Linux 2.6.16.1
Subsystems (18)
We (the -stable team) are announcing the release of the 2.6.16.1 kernel.
The diffstat and short summary of the fixes are below.
I'll also be replying to this message with a copy of the patch between 2.6.16 and 2.6.16.1, as it is small enough to do so.
The updated 2.6.16.y git tree can be found at:
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.15.y.git
and can be browsed at the normal kernel.org git web browser:
www.kernel.org/git/
thanks,
greg k-h
--------
Makefile | 2 - arch/i386/kernel/cpu/cpufreq/speedstep-smi.c | 4 +- arch/i386/kernel/dmi_scan.c | 2 - drivers/base/cpu.c | 2 - drivers/base/firmware_class.c | 6 ++- drivers/block/cciss.c | 2 - drivers/md/dm.c | 45 +++++++++++++++------------ drivers/media/video/Kconfig | 1 drivers/media/video/tuner-types.c | 4 +- drivers/scsi/sata_mv.c | 7 +++- drivers/video/i810/i810_main.c | 2 - fs/9p/vfs_inode.c | 3 - fs/proc/proc_misc.c | 2 - fs/sysfs/dir.c | 1 fs/sysfs/inode.c | 6 +++ fs/sysfs/symlink.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 2 - include/linux/cpu.h | 2 - include/linux/raid/raid1.h | 2 - include/linux/rtc.h | 4 +- kernel/sched.c | 9 ++++- net/core/sock.c | 5 +-- net/ipv4/ip_output.c | 6 --- 23 files changed, 70 insertions(+), 50 deletions(-)
Summary of changes from v2.6.16 to v2.6.16.1
============================================
Alasdair G Kergon:
dm: bio split bvec fix
Alexey Kuznetsov:
TCP: Do not use inet->id of global tcp_socket when sending RST (CVE-2006-1242)
Andrew Morton:
get_cpu_sysdev() signedness fix
Fix speedstep-smi assembly bug in speedstep_smi_ownership
Andrey Panin:
DMI: fix DMI onboard device discovery
Anton Blanchard:
fix scheduler deadlock
Antonino A. Daplas:
i810fb_cursor(): use GFP_ATOMIC
David S. Miller:
NET: Ensure device name passed to SO_BINDTODEVICE is NULL terminated.
Greg Kroah-Hartman:
sysfs: sysfs_remove_dir() needs to invalidate the dentry
sysfs: fix a kobject leak in sysfs_add_link on the error path Linux 2.6.16.1
Hans Verkuil:
V4L/DVB (3324): Fix Samsung tuner frequency ranges
Jeff Garzik:
sata_mv: fix irq port status usage
Jeff Moyer:
firmware: fix BUG: in fw_realloc_buffer
Joe Korty:
rtc.h broke strace(1) builds
Latchesar Ionkov:
v9fs: assign dentry ops to negative dentries
Mark Lord:
2.6.xx: sata_mv: another critical fix
Michael Krufky:
Kconfig: VIDEO_DECODER must select FW_LOADER
Nathan Scott:
XFS writeout fix
Neil Brown:
DM: Fix bug: BIO_RW_BARRIER requests to md/raid1 hang.
