Skip to contentSkip to conversation

tg3: Reset chip when changing MAC address

PATCH Applied Michael Chan 2 participants 2 messages Apr 29, 2006 – Apr 30, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 3/6 tg3: Reset chip when changing MAC address

Do the full chip reset when changing MAC address if ASF is enabled.

ASF sometimes uses a different MAC address than the driver. Without the reset, the ASF MAC address may be overwritten when the driver's MAC address is changed.

drivers/net/tg3.c +17 -3
index a307340..0ccfb63 100644
@@ -5732,9 +5732,23 @@ static int tg3_set_mac_addr(struct net_d
 	if (!netif_running(dev))
 		return 0;
 
-	spin_lock_bh(&tp->lock);
-	__tg3_set_mac_addr(tp);
-	spin_unlock_bh(&tp->lock);
+	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
+		/* Reset chip so that ASF can re-init any MAC addresses it
+		 * needs.
+		 */
+		tg3_netif_stop(tp);
+		tg3_full_lock(tp, 1);
+
+		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+		tg3_init_hw(tp);
+
+		tg3_netif_start(tp);
+		tg3_full_unlock(tp);
+	} else {
+		spin_lock_bh(&tp->lock);
+		__tg3_set_mac_addr(tp);
+		spin_unlock_bh(&tp->lock);
+	}
 
 	return 0;
 }
maintainer Applied
#1 lore raw

From: "Michael Chan" <[email protected]>
Date: Fri, 28 Apr 2006 16:35:35 -0700

Quoted 7 lines

Do the full chip reset when changing MAC address if ASF is enabled.

ASF sometimes uses a different MAC address than the driver. Without the reset, the ASF MAC address may be overwritten when the driver's MAC address is changed.

A little heavy handed, but I can't think of another way to deal with this.

Applied, thanks a lot.