Skip to contentSkip to conversation

w83627ehf: Add voltage inputs support

PATCH New Jean Delvare 3 participants 3 messages Mar 23, 2006 – Mar 25, 2006 Hardware monitoring

lore
Share & tools
lore
#0 lore raw

PATCH 2/10 w83627ehf: Add voltage inputs support

From: Rudolf Marek <r.marek at sh.cvut.cz>
Content-Disposition: inline; filename=hwmon-w83627ehf-add-voltages.patch

Add the voltage measuring support to W83627EHF. The code is based on the patch provided by Yuan Mu from Winbond.

Signed-off-by Yuan Mu <Ymu at winbond.com.tw>
Signed-off-by Rudolf Marek <r.marek at sh.cvut.cz>
Signed-off-by Jean Delvare <khali at linux-fr.org>
---
 drivers/hwmon/w83627ehf.c |  122 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 119 insertions(+), 3 deletions(-)
drivers/hwmon/w83627ehf.c +120 -4
@@ -30,10 +30,7 @@
     Supports the following chips:
 
     Chip        #vin    #fan    #pwm    #temp   chip_id man_id
-    w83627ehf   -       5       -       3       0x88    0x5ca3
-
-    This is a preliminary version of the driver, only supporting the
-    fan and temperature inputs. The chip does much more than that.
+    w83627ehf   10      5       -       3       0x88    0x5ca3
 */
 
 #include <linux/module.h>
@@ -121,6 +118,14 @@
 static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 };
 static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c };
 
+/* The W83627EHF registers for nr=7,8,9 are in bank 5 */
+#define W83627EHF_REG_IN_MAX(nr)	((nr < 7) ? (0x2b + (nr) * 2) : \
+					 (0x554 + (((nr) - 7) * 2)))
+#define W83627EHF_REG_IN_MIN(nr)	((nr < 7) ? (0x2c + (nr) * 2) : \
+					 (0x555 + (((nr) - 7) * 2)))
+#define W83627EHF_REG_IN(nr)		((nr < 7) ? (0x20 + (nr)) : \
+					 (0x550 + (nr) - 7))
+
 #define W83627EHF_REG_TEMP1		0x27
 #define W83627EHF_REG_TEMP1_HYST	0x3a
 #define W83627EHF_REG_TEMP1_OVER	0x39
@@ -172,6 +177,20 @@
 	return (temp + 500) / 1000;
 }
 
+/* Some of analog inputs have internal scaling (2x), 8mV is ADC LSB */
+
+static u8 scale_in[10] = { 8, 8, 16, 16, 8, 8, 8, 16, 16, 8 };
+
+static inline long in_from_reg(u8 reg, u8 nr)
+{
+	return reg * scale_in[nr];
+}
+
+static inline u8 in_to_reg(u32 val, u8 nr)
+{
+	return SENSORS_LIMIT(((val + (scale_in[nr] / 2)) / scale_in[nr]), 0, 255);
+}
+
 /*
  * Data structures and manipulation thereof
  */
@@ -186,6 +205,9 @@
 	unsigned long last_updated;	/* In jiffies */
 
 	/* Register values */
+	u8 in[10];		/* Register value */
+	u8 in_max[10];		/* Register value */
+	u8 in_min[10];		/* Register value */
 	u8 fan[5];
 	u8 fan_min[5];
 	u8 fan_div[5];
@@ -349,6 +371,16 @@
 			data->fan_div[3] |= (i >> 5) & 0x04;
 		}
 
