blade servers?
I figured that people here would know. If you were looking for blade servers and you were more interested in cost and heat generation than the most performance, what would you buy? We're looking for 20 x86 cpus. They have to beat ASUS terminators (nice little boxes, if you haven't checked them out you should, about $100 + cpu + mem + disk and they are quiet and run on ~100watt power supplies so they don't generate a lot of heat).
So far, the stuff at www.rackmount.com looks pretty good but they are (like everyone else so far as I can tell) focussed on performance. For all of the Unix like platforms, we'd be happy with 2Ghz Athlons (don't need opterons) with 256MB. It's true that for the windows platforms we like 2GB because we use 1GB as a ram disk to get reasonable performance out of @#!! Windows.
Thanks in advance,
--lm
Quoted 7 lines · Larry McVoy
I figured that people here would know. If you were looking for blade servers and you were more interested in cost and heat generation than the most performance, what would you buy? We're looking for 20 x86 cpus. They have to beat ASUS terminators (nice little boxes, if you haven't checked them out you should, about $100 + cpu + mem + disk and they are quiet and run on ~100watt power supplies so they don't generate a lot of heat).
You're not going to find blade hardware that's cost competitive with barebones pc chasis on a per unit basis...
That said you over-simplifying the issue a bit. Terminator minitowers are 11" high so if you set them on a shelf in a rack you get 2 in 7u or maybe 4, if you're willing to have a cable management nightmare and a heat problem in the middle.
People are willing to pay a lot relatively speaking for space efficiency, rack hardware, sane cable cable management, and easly repalacable parts.
In general, managing costs has a lot to do with not buying what you don't need which in this case sounds like lots of cpu power, but in the case of cluster users includes cdrom drives, floppies, occasionaly harddisks etc.
Quoted 16 lines
So far, the stuff at www.rackmount.com looks pretty good but they are (like everyone else so far as I can tell) focussed on performance. For all of the Unix like platforms, we'd be happy with 2Ghz Athlons (don't need opterons) with 256MB. It's true that for the windows platforms we like 2GB because we use 1GB as a ram disk to get reasonable performance out of @#!! Windows.
Thanks in advance,
--lm
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 3 lines
-------------------------------------------------------------------------- Joel Jaeggli Unix Consulting [email protected] GPG Key Fingerprint: 5C6E 0104 BAF0 40B0 5BD3 C38B F000 35AB B67F 56B2
Quoted 15 lines · Larry McVoy
I figured that people here would know. If you were looking for blade servers and you were more interested in cost and heat generation than the most performance, what would you buy? We're looking for 20 x86 cpus. They have to beat ASUS terminators (nice little boxes, if you haven't checked them out you should, about $100 + cpu + mem + disk and they are quiet and run on ~100watt power supplies so they don't generate a lot of heat).
So far, the stuff at www.rackmount.com looks pretty good but they are (like everyone else so far as I can tell) focussed on performance. For all of the Unix like platforms, we'd be happy with 2Ghz Athlons (don't need opterons) with 256MB. It's true that for the windows platforms we like 2GB because we use 1GB as a ram disk to get reasonable performance out of @#!! Windows.
Quoted 3 lines
Thanks in advance,
--lm
Check out http://www.siliconmechanics.com/c292/blage-server.php.
We evaluated one (so far). Prices are not too bad, plus you can get 5 different blades. The full chassis, with 14 blades, needs good ventilation -- lots of power -- lots of heat!
Cheers,
Dick Johnson
Penguin : Linux version 2.6.15.4 on an i686 machine (5589.42 BogoMips). Warning : 98.36% of all statistics are fiction, book release in April. _
****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.
Thank you.
Quoted 2 lines · Larry McVoy
For all of the Unix like platforms, we'd be happy with 2Ghz Athlons (don't need opterons) with 256MB. It's true that for the windows platforms we
No specific recommendations, but one thing to keep in mind is that later process/stepping Athlon 64/Opterons are far more power efficient (especially when using powernow) than older 32 bit Athlons.
I'm not sure why Xeon based space heaters^H^H blades have been recommended in previous posts when low power is an issue?!?
Cheers
David
Quoted 3 lines · Larry McVoy
I figured that people here would know. If you were looking for blade servers and you were more interested in cost and heat generation than the most performance, what would you buy?
Consider systems based on the "Sossaman" Xeon LV processor; it has good integer performance and low power.
For example, at IBM we just released a new model of the BladeCenter HS20 (model 7981); I've seen one of these servers using only 100W when running. Real servers are never going to be as cheap as the cheapest whiteboxes, but they do run cool.
Wes Felter - [email protected]