Skip to contentSkip to conversation

More than 8 CPUs detected and CONFIG_X86_PC cannot handle it on 2.6.16-rc6

DISCUSSION Chuck Ebbert 2 participants 2 messages Mar 15, 2006

lore
Share & tools
lore
#0 lore raw

In-Reply-To: <[email protected]>

Quoted 7 lines · Krzysztof Oledzki

After upgrading to 2.6.16-rc6 I noticed this strange message:

More than 8 CPUs detected and CONFIG_X86_PC cannot handle it. Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.

This is a Dell PowerEdge SC1425 with two P4 Xeons with HT enabled (so with totoal of 4 logical CPUs).

Quoted 4 lines · you

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20

             ^
Quoted 4 lines

ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20

             ^

What processor numbers did you get on 2.6.15.x?
Does /proc/cpuinfo show all four CPUs?
If you start four CPU-hungry processes, do all four show 100% utilization in top(1)?

Signature · 2 lines
Chuck
"Penguins don't come from next door, they come from the Antarctic!"
#1 lore raw
Quoted 18 lines · Chuck Ebbert

In-Reply-To: <[email protected]>

Quoted 7 lines · Krzysztof Oledzki

After upgrading to 2.6.16-rc6 I noticed this strange message:

More than 8 CPUs detected and CONFIG_X86_PC cannot handle it. Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.

This is a Dell PowerEdge SC1425 with two P4 Xeons with HT enabled (so with totoal of 4 logical CPUs).

Quoted 4 lines · you

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20

Quoted 8 lines
            ^
Quoted 4 lines

ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20

            ^

What processor numbers did you get on 2.6.15.x?

Mar  6 00:08:03 fw2 kernel: Processor #0 15:4 APIC version 20
Mar  6 00:08:03 fw2 kernel: Processor #6 15:4 APIC version 20
Mar  6 00:08:03 fw2 kernel: Processor #1 15:4 APIC version 20
Mar  6 00:08:03 fw2 kernel: Processor #7 15:4 APIC version 20
Quoted 1 line

Does /proc/cpuinfo show all four CPUs?

Yes.

# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Intel(R) Xeon(TM) CPU 3.20GHz
stepping        : 3
cpu MHz         : 3200.000
cache size      : 2048 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips        : 6404.87

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.20GHz
stepping : 3
cpu MHz : 3200.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips : 6400.28

processor : 2
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.20GHz
stepping : 3
cpu MHz : 2800.000
cache size : 2048 KB
physical id : 3
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips : 6400.31

processor : 3
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.20GHz
stepping : 3
cpu MHz : 2800.000
cache size : 2048 KB
physical id : 3
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips : 6400.32

Quoted 1 line

If you start four CPU-hungry processes, do all four show 100% utilization in top(1)?

# cd /usr/src/linux
# /usr/bin/time make -j10 (...)

Cpu0 : 94.4% us, 5.3% sy, 0.0% ni, 0.3% id, 0.0% wa, 0.0% hi, 0.0% si Cpu1 : 92.4% us, 5.3% sy, 0.0% ni, 2.3% id, 0.0% wa, 0.0% hi, 0.0% si Cpu2 : 91.7% us, 6.6% sy, 0.0% ni, 0.3% id, 1.3% wa, 0.0% hi, 0.0% si Cpu3 : 94.7% us, 5.3% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.0% hi, 0.0% si

Best regards,

Krzysztof Olędzki