance are completely random which originally had me suspecting bad memory but after running Memtest86+ for over 12 hours without error I'm at a loss.
Quoted 6 lines
I'm running the binary Nvidia driver so I'll understand if I can't get help here but in searching through the list archives it would seem I'm not alone and I am willing to try any patches that may help diagnose the issue. The crash happens at least daily and I've seen no difference in running kernels with or without PREEMPT enabled.
Quoted 6 lines
If you don't actually *need* accelerated 3D (or if you could do without it for a while), switching to the "nv" driver for a few days/weeks would be interresting. If the crashes go away that would point towards the nvidia driver, if they don't go away we'll get a nice untainted crash report.
Thanks to all for the response. In hopes of helping to isolate this I will move back over to the "nv" driver to see if I can recreate the problem and get a clean bug report before applying Hugh's patch.
This crash currently happens daily for me so I should be able to test this relatively quickly. -Ken
Quoted 27 lines · Ken MacFerrin
Quoted 18 lines · Jesper Juhl
Quoted 9 lines · Ken MacFerrin
I started getting hard lockups on my desktop PC with the error "kernel BUG at
mm/rmap.c:487" starting with kernel 2.6.13 and continuing through 2.6.14. After switching to 2.6.15 the lockups have continued with the message "kernel BUG atmm/rmap.c:486".The frequency and circumstance are completely random which originally had me suspecting bad memory but after running Memtest86+ for over 12 hours without error I'm at a loss.
Quoted 6 lines
I'm running the binary Nvidia driver so I'll understand if I can't get help here but in searching through the list archives it would seem I'm not alone and I am willing to try any patches that may help diagnose the issue. The crash happens at least daily and I've seen no difference in running kernels with or without PREEMPT enabled.
Quoted 6 lines
If you don't actually *need* accelerated 3D (or if you could do without it for a while), switching to the "nv" driver for a few days/weeks would be interresting. If the crashes go away that would point towards the nvidia driver, if they don't go away we'll get a nice untainted crash report.
Quoted 4 lines
Thanks to all for the response. In hopes of helping to isolate this I will move back over to the "nv" driver to see if I can recreate the problem and get a clean bug report before applying Hugh's patch.
This crash currently happens daily for me so I should be able to test this relatively quickly. -Ken
Unfortunately it seems that the "nv" driver in Xorg does not currently support multiple displays on a single video card with dual heads. Not being able to at least run xinerama is a deal breaker for me so I'm back to the binary nvidia driver using twinview. At this point I will apply Hugh's patch and post any further "Bad page state" and "Bad rmap" messages as instructed.
Thanks,
Ken
On Monday 30 January 2006 00:56, Ken MacFerrin wrote:
[snip]
Quoted 6 lines
Unfortunately it seems that the "nv" driver in Xorg does not currently support multiple displays on a single video card with dual heads. Not being able to at least run xinerama is a deal breaker for me so I'm back to the binary nvidia driver using twinview. At this point I will apply Hugh's patch and post any further "Bad page state" and "Bad rmap" messages as instructed.
Indeed, Hugh's patch is the best way to proceed with discovering who the culprits are. Using the "nv" driver was not really meant as a debugging aide, but as a last resort if the patch yields nothing useful.
Signature · 6 lines
Cheers, Alistair. 'No sense being pessimistic, it probably wouldn't work anyway.' Third year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Quoted 15 lines · Ken MacFerrin
I started getting hard lockups on my desktop PC with the error "kernel BUG at
mm/rmap.c:487" starting with kernel 2.6.13 and continuing through 2.6.14. After switching to 2.6.15 the lockups have continued with the message "kernel BUG atmm/rmap.c:486".The frequency and circumstance are completely random which originally had me suspecting bad memory but after running Memtest86+ for over 12 hours without error I'm at a loss.
I'm running the binary Nvidia driver so I'll understand if I can't get help here but in searching through the list archives it would seem I'm not alone and I am willing to try any patches that may help diagnose the issue. The crash happens at least daily and I've seen no difference in running kernels with or without PREEMPT enabled.
Quoted 3 lines
The machine is a P4 3.00GHz with 2048MB PC3200 Unbuffered RAM on an ASUS motherboard with an ICH5 chipset. XFX GF 6600GT video card, 600W power supply and plenty of cooling.
Ken,
Just to let you know, I've had the same problem on x86-64. It's an incredibly rare fault here and I've not been able to reproduce it. However, I cannot help but notice that all of the reporters so far have been running the binary NVIDIA driver, including myself.
