Skip to contentSkip to conversation

powerpc: Add FSL SEC node to documentation

PATCH In review Kim Phillips 6 participants 10 messages Mar 21, 2006 – Mar 25, 2006 Documentation

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc: Add FSL SEC node to documentation

Documentation: Added FSL SOC SEC node definition

Updated the documentation to include the definition of the SEC device node format for Freescale SOC devices.

---
commit 97d971c1d30e77a453cacaef72c32e00381ab02a
tree 4b815caece1c05b33309f8852eeccd90f020ca49
parent c4a1745aa09fc110afdefea0e5d025043e348bae
author Kim Phillips <[email protected]> Mon, 20 Mar 2006 19:31:21 -0600 committer Kim Phillips <[email protected]> Mon, 20 Mar 2006 19:31:21 -0600

 Documentation/powerpc/booting-without-of.txt |   73 ++++++++++++++++++++++++++
 1 files changed, 73 insertions(+), 0 deletions(-)
Documentation/powerpc/booting-without-of.txt +73 -0
index d02c649..72f3241 100644
@@ -1365,6 +1365,79 @@ platforms are moved over to use the flat
 	};
 
 
+   g) Freescale SOC SEC Security Engines
+
+   Required properties:
+
+    - device_type : Should be "crypto"
+    - model : Model of the device.  Should be "SEC1" or "SEC2"
+    - compatible : Should be "talitos"
+    - reg : Offset and length of the register set for the device
+    - interrupts : <a b> where a is the interrupt number and b is a
+      field that represents an encoding of the sense and level
+      information for the interrupt.  This should be encoded based on
+      the information in section 2) depending on the type of interrupt
+      controller you have.
+    - interrupt-parent : the phandle for the interrupt controller that
+      services interrupts for this device.
+    - num-channels : An integer representing the number of channels
+      available.  Most modern SEC's have 4 channels.
+    - channel-fifo-len : An integer representing the number of descriptor
+      pointers each channel fetch fifo can hold.  Most modern SEC channel 
+      fetch fifos can hold 24 descriptor pointers.
+    - exec-units-mask : The bitmask representing what execution units (EUs)
+      are available. It's a single 32 bit cell. EU information should be
+      encoded following the SEC's Descriptor Header Dword EU_SEL0 field 
+      documentation, i.e. as follows:
+
+        bit 0 = reserved - should be 0
+        bit 1 = set if SEC has the ARC4 EU (AFEU)
+        bit 2 = set if SEC has the DES/3DES EU (DEU)
+        bit 3 = set if SEC has the message digest EU (MDEU)
+        bit 4 = set if SEC has the random number generator EU (RNG)
+        bit 5 = set if SEC has the public key EU (PKEU)
+        bit 6 = set if SEC has the AES EU (AESU)
+        bit 7 = set if SEC has the Kasumi EU (KEU)
+
+      bits 8 through 31 are reserved for future SEC EUs.
+
+    - descriptor-types-mask : The bitmask representing what descriptors
+      are available. It's a single 32 bit cell. Descriptor type information 
+      should be encoded as follows:
+
+        bit 0  = set if SEC supports the aesu_ctr_nonsnoop descriptor type
+        bit 1  = set if SEC supports the ipsec_esp descriptor type
+        bit 2  = set if SEC supports the common_nonsnoop descriptor type
+        bit 3  = set if SEC supports the 802.11i AES ccmp descriptor type
+        bit 4  = set if SEC supports the hmac_snoop_no_afeu descriptor type
+        bit 5  = set if SEC supports the srtp descriptor type
+        bit 6  = reserved - should be 0
+        bit 7  = set if SEC supports the pkeu_assemble descriptor type
+        bit 8  = reserved - should be 0
+        bit 9  = set if SEC supports the pkeu_ptmul descriptor type
+        bit 10 = set if SEC supports the common_nonsnoop_afeu descriptor type
+        bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
+
+      ..and so on and so forth, following the SEC's Descriptor Header Dword
+      DESC_TYPE field definition in reference documentation.
+ 
+  Example:
+
+	/* MPC8548E */
+	crypto@30000 {
+		device_type = "crypto";
+		model = "SEC2";
+		compatible = "talitos";
+		reg = <30000 10000>;
+		interrupts = <1d 3>;
+		interrupt-parent = <40000>;
+		num-channels = <4>;
+		channel-fifo-len = <24>;
+		exec-units-mask = <000000fe>;
+		descriptor-types-mask = <073f1127>;
+	};
+
+
    More devices will be defined as this spec matures.
 
