Fixes in the -stable tree, but not in mainline
Subsystems (3)
PATCH 1/1 Fixes in the -stable tree, but not in mainline
Here are 5 patches that are in the -stable tree, yet not currently fixed in your mainline tree. One of them is a security fix, so it probably would be a good idea to get it into there :)
Please pull from:
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/stable-2.6.git/
or from:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/stable-2.6.git/
if it isn't synced up yet.
The full patch series will sent to the linux-kernel mailing list, if anyone wants to see them.
thanks,
greg k-h
drivers/block/cciss.c | 96 ++++++++++++++++++++++---------------------- drivers/usb/storage/Kconfig | 3 - fs/ext3/resize.c | 1 fs/partitions/check.c | 5 ++ ipc/shm.c | 2 5 files changed, 59 insertions(+), 48 deletions(-)
---------------
Ananiev, Leonid I:
ext3: Fix missed mutex unlock
Hugh Dickins:
shmat: stop mprotect from giving write permission to a readonly attachment (CVE-2006-1524)
Mike Miller:
cciss: bug fix for crash when running hpacucli
Randy Dunlap:
isd200: limit to BLK_DEV_IDE
Stephen Rothwell:
Fix block device symlink name
PATCH 1/5 isd200: limit to BLK_DEV_IDE
From: Randy Dunlap <[email protected]>
Limit USB_STORAGE_ISD200 to whatever BLK_DEV_IDE and USB_STORAGE are set to (y, m) since isd200 calls ide_fix_driveid() in the BLK_DEV_IDE code.
---
drivers/usb/storage/Kconfig | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
66e0a9888b774af625ce544f7c6597c7506d07db
drivers/usb/storage/Kconfig +2 -1
@@ -48,7 +48,8 @@ config USB_STORAGE_FREECOM config USB_STORAGE_ISD200 bool "ISD-200 USB/ATA Bridge support" - depends on USB_STORAGE && BLK_DEV_IDE + depends on USB_STORAGE + depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE ---help--- Say Y here if you want to use USB Mass Store devices based on the In-Systems Design ISD-200 USB/ATA bridge.
Signature · 1 line
1.2.6
PATCH 2/5 Fix block device symlink name
From: Stephen Rothwell <[email protected]>
As noted further on the this file, some block devices have a / in their name, so fix the "block:..." symlink name the same as the /sys/block name.
---
fs/partitions/check.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
2436f039d26a91e5404974ee0cb789b17db46168
fs/partitions/check.c +5 -0
@@ -372,6 +372,7 @@ static char *make_block_name(struct gendchar *name;static char *block_str ="block:" ;int size; +char *s; size =strlen (block_str) +strlen (disk->disk_name) +1 ; name =kmalloc (size,GFP_KERNEL );
@@ -379,6 +380,10 @@ static char *make_block_name(struct gendreturn NULL ;strcpy (name, block_str);strcat (name, disk->disk_name); +/* ewww... some of these buggers have / in name... */ + s =strchr (name,'/' ); +if (s) + *s ='!' ;return name; }
Signature · 1 line
1.2.6
PATCH 3/5 ext3: Fix missed mutex unlock
From: Ananiev, Leonid I <[email protected]>
Missed unlock_super()call is added in error condition code path.
---
fs/ext3/resize.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
75616cf9854b83eb83a968b1338ae0ee11c9673c
fs/ext3/resize.c +1 -0
@@ -767,6 +767,7 @@ int ext3_group_add(struct super_block *sif (input->group != sbi->s_groups_count) {ext3_warning (sb, __FUNCTION__,"multiple resizers run on filesystem!" ); +unlock_super (sb); err = -EBUSY ; goto exit_journal; }
Signature · 1 line
1.2.6
PATCH 4/5 cciss: bug fix for crash when running hpacucli
From: Mike Miller <[email protected]>
Fix a crash when running hpacucli with multiple logical volumes on a cciss controller. We were not properly initializing the disk->queue and causing a fault.
Thanks to Hasso Tepper for reporting the problem. Thanks to Steve Cameron for root causing the problem. Most of the patch just moves things around. The fix is a one-liner.