Neil Horman:
proc: fix duplicate line in /proc/devices
Patrick McHardy:
cciss: fix use-after-free in cciss_init_one
Makefile +1 -1
@@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 16 -EXTRAVERSION = +EXTRAVERSION = .1 NAME=Sliding Snow Leopard # *DOCUMENTATION*
arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +3 -1
@@ -75,7 +75,9 @@ static int speedstep_smi_ownership (void __asm__ __volatile__("out %%al, (%%dx)\n" :"=D" (result) - :"a" (command),"b" (function),"c" (0 ),"d" (smi_port),"D" (0 ),"S" (magic) + :"a" (command),"b" (function),"c" (0 ),"d" (smi_port), +"D" (0 ),"S" (magic) + :"memory" );dprintk ("result is %x\n" , result);
arch/i386/kernel/dmi_scan.c +1 -1
@@ -106,7 +106,7 @@ static void __init dmi_save_devices(strustruct dmi_device *dev;for (i =0 ; i < count; i++) { -char *d = ((char *) dm) + (i *2 ); +char *d = (char *)(dm +1 ) + (i *2 );/* Skip disabled device */ if ((*d &0x80 ) ==0 )
drivers/base/cpu.c +1 -1
@@ -141,7 +141,7 @@ int __devinit register_cpu(struct cpu *creturn error; } -struct sys_device *get_cpu_sysdev (int cpu) +struct sys_device *get_cpu_sysdev (unsigned cpu) {if (cpu <NR_CPUS )return cpu_sys_devices[cpu];
drivers/base/firmware_class.c +4 -2
@@ -211,18 +211,20 @@ static int fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size) {u8 *new_data; +int new_size = fw_priv->alloc_size;if (min_size <= fw_priv->alloc_size)return 0 ; - new_data =vmalloc (fw_priv->alloc_size +PAGE_SIZE ); + new_size =ALIGN (min_size,PAGE_SIZE ); + new_data =vmalloc (new_size);if (!new_data) {printk (KERN_ERR "%s: unable to alloc buffer\n" , __FUNCTION__);/* Make sure that we don't keep incomplete data */ fw_load_abort (fw_priv);return -ENOMEM ; } - fw_priv->alloc_size +=PAGE_SIZE ; + fw_priv->alloc_size = new_size;if (fw_priv->fw->data) {memcpy (new_data, fw_priv->fw->data, fw_priv->fw->size);vfree (fw_priv->fw->data);
drivers/block/cciss.c +1 -1
@@ -3269,8 +3269,8 @@ clean2:unregister_blkdev (hba[i]->major, hba[i]->devname); clean1:release_io_mem (hba[i]); -free_hba (i); hba[i]->busy_initializing =0 ; +free_hba (i);return (-1 ); }
drivers/md/dm.c +25 -20
55 lines not on this page · raw message
drivers/media/video/Kconfig +1 -0
@@ -349,6 +349,7 @@ config VIDEO_AUDIO_DECODER config VIDEO_DECODER tristate "Add support for additional video chipsets" depends on VIDEO_DEV && I2C && EXPERIMENTAL + select FW_LOADER ---help--- Say Y here to compile drivers for SAA7115, SAA7127 and CX25840 video decoders.
drivers/media/video/tuner-types.c +2 -2
@@ -1087,8 +1087,8 @@ static struct tuner_params tuner_tnf_533/* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */ static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = { - {16 *175.75 /*MHz*/ ,0x01 , }, - {16 *410.25 /*MHz*/ ,0x02 , }, + {16 *130.00 /*MHz*/ ,0x01 , }, + {16 *364.50 /*MHz*/ ,0x02 , }, {16 *999.99 ,0x08 , }, };
drivers/scsi/sata_mv.c +5 -2
@@ -1102,6 +1102,7 @@ static u8 mv_get_crpb_status(struct ata_void __iomem *port_mmio =mv_ap_base (ap);struct mv_port_priv *pp = ap->private_data;u32 out_ptr; +u8 ata_status; out_ptr =readl (port_mmio +EDMA_RSP_Q_OUT_PTR_OFS );