 
#1 lore raw

Review

Quoted 1 line · Kim Phillips
(quoted diff) +0 -0

b/Documentation/powerpc/booting-without-of.txt

Quoted 8 lines

index d02c649..72f3241 100644

Documentation/powerpc/booting-without-of.txt +0 -0
@@ -1365,6 +1365,79 @@ platforms are moved over to use the flat
 =A0=A0=A0=A0=A0=A0};

=A0
=A0
+ =A0 g) Freescale SOC SEC Security Engines

Documentation/powerpc/booting-without-of.txt

Quoted 6 lines
Documentation/powerpc/booting-without-of.txt +6 -0
+
+ =A0 Required properties:
+
+ =A0 =A0- device_type : Should be "crypto"
+ =A0 =A0- model : Model of the device. =A0Should be "SEC1" or "SEC2"
+ =A0 =A0- compatible : Should be "talitos"

[snip]

Have you consulted with any other vendors regarding these properties? I kno= w=20
there is no IEEE1275 binding for these sorts of devices, but we can at leas= t=20
attempt to standardize it (even in the absence of the Open Firmware Working= =20
Group)...

=2DHollis

#2 lore raw
Quoted 12 lines · On Mon, 20 Mar 2006 20:14:43 -0600 Hollis Blanchard <[email protected]>…

Review

Quoted 1 line · Kim Phillips
(quoted diff) +0 -0

b/Documentation/powerpc/booting-without-of.txt

Quoted 9 lines

index d02c649..72f3241 100644

Documentation/powerpc/booting-without-of.txt +0 -0
@@ -1365,6 +1365,79 @@ platforms are moved over to use the flat
 =A0=A0=A0=A0=A0=A0};

=A0
=A0
+ =A0 g) Freescale SOC SEC Security Engines
+

Quoted 8 lines
Quoted 5 lines

+ =A0 Required properties:
+
+ =A0 =A0- device_type : Should be "crypto"
+ =A0 =A0- model : Model of the device. =A0Should be "SEC1" or "SEC2"
+ =A0 =A0- compatible : Should be "talitos"

[snip]
=20
Have you consulted with any other vendors regarding these properties? I k=

now=20

Quoted 1 line

there is no IEEE1275 binding for these sorts of devices, but we can at le=

ast=20

Quoted 1 line

attempt to standardize it (even in the absence of the Open Firmware Worki=

ng=20

Quoted 3 lines

Group)...
=20
-Hollis

I took a look at some equivalent devices, the problem is they're all so dif= ferent, architecturally. otoh, I'm open to collaborate with others on the = list in an effort to standardize it.

btw, I had omitted some descriptor types. Here's a replacement patch:

Documentation: Added FSL SOC SEC node definition

Updated the documentation to include the definition of the SEC device node format for Freescale SOC devices.

---
commit 97d971c1d30e77a453cacaef72c32e00381ab02a
tree 4b815caece1c05b33309f8852eeccd90f020ca49
parent c4a1745aa09fc110afdefea0e5d025043e348bae
author Kim Phillips <[email protected]> Mon, 20 Mar 2006 19:31:21 = -0600
committer Kim Phillips <[email protected]> Mon, 20 Mar 2006 19:31:= 21 -0600

Documentation/powerpc/booting-without-of.txt | 73 ++++++++++++++++++++++=
++++

 1 files changed, 73 insertions(+), 0 deletions(-)
Documentation/p= renamed from Documentation/powerpc/booting-without-of.txt +0 -0

owerpc/booting-without-of.txt
index d02c649..72f3241 100644

Documentation/powerpc/booting-without-of.txt +0 -0
@@ -1365,6 +1365,79 @@ platforms are moved over to use the flat
 	};

