Skip to contentSkip to conversation

Ethernet console for u-boot diag

U-Boot-Users Rahmat M 2 participants 3 messages Mar 15, 2006 – Mar 16, 2006

lore
Share & tools
lore

Rahmat M

author
#0 lore raw

Hi,

Platform: custom MPC8541/8555 board

Actually 2 questions please,

1-Not having access to DUART header at test side, is there a way to get a console to u-boot through TSEC interface. If so may I get a pointer to the patch/code?

2-Has anyone done a menu based diagnostics tool in u-boot/kernel to test hardware interfaces(CPU, memory,pci & etc...) for PPC/MPC cpu families that I may be able to leverage from. This is normally provided to manufacturing for extensive testing.

Thanks and Regards,

Rahmat

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

#1 lore raw
Quoted 5 lines · In message <[email protected]> you wrote:

1-Not having access to DUART header at test side, is there a way to get a console to u-boot through TSEC interface. If so may I get a pointer to the patch/code?

See doc/README.NetConsole

Quoted 1 line

2-Has anyone done a menu based diagnostics tool in

Menu based? That's a different reality system.

Quoted 3 lines

u-boot/kernel to test hardware interfaces(CPU, memory,pci & etc...) for PPC/MPC cpu families that I may be able to leverage from. This is normally

See the post/ directory; parts will need adaption / porting for 85xx.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Of course there's no reason for it, it's just our policy.
author
#2 lore raw

Hi,

Thank you very much as usual!! I am almost there. I used the directions from the readme file and by defining the CONFIG_NETCONSOLE, the console is semi functional. I can not input anything to the net console however do see the output when I type over the serial console. Looks as "stdin" change is not working. I'll keep on debugging. Your comments are always welcomed.