I would not be surprised if running without the NVIDIA driver eliminated the problem.
Signature · 6 lines
Cheers, Alistair. 'No sense being pessimistic, it probably wouldn't work anyway.' Third year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Quoted 7 lines
Just to let you know, I've had the same problem on x86-64. It's an incredibly rare fault here and I've not been able to reproduce it. However, I cannot help but notice that all of the reporters so far have been running the binary NVIDIA driver, including myself.
I would not be surprised if running without the NVIDIA driver eliminated the problem.
Not running either with the NVIDIA driver or with x86-64 on the machine I'm getting this on, but I get it fairly often (as in: today I've probably gotten it at least 5-10 times). It seems it's pretty bound by either high CPU or disk usage, since I've always gotten it while compiling stuff so far. Although my system doesn't hard lock if I get this error; I can at least run most commands and ssh into it.
Not sure if everything in the dmesg output is relevant, but one can never be sure, so I'm pasting the entire one. Flame on if I'm spamming you ;)
Oh btw. I'm not subscribed to the mailinglist, so if you'd be kind enough to CC me I'd be grateful.
Hope this helps,
Patrick B�rjesson
---------- dmesg output ----------
Linux version 2.6.15-gentoo-r7 (root@scrapheap) (gcc version 3.4.5 (Gentoo 3.4.5-r1, ssp-3.4.5-1.0, pie-8.7.9)) #3 PREEMPT Sat Mar 11 23:46:29 CET 2006 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131068
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 126972 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f5e40
ACPI: RSDT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x1fffc000
ACPI: FADT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x1fffc0b2
ACPI: BOOT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x1fffc030
ACPI: MADT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x1fffc058
ACPI: DSDT (v001 ASUS A7S333 0x00001000 MSFT 0x0100000b) @ 0x00000000
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/hdc3 udev video=vesafb:ywrap,mtrr,1024x768-16@85 splash=silent,theme:emergence CONSOLE=/dev/tty1 quiet Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1311.863 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514508k/524272k available (2480k kernel code, 9208k reserved, 684k data, 168k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2627.25 BogoMIPS (lpj=5254503)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Duron(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c60)
checking if image is initramfs... it is
Freeing initrd memory: 789k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf19a0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:01: ioport range 0xe480-0xe4ff has been reserved
pnp: 00:01: ioport range 0xe600-0xe61f has been reserved
pnp: 00:01: ioport range 0x480-0x48f has been reserved
pnp: 00:0e: ioport range 0x290-0x297 has been reserved
pnp: 00:0e: ioport range 0x500-0x507 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e7000000-e7ffffff
PREFETCH window: ef700000-febfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1142120887.156:1): initialized
NTFS driver 2.1.25 [Flags: R/O].
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 745 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized drm 1.0.0 20040925
vesafb: unrecognized option mtrr
vesafb: NVidia Corporation, NV17 () Board, Chip Rev A2 (OEM: NVidia)
vesafb: VBE version: 3.0
vesafb: protected mode interface info at c000:ede0
vesafb: pmi: set display start = c00cee25, set palette = c00ceeaa
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: VBIOS/hardware supports DDC2 transfers
Display is GTF capable
vesafb: monitor limits: vf = 160 Hz, hf = 96 kHz, clk = 250 MHz
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=3750
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 7500k, total 65536k
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
eth0: RealTek RTL-8029 found at 0xa800, IRQ 5, 00:00:21:E4:85:F0.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS745 ATA 100 (2nd gen) controller
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMAProbing IDE interface ide0...