+		/* Measured voltages and limits */
+		for (i = 0; i < 10; i++) {
+			data->in[i] = w83627ehf_read_value(client,
+				      W83627EHF_REG_IN(i));
+			data->in_min[i] = w83627ehf_read_value(client,
+					  W83627EHF_REG_IN_MIN(i));
+			data->in_max[i] = w83627ehf_read_value(client,
+					  W83627EHF_REG_IN_MAX(i));
+		}
+
 		/* Measured fan speeds and limits */
 		for (i = 0; i < 5; i++) {
 			if (!(data->has_fan & (1 << i)))
@@ -406,6 +438,87 @@
 /*
  * Sysfs callback functions
  */
+#define show_in_reg(reg) \
+static ssize_t \
+show_##reg(struct device *dev, struct device_attribute *attr, \
+	   char *buf) \
+{ \
+	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	int nr = sensor_attr->index; \
+	return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr)); \
+}
+show_in_reg(in)
+show_in_reg(in_min)
+show_in_reg(in_max)
+
+#define store_in_reg(REG, reg) \
+static ssize_t \
+store_in_##reg (struct device *dev, struct device_attribute *attr, \
+			const char *buf, size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627ehf_data *data = i2c_get_clientdata(client); \
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	int nr = sensor_attr->index; \
+	u32 val = simple_strtoul(buf, NULL, 10); \
+ \
+	mutex_lock(&data->update_lock); \
+	data->in_##reg[nr] = in_to_reg(val, nr); \
+	w83627ehf_write_value(client, W83627EHF_REG_IN_##REG(nr), \
+			      data->in_##reg[nr]); \
+	mutex_unlock(&data->update_lock); \
+	return count; \
+}
+
+store_in_reg(MIN, min)
+store_in_reg(MAX, max)
+
+static struct sensor_device_attribute sda_in_input[] = {
+	SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
+	SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
+	SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
+	SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
+	SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
+	SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
+	SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
+	SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
+	SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8),
+	SENSOR_ATTR(in9_input, S_IRUGO, show_in, NULL, 9),
+};
+
+static struct sensor_device_attribute sda_in_min[] = {
+       SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0),
+       SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1),
+       SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2),
+       SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3),
+       SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4),
+       SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5),
+       SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6),
+       SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7),
+       SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8),
+       SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 9),
+};
+
+static struct sensor_device_attribute sda_in_max[] = {
+       SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0),
+       SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1),
+       SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2),
+       SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3),
+       SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4),
+       SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5),
+       SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6),
+       SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7),
+       SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8),
+       SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9),
+};
+
+static void device_create_file_in(struct device *dev, int i)
+{
+	device_create_file(dev, &sda_in_input[i].dev_attr);
+	device_create_file(dev, &sda_in_min[i].dev_attr);
+	device_create_file(dev, &sda_in_max[i].dev_attr);
+}
 
 #define show_fan_reg(reg) \
 static ssize_t \
@@ -705,6 +818,9 @@
 		goto exit_detach;
 	}
 
+	for (i = 0; i < 10; i++)
+		device_create_file_in(dev, i);
+
 	for (i = 0; i < 5; i++) {
 		if (data->has_fan & (1 << i))
 			device_create_file_fan(dev, i);
Signature · 1 line
Jean Delvare
#1 lore raw

PATCH 2/10 w83627ehf: Add voltage inputs support

Hi all:

Quoted 6 lines · Jean Delvare

From: Rudolf Marek <r.marek at sh.cvut.cz>
Content-Disposition: inline; filename=hwmon-w83627ehf-add-voltages.patch

Add the voltage measuring support to W83627EHF. The code is based on the patch provided by Yuan Mu from Winbond.

[snip]

drivers/hwmon/w83627ehf.c line 192

Quoted 4 lines
drivers/hwmon/w83627ehf.c +4 -0
+static inline u8 in_to_reg(u32 val, u8 nr)
+{
+	return SENSORS_LIMIT(((val + (scale_in[nr] / 2)) / scale_in[nr]), 0, 255);
+}

This reminds me... it seems that static inlines (outside of header files) are discouraged now - see chapter 14 of CodingStyle. It would be pointless to take them all out of drivers/hwmon/*.c now, but we probably shouldn't add any more of them.

Regards,

Signature · 2 lines
Mark M. Hoffman
mhoffman at lightlink.com
#2 lore raw

PATCH 2/10 w83627ehf: Add voltage inputs support

In reply to Jean Delvare
Quoted 12 lines · Mark M. Hoffman

Hi all:

Quoted 6 lines · Jean Delvare

From: Rudolf Marek <r.marek at sh.cvut.cz>
Content-Disposition: inline; filename=hwmon-w83627ehf-add-voltages.patch

Add the voltage measuring support to W83627EHF. The code is based on the patch provided by Yuan Mu from Winbond.

[snip]

Quoted 9 lines

drivers/hwmon/w83627ehf.c line 192

Quoted 4 lines
drivers/hwmon/w83627ehf.c +4 -0
+static inline u8 in_to_reg(u32 val, u8 nr)
+{
+	return SENSORS_LIMIT(((val + (scale_in[nr] / 2)) / scale_in[nr]), 0, 255);
+}

This reminds me... it seems that static inlines (outside of header files) are discouraged now - see chapter 14 of CodingStyle. It would be pointless to take them all out of drivers/hwmon/*.c now, but we probably shouldn't add any more of them.

Yeah, especially for stuff like this that it doesn't make sense to inline as there's no speed benifit, and only code bloat :)

thanks,

greg k-h