s390: instruction processing damage handling.
PATCH 11/13 s390: instruction processing damage handling.
From: Heiko Carstens <[email protected]>
[patch 11/13] s390: instruction processing damage handling.
In case of an instruction processing damage (IPD) machine check in kernel mode the resulting action is always to stop the kernel. This is not necessarily the best solution since a retry of the failing instruction might succeed. Add logic to retry the instruction if no more than 30 instruction processing damage checks occured in the last 5 minutes.
---
drivers/s390/s390mach.c | 33 ++++++++++++++++++++++++++++----- 1 files changed, 28 insertions(+), 5 deletions(-)
drivers/s390/s390mach.c +28 -5
@@ -362,12 +362,19 @@ s390_revalidate_registers(struct mci *mcreturn kill_task; } +#define MAX_IPD_COUNT 29 +#define MAX_IPD_TIME (5 * 60 * 100 * 1000)/* 5 minutes */ +/* * machine check handler. */ void s390_do_machine_check (struct pt_regs *regs) { +static DEFINE_SPINLOCK (ipd_lock); +static unsigned long long last_ipd; +static int ipd_count; +unsigned long long tmp;struct mci *mci;struct mcck_struct *mcck;int umode;
@@ -404,11 +411,27 @@ s390_do_machine_check(struct pt_regs *res390_handle_damage ("processing backup machine " "check with damage." ); } -if (!umode) -s390_handle_damage ("processing backup machine " -"check in kernel mode." ); - mcck->kill_task =1 ; - mcck->mcck_code = *(unsigned long long *) mci; + +/* +* Nullifying exigent condition, therefore we might +* retry this instruction. +*/ + +spin_lock (&ipd_lock); + + tmp =get_clock (); + +if (((tmp - last_ipd) >>12 ) <MAX_IPD_TIME ) + ipd_count++; +else + ipd_count =1 ; + + last_ipd = tmp; + +if (ipd_count ==MAX_IPD_COUNT ) +s390_handle_damage ("too many ipd retries." ); + +spin_unlock (&ipd_lock); }else {/* Processing damage -> stopping machine */
drivers/s390/s390mach.c s390_do_machine_check(struct pt_regs *re · line 422
Quoted 2 lines · Martin Schwidefsky
drivers/s390/s390mach.c +1
-0+ tmp =get_clock ();
s390 has a get_clock()? I guess you don't use i2c much.
We shouldn't use such generic-looking identifiers for arch-specific things.
But I guess you can defer the great renaming to s390_get_clock() until
something actually breaks.
Am Tuesday 25 April 2006 01:58 schrieb Andrew Morton:
Quoted 8 lines
drivers/s390/s390mach.c s390_do_machine_check(struct pt_regs *re · line 422
Quoted 1 line · Martin Schwidefsky
drivers/s390/s390mach.c +1
-0+ tmp =get_clock ();s390 has a
get_clock()? I guess you don't use i2c much.We shouldn't use such generic-looking identifiers for arch-specific things.
But I guess you can defer the great renaming tos390_get_clock()until
something actually breaks.
Many places could probably just use get_cycles() if they don't need sub-cycle resolution. Also such an update could be combined with a move to the new store-clock-fast instruction.
Arnd <><
Quoted 1 line · Martin Schwidefsky
+++
linux-2.6-patched/drivers/s390/s390mach.c2006-04-24 16:47:28.000000000 +0200
...
Quoted 1 line
+#define
MAX_IPD_TIME(5 * 60 * 100 * 1000) /* 5 minutes */
I'm no s390 expert, but shouldn't the above use something like HZ?
Josef 'Jeff' Sipek.
Quoted 6 lines · Josef Sipek
Quoted 1 line · Martin Schwidefsky
+++
linux-2.6-patched/drivers/s390/s390mach.c2006-04-24 16:47:28.000000000 +0200...
Quoted 1 line
+#define
MAX_IPD_TIME(5 * 60 * 100 * 1000) /* 5 minutes */I'm no s390 expert, but shouldn't the above use something like HZ?
Using HZ here feels just wrong to me. MAX_IPD_TIME has nothing to do with the timer frequency. In this case it's used to tell if there were 30 machine checks within the last 5 minutes (in a usec granularity). It's just by accident that this could be expressed using HZ.
(5 * 60 * USEC_PER_SEC) would probably look better...
Quoted 11 lines · Heiko Carstens
Quoted 5 lines
Quoted 1 line
+++
linux-2.6-patched/drivers/s390/s390mach.c2006-04-24 16:47:28.000000000 +0200...
Quoted 1 line
+#define
MAX_IPD_TIME(5 * 60 * 100 * 1000) /* 5 minutes */I'm no s390 expert, but shouldn't the above use something like HZ?
Using HZ here feels just wrong to me.
MAX_IPD_TIMEhas nothing to do with the timer frequency. In this case it's used to tell if there were 30 machine checks within the last 5 minutes (in a usec granularity). It's just by accident that this could be expressed using HZ.