=20
=20
+ g) Freescale SOC SEC Security Engines
+
+ Required properties:
+

+    - device_type : Should be "crypto"
+    - model : Model of the device.  Should be "SEC1" or "SEC2"
+    - compatible : Should be "talitos"
+    - reg : Offset and length of the register set for the device
+    - interrupts : <a b> where a is the interrupt number and b is a
+      field that represents an encoding of the sense and level
+      information for the interrupt.  This should be encoded based on
+      the information in section 2) depending on the type of interrupt
+      controller you have.

+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - num-channels : An integer representing the number of channels
+ available. Most modern SEC's have 4 channels.
+ - channel-fifo-len : An integer representing the number of descriptor
+ pointers each channel fetch fifo can hold. Most modern SEC channel=
=20
+ fetch fifos can hold 24 descriptor pointers.
+ - exec-units-mask : The bitmask representing what execution units (EUs)

+      are available. It's a single 32 bit cell. EU information should be
+      encoded following the SEC's Descriptor Header Dword EU_SEL0 field=20
+      documentation, i.e. as follows:
+
+        bit 0 =3D reserved - should be 0
+        bit 1 =3D set if SEC has the ARC4 EU (AFEU)
+        bit 2 =3D set if SEC has the DES/3DES EU (DEU)
+        bit 3 =3D set if SEC has the message digest EU (MDEU)
+        bit 4 =3D set if SEC has the random number generator EU (RNG)
+        bit 5 =3D set if SEC has the public key EU (PKEU)
+        bit 6 =3D set if SEC has the AES EU (AESU)
+        bit 7 =3D set if SEC has the Kasumi EU (KEU)

+
+ bits 8 through 31 are reserved for future SEC EUs.
+
+ - descriptor-types-mask : The bitmask representing what descriptors
+ are available. It's a single 32 bit cell. Descriptor type informatio=
n=20
+ should be encoded as follows:
+
+ bit 0 =3D set if SEC supports the aesu_ctr_nonsnoop descriptor ty=
pe

+        bit 1  =3D set if SEC supports the ipsec_esp descriptor type
+        bit 2  =3D set if SEC supports the common_nonsnoop descriptor type
+        bit 3  =3D set if SEC supports the 802.11i AES ccmp descriptor type
+        bit 4  =3D set if SEC supports the hmac_snoop_no_afeu descriptor t=
ype
+        bit 5  =3D set if SEC supports the srtp descriptor type
+        bit 6  =3D set if SEC supports the non_hmac_snoop_no_afeu descript=
or type
+        bit 7  =3D set if SEC supports the pkeu_assemble descriptor type
+        bit 8  =3D set if SEC supports the aesu_key_expand_output descript=

or type
+ bit 9 =3D set if SEC supports the pkeu_ptmul descriptor type
+ bit 10 =3D set if SEC supports the common_nonsnoop_afeu descriptor=
type
+ bit 11 =3D set if SEC supports the pkeu_ptadd_dbl descriptor type
+
+ ..and so on and so forth, following the SEC's Descriptor Header Dword
+ DESC_TYPE field definition in reference documentation.

+=20
+  Example:

+
+ /* MPC8548E */
+ crypto@30000 {
+ device_type =3D "crypto";
+ model =3D "SEC2";
+ compatible =3D "talitos";
+ reg =3D <30000 10000>;
+ interrupts =3D <1d 3>;
+ interrupt-parent =3D <40000>;
+ num-channels =3D <4>;
+ channel-fifo-len =3D <24>;
+ exec-units-mask =3D <000000fe>;
+ descriptor-types-mask =3D <073f1127>;
+ };
+
+
More devices will be defined as this spec matures.
=20
=20

--=20

#3 lore raw
Quoted 76 lines · Kim Phillips
Quoted 19 lines · On Mon, 20 Mar 2006 20:14:43 -0600 Hollis Blanchard <[email protected]>…

