LVM over IP network
Hello,
I have 10 Dell workstation on a LAN. Each workstation has 80 GB hard drive. Two workstations consumed most of the disk space and remaining eight workstations still has plenty of disk space unused.
I am trying to find an optimized way to use the excess space on the those harddrives (about 80 GB x 8 = 800GB) that are scattered over 8 different workstations connected in the LAN.
I do understand that LVM and EVMS are quite useful for managing the disk space in given work station. So I am wondering if there is such thing as LVM over IP network ? so that I can maximize my disk usage. If not, what is my other choice ?
What I want basically, if I could just collect those 800 GB excess space (not utilized) and assign it to the work stations starving for disk space. Is this achievable through LVM or EVMS?
Thanks for any thoughts or info.
Arul
Quoted 4 lines · On Friday 07 April 2006 07:59, [email protected] wrote:
I do understand that LVM and EVMS are quite useful for managing the disk space in given work station. So I am wondering if there is such thing as LVM over IP network ? so that I can maximize my disk usage. If not, what is my other choice ?
Why not? Using iSCSI or ATAoE you can export the extra space from each of the system as devices that will appear to be block devices. From there you can add them to a vg anytime you want. Just be careful how you do it because if one of the systems goes off the network you will not have access to the data from that drive. Also I'm not so sure how well LVM deals with having a drive dissappear out from underneath it.
Signature · 3 lines
Zac Slade [email protected] ICQ:1415282 YM:krakrjak AIM:ttyp99
Quoted 11 lines · Zac Slade
Quoted 4 lines · On Friday 07 April 2006 07:59, [email protected] wrote:
I do understand that LVM and EVMS are quite useful for managing the disk space in given work station. So I am wondering if there is such thing as LVM over IP network ? so that I can maximize my disk usage. If not, what is my other choice ?
Why not? Using iSCSI or ATAoE you can export the extra space from each of the system as devices that will appear to be block devices. From there you can add them to a vg anytime you want. Just be careful how you do it because if one of the systems goes off the network you will not have access to the data from that drive. Also I'm not so sure how well LVM deals with having a drive dissappear out from underneath it.
if one PV lose. u can active a partial VG and do read only LV on good PVs.
ps, i do not understand why LV only allow read only access. anybody know why?
ming
Hi,
I have 10 Dell workstation on a LAN. Each workstation has 80 GB hard drive. Two workstations consumed most of the disk space and remaining eight workstations still has plenty of disk space unused.
...
What I want basically, if I could just collect those 800 GB
excess space (not utilized) and assign it to the work stations starving
for disk space. Is this achievable through LVM or EVMS?
I would never do something like this. You make each workstation dependent on all the other workstations. If one of them is turned off, crashes, dies, etc. your other workstations lose their data. Disks are cheap these days. Just buy an extra drive for the workstations that need it.
Good luck,
Sander
Quoted 19 lines · Sander Steffann
Hi,
I have 10 Dell workstation on a LAN. Each workstation has 80 GB hard drive. Two workstations consumed most of the disk space and
remaining eight workstations still has plenty of disk space unused....
What I want basically, if I could just collect those 800 GB excess space (not utilized) and assign it to the work stations starving
for disk space. Is this achievable through LVM or EVMS?
I would never do something like this. You make each workstation dependent on all the other workstations. If one of them is turned off, crashes, dies, etc. your other workstations lose their data. Disks are cheap these days. Just buy an extra drive for the workstations that need it.
Quoted 2 lines
Good luck,
Sander
or put all these disks in one box and let other boxes boot from iscsi and use centralized ip storage.
Quoted 6 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 2 lines · Ming Zhang
or put all these disks in one box and let other boxes boot from iscsi and use centralized ip storage.
This is the most sensible thought. It's almost like nfs root only a little bit better. They might need a CD burned that has a kernel and initramfs that loads the kernel and modules then loads their rootfs via iSCSI.
Good idea Ming!
Signature · 3 lines
Zac Slade [email protected] ICQ:1415282 YM:krakrjak AIM:ttyp99
Quoted 6 lines · Zac Slade
Quoted 2 lines · Ming Zhang
or put all these disks in one box and let other boxes boot from iscsi and use centralized ip storage.
This is the most sensible thought. It's almost like nfs root only a little bit better. They might need a CD burned that has a kernel and initramfs that loads the kernel and modules then loads their rootfs via iSCSI.
no, u do not need a cd at all.
http://sourceforge.net/mailarchive/message.php?msg_id=14610082
http://groups.google.com/group/open-iscsi/browse_thread/thread/714c8d822df99285/fae407856ec7e744%23fae407856ec7e744
google it or check those iscsi lists, there are such info available.
Quoted 2 lines
Good idea Ming!