@@ -1109,6 +1110,8 @@ static u8 mv_get_crpb_status(struct ata_assert (((out_ptr >>EDMA_RSP_Q_PTR_SHIFT ) &MV_MAX_Q_DEPTH_MASK ) == pp->rsp_consumer); + ata_status = pp->crpb[pp->rsp_consumer].flags >>CRPB_FLAG_STATUS_SHIFT ; +/* increment our consumer index... */ pp->rsp_consumer =mv_inc_q_index (&pp->rsp_consumer);
@@ -1123,7 +1126,7 @@ static u8 mv_get_crpb_status(struct ata_writelfl (out_ptr, port_mmio +EDMA_RSP_Q_OUT_PTR_OFS );/* Return ATA status register for completed CRPB */ -return (pp->crpb[pp->rsp_consumer].flags >>CRPB_FLAG_STATUS_SHIFT ); +return ata_status; }/**
@@ -1192,7 +1195,6 @@ static void mv_host_intr(struct ata_hostu32 hc_irq_cause;int shift, port, port0, hard_port, handled;unsigned int err_mask; -u8 ata_status =0 ;if (hc ==0 ) { port0 =0 ;
@@ -1210,6 +1212,7 @@ static void mv_host_intr(struct ata_host hc,relevant,hc_irq_cause);for (port = port0; port < port0 +MV_PORTS_PER_HC ; port++) { +u8 ata_status =0 ; ap = host_set->ports[port]; hard_port = port &MV_PORT_MASK ;/* range 0-3 */ handled =0 ;/* ensure ata_status is set if handled++ */
drivers/video/i810/i810_main.c +1 -1
@@ -1508,7 +1508,7 @@ static int i810fb_cursor(struct fb_infoint size = ((cursor->image.width +7 ) >>3 ) * cursor->image.height;int i; -u8 *data =kmalloc (64 *8 ,GFP_KERNEL ); +u8 *data =kmalloc (64 *8 ,GFP_ATOMIC );if (data ==NULL )return -ENOMEM ;
fs/9p/vfs_inode.c +1 -2
@@ -614,6 +614,7 @@ static struct dentry *v9fs_vfs_lookup(st sb = dir->i_sb; v9ses =v9fs_inode2v9ses (dir); + dentry->d_op = &v9fs_dentry_operations; dirfid =v9fs_fid_lookup (dentry->d_parent);if (!dirfid) {
@@ -681,8 +682,6 @@ static struct dentry *v9fs_vfs_lookup(st goto FreeFcall; fid->qid = fcall->params.rstat.stat.qid; - - dentry->d_op = &v9fs_dentry_operations;v9fs_stat2inode (&fcall->params.rstat.stat, inode, inode->i_sb);d_add (dentry, inode);
fs/proc/proc_misc.c +1 -1
@@ -312,7 +312,7 @@ static void *devinfo_next(struct seq_filcase BLK_HDR : info->state =BLK_LIST ; (*pos)++; -break ; +/*fallthrough*/ case BLK_LIST :if (get_blkdev_info (info->blkdev,&idummy,&ndummy)) {/*
fs/sysfs/dir.c +1 -0
@@ -302,6 +302,7 @@ void sysfs_remove_dir(struct kobject * k* Drop reference from dget() on entrance. */ dput (dentry); + kobj->dentry =NULL ; }int sysfs_rename_dir (struct kobject * kobj,const char *new_name)
fs/sysfs/inode.c +5 -1
@@ -227,12 +227,16 @@ void sysfs_drop_dentry(struct sysfs_direvoid sysfs_hash_and_remove (struct dentry * dir,const char * name) {struct sysfs_dirent * sd; -struct sysfs_dirent * parent_sd = dir->d_fsdata; +struct sysfs_dirent * parent_sd; + +if (!dir) +return ;if (dir->d_inode ==NULL )/* no inode means this hasn't been made visible yet */ return ; + parent_sd = dir->d_fsdata;mutex_lock (&dir->d_inode->i_mutex);list_for_each_entry (sd, &parent_sd->s_children, s_sibling) {if (!sd->s_element)
fs/sysfs/symlink.c +1 -0
@@ -66,6 +66,7 @@ static int sysfs_add_link(struct dentryif (!error)return 0 ; +kobject_put (target);kfree (sl->link_name); exit2:kfree (sl);
fs/xfs/linux-2.6/xfs_aops.c +1 -1