Review

Quoted 1 line · Kim Phillips
(quoted diff) +0 -0

b/Documentation/powerpc/booting-without-of.txt

Quoted 14 lines

index d02c649..72f3241 100644

Documentation/powerpc/booting-without-of.txt +7 -0
@@ -1365,6 +1365,79 @@ platforms are moved over to use the flat
      };
 
 
+   g) Freescale SOC SEC Security Engines
+
+   Required properties:
+
+    - device_type : Should be "crypto"
+    - model : Model of the device.  Should be "SEC1" or "SEC2"
+    - compatible : Should be "talitos"

[snip]

Quoted 6 lines

Have you consulted with any other vendors regarding these properties? I know there is no IEEE1275 binding for these sorts of devices, but we can at least attempt to standardize it (even in the absence of the Open Firmware Working Group)...

-Hollis

I took a look at some equivalent devices, the problem is they're all so different, architecturally. otoh, I'm open to collaborate with others on the list in an effort to standardize it.

btw, I had omitted some descriptor types. Here's a replacement patch:

Documentation: Added FSL SOC SEC node definition

Updated the documentation to include the definition of the SEC device node format for Freescale SOC devices.

---
commit 97d971c1d30e77a453cacaef72c32e00381ab02a
tree 4b815caece1c05b33309f8852eeccd90f020ca49
parent c4a1745aa09fc110afdefea0e5d025043e348bae
author Kim Phillips <[email protected]> Mon, 20 Mar 2006 19:31:21 -0600 committer Kim Phillips <[email protected]> Mon, 20 Mar 2006 19:31:21 -0600

 Documentation/powerpc/booting-without-of.txt |   73 +++++++++++++++ 
+++++++++++
 1 files changed, 73 insertions(+), 0 deletions(-)
Documentation/powerpc/booting-without-of.txt +12 -0
index d02c649..72f3241 100644
@@ -1365,6 +1365,79 @@ platforms are moved over to use the flat
 	};
 
 
+   g) Freescale SOC SEC Security Engines
+
+   Required properties:
+
+    - device_type : Should be "crypto"
+    - model : Model of the device.  Should be "SEC1" or "SEC2"
+    - compatible : Should be "talitos"
+    - reg : Offset and length of the register set for the device
+    - interrupts : <a b> where a is the interrupt number and b is a
+      field that represents an encoding of the sense and level
+      information for the interrupt.  This should be encoded based on
+      the information in section 2) depending on the type of  

interrupt

Documentation/powerpc/booting-without-of.txt +2 -0
+      controller you have.
+    - interrupt-parent : the phandle for the interrupt controller  

that

Documentation/powerpc/booting-without-of.txt

Quoted 3 lines
Documentation/powerpc/booting-without-of.txt +3 -0
+      services interrupts for this device.
+    - num-channels : An integer representing the number of channels
+      available.  Most modern SEC's have 4 channels.

Drop the part about Most modern... in five years when someone reads this it will not be modern anymore.

Quoted 5 lines

+ - channel-fifo-len : An integer representing the number of
descriptor
+ pointers each channel fetch fifo can hold. Most modern SEC
channel
+ fetch fifos can hold 24 descriptor pointers.

ditto about modern.

Quoted 48 lines

+ - exec-units-mask : The bitmask representing what execution
units (EUs)
+ are available. It's a single 32 bit cell. EU information
should be
+ encoded following the SEC's Descriptor Header Dword EU_SEL0
field

Documentation/powerpc/booting-without-of.txt +14 -0
+      documentation, i.e. as follows:
+
+        bit 0 = reserved - should be 0
+        bit 1 = set if SEC has the ARC4 EU (AFEU)
+        bit 2 = set if SEC has the DES/3DES EU (DEU)
+        bit 3 = set if SEC has the message digest EU (MDEU)
+        bit 4 = set if SEC has the random number generator EU (RNG)
+        bit 5 = set if SEC has the public key EU (PKEU)
+        bit 6 = set if SEC has the AES EU (AESU)
+        bit 7 = set if SEC has the Kasumi EU (KEU)
+
+      bits 8 through 31 are reserved for future SEC EUs.
+
+    - descriptor-types-mask : The bitmask representing what  

descriptors
+ are available. It's a single 32 bit cell. Descriptor type
information

