Sparse fixes for synclink_cs
PATCH 1/1 Sparse fixes for synclink_cs
Mark a few non-exported functions static.
Signed-off-by Peter Hagervall <[email protected]>
---
synclink_cs.c | 54 ++++++++++++++++++++++---------------------- 1 file changed, 27 insertions(+), 27 deletions(-)
drivers/char/pcmcia/synclink_cs.c +27 -27
@@ -844,7 +844,7 @@ static int bh_action(MGSLPC_INFO *info)return rc; } -void bh_handler (void * Context) +static void bh_handler (void * Context) {MGSLPC_INFO *info = (MGSLPC_INFO *)Context;int action;
@@ -888,7 +888,7 @@ void bh_handler(void* Context) __FILE__,__LINE__,info->device_name); } -void bh_transmit (MGSLPC_INFO *info) +static void bh_transmit (MGSLPC_INFO *info) {struct tty_struct *tty = info->tty;if (debug_level >=DEBUG_LEVEL_BH )
@@ -900,7 +900,7 @@ void bh_transmit(MGSLPC_INFO *info) } } -void bh_status (MGSLPC_INFO *info) +static void bh_status (MGSLPC_INFO *info) { info->ri_chkcount =0 ; info->dsr_chkcount =0 ;
@@ -2305,7 +2305,7 @@ static int mgslpc_ioctl(struct tty_strucreturn ioctl_common (info, cmd, arg); } -int ioctl_common (MGSLPC_INFO *info,unsigned int cmd,unsigned long arg) +static int ioctl_common (MGSLPC_INFO *info,unsigned int cmd,unsigned long arg) {int error;struct mgsl_icount cnow;/* kernel counter temps */
@@ -2877,7 +2877,7 @@ done:return ((count < begin+len-off) ? count : begin+len-off); } -int rx_alloc_buffers (MGSLPC_INFO *info) +static int rx_alloc_buffers (MGSLPC_INFO *info) {/* each buffer has header and data */ info->rx_buf_size =sizeof (RXBUF ) + info->max_frame_size;
@@ -2900,13 +2900,13 @@ int rx_alloc_buffers(MGSLPC_INFO *info)return 0 ; } -void rx_free_buffers (MGSLPC_INFO *info) +static void rx_free_buffers (MGSLPC_INFO *info) {kfree (info->rx_buf); info->rx_buf =NULL ; } -int claim_resources (MGSLPC_INFO *info) +static int claim_resources (MGSLPC_INFO *info) {if (rx_alloc_buffers (info) <0 ) {printk ("Cant allocate rx buffer %s\n" , info->device_name);
@@ -2916,7 +2916,7 @@ int claim_resources(MGSLPC_INFO *info)return 0 ; } -void release_resources (MGSLPC_INFO *info) +static void release_resources (MGSLPC_INFO *info) {if (debug_level >=DEBUG_LEVEL_INFO )printk ("release_resources(%s)\n" , info->device_name);
@@ -2928,7 +2928,7 @@ void release_resources(MGSLPC_INFO *info* * Arguments: info pointer to device instance data */ -void mgslpc_add_device (MGSLPC_INFO *info) +static void mgslpc_add_device (MGSLPC_INFO *info) { info->next_device =NULL ; info->line = mgslpc_device_count;
@@ -2964,7 +2964,7 @@ #ifdef CONFIG_HDLC#endif } -void mgslpc_remove_device (MGSLPC_INFO *remove_info) +static void mgslpc_remove_device (MGSLPC_INFO *remove_info) {MGSLPC_INFO *info = mgslpc_device_list;MGSLPC_INFO *last =NULL ;
@@ -3257,7 +3257,7 @@ static void loopback_enable(MGSLPC_INFOwrite_reg (info,CHA +MODE , val); } -void hdlc_mode (MGSLPC_INFO *info) +static void hdlc_mode (MGSLPC_INFO *info) {unsigned char val;unsigned char clkmode, clksubmode;
@@ -3497,7 +3497,7 @@ void hdlc_mode(MGSLPC_INFO *info)rx_stop (info); } -void rx_stop (MGSLPC_INFO *info) +static void rx_stop (MGSLPC_INFO *info) {if (debug_level >=DEBUG_LEVEL_ISR ) printk("%s(%d):rx_stop(%s)\n",
@@ -3510,7 +3510,7 @@ void rx_stop(MGSLPC_INFO *info) info->rx_overflow =0 ; } -void rx_start (MGSLPC_INFO *info) +static void rx_start (MGSLPC_INFO *info) {if (debug_level >=DEBUG_LEVEL_ISR ) printk("%s(%d):rx_start(%s)\n",