@@ -616,7 +616,7 @@ xfs_is_delayed_page( acceptable = (type ==IOMAP_UNWRITTEN ); else if (buffer_delay(bh)) acceptable = (type ==IOMAP_DELAY ); - else if (buffer_mapped(bh)) + else if (buffer_dirty(bh) && buffer_mapped(bh)) acceptable = (type ==0 ); else break;
include/linux/cpu.h +1 -1
@@ -32,7 +32,7 @@ struct cpu { };extern int register_cpu (struct cpu *,int ,struct node *); -extern struct sys_device *get_cpu_sysdev (int cpu); +extern struct sys_device *get_cpu_sysdev (unsigned cpu);#ifdef CONFIG_HOTPLUG_CPU extern void unregister_cpu (struct cpu *,struct node *);#endif
include/linux/raid/raid1.h +1 -1
@@ -130,6 +130,6 @@ struct r1bio_s {* with failure when last write completes (and all failed). * Record that bi_end_io was called with this flag... */ -#define R1BIO_Returned 4 +#define R1BIO_Returned 6#endif
include/linux/rtc.h +2 -2
@@ -11,8 +11,6 @@#ifndef _LINUX_RTC_H_#define _LINUX_RTC_H_ -#include <linux/interrupt.h> -/* * The struct used to pass data via the following ioctl. Similar to the * struct tm in <time.h>, but it needs to be here so that the kernel
@@ -95,6 +93,8 @@ struct rtc_pll_info { #ifdef __KERNEL__ +#include <linux/interrupt.h> + typedef struct rtc_task { void (*func)(void *private_data); void *private_data;
kernel/sched.c +7 -2
@@ -237,6 +237,7 @@ struct runqueue {task_t *migration_thread;struct list_head migration_queue; +int cpu;#endif #ifdef CONFIG_SCHEDSTATS
@@ -1660,6 +1661,9 @@ unsigned long nr_iowait(void)/* * double_rq_lock - safely lock two runqueues * +* We must take them in cpu order to match code in +* dependent_sleeper and wake_dependent_sleeper. +* * Note this does not disable interrupts like task_rq_lock, * you need to do so manually before calling. */
@@ -1671,7 +1675,7 @@ static void double_rq_lock(runqueue_t *rspin_lock (&rq1->lock);__acquire (rq2->lock);/* Fake it out ;) */ }else { -if (rq1 < rq2) { +if (rq1->cpu < rq2->cpu) {spin_lock (&rq1->lock);spin_lock (&rq2->lock); }else {
@@ -1707,7 +1711,7 @@ static void double_lock_balance(runqueue __acquires(this_rq->lock) {if (unlikely (!spin_trylock (&busiest->lock))) { -if (busiest < this_rq) { +if (busiest->cpu < this_rq->cpu) {spin_unlock (&this_rq->lock);spin_lock (&busiest->lock);spin_lock (&this_rq->lock);
@@ -6035,6 +6039,7 @@ void __init sched_init(void) rq->push_cpu =0 ; rq->migration_thread =NULL ;INIT_LIST_HEAD (&rq->migration_queue); + rq->cpu = i;#endif atomic_set (&rq->nr_iowait,0 );
net/core/sock.c +3 -2
@@ -404,8 +404,9 @@ set_rcvbuf:if (!valbool) { sk->sk_bound_dev_if =0 ; }else { -if (optlen >IFNAMSIZ ) - optlen =IFNAMSIZ ; +if (optlen >IFNAMSIZ -1 ) + optlen =IFNAMSIZ -1 ; +memset (devname,0 ,sizeof (devname));if (copy_from_user (devname, optval, optlen)) { ret = -EFAULT ;break ;
net/ipv4/ip_output.c +1 -5
@@ -1249,11 +1249,7 @@ int ip_push_pending_frames(struct sock * iph->tos = inet->tos; iph->tot_len =htons (skb->len); iph->frag_off = df; -if (!df) { -__ip_select_ident (iph, &rt->u.dst,0 ); - }else { - iph->id =htons (inet->id++); - } +ip_select_ident (iph, &rt->u.dst, sk); iph->ttl = ttl; iph->protocol = sk->sk_protocol; iph->saddr = rt->rt_src;
Quoted 9 lines · Greg KH
We (the -stable team) are announcing the release of the 2.6.16.1 kernel.
