Skip to contentSkip to conversation

No Printing with Kernel 2.6.14.4

DISCUSSION Peter 3 participants 4 messages Mar 19, 2006 – Mar 20, 2006

lore
Share & tools
lore

Peter

author
#0 lore raw

Hi,

Slackware 10.2

When I change from kernel 2.4.31 to kernel 2.6.14.4 by installing kernel-generic-2.6.14.4-i686-2sh.tgz and kernel-modules-2.6.14.4-i686-2sh.tgz I cannot print anymore since apparently there is no provision for a parallel port which my printer Epson LQ 300 is using. At least when configuring the printer using gnome-cups-manager with kernel 2.6.14.4 it only shows serial and usb ports.

How would I go about getting a parallel port into the 2.6.14.4 kernel. Could I copy it from the 2.4.31 modules and which one?

In /usr/src I have no linux-2.6.14 directory only one for linux-2.4.31.

Thanks & regards

Signature · 7 lines
Peter

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#1 lore raw
Quoted 4 lines · Peter

Hi,

Slackware 10.2

Quoted 8 lines

When I change from kernel 2.4.31 to kernel 2.6.14.4 by installing kernel-generic-2.6.14.4-i686-2sh.tgz and kernel-modules-2.6.14.4-i686-2sh.tgz
I cannot print anymore since apparently there is no provision for a parallel port which my printer Epson LQ 300 is using. At least when configuring the printer using gnome-cups-manager with kernel 2.6.14.4 it only shows serial and usb ports.

How would I go about getting a parallel port into the 2.6.14.4 kernel. Could I copy it from the 2.4.31 modules and which one?

In /usr/src I have no linux-2.6.14 directory only one for linux-2.4.31.

Thanks & regards

I just checked the kernel source I have handy (2.6.11, Debian package) and it appears to offer parallel port support. The relevant modules are parport and parport_pc (the same as 2.4.x, I think ... it's been some years since I used a parallel port). You might try modprobe'ing these modules and see what results. If Slackware left them out of its standard modules package, I can't imagine why.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#2 lore raw
Quoted 18 lines · Ray Olszewski
Quoted 17 lines · Peter

Hi,

Slackware 10.2

When I change from kernel 2.4.31 to kernel 2.6.14.4 by installing kernel-generic-2.6.14.4-i686-2sh.tgz and kernel-modules-2.6.14.4-i686-2sh.tgz
I cannot print anymore since apparently there is no provision for a parallel port which my printer Epson LQ 300 is using. At least when configuring the printer using gnome-cups-manager with kernel 2.6.14.4 it only shows serial and usb ports.

How would I go about getting a parallel port into the 2.6.14.4 kernel. Could I copy it from the 2.4.31 modules and which one?

In /usr/src I have no linux-2.6.14 directory only one for linux-2.4.31.

Quoted 8 lines
Quoted 1 line

Thanks & regards

I just checked the kernel source I have handy (2.6.11, Debian package) and it appears to offer parallel port support. The relevant modules are parport and parport_pc (the same as 2.4.x, I think ... it's been some years since I used a parallel port). You might try modprobe'ing these modules and see what results. If Slackware left them out of its standard modules package, I can't imagine why.

I suspect it's because Patrick wants us to use CUPS for
printing and he feels that impact printers are "obsolete."

IIRC I modprobed either parport or parport_pc; modprobe
automatically loading the other..

Signature · 7 lines
    Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1   (2.4.29)
.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
author
#3 lore raw
In reply to Ray Olszewski
Quoted 9 lines · On Sat, 18 Mar 2006 23:02:55 -0800 Ray Olszewski <[email protected]> wrote:
Quoted 8 lines · Peter

Hi,

Slackware 10.2

When I change from kernel 2.4.31 to kernel 2.6.14.4 by installing kernel-generic-2.6.14.4-i686-2sh.tgz and kernel-modules-2.6.14.4-i686-2sh.tgz
I cannot print anymore since apparently there is no provision for a

parallel

Quoted 7 lines
Quoted 6 lines

port which my printer Epson LQ 300 is using. At least when configuring the

printer using gnome-cups-manager with kernel 2.6.14.4 it only shows serial and usb ports.

How would I go about getting a parallel port into the 2.6.14.4 kernel.

Quoted 8 lines
Quoted 1 line

Thanks & regards

I just checked the kernel source I have handy (2.6.11, Debian package) and it appears to offer parallel port support. The relevant modules are parport and parport_pc (the same as 2.4.x, I think ... it's been some years since I used a parallel port). You might try modprobe'ing these modules and see what results. If Slackware left them out of its standard modules package, I can't imagine why.

Thanks Ray and Hal,

modprobe lp, parport and parport_c did the trick.

I have to put the command now into rc.local. Isn't this odd?

I also found my Epson printer has even a serial outlet, but I have no cable.

Hal, Epson LQ 300 impact printer is still on sale here and for anyone who has no need for colored prints it is still the best buy. For $2.00 or half if I buy a refill ribbon only I can print 2 million characters . Beat that with an ink squirt printer. With the amount of printing I am doing in 6 months the higher purchasing cost of my Epson is more than paid for. All the computer stores here use Epson LQ 300 for invoicing etc. I guess they were the first to smell the racket of the industry selling those expensive ink cartridges.

Regards

Peter

Signature · 6 lines
Peter
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs