Skip to contentSkip to conversation

rt2x00 drivers: Makefile & CRC

PATCH In review Ivo van Doorn 1 participant 1 message Apr 29, 2006

Subsystems (3)
Networking Network drivers Networking drivers (wireless)
lore
Share & tools
lore

Ivo van Doorn

author
#0 lore raw

PATCH 1/3 rt2x00 drivers: Makefile & CRC

From: Ivo van Doorn <[email protected]>

Change Makefile and KConfig file to add the rt61pci and rt73usb drivers to the list.

The firmware needs to be validated by CRC, for this a crc header has been added to the tree as well.

Signed-off-by Ivo van Doorn <[email protected]>
drivers/net/wireless/d80211/rt2x00/Kconfig +38 -1
diff -uprN wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/Kconfig wireless-dev-rt2x00-drivers/drivers/net/wireless/d80211/rt2x00/Kconfig
@@ -5,7 +5,7 @@ config RT2X00
 	This will enable the experimental support for the Ralink drivers,
 	developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
 
-	These drivers will make use of the DeviceScape ieee80211 stack.
+	These drivers will make use of the Devicescape ieee80211 stack.
 
 config RT2400PCI
 	tristate "Ralink rt2400 pci/pcmcia support"

@@ -53,6 +53,29 @@ config RT2500PCI_DEBUG
 	---help---
 	Enable debugging output.
 
+config RT61PCI
+	tristate "Ralink rt61 pci/pcmcia support"
+	depends on RT2X00 && FW_LOADER && PCI
+	---help---
+	This is an experimental driver for the Ralink rt61 wireless chip.
+
+	When compiled as a module, this driver will be called "rt61pci.ko".
+
+config RT2500PCI_BUTTON
+	bool "Ralink rt61 hardware button support"
+	depends on RT61PCI && X86
+	---help---
+	In some notebooks the rt61 chipset is integrated in the machine,
+	with this option enabled the device will periodically poll the
+	the status of this button and will send and ACPI event when
+	the button has been pressed.
+
+config RT61PCI_DEBUG
+	bool "Ralink rt61 debug output"
+	depends on RT61PCI
+	---help---
+	Enable debugging output.
+
 config RT2500USB
 	tristate "Ralink rt2500 usb support"
 	depends on RT2X00 && USB

@@ -66,3 +89,17 @@ config RT2500USB_DEBUG
 	depends on RT2500USB
 	---help---
 	Enable debugging output.
+
+config RT73USB
+	tristate "Ralink rt73 usb support"
+	depends on RT2X00 && FW_LOADER && USB
+	---help---
+	This is an experimental driver for the Ralink rt73 wireless chip.
+
+	When compiled as a module, this driver will be called "rt73usb.ko".
+
+config RT73USB_DEBUG
+	bool "Ralink rt73 debug output"
+	depends on RT73USB
+	---help---
+	Enable debugging output.
\ No newline at end of file
drivers/net/wireless/d80211/rt2x00/Makefile +3 -1
diff -uprN wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/Makefile wireless-dev-rt2x00-drivers/drivers/net/wireless/d80211/rt2x00/Makefile
@@ -1,3 +1,5 @@
 obj-$(CONFIG_RT2400PCI)		+= rt2400pci.o
 obj-$(CONFIG_RT2500PCI)		+= rt2500pci.o
-obj-$(CONFIG_RT2500USB)		+= rt2500usb.o 
+obj-$(CONFIG_RT61PCI)		+= rt61pci.o
+obj-$(CONFIG_RT2500USB)		+= rt2500usb.o
+obj-$(CONFIG_RT73USB)		+= rt73usb.o
\ No newline at end of file
drivers/net/wireless/d80211/rt2x00/rt2x00crc.h +82 -0

82 lines not on this page · raw message