The diffstat and short summary of the fixes are below.
I'll also be replying to this message with a copy of the patch between 2.6.16 and 2.6.16.1, as it is small enough to do so.
The updated 2.6.16.y git tree can be found at:
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.15.y.git
Oops, that should be:
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.16.y.git
sorry about that...
Hm, we shouldn't be using "rsync" as part of a git url these days. What's the recommended way of writing kernel.org git tree addresses now?
thanks,
greg k-h
Quoted 11 lines · Greg KH
Quoted 9 lines · Greg KH
We (the -stable team) are announcing the release of the 2.6.16.1 kernel.
The diffstat and short summary of the fixes are below.
I'll also be replying to this message with a copy of the patch between 2.6.16 and 2.6.16.1, as it is small enough to do so.
The updated 2.6.16.y git tree can be found at:
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.15.y.git
Quoted 7 lines
Oops, that should be:
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.16.y.gitsorry about that...
Hm, we shouldn't be using "rsync" as part of a git url these days. What's the recommended way of writing kernel.org git tree addresses now?
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.16.y.git
?
Signature · 1 line
Jens Axboe
Quoted 1 line · Greg KH
We (the -stable team) are announcing the release of the 2.6.16.1 kernel.
I still get this error :
# make CHK include/linux/version.h CHK include/linux/compile.h UPD include/linux/compile.h CC init/version.o LD init/built-in.o CHK usr/initramfs_list GEN .version CHK include/linux/compile.h UPD include/linux/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 drivers/built-in.o: In function `isd200_Initialization': : undefined reference to `ide_fix_driveid' make: *** [.tmp_vmlinux1] Error 1
Attached .conf
PATCH 1/1 isd200: limit to BLK_DEV_IDE
Quoted 6 lines · Beber
Quoted 1 line · Greg KH
We (the -stable team) are announcing the release of the 2.6.16.1 kernel.
I still get this error :
# make
...
Quoted 3 lines
drivers/built-in.o: In function `isd200_Initialization':
: undefined reference to `ide_fix_driveid'
make: *** [.tmp_vmlinux1] Error 1
Was this reported earlier?
Please test the patch below.
It works for me with your config and various others.
From: Randy Dunlap <[email protected]>
Limit USB_STORAGE_ISD200 to whatever BLK_DEV_IDE and USB_STORAGE are set to (y, m) since isd200 calls ide_fix_driveid() in the BLK_DEV_IDE code.
--- drivers/usb/storage/Kconfig | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-)
drivers/usb/storage/Kconfig +1 -1
@@ -48,7 +48,7 @@ config USB_STORAGE_FREECOM config USB_STORAGE_ISD200 bool "ISD-200 USB/ATA Bridge support" - depends on USB_STORAGE && BLK_DEV_IDE + depends on USB_STORAGE && (BLK_DEV_IDE=y || BLK_DEV_IDE=m && USB_STORAGE=m) ---help--- Say Y here if you want to use USB Mass Store devices based on the In-Systems Design ISD-200 USB/ATA bridge.
Re: [PATCH] isd200: limit to BLK_DEV_IDE
Quoted 13 lines · Randy.Dunlap
Limit
USB_STORAGE_ISD200to whateverBLK_DEV_IDEandUSB_STORAGEare set to (y, m) since isd200 callside_fix_driveid()in theBLK_DEV_IDEcode.Signed-off-by Randy Dunlap <[email protected]>--- drivers/usb/storage/Kconfig | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-)
drivers/usb/storage/Kconfig config USB_STORAGE_FREECOM · line 51
Quoted 5 lines
drivers/usb/storage/Kconfig +1
-1@@ -48,7 +48,7 @@ config USB_STORAGE_FREECOM config USB_STORAGE_ISD200 bool "ISD-200 USB/ATA Bridge support" - depends on USB_STORAGE && BLK_DEV_IDE + depends on USB_STORAGE && (BLK_DEV_IDE=y || BLK_DEV_IDE=m && USB_STORAGE=m)
Hmm. That expression is _really_ hard to figure out.
