Skip to contentSkip to conversation

ACPI error in 2.6.16

DISCUSSION Francesco Biscani 3 participants 3 messages Mar 22, 2006 – Mar 23, 2006 ACPI

lore
Share & tools
lore

Francesco Biscani

author
#0 lore raw

Hello,

sometimes at boot I get the following from the logs:

ACPI: write EC, IB not empty
ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for [EmbeddedControl] [20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.ISA_.EC0_.SMRD] (Node c13ecd40), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.UPBI] (Node dbf42720), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.CHBP] (Node dbf42660), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.ISA_.EC0_.SMSL] (Node c13ecce0), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.ISA_.EC0_._Q09] (Node c13ecc40), AE_TIME

And after that the battery is reported as absent (even if it is physically present). I get the impression that this happens when rebooting, not from "cold powerons".

This did not happen in 2.6.15, it appeared somewhere in 2.6.16-rc series.

Regards,

Francesco

Signature · 4 lines
Dr. Francesco Biscani
Dipartimento di Astronomia
Università di Padova
[email protected]
#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Francesco Biscani napsal(a):

Quoted 18 lines

Hello,

sometimes at boot I get the following from the logs:

ACPI: write EC, IB not empty
ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for [EmbeddedControl] [20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.ISA_.EC0_.SMRD] (Node c13ecd40), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.UPBI] (Node dbf42720), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.CHBP] (Node dbf42660), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.ISA_.EC0_.SMSL] (Node c13ecce0), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.ISA_.EC0_._Q09] (Node c13ecc40), AE_TIME

Quoted 5 lines

And after that the battery is reported as absent (even if it is physically present). I get the impression that this happens when rebooting, not from "cold powerons".

This did not happen in 2.6.15, it appeared somewhere in 2.6.16-rc series.

Could you post dmesgs of both, acpidump and .config? Could you bisect them?

regards,
- --
Jiri Slaby www.fi.muni.cz/~xslaby
~\-/~ [email protected] ~\-/~
B67499670407CE62ACC8 22A032CC55C339D47A7E -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org

iD8DBQFEIfg0MsxVwznUen4RApQaAKCRk+LUG+wasgLbeiNqAsfxyUsB0ACgkpNY y23B68tNzhfKTCnEc+EYOTo=
=HjEW
-----END PGP SIGNATURE-----

#2 lore raw
Quoted 23 lines · Jiri Slaby

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Francesco Biscani napsal(a):

Quoted 18 lines

Hello,

sometimes at boot I get the following from the logs:

ACPI: write EC, IB not empty
ACPI Exception (evregion-0409): AE_TIME, Returned by Handler for [EmbeddedControl] [20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.ISA_.EC0_.SMRD] (Node c13ecd40), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.UPBI] (Node dbf42720), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.BAT1.CHBP] (Node dbf42660), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.ISA_.EC0_.SMSL] (Node c13ecce0), AE_TIME
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.ISA_.EC0_._Q09] (Node c13ecc40), AE_TIME

Quoted 7 lines
Quoted 5 lines

And after that the battery is reported as absent (even if it is physically present). I get the impression that this happens when rebooting, not from "cold powerons".

This did not happen in 2.6.15, it appeared somewhere in 2.6.16-rc series.

Could you post dmesgs of both, acpidump and .config? Could you bisect them?

And please Cc: [email protected], thanks.