Skip to contentSkip to conversation

libata updates

PATCH New Jeff Garzik 1 participant 1 message Mar 30, 2006

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 libata updates

Please pull from 'upstream-linus' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git

to receive the following updates:

 Documentation/DocBook/libata.tmpl |   47 +++++++++-
 drivers/scsi/libata-bmdma.c       |   26 ++++-
 drivers/scsi/libata-core.c        |  168 ++++++++++++++------------------------
 drivers/scsi/sata_mv.c            |   42 +++++----
 include/linux/libata.h            |   10 ++
 5 files changed, 164 insertions(+), 129 deletions(-)

Alan Cox:
libata: BMDMA handling updates
libata: Add ->set_mode hook for odd drivers
libata - ATA is both ATA and CFA
libata: Simplex and other mode filtering logic
libata: Fix interesting use of "extern" and also some bracketing

Albert Lee:
libata: ata_dev_init_params() fixes

Mark Lord:
sata_mv: three bug fixes

Tejun Heo:
libata: kill E.D.D.
libata: cosmetic changes in ata_bus_softreset()
libata: add FIXME above ata_dev_xfermask()
libata: kill trailing whitespace

Documentation/DocBook/libata.tmpl +43 -4
index d260d92..5bcbb6e 100644
@@ -120,14 +120,27 @@ void (*dev_config) (struct ata_port *, s
 	<programlisting>
 void (*set_piomode) (struct ata_port *, struct ata_device *);
 void (*set_dmamode) (struct ata_port *, struct ata_device *);
-void (*post_set_mode) (struct ata_port *ap);
+void (*post_set_mode) (struct ata_port *);
+unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned int);
 	</programlisting>
 
 	<para>
 	Hooks called prior to the issue of SET FEATURES - XFER MODE
-	command.  dev->pio_mode is guaranteed to be valid when
-	->set_piomode() is called, and dev->dma_mode is guaranteed to be
-	valid when ->set_dmamode() is called.  ->post_set_mode() is
+	command.  The optional ->mode_filter() hook is called when libata
+	has built a mask of the possible modes. This is passed to the 
+	->mode_filter() function which should return a mask of valid modes
+	after filtering those unsuitable due to hardware limits. It is not
+	valid to use this interface to add modes.
+	</para>
+	<para>
+	dev->pio_mode and dev->dma_mode are guaranteed to be valid when
+	->set_piomode() and when ->set_dmamode() is called. The timings for
+	any other drive sharing the cable will also be valid at this point.
+	That is the library records the decisions for the modes of each
+	drive on a channel before it attempts to set any of them.
+	</para>
+	<para>
+	->post_set_mode() is
 	called unconditionally, after the SET FEATURES - XFER MODE
 	command completes successfully.
 	</para>
@@ -230,6 +243,32 @@ void (*dev_select)(struct ata_port *ap, 
 
 	</sect2>
 
+	<sect2><title>Private tuning method</title>
+	<programlisting>
+void (*set_mode) (struct ata_port *ap);
+	</programlisting>
+
+	<para>
+	By default libata performs drive and controller tuning in
+	accordance with the ATA timing rules and also applies blacklists
+	and cable limits. Some controllers need special handling and have
+	custom tuning rules, typically raid controllers that use ATA
+	commands but do not actually do drive timing.
+	</para>
+
+	<warning>
+	<para>
+	This hook should not be used to replace the standard controller
+	tuning logic when a controller has quirks. Replacing the default
+	tuning logic in that case would bypass handling for drive and
+	bridge quirks that may be important to data reliability. If a
+	controller needs to filter the mode selection it should use the
+	mode_filter hook instead.
+	</para>
+	</warning>
+
+	</sect2>
+
 	<sect2><title>Reset ATA bus</title>
 	<programlisting>
 void (*phy_reset) (struct ata_port *ap);
drivers/scsi/libata-bmdma.c +22 -4
index 95d81d8..835dff0 100644
@@ -703,6 +703,7 @@ ata_pci_init_native_mode(struct pci_dev 
 	struct ata_probe_ent *probe_ent =
 		ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
 	int p = 0;
+	unsigned long bmdma;
 