It would be more logical to make it
depends on USB_STORAGE && (BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE)
or, even more preferably, split up the rules as two separate dependencies:
depends on USB_STORAGE depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE
(where that second thing really _should_ be expressible as
depends on BLK_DEV_IDE >= USB_STORAGE
but the kconfig language doesn't support that syntax..)
Linus
Re: [PATCH] isd200: limit to BLK_DEV_IDE
Quoted 15 lines · Linus Torvalds
Quoted 14 lines · Randy.Dunlap
Limit
USB_STORAGE_ISD200to whateverBLK_DEV_IDEandUSB_STORAGEare set to (y, m) since isd200 callside_fix_driveid()in theBLK_DEV_IDEcode.Signed-off-by Randy Dunlap <[email protected]>--- drivers/usb/storage/Kconfig | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-)drivers/usb/storage/Kconfig +0
-0@@ -48,7 +48,7 @@ config USB_STORAGE_FREECOM
Quoted 6 lines
drivers/usb/storage/Kconfig config USB_STORAGE_FREECOM · line 51
Quoted 4 lines
drivers/usb/storage/Kconfig +1
-1config USB_STORAGE_ISD200 bool "ISD-200 USB/ATA Bridge support" - depends on USB_STORAGE && BLK_DEV_IDE + depends on USB_STORAGE && (BLK_DEV_IDE=y || BLK_DEV_IDE=m && USB_STORAGE=m)Hmm. That expression is _really_ hard to figure out.
Yes, I just modeled it on some other similar Kconfigs.
Quoted 6 lines
It would be more logical to make it
depends on USB_STORAGE && (BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE)or, even more preferably, split up the rules as two separate dependencies:
Quoted 8 lines
depends on USB_STORAGE depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE(where that second thing really _should_ be expressible as
depends on
BLK_DEV_IDE>=USB_STORAGEbut the kconfig language doesn't support that syntax..)
In some way, the original line made sense to me:
depends on USB_STORAGE && BLK_DEV_IDE
where we have: =y && =m
so if USB_STORAGE_ISD200 were a tristate, it would have been limited to 'm', but since it's a bool, it's not limited.
New patch is below.
Signature · 23 lines
From: Randy Dunlap <[email protected]> Limit USB_STORAGE_ISD200 to whatever BLK_DEV_IDE and USB_STORAGE are set to (y, m) since isd200 calls ide_fix_driveid() in the BLK_DEV_IDE code. Signed-off-by: Randy Dunlap <[email protected]> --- drivers/usb/storage/Kconfig | 3 ++- 1 files changed, 2 insertions(+), 1 deletion(-) --- linux-2616-z.orig/drivers/usb/storage/Kconfig +++ linux-2616-z/drivers/usb/storage/Kconfig @@ -48,7 +48,8 @@ config USB_STORAGE_FREECOM config USB_STORAGE_ISD200 bool "ISD-200 USB/ATA Bridge support" - depends on USB_STORAGE && BLK_DEV_IDE + depends on USB_STORAGE + depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE ---help--- Say Y here if you want to use USB Mass Store devices based on the In-Systems Design ISD-200 USB/ATA bridge.
Re: [PATCH] isd200: limit to BLK_DEV_IDE
Quoted 7 lines · Randy.Dunlap
In some way, the original line made sense to me:
depends on USB_STORAGE && BLK_DEV_IDEwhere we have: =y && =m
so if
USB_STORAGE_ISD200were a tristate, it would have been limited to 'm', but since it's a bool, it's not limited.
