Skip to contentSkip to conversation

s390: fix slab debugging.

PATCH In review Martin Schwidefsky 1 participant 1 message Apr 24, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 7/13 s390: fix slab debugging.

From: Christian Borntraeger <[email protected]>

[patch 7/13] s390: fix slab debugging.

With CONFIG_SLAB_DEBUG=y networking over qeth doesn't work. The problem is that the qib structure embedded in the qeth_irq structure needs an alignment of 256 but kmalloc only guarantees an alignment of 8. When using SLAB debugging the alignment of qeth_irq is not sufficient for the embedded qib structure which causes all users of qdio (qeth and zfcp) to stop working. Allocate qeth_irq structure with __get_free_page. That wastes a small amount of memory (~2500 bytes) per online adapter.

---

 drivers/s390/cio/qdio.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
drivers/s390/cio/qdio.c +3 -3
diff -urpN linux-2.6/drivers/s390/cio/qdio.c linux-2.6-patched/drivers/s390/cio/qdio.c
@@ -1640,7 +1640,7 @@ next:
 
 	}
 	kfree(irq_ptr->qdr);
-	kfree(irq_ptr);
+	free_page((unsigned long) irq_ptr);
 }
 
 static void
@@ -2983,7 +2983,7 @@ qdio_allocate(struct qdio_initialize *in
 	qdio_allocate_do_dbf(init_data);
 
 	/* create irq */
-	irq_ptr = kzalloc(sizeof(struct qdio_irq), GFP_KERNEL | GFP_DMA);
+	irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 
 	QDIO_DBF_TEXT0(0,setup,"irq_ptr:");
 	QDIO_DBF_HEX0(0,setup,&irq_ptr,sizeof(void*));
@@ -2998,7 +2998,7 @@ qdio_allocate(struct qdio_initialize *in
 	/* QDR must be in DMA area since CCW data address is only 32 bit */
 	irq_ptr->qdr=kmalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA);
   	if (!(irq_ptr->qdr)) {
-   		kfree(irq_ptr);
+   		free_page((unsigned long) irq_ptr);
     		QDIO_PRINT_ERR("kmalloc of irq_ptr->qdr failed!\n");
 		return -ENOMEM;
        	}