procfs uglyness caused by "cat"
A message that is not in the archive (sent off-list or not yet received): [email protected]
Review
Quoted 12 lines · Herbert Rosmanith
a simple way to get rid of this:
static int uptime_read_proc(char *page, char **start,
off_toff,
int count, int *eof, void *data){ struct timespec uptime; struct timespec idle; int len; cputime_t idletime;(quoted diff) +2
-0+ if (off) + return 0;
Except that this is wrong - if you try to advance the offset a bit from the start of the file and read something, you'll get nothing. This is inconsistent with normal file behavior.
Signature · 3 lines
Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from [email protected] Home Page: http://www.roberthancock.com/
Quoted 8 lines
Quoted 8 lines
static int uptime_read_proc(char *page, char **start,
off_toff,
int count, int *eof, void *data){ struct timespec uptime; struct timespec idle; int len; cputime_t idletime;
Quoted 7 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ if (off) + return 0;Except that this is wrong - if you try to advance the offset a bit from
the start of the file and read something, you'll get nothing. This is inconsistent with normal file behavior.
Right... What's weird is : what do we get if a process decides to read this using a 1 byte buffer, asking for 1 char at a time ? And what we'll be the result if you read 1 char every 1 second ?
#include <stdio.h>
int main(int argc, char * argv[])
{
FILE * f;
char lChar;
f = fopen("/proc/uptime", "r");
if (f == NULL) {
exit(0);
} /* endif */
while (!feof(f)) {
fread(&lChar, 1, 1, f);
fprintf(stdout, "%c", lChar); fflush(stdout);
sleep(1);
} /* endwhile */
close(f); exit(0);
}
is funny enough...
2.2.x :
58 [15:30] rol@www-dev:/tmp> cat /proc/uptime ; ./test 13849305.25 13555633.92
13849312.38 13555635.64
2.4.31 :
bash-2.05# cat /proc/uptime ; ./test
100711.77 100366.30
100711.77 100366.30
Paul
Quoted 1 line · Paul Rolland
is funny enough...
You used the stdio routine fread - which buffers in user space. It does a single read, and then feeds you the characters as you ask for them, out of its stdio buffer.
Try the following program, which doesn't buffer:
main()
{
char c;
int fd = open("/proc/uptime", 0);
while (read(fd, &c, 1) == 1) {
write(1, &c, 1);
sleep(1);
}
}Signature · 3 lines
I won't rest till it's the best ...
Programmer, Linux Scalability
Paul Jackson <[email protected]> 1.925.600.0401Hello,
Quoted 9 lines
main(){ char c; int fd = open("/proc/uptime", 0); while (read(fd, &c, 1) == 1) { write(1, &c, 1); sleep(1); } }
Yes, much better, same result for 2.2.x and 2.4.31 :
bash-2.05# cat /proc/uptime; ./test2 112049.81 111665.11
112054.89 111670.29
The result is more "correct", but I guess this makes it worse for Herbert, as uptime_read_proc() is then called for each character...
Paul
Quoted 8 lines
Quoted 8 lines
static int uptime_read_proc(char *page, char **start,
off_toff,
int count, int *eof, void *data){ struct timespec uptime; struct timespec idle; int len; cputime_t idletime;
Quoted 6 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ if (off) + return 0;Except that this is wrong - if you try to advance the offset a bit from the start of the file and read something, you'll get nothing. This is inconsistent with normal file behavior.
so what - "uptime_read_proc" ignores the offset parameter anyway. you get wrong results right now, too, even without the two lines I've added.
if you write "Except that this is wrong" you should have in mind that "this is wrong" currently, too.
just "try to advance the offset a bit from the start of the file and read something", like "dd if=/proc/uptime bs=1 count=1 seek=1". do you expect to get right results?
regards,
h.rosmanith
Quoted 19 lines
Quoted 8 lines
Quoted 8 lines
static int uptime_read_proc(char *page, char **start,
off_toff,
int count, int *eof, void *data){ struct timespec uptime; struct timespec idle; int len; cputime_t idletime;Quoted 6 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ if (off) + return 0;Except that this is wrong - if you try to advance the offset a bit from the start of the file and read something, you'll get nothing. This is inconsistent with normal file behavior.
so what - "
uptime_read_proc" ignores the offset parameter anyway. you get wrong results right now, too, even without the two lines I've added.
Quoted 6 lines
if you write "Except that this is wrong" you should have in mind that "this is wrong" currently, too.
just "try to advance the offset a bit from the start of the file and read something", like "dd if=/proc/uptime bs=1 count=1 seek=1". do you expect to get right results?
argh, my mistake, sorry. I see. I tried reading a character at a time and with the two lines, /proc/uptime will return only a single character.
so even though currently the update-routine is called more than needed, my patch is even more wrong.
but this means that e.g.:
int main() {
int fd;
char ch;
fd=open("/proc/uptime",0);
for(;;) {
if (read(fd,&ch,1)!=1)
break;
write(1,&ch,1);
}
}will call the buffer-formatting routines 16 times on the whole buffer, just to return 1 single character, and each call will return a different result. eeks...
by the way: why does "dd if=/proc/uptime bs=1 seek=1" hang? e.g.:
root@afp ~ # strace -f dd if=/proc/uptime bs=1 count=1 seek=1
open("/proc/uptime", O_RDONLY|O_LARGEFILE) = 0
...
_llseek(1, 1, 0xbfaa8464, SEEK_CUR) = -1 ESPIPE (Illegal seek)
read(1, <unfinished ...>processing stops here.
regards,
h.rosmanith
regards,
h.rosmanith