Oh, the original makes _tons_ of sense. It's just that it doesn't show the real dependency.
It's perfectly fine to say
bool depends on USB_STORAGE && BLK_DEV_IDE
and the bool will be true whenever usb storage and blk-dev-ide both are enabled somehow. So far so fine.
It's just that in this case, it simply wasn't enough. It didn't _just_ depend on BLK_DEV_IDE, it depended on it being available at link-time. So the original Kconfig rule made perfect sense, it just didn't match the real dependency.
Linus
Re: [PATCH] isd200: limit to BLK_DEV_IDE
In reply to Randy.DunlapLe Thu, 30 Mar 2006 14:35:26 -0800 (PST), "Randy.Dunlap" <[email protected]> m'a avoué:
Quoted 7 lines · Beber
Quoted 6 lines · Greg KH
Quoted 1 line
We (the -stable team) are announcing the release of the 2.6.16.1 kernel.
I still get this error :
Quoted 7 lines
Quoted 1 line
# make...
Quoted 3 lines
drivers/built-in.o: In function `isd200_Initialization':
: undefined reference to `ide_fix_driveid'
make: *** [.tmp_vmlinux1] Error 1Was this reported earlier?
Yes, it was, but ignored, so I repost it ;)
Quoted 2 lines
Please test the patch below.
It works for me with your config and various others.
It work here too.
Thanks
Signature · 3 lines
/* Beber : beber (AT) gna (DOT) org
* http://guybrush.ath.cx, irc://irc.freenode.net/#{e.fr,gentoofr}
* Guybrush @ Melee */A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [stable] Re: [PATCH] isd200: limit to BLK_DEV_IDE
Quoted 20 lines · Beber
Quoted 19 lines · Bertrand Jacquin
Le Thu, 30 Mar 2006 14:35:26 -0800 (PST), "Randy.Dunlap" <[email protected]> m'a avou?:
Quoted 7 lines · Beber
Quoted 6 lines · Greg KH
Quoted 1 line
We (the -stable team) are announcing the release of the 2.6.16.1 kernel.
I still get this error :
Quoted 7 lines
Quoted 1 line
# make...
Quoted 3 lines
drivers/built-in.o: In function `isd200_Initialization':
: undefined reference to `ide_fix_driveid'
make: *** [.tmp_vmlinux1] Error 1Was this reported earlier?
Yes, it was, but ignored, so I repost it ;)
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Please test the patch below.
It works for me with your config and various others.It work here too.
ThanksI look on last GIT history and didn't find this applyed upstream. Will it be ?
No one has forwarded it to the stable group, so it's a bit hard to apply it to the tree if that doesn't happen :)
thanks,
greg k-h
Re: [stable] Re: [PATCH] isd200: limit to BLK_DEV_IDE
Quoted 24 lines · On Wed, 5 Apr 2006 11:45:32 -0700 Greg KH wrote:
Quoted 23 lines · Beber
Quoted 22 lines · Bertrand Jacquin
Le Thu, 30 Mar 2006 14:35:26 -0800 (PST), "Randy.Dunlap" <[email protected]> m'a avou?:
Quoted 7 lines · Beber
Quoted 6 lines · Greg KH
Quoted 1 line
We (the -stable team) are announcing the release of the 2.6.16.1 kernel.
I still get this error :
Quoted 7 lines
Quoted 1 line
# make...
Quoted 3 lines
drivers/built-in.o: In function `isd200_Initialization':
: undefined reference to `ide_fix_driveid'
make: *** [.tmp_vmlinux1] Error 1Was this reported earlier?
Yes, it was, but ignored, so I repost it ;)
Quoted 2 lines
Please test the patch below.
It works for me with your config and various others.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
It work here too.
ThanksI look on last GIT history and didn't find this applyed upstream. Will it be ?
No one has forwarded it to the stable group, so it's a bit hard to apply it to the tree if that doesn't happen :)
ok, I just did that...
---
~Randy