Skip to contentSkip to conversation

multipath-tools: IBM hwtable update

PATCH Applied Hannes Reinecke 2 participants 2 messages Mar 13, 2006 Device mapper

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 multipath-tools: IBM hwtable update

Hi Christophe,

attached is an update for the IBM hwtable.
There is a new hardware ID for the IBM F20; and I've also switched to 'dasd_id' from udev instead of dasdview from s390-tools.

Please apply.

Cheers,

Hannes

Signature · 4 lines
Dr. Hannes Reinecke			[email protected]
SuSE Linux Products GmbH		S390 & zSeries
Maxfeldstraße 5				+49 911 74053 688
90409 Nürnberg				http://www.suse.de
libmultipath/hwtable.c +3 -3
index 5c7d625..008e518 100644
@@ -201,7 +201,7 @@ static struct hwentry default_hw[] = {
 	/*
 	 * IBM controler family
 	 *
-	 * Maintainer : Hannes Reinecke, Suse
+	 * Maintainer : Hannes Reinecke, SuSE
 	 * Mail : [email protected]
 	 */
 	{
@@ -254,7 +254,7 @@ static struct hwentry default_hw[] = {
 	{
 		/* IBM ESS F20 aka Shark */
 		.vendor        = "IBM",
-		.product       = "2105F20",
+		.product       = "2105{800,F20}",
 		.getuid        = DEFAULT_GETUID,
 		.getprio       = NULL,
 		.features      = "1 queue_if_no_path",
@@ -303,7 +303,7 @@ static struct hwentry default_hw[] = {
 		/* IBM S/390 ECKD DASD */
 		.vendor        = "IBM",
 		.product       = "S/390 DASD ECKD",
-		.getuid        = "/sbin/dasdview -j /dev/%n",
+		.getuid        = "/sbin/dasd_id /dev/%n",
 		.getprio       = NULL,
 		.features      = DEFAULT_FEATURES,
 		.hwhandler     = DEFAULT_HWHANDLER,
#1 lore raw
Quoted 8 lines · Hannes Reinecke

Hi Christophe,

attached is an update for the IBM hwtable.
There is a new hardware ID for the IBM F20; and I've also switched to 'dasd_id' from udev instead of dasdview from s390-tools.

Please apply.

Applied, thanks.

Regards,
cvaroqui