bcm43xx: make PIO mode usable
Subsystems (3)
PATCH 1/1 bcm43xx: make PIO mode usable
Please apply this to 2.6.17, because it can be used as a tempoary workaround for people with the >1G problem.
--
This patch fixes PIO mode on the softmac bcm43xx
driver. (A dscape patch will follow).
It mainly fixes endianess issues.
This patch is tested on PowerPC32 and i386.
Signed-off-by Michael Buesch <[email protected]>
drivers/net/wireless/bcm43xx/bcm43xx_dma.h +8 -0
@@ -213,6 +213,14 @@void bcm43xx_dma_rx (struct bcm43xx_dmaring *ring) { } +static inline +void bcm43xx_dma_tx_suspend (struct bcm43xx_dmaring *ring) +{ +} +static inline +void bcm43xx_dma_tx_resume (struct bcm43xx_dmaring *ring) +{ +}#endif /* CONFIG_BCM43XX_DMA */ #endif /* BCM43xx_DMA_H_ */
drivers/net/wireless/bcm43xx/bcm43xx_pio.c +62 -30
220 lines not on this page · raw message
drivers/net/wireless/bcm43xx/bcm43xx_pio.h +14 -2
@@ -14,8 +14,8 @@#define BCM43xx_PIO_RXCTL 0x08#define BCM43xx_PIO_RXDATA 0x0A -#define BCM43xx_PIO_TXCTL_WRITEHI (1 << 0) -#define BCM43xx_PIO_TXCTL_WRITELO (1 << 1) +#define BCM43xx_PIO_TXCTL_WRITELO (1 << 0) +#define BCM43xx_PIO_TXCTL_WRITEHI (1 << 1)#define BCM43xx_PIO_TXCTL_COMPLETE (1 << 2)#define BCM43xx_PIO_TXCTL_INIT (1 << 3)#define BCM43xx_PIO_TXCTL_SUSPEND (1 << 7)
@@ -95,6 +95,7 @@ u16 offset, u16 value) {bcm43xx_write16 (queue->bcm, queue->mmio_base + offset, value); +mmiowb (); }
@@ -107,6 +108,9 @@ struct bcm43xx_xmitstatus *status);void bcm43xx_pio_rx (struct bcm43xx_pioqueue *queue); +void bcm43xx_pio_tx_suspend (struct bcm43xx_pioqueue *queue); +void bcm43xx_pio_tx_resume (struct bcm43xx_pioqueue *queue); +#else /* CONFIG_BCM43XX_PIO */ static inline
@@ -133,6 +137,14 @@void bcm43xx_pio_rx (struct bcm43xx_pioqueue *queue) { } +static inline +void bcm43xx_pio_tx_suspend (struct bcm43xx_pioqueue *queue) +{ +} +static inline +void bcm43xx_pio_tx_resume (struct bcm43xx_pioqueue *queue) +{ +}#endif /* CONFIG_BCM43XX_PIO */ #endif /* BCM43xx_PIO_H_ */
Signature · 1 line
Greetings Michael.