 	if (!probe_ent)
 		return NULL;
@@ -716,7 +717,12 @@ ata_pci_init_native_mode(struct pci_dev 
 		probe_ent->port[p].altstatus_addr =
 		probe_ent->port[p].ctl_addr =
 			pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
-		probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
+		bmdma = pci_resource_start(pdev, 4);
+		if (bmdma) {
+			if (inb(bmdma + 2) & 0x80)
+				probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+			probe_ent->port[p].bmdma_addr = bmdma;
+		}
 		ata_std_ports(&probe_ent->port[p]);
 		p++;
 	}
@@ -726,7 +732,13 @@ ata_pci_init_native_mode(struct pci_dev 
 		probe_ent->port[p].altstatus_addr =
 		probe_ent->port[p].ctl_addr =
 			pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
-		probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+		bmdma = pci_resource_start(pdev, 4);
+		if (bmdma) {
+			bmdma += 8;
+			if(inb(bmdma + 2) & 0x80)
+			probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+			probe_ent->port[p].bmdma_addr = bmdma;
+		}
 		ata_std_ports(&probe_ent->port[p]);
 		p++;
 	}
@@ -740,6 +752,7 @@ static struct ata_probe_ent *ata_pci_ini
 				struct ata_port_info *port, int port_num)
 {
 	struct ata_probe_ent *probe_ent;
+	unsigned long bmdma;
 
 	probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
 	if (!probe_ent)
@@ -766,8 +779,13 @@ static struct ata_probe_ent *ata_pci_ini
 			break;
 	}
 
-	probe_ent->port[0].bmdma_addr =
-		pci_resource_start(pdev, 4) + 8 * port_num;
+	bmdma = pci_resource_start(pdev, 4);
+	if (bmdma != 0) {
+		bmdma += 8 * port_num;
+		probe_ent->port[0].bmdma_addr = bmdma;
+		if (inb(bmdma + 2) & 0x80)
+			probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+	}
 	ata_std_ports(&probe_ent->port[0]);
 
 	return probe_ent;
drivers/scsi/libata-core.c +66 -102

323 lines not on this page · raw message

drivers/scsi/sata_mv.c +24 -18

75 lines not on this page · raw message

include/linux/libata.h +9 -1
index 0471922..0d61357 100644
@@ -160,8 +160,10 @@ enum {
 	ATA_QCFLAG_DMAMAP	= ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
 	ATA_QCFLAG_EH_SCHEDULED = (1 << 5), /* EH scheduled */
 
+	/* host set flags */
+	ATA_HOST_SIMPLEX	= (1 << 0),	/* Host is simplex, one DMA channel per host_set only */
+	
 	/* various lengths of time */
-	ATA_TMOUT_EDD		= 5 * HZ,	/* heuristic */
 	ATA_TMOUT_PIO		= 30 * HZ,
 	ATA_TMOUT_BOOT		= 30 * HZ,	/* heuristic */
 	ATA_TMOUT_BOOT_QUICK	= 7 * HZ,	/* heuristic */
@@ -279,6 +281,7 @@ struct ata_probe_ent {
 	unsigned long		irq;
 	unsigned int		irq_flags;
 	unsigned long		host_flags;
+	unsigned long		host_set_flags;
 	void __iomem		*mmio_base;
 	void			*private_data;
 };
@@ -291,6 +294,9 @@ struct ata_host_set {
 	unsigned int		n_ports;
 	void			*private_data;
 	const struct ata_port_operations *ops;
+	unsigned long		flags;
+	int			simplex_claimed;	/* Keep seperate in case we
+							   ever need to do this locked */
 	struct ata_port *	ports[0];
 };
 
@@ -420,6 +426,7 @@ struct ata_port_operations {
 
 	void (*set_piomode) (struct ata_port *, struct ata_device *);
 	void (*set_dmamode) (struct ata_port *, struct ata_device *);
+	unsigned long (*mode_filter) (const struct ata_port *, struct ata_device *, unsigned long);
 
 	void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf);
 	void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@@ -430,6 +437,7 @@ struct ata_port_operations {
 	void (*dev_select)(struct ata_port *ap, unsigned int device);
 
 	void (*phy_reset) (struct ata_port *ap); /* obsolete */
+	void (*set_mode) (struct ata_port *ap);
 	int (*probe_reset) (struct ata_port *ap, unsigned int *classes);
 
 	void (*post_set_mode) (struct ata_port *ap);