Documentation/powerpc/booting-without-of.txt +3 -0
+      should be encoded as follows:
+
+        bit 0  = set if SEC supports the aesu_ctr_nonsnoop  

descriptor type

Documentation/powerpc/booting-without-of.txt +2 -0
+        bit 1  = set if SEC supports the ipsec_esp descriptor type
+        bit 2  = set if SEC supports the common_nonsnoop  

descriptor type
+ bit 3 = set if SEC supports the 802.11i AES ccmp
descriptor type
+ bit 4 = set if SEC supports the hmac_snoop_no_afeu
descriptor type

Documentation/powerpc/booting-without-of.txt +2 -0
+        bit 5  = set if SEC supports the srtp descriptor type
+        bit 6  = set if SEC supports the non_hmac_snoop_no_afeu  

descriptor type
+ bit 7 = set if SEC supports the pkeu_assemble descriptor
type
+ bit 8 = set if SEC supports the aesu_key_expand_output
descriptor type

Documentation/powerpc/booting-without-of.txt +2 -0
+        bit 9  = set if SEC supports the pkeu_ptmul descriptor type
+        bit 10 = set if SEC supports the common_nonsnoop_afeu  

descriptor type
+ bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor
type

Documentation/powerpc/booting-without-of.txt +2 -0
+
+      ..and so on and so forth, following the SEC's Descriptor  
Quoted 2 lines

Header Dword
+ DESC_TYPE field definition in reference documentation.

Would this be a bit more clear, if you explicitly stated that the DESC_TYPE value directly corresponds to the bit encoding, like you did for EU_SEL0.

Quoted 29 lines
Documentation/powerpc/booting-without-of.txt +18 -0
+
+  Example:
+
+	/* MPC8548E */
+	crypto@30000 {
+		device_type = "crypto";
+		model = "SEC2";
+		compatible = "talitos";
+		reg = <30000 10000>;
+		interrupts = <1d 3>;
+		interrupt-parent = <40000>;
+		num-channels = <4>;
+		channel-fifo-len = <24>;
+		exec-units-mask = <000000fe>;
+		descriptor-types-mask = <073f1127>;
+	};
+
+
    More devices will be defined as this spec matures.
Signature · 5 lines
-- 
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
#4 lore raw
Quoted 3 lines · On Tue, 21 Mar 2006 12:21:47 -0600 Kumar Gala <[email protected]> wrote:

Drop the part about Most modern... in five years when someone reads this it will not be modern anymore.

[snip]

Quoted 3 lines

ditto about modern.

[snip]

Quoted 5 lines

Would this be a bit more clear, if you explicitly stated that the DESC_TYPE value directly corresponds to the bit encoding, like you did for EU_SEL0.

[snip]

ok, here's the replacement replacement patch with the above fixes:

Documentation: Added FSL SOC SEC node definition

Updated the documentation to include the definition of the SEC device node format for Freescale SOC devices.

---
commit e1e1b8f7d958d7f25a0085ec529a3ebbd6dc1fa5
tree 2e2b12fe07b6d367da4c5609971178838c9321a2
parent 6b0efd3e3b07afc9fc7222066b0b37ecd1d31e44
author Kim Phillips <[email protected]> Tue, 21 Mar 2006 16:43:16 -0600 committer Kim Phillips <[email protected]> Tue, 21 Mar 2006 16:43:16 -0600

 Documentation/powerpc/booting-without-of.txt |   72 ++++++++++++++++++++++++++
 1 files changed, 72 insertions(+), 0 deletions(-)
Documentation/powerpc/booting-without-of.txt +72 -0
index d02c649..d6626b6 100644
@@ -1365,6 +1365,78 @@ platforms are moved over to use the flat
        };
 