(5 * 60 *USEC_PER_SEC) would probably look better...
Using HZ would be wrong. The check that uses MAX_IPD_TIME compares it against the result of a get_clock() call. That uses the TOD Clock directly, there is no dependency on HZ.
Signature · 8 lines
blue skies, Martin. Martin Schwidefsky Linux for zSeries Development & Services IBM Deutschland Entwicklung GmbH "Reality continues to ruin my life." - Calvin.
Quoted 5 lines · Martin Schwidefsky
Quoted 3 lines · Heiko Carstens
Quoted 3 lines
Quoted 1 line
+++
linux-2.6-patched/drivers/s390/s390mach.c2006-04-24 16:47:28.000000000 +0200...
Quoted 1 line
+#define
MAX_IPD_TIME(5 * 60 * 100 * 1000) /* 5 minutes */
^^^^^^^^^^^^^^^^^^^^ Expression A
Quoted 7 lines
Quoted 7 lines
Quoted 1 line
I'm no s390 expert, but shouldn't the above use something like HZ?
Using HZ here feels just wrong to me.
MAX_IPD_TIMEhas nothing to do with the timer frequency. In this case it's used to tell if there were 30 machine checks within the last 5 minutes (in a usec granularity). It's just by accident that this could be expressed using HZ.
(5 * 60 *USEC_PER_SEC) would probably look better...
^^^^^^^^^^^^^^^^^^^^^^^
Expression B
I'm no s390 expert either, but just wanted to point out that expression B is 10 times larger than expression A, so something's fishy here.
Quoted 3 lines
Using HZ would be wrong. The check that uses
MAX_IPD_TIMEcompares it against the result of aget_clock()call. That uses the TOD Clock directly, there is no dependency on HZ.
Looking at include/asm-s390/timex.h:
#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
makes me wonder if this should be:
#define MAX_IPD_TIME (5 * 60 * CLOCK_TICK_RATE) /* 5 minutes */
Signature · 4 lines
Paulo Marques - www.grupopie.com
Pointy-Haired Boss: I don't see anything that could stand in our way.
Dilbert: Sanity? Reality? The laws of physics?Quoted 13 lines · Paulo Marques
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
+++
linux-2.6-patched/drivers/s390/s390mach.c2006-04-24 16:47:28.000000000 +0200...
Quoted 1 line
+#define
MAX_IPD_TIME(5 * 60 * 100 * 1000) /* 5 minutes */^^^^^^^^^^^^^^^^^^^^ Expression AQuoted 7 lines
Quoted 7 lines
Quoted 1 line
I'm no s390 expert, but shouldn't the above use something like HZ?
Using HZ here feels just wrong to me.
MAX_IPD_TIMEhas nothing to do with the timer frequency. In this case it's used to tell if there were 30 machine checks within the last 5 minutes (in a usec granularity). It's just by accident that this could be expressed using HZ.
(5 * 60 *USEC_PER_SEC) would probably look better...
Quoted 5 lines
^^^^^^^^^^^^^^^^^^^^^^^
Expression BI'm no s390 expert either, but just wanted to point out that expression B is 10 times larger than expression A, so something's fishy here.
Indeed, 5*60*100*1000 is wrong. That should be 5*60*1000*1000. This must have been the week of stupid bugs.. thanks for spotting this.
Quoted 11 lines
Quoted 3 lines
Using HZ would be wrong. The check that uses
MAX_IPD_TIMEcompares it against the result of aget_clock()call. That uses the TOD Clock directly, there is no dependency on HZ.Looking at
include/asm-s390/timex.h:#define
CLOCK_TICK_RATE1193180 /* Underlying HZ */makes me wonder if this should be:
#define
MAX_IPD_TIME(5 * 60 *CLOCK_TICK_RATE) /* 5 minutes */
No. The CLOCK_TICK_RATE is a really strange beast. It sole purpose is to satisfy the calculations in include/linux/jiffies.h. The value itself has no meaning in regard to the TOD clock. 5*60*CLOCK_TICK_RATE evaluates to about 358 seconds. Not what we want.
Signature · 8 lines
blue skies, Martin. Martin Schwidefsky Linux for zSeries Development & Services IBM Deutschland Entwicklung GmbH "Reality continues to ruin my life." - Calvin.
Quoted 4 lines
Quoted 4 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
+#define
MAX_IPD_TIME(5 * 60 * 100 * 1000) /* 5 minutes */^^^^^^^^^^^^^^^^^^^^ Expression AQuoted 1 line
Quoted 1 line
(5 * 60 *
USEC_PER_SEC) would probably look better...
Quoted 8 lines
Quoted 5 lines
^^^^^^^^^^^^^^^^^^^^^^^ Expression BI'm no s390 expert either, but just wanted to point out that expression B is 10 times larger than expression A, so something's fishy here.
Indeed, 5*60*100*1000 is wrong. That should be 5*60*1000*1000. This must have been the week of stupid bugs.. thanks for spotting this.
*sigh*... stupid me. At least this doesn't break anything and with this patch it's still better than before.