doc: Updated Documentation/nfsroot.txt
PATCH 1/1 doc: Updated Documentation/nfsroot.txt
Hello LKML!
What am I doing terrible wrong that I do not get any comment on this patch?
----- Forwarded message from Arthur Othieno <[email protected]> -----
Date: Tue, 14 Feb 2006 11:05:53 -0500
To: [email protected]
Cc: Nico Schottelius <[email protected]>,
Arthur Othieno <[email protected]>
Subject: [PATCH] doc: Updated Documentation/nfsroot.txt
From: Arthur Othieno <[email protected]>
From: Nico Schottelius <[email protected]>
I today booted the first time my embedded device using Linux 2.6.15.2, which was booted by pxelinux, which then bootet itself from the nfsroot.
This went pretty fine, but when I was reading through Documentation/nfsroot.txt I saw that there are some more modern versions available of loading the kernel and passing parameters.
So I added them and the patch for that is attached to this mail.
---
Documentation/nfsroot.txt | 17 ++++++++++++++--- 1 files changed, 14 insertions(+), 3 deletions(-)
bb5fd479f34c5c53f3e3316052656c7795c02f90
Documentation/nfsroot.txt +14 -3
@@ -3,6 +3,7 @@ Mounting the root filesystem via NFS (nf Written 1996 by Gero Kuhlmann <[email protected]> Updated 1997 by Martin Mares <[email protected]> +Updated 2006 by Nico Schottelius <[email protected]>
@@ -168,7 +169,6 @@ depend on what facilities are available: root. If it got a BOOTP answer the directory name in that answer is used. - 3.2) Using LILO When using LILO you can specify all necessary command line parameters with the 'append=' command in the LILO configuration
@@ -177,7 +177,11 @@ depend on what facilities are available: LILO and its 'append=' command please refer to the LILO documentation. -3.3) Using loadlin +3.3) Using GRUB + When you use GRUB, you simply append the parameters after the kernel + specification: "kernel <kernel> <parameters>" (without the quotes). + +3.4) Using loadlin When you want to boot Linux from a DOS command prompt without having a local hard disk to mount as root, you can use loadlin. I was told that it works, but haven't used it myself yet. In
@@ -185,7 +189,7 @@ depend on what facilities are available: lar to how LILO is doing it. Please refer to the loadlin docu- mentation for further information. -3.4) Using a boot ROM +3.5) Using a boot ROM This is probably the most elegant way of booting a diskless client. With a boot ROM the kernel gets loaded using the TFTP protocol. As far as I know, no commercial boot ROMs yet
@@ -194,6 +198,13 @@ depend on what facilities are available: and its mirrors. They are called 'netboot-nfs' and 'etherboot'. Both contain everything you need to boot a diskless Linux client. +3.6) Using pxelinux + Using pxelinux you specify the kernel you built with + "kernel <relative-path-below /tftpboot>". The nfsroot parameters + are passed to the kernel by adding them to the "append" line. + You may perhaps also want to fine tune the console output, + see Documentation/serial-console.txt for serial console help. +
Signature · 8 lines
1.1.5 ----- End forwarded message ----- -- Please reply to nico-kernel2 (same domain as sending address). Replying to this address needs a confirmation, but works, too.
Quoted 4 lines · Nico Schottelius
Hello LKML!
What am I doing terrible wrong that I do not get any comment on this patch?
I'll fall out as patch monkey in re-transmission mode now. Please send patch to <[email protected]> (added to Cc). Thanks.
Quoted 95 lines
----- Forwarded message from Arthur Othieno <[email protected]> -----
Date: Tue, 14 Feb 2006 11:05:53 -0500
To: [email protected]
Cc: Nico Schottelius <[email protected]>,
Arthur Othieno <[email protected]>
Subject: [PATCH] doc: UpdatedDocumentation/nfsroot.txt
From: Arthur Othieno <[email protected]>From: Nico Schottelius <[email protected]>
I today booted the first time my embedded device using Linux 2.6.15.2, which was booted by pxelinux, which then bootet itself from the nfsroot.