hda: Maxtor 91000D8, ATA DISK drive
hdb: WDC WD400BB-60AUA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6E040L0, ATA DISK drive
hdd: SONY CD-RW CRX225E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 19545120 sectors (10007 MB) w/512KiB Cache, CHS=19390/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1
hdb: max request size: 128KiB
hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes not supported
hdb: hdb1 hdb2 < hdb5 hdb6 >
hdc: max request size: 128KiB
hdc: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 hdc4
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
usbcore: registered new driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driver
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 PCI1 PS2K PS2M USB0 USB1 MC97
ACPI: (supports S0 S1 S4 S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 168k freed
kjournald starting. Commit interval 5 seconds
Adding 999328k swap on /dev/hdc2. Priority:-1 extents:1 across:999328k EXT3 FS on hdc3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:02.2: OHCI Host Controllerohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.2: irq 5, io mem 0xe6800000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 6 (level, low) -> IRQ 6 ohci_hcd 0000:00:02.3: OHCI Host Controllerohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.3: irq 6, io mem 0xe6000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-1: new full speed USB device using ohci_hcd and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.4: new full speed USB device using ohci_hcd and address 3 scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: Generic Model: USB SD Reader Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: Generic Model: USB CF Reader Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 00
sd 0:0:0:1: Attached scsi removable disk sdb
sd 0:0:0:1: Attached scsi generic sg1 type 0
Vendor: Generic Model: USB SM Reader Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 00
sd 0:0:0:2: Attached scsi removable disk sdc
sd 0:0:0:2: Attached scsi generic sg2 type 0
Vendor: Generic Model: USB MS Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 00
sd 0:0:0:3: Attached scsi removable disk sdd
sd 0:0:0:3: Attached scsi generic sg3 type 0
usb-storage: device scan complete
------------[ cut here ]------------ kernel BUG at mm/rmap.c:486! invalid operand: 0000 [#1] PREEMPT Modules linked in: ehci_hcd ohci_hcd CPU: 0 EIP: 0060:[<c0152fd0>] Not tainted VLI EFLAGS: 00010286 (2.6.15-gentoo-r7)
EIP is at page_remove_rmap+0x30/0x40
eax: ffffffff ebx: cbb07b8c ecx: 0001dac2 edx: c13b5840
esi: b7ee3000 edi: c13b5840 ebp: c8f5be30 esp: c8f5bd8c
ds: 007b es: 007b ss: 0068
Process i686-pc-linux-g (pid: 5448, threadinfo=c8f5a000 task=de1f1ab0)
Stack: 00003ff4 cbb07b8c c014c0b6 c13b5840 b7ee3000 1dac2025 1dac2025 00000000
fffffffb defc31e0 b7fbc000 d3448b80 b7fbc000 c8f5be30 c014c265 c04490b4
df6f738c d3448b7c b7ed3000 b7fbc000 c8f5be30 00000000 b7fbbfff d3448b7c
Call Trace:
[<c014c0b6>] zap_pte_range+0x156/0x250
[<c014c265>] unmap_page_range+0xb5/0x140
[<c014c3df>] unmap_vmas+0xef/0x1f0
[<c01511c7>] exit_mmap+0x77/0x110
[<c01165d7>] mmput+0x37/0xb0
[<c011b38b>] do_exit+0xeb/0x440
[<c011b754>] do_group_exit+0x34/0xa0
[<c0125657>] get_signal_to_deliver+0x217/0x360
[<c010307e>] do_signal+0x6e/0x150
[<c014d0e5>] do_wp_page+0x1e5/0x2e0
[<c0167c5c>] vfs_lstat+0x1c/0x70
[<c0113607>] do_page_fault+0x2a7/0x5a8
[<c0113360>] do_page_fault+0x0/0x5a8
[<c0103197>] do_notify_resume+0x37/0x3c
[<c0103356>] work_notifysig+0x13/0x19
Code: 24 0c 83 42 08 ff 0f 98 c0 84 c0 74 1a 8b 42 08 40 78 18 c7 44 24 04 ff ff ff ff c7 04 24 10 00 00 00 e8 44 ef fe ff 83 c4 08 c3 <0f> 0b e6 01 ef 1f 38 c0 eb de 8d b6 00 00 00 00 83 ec 2c 89 5c
<1>Fixing recursive fault but reboot is needed!
scheduling while atomic: i686-pc-linux-g/0x00000002/5448
[<c036a1a7>] schedule+0x587/0x660
[<c0103356>] work_notifysig+0x13/0x19
[<c0152fe5>] try_to_unmap_one+0x5/0x230
[<c011b52a>] do_exit+0x28a/0x440
[<c01190b7>] printk+0x17/0x20
[<c0103ff0>] do_invalid_op+0x0/0xb0
[<c0103c65>] die+0x185/0x190
[<c0104092>] do_invalid_op+0xa2/0xb0
[<c0152fd0>] page_remove_rmap+0x30/0x40
[<c0176bd5>] dput+0x55/0x290
[<c016d37e>] __link_path_walk+0xbce/0xf70
[<c0140ab4>] bad_range+0x34/0x50
[<c01034ef>] error_code+0x4f/0x54
[<c0152fd0>] page_remove_rmap+0x30/0x40
[<c014c0b6>] zap_pte_range+0x156/0x250
[<c014c265>] unmap_page_range+0xb5/0x140
[<c014c3df>] unmap_vmas+0xef/0x1f0
[<c01511c7>] exit_mmap+0x77/0x110
[<c01165d7>] mmput+0x37/0xb0
[<c011b38b>] do_exit+0xeb/0x440
[<c011b754>] do_group_exit+0x34/0xa0
[<c0125657>] get_signal_to_deliver+0x217/0x360
[<c010307e>] do_signal+0x6e/0x150
[<c014d0e5>] do_wp_page+0x1e5/0x2e0
[<c0167c5c>] vfs_lstat+0x1c/0x70
[<c0113607>] do_page_fault+0x2a7/0x5a8
[<c0113360>] do_page_fault+0x0/0x5a8
[<c0103197>] do_notify_resume+0x37/0x3c
[<c0103356>] work_notifysig+0x13/0x19Signature · 2 lines
/ () The ASCII Ribbon Campaign - against HTML Email \ /\ and proprietary formats.