 
+   g) Freescale SOC SEC Security Engines
+
+   Required properties:
+
+    - device_type : Should be "crypto"
+    - model : Model of the device.  Should be "SEC1" or "SEC2"
+    - compatible : Should be "talitos"
+    - reg : Offset and length of the register set for the device
+    - interrupts : <a b> where a is the interrupt number and b is a
+      field that represents an encoding of the sense and level
+      information for the interrupt.  This should be encoded based on
+      the information in section 2) depending on the type of interrupt
+      controller you have.
+    - interrupt-parent : the phandle for the interrupt controller that
+      services interrupts for this device.
+    - num-channels : An integer representing the number of channels
+      available.
+    - channel-fifo-len : An integer representing the number of
+      descriptor pointers each channel fetch fifo can hold.
+    - exec-units-mask : The bitmask representing what execution units
+      (EUs) are available. It's a single 32 bit cell. EU information
+      should be encoded following the SEC's Descriptor Header Dword
+      EU_SEL0 field documentation, i.e. as follows:
+
+        bit 0 = reserved - should be 0
+        bit 1 = set if SEC has the ARC4 EU (AFEU)
+        bit 2 = set if SEC has the DES/3DES EU (DEU)
+        bit 3 = set if SEC has the message digest EU (MDEU)
+        bit 4 = set if SEC has the random number generator EU (RNG)
+        bit 5 = set if SEC has the public key EU (PKEU)
+        bit 6 = set if SEC has the AES EU (AESU)
+        bit 7 = set if SEC has the Kasumi EU (KEU)
+
+      bits 8 through 31 are reserved for future SEC EUs.
+
+    - descriptor-types-mask : The bitmask representing what descriptors
+      are available. It's a single 32 bit cell. Descriptor type
+      information should be encoded following the SEC's Descriptor
+      Header Dword DESC_TYPE field documentation, i.e. as follows:
+
+        bit 0  = set if SEC supports the aesu_ctr_nonsnoop desc. type
+        bit 1  = set if SEC supports the ipsec_esp descriptor type
+        bit 2  = set if SEC supports the common_nonsnoop desc. type
+        bit 3  = set if SEC supports the 802.11i AES ccmp desc. type
+        bit 4  = set if SEC supports the hmac_snoop_no_afeu desc. type
+        bit 5  = set if SEC supports the srtp descriptor type
+        bit 6  = set if SEC supports the non_hmac_snoop_no_afeu desc.type
+        bit 7  = set if SEC supports the pkeu_assemble descriptor type
+        bit 8  = set if SEC supports the aesu_key_expand_output desc.type
+        bit 9  = set if SEC supports the pkeu_ptmul descriptor type
+        bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type
+        bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
+
+      ..and so on and so forth.
+
+  Example:
+
+       /* MPC8548E */
+       crypto@30000 {
+               device_type = "crypto";
+               model = "SEC2";
+               compatible = "talitos";
+               reg = <30000 10000>;
+               interrupts = <1d 3>;
+               interrupt-parent = <40000>;
+               num-channels = <4>;
+               channel-fifo-len = <24>;
+               exec-units-mask = <000000fe>;
+               descriptor-types-mask = <073f1127>;
+       };
+
+
    More devices will be defined as this spec matures.
#5 lore raw
Quoted 1 line · Kim Phillips

ok, here's the replacement replacement patch with the above fixes:

Unfortunately your mailer wrecked the whitespace and it doesn't apply. Please resend with a better mailer.

Thanks,
Paul.

#6 lore raw
In reply to Hollis Blanchard
Quoted 19 lines · Hollis Blanchard

Review

Quoted 1 line · Kim Phillips
(quoted diff) +0 -0

b/Documentation/powerpc/booting-without-of.txt

Quoted 14 lines

index d02c649..72f3241 100644

Documentation/powerpc/booting-without-of.txt +7 -0
@@ -1365,6 +1365,79 @@ platforms are moved over to use the flat
      };
 
 
+   g) Freescale SOC SEC Security Engines
+
+   Required properties:
+
+    - device_type : Should be "crypto"
+    - model : Model of the device.  Should be "SEC1" or "SEC2"
+    - compatible : Should be "talitos"

[snip]

Quoted 4 lines

Have you consulted with any other vendors regarding these properties? I know there is no IEEE1275 binding for these sorts of devices, but we can at least attempt to standardize it (even in the absence of the Open Firmware Working Group)...

