typo: buad -> baud
PATCH 1/1 typo: buad -> baud
Replacing mistyped "buad" with "baud" where applicable.
Signed-off-by Horst Schirmeier <[email protected]>
---
arch/mips/ddb5xxx/ddb5476/dbg_io.c | 2 +- arch/mips/ddb5xxx/ddb5477/kgdb_io.c | 2 +- arch/mips/gt64120/ev64120/serialGT.c | 2 +- arch/mips/gt64120/momenco_ocelot/dbg_io.c | 2 +- arch/mips/ite-boards/generic/dbg_io.c | 2 +- arch/mips/momentum/jaguar_atx/dbg_io.c | 2 +- arch/mips/momentum/ocelot_c/dbg_io.c | 2 +- arch/mips/momentum/ocelot_g/dbg_io.c | 2 +- include/asm-arm/arch-l7200/serial_l7200.h | 2 +- include/asm-arm/arch-l7200/uncompress.h | 2 +- 10 files changed, 10 insertions(+), 10 deletions(-)
arch/mips/ddb5xxx/ddb5476/dbg_io.c +1 -1
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data,/* disable interrupts */ UART16550_WRITE (OFS_INTR_ENABLE ,0 ); -/* set up buad rate */ +/* set up baud rate */ {uint32 divisor;
arch/mips/ddb5xxx/ddb5477/kgdb_io.c +1 -1
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data,/* disable interrupts */ UART16550_WRITE (OFS_INTR_ENABLE ,0 ); -/* set up buad rate */ +/* set up baud rate */ {uint32 divisor;
arch/mips/gt64120/ev64120/serialGT.c +1 -1
@@ -149,7 +149,7 @@ void serial_set(int channel, unsigned lo#else /* * Note: Set baud rate, hardcoded here for rate of 115200 -* since became unsure of above "buad rate" algorithm (??). +* since became unsure of above "baud rate" algorithm (??). */ outreg (channel,LCR ,0x83 );outreg (channel,DLM ,0x00 );// See note above
arch/mips/gt64120/momenco_ocelot/dbg_io.c +1 -1
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data,/* disable interrupts */ UART16550_WRITE (OFS_INTR_ENABLE ,0 ); -/* set up buad rate */ +/* set up baud rate */ {uint32 divisor;
arch/mips/ite-boards/generic/dbg_io.c +1 -1
@@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data,/* disable interrupts */ UART16550_WRITE (OFS_INTR_ENABLE ,0 ); -/* set up buad rate */ +/* set up baud rate */ {uint32 divisor;
arch/mips/momentum/jaguar_atx/dbg_io.c +1 -1
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data,/* disable interrupts */ UART16550_WRITE (OFS_INTR_ENABLE ,0 ); -/* set up buad rate */ +/* set up baud rate */ {uint32 divisor;
arch/mips/momentum/ocelot_c/dbg_io.c +1 -1
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data,/* disable interrupts */ UART16550_WRITE (OFS_INTR_ENABLE ,0 ); -/* set up buad rate */ +/* set up baud rate */ {uint32 divisor;
arch/mips/momentum/ocelot_g/dbg_io.c +1 -1
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data,/* disable interrupts */ UART16550_WRITE (OFS_INTR_ENABLE ,0 ); -/* set up buad rate */ +/* set up baud rate */ {uint32 divisor;
include/asm-arm/arch-l7200/serial_l7200.h +1 -1
@@ -28,7 +28,7 @@#define UARTDR 0x00/* Tx/Rx data */ #define RXSTAT 0x04/* Rx status */ #define H_UBRLCR 0x08/* mode register high */ -#define M_UBRLCR 0x0C/* mode reg mid (MSB of buad)*/ +#define M_UBRLCR 0x0C/* mode reg mid (MSB of baud)*/ #define L_UBRLCR 0x10/* mode reg low (LSB of baud)*/ #define UARTCON 0x14/* control register */ #define UARTFLG 0x18/* flag register */
include/asm-arm/arch-l7200/uncompress.h +1 -1
@@ -6,7 +6,7 @@* Changelog: * 05-01-2000 SJH Created * 05-13-2000 SJH Filled in function bodies -* 07-26-2000 SJH Removed hard coded buad rate +* 07-26-2000 SJH Removed hard coded baud rate */ #include <asm/hardware.h>
Signature · 1 line
PGP-Key 0xD40E0E7A
Quoted 3 lines · Horst Schirmeier
Replacing mistyped "buad" with "baud" where applicable.
Signed-off-by Horst Schirmeier <[email protected]>
Thanks - I've only picked this up because it's serial/arm related and obviously correct (doesn't touch any code.) I'm not sure why anyone else hasn't picked it up.
Quoted 13 lines
---
arch/mips/ddb5xxx/ddb5476/dbg_io.c | 2 +- arch/mips/ddb5xxx/ddb5477/kgdb_io.c | 2 +- arch/mips/gt64120/ev64120/serialGT.c | 2 +- arch/mips/gt64120/momenco_ocelot/dbg_io.c | 2 +- arch/mips/ite-boards/generic/dbg_io.c | 2 +- arch/mips/momentum/jaguar_atx/dbg_io.c | 2 +- arch/mips/momentum/ocelot_c/dbg_io.c | 2 +- arch/mips/momentum/ocelot_g/dbg_io.c | 2 +- include/asm-arm/arch-l7200/serial_l7200.h | 2 +- include/asm-arm/arch-l7200/uncompress.h | 2 +- 10 files changed, 10 insertions(+), 10 deletions(-)
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 Serial core