s390: minor claw driver fix
Subsystems (4)
PATCH 1/6 s390: minor claw driver fix
Hi ,
following 6 patches are for s390 network drivers claw, qeth and ctc.
tty support will be removed from the ctc network device driver , which will happen with patch 5/6 and 6/6 . The latter one will remove two files , ctctty.c and ctctty.h .
Thanks
Frank
[patch 1/6] s390: minor claw driver fix
From: Frank Pavlic <[email protected]>
use CONFIG_ARCH_S390X instead of CONFIG_64BIT in function dumpit .
diffstat:
claw.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
drivers/s390/net/claw.c +3 -3
@@ -1601,7 +1601,7 @@ dumpit(char* buf, int len)__u32 ct, sw, rm, dup;char *ptr, *rptr;char tbuf[82 ], tdup[82 ]; -#if (CONFIG_64BIT ) +#if (CONFIG_ARCH_S390X )char addr[22 ];#else char addr[12 ];
@@ -1617,7 +1617,7 @@ dumpit(char* buf, int len) dup =0 ;for ( ct=0 ; ct < len; ct++, ptr++, rptr++ ) {if (sw ==0 ) { -#if (CONFIG_64BIT ) +#if (CONFIG_ARCH_S390X )sprintf (addr,"%16.16lX" ,(unsigned long )rptr);#else sprintf (addr,"%8.8X" ,(__u32 )rptr);
@@ -1632,7 +1632,7 @@ dumpit(char* buf, int len)if (sw ==8 ) {strcat (bhex," " ); } -#if (CONFIG_64BIT ) +#if (CONFIG_ARCH_S390X )sprintf (tbuf,"%2.2lX" , (unsigned long )*ptr);#else sprintf (tbuf,"%2.2X" , (__u32)*ptr);
Quoted 5 lines · Frank Pavlic
[patch 1/6] s390: minor claw driver fix
From: Frank Pavlic <[email protected]>
use
CONFIG_ARCH_S390Xinstead ofCONFIG_64BITin function dumpit .
Nack. CONFIG_ARCH_S390X doesn't exists anymore. It has been replaced by CONFIG_64BIT in 2.6.16.
--
blue skies,
Martin
Quoted 5 lines · On Wed, 22 Mar 2006 16:42:14 +0100 "Martin Schwidefsky"…
Quoted 4 lines · Frank Pavlic
[patch 1/6] s390: minor claw driver fix
From: Frank Pavlic <[email protected]>
Quoted 8 lines
Quoted 1 line
use
CONFIG_ARCH_S390Xinstead ofCONFIG_64BITin function dumpit .Nack.
CONFIG_ARCH_S390Xdoesn't exists anymore. It has been replaced byCONFIG_64BITin 2.6.16.--
blue skies,
Martin
oh boy , you are absolutely right , did take the wrong kernel level for making this patch . it was just before you did the upgrade to 2.6.16 :-(..
Jeff please don't apply this one ...the rest [2/6] - [6/6] is ok ...
Frank