This went pretty fine, but when I was reading through
Documentation/nfsroot.txtI saw that there are some more modern versions available of loading the kernel and passing parameters.So I added them and the patch for that is attached to this mail.
Signed-off-by Nico Schottelius <[email protected]>Signed-off-by Arthur Othieno <[email protected]>---
Documentation/nfsroot.txt | 17 ++++++++++++++--- 1 files changed, 14 insertions(+), 3 deletions(-)
bb5fd479f34c5c53f3e3316052656c7795c02f90Documentation/nfsroot.txt +14
-3@@ -3,6 +3,7 @@ Mounting the root filesystem via NFS (nf Written 1996 by Gero Kuhlmann <[email protected]> Updated 1997 by Martin Mares <[email protected]> +Updated 2006 by Nico Schottelius <[email protected]>@@ -168,7 +169,6 @@ depend on what facilities are available: root. If it got a BOOTP answer the directory name in that answer is used. - 3.2) Using LILO When using LILO you can specify all necessary command line parameters with the 'append=' command in the LILO configuration@@ -177,7 +177,11 @@ depend on what facilities are available: LILO and its 'append=' command please refer to the LILO documentation. -3.3) Using loadlin +3.3) Using GRUB + When you use GRUB, you simply append the parameters after the kernel + specification: "kernel <kernel> <parameters>" (without the quotes). + +3.4) Using loadlin When you want to boot Linux from a DOS command prompt without having a local hard disk to mount as root, you can use loadlin. I was told that it works, but haven't used it myself yet. In@@ -185,7 +189,7 @@ depend on what facilities are available: lar to how LILO is doing it. Please refer to the loadlin docu- mentation for further information. -3.4) Using a boot ROM +3.5) Using a boot ROM This is probably the most elegant way of booting a diskless client. With a boot ROM the kernel gets loaded using the TFTP protocol. As far as I know, no commercial boot ROMs yet@@ -194,6 +198,13 @@ depend on what facilities are available: and its mirrors. They are called 'netboot-nfs' and 'etherboot'. Both contain everything you need to boot a diskless Linux client. +3.6) Using pxelinux + Using pxelinux you specify the kernel you built with + "kernel <relative-path-below /tftpboot>". The nfsroot parameters + are passed to the kernel by adding them to the "append" line. + You may perhaps also want to fine tune the console output, + see Documentation/serial-console.txt for serial console help. +Signature · 8 lines
1.1.5 ----- End forwarded message ----- -- Please reply to nico-kernel2 (same domain as sending address). Replying to this address needs a confirmation, but works, too.
Setting From: address on your end is trivial. Having to jump through hoops like these to provide any feedback is just a waste of peoples' time, really.
Quoted 10 lines · Arthur Othieno
On Sat, Mar 18, 2006 at 12:02:32PM +0100, Nico Schottelius wrote:
I'll fall out as patch monkey in re-transmission mode now. Please send patch to <[email protected]> (added to Cc). Thanks.Quoted 3 lines
Signature · 2 lines
Please reply to nico-kernel2 (same domain as sending address). Replying to this address needs a confirmation, but works, too.Setting From: address on your end is trivial. Having to jump through hoops like these to provide any feedback is just a waste of peoples' time, really.
Nico does this willfully for whatever reasons (trapping SPAM or something), I even asked him to stop this nonsense some time ago but he seemed to like that idea. (I was about to help him on a problem at that time.) So right now, he's in my ~/.killfile ... No hassle...
MfG, JBG
Signature · 4 lines
Jan-Benedict Glaw [email protected] . +49-172-7608481 _ O _ "Eine Freie Meinung in einem Freien Kopf | Gegen Zensur | Gegen Krieg _ _ O für einen Freien Staat voll Freier Bürger" | im Internet! | im Irak! O O O ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA));
Arthur Othieno [Sat, Mar 18, 2006 at 09:55:48AM -0500]:
Quoted 4 lines
[...]
Setting From: address on your end is trivial. Having to jump through hoops like these to provide any feedback is just a waste of peoples' time, really.
Sorry, did not really see that is so annoying.
So now you can reply directly to me.
Nico
Signature · 1 line
:x