Beyond the device_type, I'm not sure if there is much more one could standardize one. The other fields that Kim spec'd are either generic OF fields (reg, interrupts, etc.) or specific to the Freescale devices.

- kumar

#7 lore raw
Quoted 29 lines · Kumar Gala
Quoted 19 lines · Hollis Blanchard

Review

Quoted 1 line · Kim Phillips
(quoted diff) +0 -0

b/Documentation/powerpc/booting-without-of.txt

Quoted 14 lines

index d02c649..72f3241 100644

Documentation/powerpc/booting-without-of.txt +7 -0
@@ -1365,6 +1365,79 @@ platforms are moved over to use the flat
      };
 
 
+   g) Freescale SOC SEC Security Engines
+
+   Required properties:
+
+    - device_type : Should be "crypto"
+    - model : Model of the device.  Should be "SEC1" or "SEC2"
+    - compatible : Should be "talitos"

[snip]

Quoted 7 lines

Have you consulted with any other vendors regarding these properties? I know
there is no IEEE1275 binding for these sorts of devices, but we can at least
attempt to standardize it (even in the absence of the Open Firmware Working
Group)...

Quoted 3 lines

Beyond the device_type, I'm not sure if there is much more one could standardize one. The other fields that Kim spec'd are either generic OF fields (reg, interrupts, etc.) or specific to the Freescale devices.

The device_type and compatible properties are exactly what I'm talking about.

-Hollis

#8 lore raw
Quoted 11 lines · Hollis Blanchard
Quoted 10 lines · Kumar Gala
Quoted 7 lines · Hollis Blanchard

Have you consulted with any other vendors regarding these properties? I know
there is no IEEE1275 binding for these sorts of devices, but we can at least
attempt to standardize it (even in the absence of the Open Firmware Working
Group)...

Quoted 6 lines
Quoted 3 lines

Beyond the device_type, I'm not sure if there is much more one could standardize one. The other fields that Kim spec'd are either generic OF fields (reg, interrupts, etc.) or specific to the Freescale devices.

The device_type and compatible properties are exactly what I'm talking about.

The Working Group lists still exist but are pretty dead. I agree we really want to ensure that both OF based and dtc based new hardware is consistent. I'm not sure how we want to do this, but we can document in Documentation and then use eg SLOF to mock out the OF interfaces and create proposals and kick some life into the OF working group.

Paul

#9 lore raw
Quoted 16 lines · Paul Nasrat
Quoted 15 lines · Hollis Blanchard
Quoted 13 lines · Kumar Gala
Quoted 7 lines · Hollis Blanchard

Have you consulted with any other vendors regarding these properties? I know
there is no IEEE1275 binding for these sorts of devices, but we can at least
attempt to standardize it (even in the absence of the Open Firmware Working
Group)...

Beyond the device_type, I'm not sure if there is much more one could standardize one. The other fields that Kim spec'd are either generic OF fields (reg, interrupts, etc.) or specific to the Freescale devices.

Quoted 8 lines
Quoted 2 lines

The device_type and compatible properties are exactly what I'm talking about.

The Working Group lists still exist but are pretty dead. I agree we really want to ensure that both OF based and dtc based new hardware is consistent. I'm not sure how we want to do this, but we can document in Documentation and then use eg SLOF to mock out the OF interfaces and create proposals and kick some life into the OF working group.

Sorry for the delayed reply, my procmail filter was pumping mails to the old list name without telling me. :)

Other than IBM, Motorola, and possibly Sun, what groups are using OFW on new platforms anymore?

Power.org may be a vehicle to publish.

The Power TSC leader indicated a willingness to look into a process to get out some purely internal bindings (at the moment) that _really_ need some fresh air to flourish.

++doug