PCMCIA: make Pretec CF Wifi use hostap_cs by default
PATCH 1/1 PCMCIA: make Pretec CF Wifi use hostap_cs by default
I use two Zaurus palmtops - one run 2.4.18 kernel (it's sl-5500) and second run 2.6.16. Both are running under control of OpenZaurus distribution (I'm Release Manager of it).
When I use pcmcia-cs then my Pretec WiFi card is handled by hostap driver and everything is working fine. Recently I switched to pcmciautils and after card insert orinoco modules are loaded. I prefer to use hostap modules because they work the same under 2.4 and 2.6 kernels (with orinoco I have to use 0.13e ones because never ones does not work under 2.4/arm).
This patch adds definition of my card to hostap_cs cardlist. It was tested on Sharp Zaurus C760 palmtop running 2.6.16 + pcmciautils 010 + udev 084
PS - I'm not subscribed to that list - so please Cc: me on reply.
net/wireless/hostap/hostap_cs.c renamed from net/wireless/hostap/hostap_cs.c.orig +3 -0
@@ -912,6 +912,9 @@ static struct pcmcia_device_id hostap_csPCMCIA_DEVICE_PROD_ID123 ("SMC" ,"SMC2632W" ,"Version 01.02" ,0xc4f8b18b ,0x474a1f2a ,0x4b74baa0 ), +PCMCIA_DEVICE_PROD_ID123 ( +"Pretec" ,"CompactWLAN Card 802.11b" ,"2.5" , +0x1cadd3e5 ,0xe697636c ,0x7a5bfcf1 ),PCMCIA_DEVICE_PROD_ID12 ("BUFFALO" ,"WLI-CF-S11G" ,0x2decece3 ,0x82067c18 ), PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card",
Signature · 5 lines
JID: hrw-jabber.org Palmtop: Sharp Zaurus C760 OpenEmbedded/OpenZaurus developer Vi has two modes: the one in which it beeps, and the one in which it doesn't.
Hello, Marcin!
Quoted 2 lines · Marcin Juszkiewicz
This patch adds definition of my card to
hostap_cscardlist. It was tested on Sharp Zaurus C760 palmtop running 2.6.16 + pcmciautils 010 + udev 084
Thanks. I have made a bigger patch that includes this entry already. I'll to to submit it for Linux 2.6.17.
Signature · 2 lines
Regards, Pavel Roskin