ppc32 CPM_UART: Fixed break send on SCC
PATCH 1/1 ppc32 CPM_UART: Fixed break send on SCC
SCC uart sends a break sequence each time it is stopped with the CPM_CR_STOP_TX command. That means that each time an application closes the serial device, a break is transmitted. To fix this, graceful tx stop is issued for SCC.
Signed-off-by David Jander <[email protected]>
Signed-off-by Vitaly Bordug <[email protected]>
---
drivers/serial/cpm_uart/cpm_uart_core.c | 6 +++++- include/asm-ppc/commproc.h | 1 + include/asm-ppc/cpm2.h | 2 +- 3 files changed, 7 insertions(+), 2 deletions(-)
drivers/serial/cpm_uart/cpm_uart_core.c +5 -1
@@ -473,7 +473,11 @@ static void cpm_uart_shutdown(struct uar }/* Shut them really down and reinit buffer descriptors */ -cpm_line_cr_cmd (line,CPM_CR_STOP_TX ); +if (IS_SMC (pinfo)) +cpm_line_cr_cmd (line,CPM_CR_STOP_TX ); +else +cpm_line_cr_cmd (line,CPM_CR_GRA_STOP_TX ); +cpm_uart_initbd (pinfo); } }
include/asm-ppc/commproc.h +1 -0
@@ -35,6 +35,7 @@#define CPM_CR_INIT_TX ((ushort)0x0002)#define CPM_CR_HUNT_MODE ((ushort)0x0003)#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)#define CPM_CR_RESTART_TX ((ushort)0x0006)#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007)#define CPM_CR_SET_GADDR ((ushort)0x0008)
include/asm-ppc/cpm2.h +1 -1
@@ -69,7 +69,7 @@#define CPM_CR_INIT_TX ((ushort)0x0002)#define CPM_CR_HUNT_MODE ((ushort)0x0003)#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)#define CPM_CR_RESTART_TX ((ushort)0x0006)#define CPM_CR_SET_GADDR ((ushort)0x0008)#define CPM_CR_START_IDMA ((ushort)0x0009)