---
drivers/block/cciss.c | 96 +++++++++++++++++++++++++------------------------ 1 files changed, 49 insertions(+), 47 deletions(-)
ca1e0484d9fe8a9048ac32b0f9894545f43704e8
drivers/block/cciss.c +49 -47
@@ -1180,6 +1180,53 @@ static int revalidate_allvol(ctlr_info_treturn 0 ; } +static inline void complete_buffers (struct bio *bio,int status) +{ +while (bio) { +struct bio *xbh = bio->bi_next; +int nr_sectors =bio_sectors (bio); + + bio->bi_next =NULL ; +blk_finished_io (len); +bio_endio (bio, nr_sectors <<9 , status ?0 : -EIO ); + bio = xbh; + } + +} + +static void cciss_softirq_done (struct request *rq) +{ +CommandList_struct *cmd = rq->completion_data; +ctlr_info_t *h = hba[cmd->ctlr]; +unsigned long flags; +u64bit temp64; +int i, ddir; + +if (cmd->Request.Type.Direction ==XFER_READ ) + ddir =PCI_DMA_FROMDEVICE ; +else + ddir =PCI_DMA_TODEVICE ; + +/* command did not need to be retried */ +/* unmap the DMA mapping for all the scatter gather elements */ +for (i=0 ; i<cmd->Header.SGList; i++) { + temp64.val32.lower = cmd->SG[i].Addr.lower; + temp64.val32.upper = cmd->SG[i].Addr.upper; +pci_unmap_page (h->pdev, temp64.val, cmd->SG[i].Len, ddir); + } + +complete_buffers (rq->bio, rq->errors); + +#ifdef CCISS_DEBUG +printk ("Done with %p\n" , rq); +#endif /* CCISS_DEBUG */ + +spin_lock_irqsave (&h->lock, flags); +end_that_request_last (rq, rq->errors); +cmd_free (h, cmd,1 ); +spin_unlock_irqrestore (&h->lock, flags); +} +/* This function will check the usage_count of the drive to be updated/added. * If the usage_count is zero then the drive information will be updated and * the disk will be re-registered with the kernel. If not then it will be
@@ -1248,6 +1295,8 @@ static void cciss_update_drive_info(intblk_queue_max_sectors (disk->queue,512 ); +blk_queue_softirq_done (disk->queue, cciss_softirq_done); + disk->queue->queuedata = hba[ctlr]; blk_queue_hardsect_size(disk->queue,
@@ -2147,20 +2196,6 @@ static void start_io( ctlr_info_t *h)addQ (&(h->cmpQ), c); } } - -static inline void complete_buffers (struct bio *bio,int status) -{ -while (bio) { -struct bio *xbh = bio->bi_next; -int nr_sectors =bio_sectors (bio); - - bio->bi_next =NULL ; -blk_finished_io (len); -bio_endio (bio, nr_sectors <<9 , status ?0 : -EIO ); - bio = xbh; - } - -}/* Assumes that CCISS_LOCK(h->ctlr) is held. */ /* Zeros out the error record and then resends the command back */ /* to the controller */
@@ -2178,39 +2213,6 @@ static inline void resend_cciss_cmd( ctlstart_io (h); } -static void cciss_softirq_done (struct request *rq) -{ -CommandList_struct *cmd = rq->completion_data; -ctlr_info_t *h = hba[cmd->ctlr]; -unsigned long flags; -u64bit temp64; -int i, ddir; - -if (cmd->Request.Type.Direction ==XFER_READ ) - ddir =PCI_DMA_FROMDEVICE ; -else - ddir =PCI_DMA_TODEVICE ; - -/* command did not need to be retried */ -/* unmap the DMA mapping for all the scatter gather elements */ -for (i=0 ; i<cmd->Header.SGList; i++) { - temp64.val32.lower = cmd->SG[i].Addr.lower; - temp64.val32.upper = cmd->SG[i].Addr.upper; -pci_unmap_page (h->pdev, temp64.val, cmd->SG[i].Len, ddir); - } - -complete_buffers (rq->bio, rq->errors); - -#ifdef CCISS_DEBUG -printk ("Done with %p\n" , rq); -#endif /* CCISS_DEBUG */ - -spin_lock_irqsave (&h->lock, flags); -end_that_request_last (rq, rq->errors); -cmd_free (h, cmd,1 ); -spin_unlock_irqrestore (&h->lock, flags); -} -/* checks the status of the job and calls complete buffers to mark all * buffers for the completed job. Note that this function does not need * to hold the hba/queue lock.