@@ -3526,7 +3526,7 @@ void rx_start(MGSLPC_INFO *info) info->rx_enabled =1 ; } -void tx_start (MGSLPC_INFO *info) +static void tx_start (MGSLPC_INFO *info) {if (debug_level >=DEBUG_LEVEL_ISR ) printk("%s(%d):tx_start(%s)\n",
@@ -3564,7 +3564,7 @@ void tx_start(MGSLPC_INFO *info) info->tx_enabled =1 ; } -void tx_stop (MGSLPC_INFO *info) +static void tx_stop (MGSLPC_INFO *info) {if (debug_level >=DEBUG_LEVEL_ISR ) printk("%s(%d):tx_stop(%s)\n",
@@ -3578,7 +3578,7 @@ void tx_stop(MGSLPC_INFO *info)/* Reset the adapter to a known state and prepare it for further use. */ -void reset_device (MGSLPC_INFO *info) +static void reset_device (MGSLPC_INFO *info) {/* power up both channels (set BIT7) */ write_reg (info,CHA +CCR0 ,0x80 );
@@ -3628,7 +3628,7 @@ void reset_device(MGSLPC_INFO *info)write_reg (info,IPC ,0x05 ); } -void async_mode (MGSLPC_INFO *info) +static void async_mode (MGSLPC_INFO *info) {unsigned char val;
@@ -3799,7 +3799,7 @@ void async_mode(MGSLPC_INFO *info)/* Set the HDLC idle mode for the transmitter. */ -void tx_set_idle (MGSLPC_INFO *info) +static void tx_set_idle (MGSLPC_INFO *info) {/* Note: ESCC2 only supports flags and one idle modes */ if (info->idle_mode ==HDLC_TXIDLE_FLAGS )
@@ -3810,7 +3810,7 @@ void tx_set_idle(MGSLPC_INFO *info)/* get state of the V24 status (input) signals. */ -void get_signals (MGSLPC_INFO *info) +static void get_signals (MGSLPC_INFO *info) {unsigned char status =0 ;
@@ -3832,7 +3832,7 @@ void get_signals(MGSLPC_INFO *info)/* Set the state of DTR and RTS based on contents of * serial_signals member of device extension. */ -void set_signals (MGSLPC_INFO *info) +static void set_signals (MGSLPC_INFO *info) {unsigned char val;
@@ -3856,7 +3856,7 @@ void set_signals(MGSLPC_INFO *info)set_reg_bits (info,CHA +PVR ,PVR_DTR ); } -void rx_reset_buffers (MGSLPC_INFO *info) +static void rx_reset_buffers (MGSLPC_INFO *info) {RXBUF *buf;int i;
@@ -3875,7 +3875,7 @@ void rx_reset_buffers(MGSLPC_INFO *info)* * Returns 1 if frame returned, otherwise 0 */ -int rx_get_frame (MGSLPC_INFO *info) +static int rx_get_frame (MGSLPC_INFO *info) {unsigned short status;RXBUF *buf;
@@ -3961,7 +3961,7 @@ #endifreturn 1 ; } -BOOLEAN register_test (MGSLPC_INFO *info) +static BOOLEAN register_test (MGSLPC_INFO *info) {static unsigned char patterns[] = {0x00 ,0xff ,0xaa ,0x55 ,0x69 ,0x96 ,0x0f };
@@ -3987,7 +3987,7 @@ BOOLEAN register_test(MGSLPC_INFO *info)return rc; } -BOOLEAN irq_test (MGSLPC_INFO *info) +static BOOLEAN irq_test (MGSLPC_INFO *info) {unsigned long end_time;unsigned long flags;
@@ -4022,7 +4022,7 @@ BOOLEAN irq_test(MGSLPC_INFO *info)return info->irq_occurred ? TRUE : FALSE; } -int adapter_test (MGSLPC_INFO *info) +static int adapter_test (MGSLPC_INFO *info) {if (!register_test (info)) { info->init_error = DiagStatus_AddressFailure;
@@ -4044,7 +4044,7 @@ int adapter_test(MGSLPC_INFO *info)return 0 ; } -void trace_block (MGSLPC_INFO *info,const char * data,int count,int xmit) +static void trace_block (MGSLPC_INFO *info,const char * data,int count,int xmit) {int i;int linecount;
@@ -4079,7 +4079,7 @@ void trace_block(MGSLPC_INFO *info,const/* HDLC frame time out * update stats and do tx completion processing */ -void tx_timeout (unsigned long context) +static void tx_timeout (unsigned long context) {MGSLPC_INFO *info = (MGSLPC_INFO *)context;unsigned long flags;