Quoted 8 lines · Patrick B�rjesson
Quoted 7 lines
Just to let you know, I've had the same problem on x86-64. It's an incredibly rare fault here and I've not been able to reproduce it. However, I cannot help but notice that all of the reporters so far have been running the binary NVIDIA driver, including myself.
I would not be surprised if running without the NVIDIA driver eliminated the problem.
Quoted 6 lines
Not running either with the NVIDIA driver or with x86-64 on the machine I'm getting this on, but I get it fairly often (as in: today I've probably gotten it at least 5-10 times). It seems it's pretty bound by either high CPU or disk usage, since I've always gotten it while compiling stuff so far. Although my system doesn't hard lock if I get this error; I can at least run most commands and ssh into it.
Please don't do anything! A reproducible test case without NVIDIA loaded is exactly what we've been waiting for.
Please search the archives for Hugh Dickins's patch for 2.6.15 which enables additional rmap debug. Then try to reproduce the fault.
Signature · 6 lines
Cheers, Alistair. 'No sense being pessimistic, it probably wouldn't work anyway.' Third year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Quoted 8 lines · On Sun, 2006-03-12 at 01:06 +0100, Patrick =?utf-8?Q?B=F6rjesson?= wrote:
Quoted 7 lines
Just to let you know, I've had the same problem on x86-64. It's an incredibly rare fault here and I've not been able to reproduce it. However, I cannot help but notice that all of the reporters so far have been running the binary NVIDIA driver, including myself.
I would not be surprised if running without the NVIDIA driver eliminated the problem.
Quoted 6 lines
Not running either with the NVIDIA driver or with x86-64 on the machine I'm getting this on, but I get it fairly often (as in: today I've probably gotten it at least 5-10 times). It seems it's pretty bound by either high CPU or disk usage, since I've always gotten it while compiling stuff so far. Although my system doesn't hard lock if I get this error; I can at least run most commands and ssh into it.
just to rule the last issue out: this machine survives memtest86 ?
On 2006-03-12 10:05, Arjan van de Ven uttered these thoughts:
Quoted 18 lines
Quoted 8 lines · On Sun, 2006-03-12 at 01:06 +0100, Patrick =?utf-8?Q?B=F6rjesson?= wrote:
Quoted 7 lines
Just to let you know, I've had the same problem on x86-64. It's an incredibly rare fault here and I've not been able to reproduce it. However, I cannot help but notice that all of the reporters so far have been running the binary NVIDIA driver, including myself.
I would not be surprised if running without the NVIDIA driver eliminated the problem.
Quoted 6 lines
Not running either with the NVIDIA driver or with x86-64 on the machine I'm getting this on, but I get it fairly often (as in: today I've probably gotten it at least 5-10 times). It seems it's pretty bound by either high CPU or disk usage, since I've always gotten it while compiling stuff so far. Although my system doesn't hard lock if I get this error; I can at least run most commands and ssh into it.
Quoted 1 line
just to rule the last issue out: this machine survives memtest86 ?
I'm sorry to have wasted your time; no, it didn't =\
Didn't think to run it before since the mem-stick in the machine is pretty new (not more than 2 months).
Sorry again,
Patrick Börjesson
Signature · 2 lines
/ () The ASCII Ribbon Campaign - against HTML Email \ /\ and proprietary formats.
Quoted 4 lines · Patrick
------------[ cut here ]------------ kernel BUG at mm/rmap.c:486! EIP is at page_remove_rmap+0x30/0x40 [<c014c0b6>] zap_pte_range+0x156/0x250
This could easily be something that's already been fixed by now, or it may still be a problem... can you test with the most recent kernel (2.6.16-rc6)? Thanks.
Signature · 2 lines
SUSE Labs, Novell Inc. Send instant messages to your online friends http://au.messenger.yahoo.com