Signature · 1 line
1.2.6
PATCH 5/5 shmat: stop mprotect from giving write permission to a readonly attachment (CVE-2006-1524)
From: Hugh Dickins <[email protected]>
I found that all of 2.4 and 2.6 have been letting mprotect give write permission to a readonly attachment of shared memory, whether or not IPC would give the caller that permission.
SUS says "The behaviour of this function [mprotect] is unspecified if the mapping was not established by a call to mmap", but I don't think we can interpret that as allowing it to subvert IPC permissions.
I haven't tried 2.2, but the 2.2.26 source looks like it gets it right; and the patch below reproduces that behaviour - mprotect cannot be used to add write permission to a shared memory segment attached readonly.
This patch is simple, and I'm sure it's what we should have done in 2.4.0:
if you want to go on to switch write permission on and off with mprotect, just don't attach the segment readonly in the first place.
However, we could have accumulated apps which attach readonly (even though they would be permitted to attach read/write), and which subsequently use mprotect to switch write permission on and off: it's not unreasonable.
I was going to add a second ipcperms check in do_shmat, to check for writable when readonly, and if not writable find_vma and clear VM_MAYWRITE.
But security_ipc_permission might do auditing, and it seems wrong to
report an attempt for write permission when there has been none. Or we could flag the vma as SHM, note the shmid or shp in vm_private_data, and then get mprotect to check.
But the patch below is a lot simpler: I'd rather stick with it, if we can convince ourselves somehow that it'll be safe.
---
ipc/shm.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
b78b6af66a5fbaf17d7e6bfc32384df5e34408c8
ipc/shm.c +2 -0
@@ -162,6 +162,8 @@ static int shm_mmap(struct file * file, ret =shmem_mmap (file, vma);if (ret ==0 ) { vma->vm_ops = &shm_vm_ops; +if (!(vma->vm_flags &VM_WRITE )) + vma->vm_flags &= ~VM_MAYWRITE ;shm_inc (file->f_dentry->d_inode->i_ino); }
Signature · 1 line
1.2.6
Quoted 3 lines · Greg KH
Here are 5 patches that are in the -stable tree, yet not currently fixed in your mainline tree. One of them is a security fix, so it probably would be a good idea to get it into there :)
I thought one of the requirements for accepting a patch into -stable was that it was already in mainline. Was this a change in policy that I missed, or just an oversight when we vetted these patches?
Not that I have anything against these patches, just curious in the future if we should NACK patches proposed for -stable if we notice that they aren't yet in mainline.
- Ted
Quoted 5 lines · Theodore Ts'o
Quoted 3 lines · Greg KH
Here are 5 patches that are in the -stable tree, yet not currently fixed in your mainline tree. One of them is a security fix, so it probably would be a good idea to get it into there :)
Quoted 7 lines
I thought one of the requirements for accepting a patch into -stable was that it was already in mainline. Was this a change in policy that I missed, or just an oversight when we vetted these patches?
Not that I have anything against these patches, just curious in the future if we should NACK patches proposed for -stable if we notice that they aren't yet in mainline.
Sometimes some of these patches don't make it into Linus's tree because they get lost in the shuffle (like the Kconfig one), or because they were security issues that hit -stable first (like another one in there).
Either way, yes, the rule is that it should be in mainline, or in the pipe to get into mainline (as was the 5 in this patchset.) I just wanted to make sure they made it into there, and didn't get lost.
thanks,
greg k-h
Quoted 15 lines · Greg KH
Quoted 5 lines · Theodore Ts'o
Quoted 3 lines · Greg KH
Here are 5 patches that are in the -stable tree, yet not currently fixed in your mainline tree. One of them is a security fix, so it probably would be a good idea to get it into there :)
Quoted 7 lines
I thought one of the requirements for accepting a patch into -stable was that it was already in mainline. Was this a change in policy that I missed, or just an oversight when we vetted these patches?
Not that I have anything against these patches, just curious in the future if we should NACK patches proposed for -stable if we notice that they aren't yet in mainline.
Quoted 8 lines
Sometimes some of these patches don't make it into Linus's tree because they get lost in the shuffle (like the
Kconfigone), or because they were security issues that hit -stable first (like another one in there).Either way, yes, the rule is that it should be in mainline, or in the pipe to get into mainline (as was the 5 in this patchset.) I just wanted to make sure they made it into there, and didn't get lost.
I had them queued up as well, but I'm being sluggish and Greg got there first.