Please pull upstream-fixes branch of wireless-2.6
Subsystems (3)
These are fixes intended for 2.6.17...thanks!
---
The following changes since commit d98550e334715b2d9e45f8f0f4e1608720108640:
Linus Torvalds:
Merge branch 'merge' of git://git.kernel.org/.../paulus/powerpc
are found in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git upstream-fixes
Daniel Drake:
softmac: don't reassociate if user asked for deauthentication
softmac: make non-operational after being stopped
David Woodhouse:
bcm43xx: Fix access to non-existent PHY registers
Jean Delvare:
ieee80211: Fix A band channel count (resent)
Michael Buesch:
bcm43xx: fix iwmode crash when down
bcm43xx: Fix array overrun in bcm43xx_geo_init
Stefano Brivio:
bcm43xx: check for valid MAC address in SPROM
drivers/net/wireless/bcm43xx/bcm43xx_main.c | 45 ++++++++++++++--------- drivers/net/wireless/bcm43xx/bcm43xx_main.h | 6 ++- drivers/net/wireless/bcm43xx/bcm43xx_phy.c | 2 + drivers/net/wireless/bcm43xx/bcm43xx_wx.c | 7 +++- include/net/ieee80211.h | 6 ++- include/net/ieee80211softmac.h | 3 +- net/ieee80211/softmac/ieee80211softmac_assoc.c | 17 ++++++++- net/ieee80211/softmac/ieee80211softmac_auth.c | 16 +++++++- net/ieee80211/softmac/ieee80211softmac_module.c | 4 ++ net/ieee80211/softmac/ieee80211softmac_scan.c | 8 ++++ 10 files changed, 84 insertions(+), 30 deletions(-)
drivers/net/wireless/bcm43xx/bcm43xx_main.c +27 -18
@@ -939,9 +939,9 @@ #endifreturn 0 ; } -static void bcm43xx_geo_init (struct bcm43xx_private *bcm) +static int bcm43xx_geo_init (struct bcm43xx_private *bcm) { -struct ieee80211_geo geo; +struct ieee80211_geo *geo;struct ieee80211_channel *chan;int have_a =0 , have_bg =0 ;int i;
@@ -949,7 +949,10 @@ static void bcm43xx_geo_init(struct bcm4struct bcm43xx_phyinfo *phy;const char *iso_country; -memset (&geo,0 ,sizeof (geo)); + geo =kzalloc (sizeof (*geo),GFP_KERNEL ); +if (!geo) +return -ENOMEM ; +for (i =0 ; i < bcm->nr_80211_available; i++) { phy = &(bcm->core_80211_ext[i].phy);switch (phy->type) {
@@ -967,31 +970,36 @@ static void bcm43xx_geo_init(struct bcm4 iso_country =bcm43xx_locale_iso (bcm->sprom.locale);if (have_a) { -for (i =0 , channel =0 ; channel <201 ; channel++) { - chan = &geo.a[i++]; +for (i =0 , channel =IEEE80211_52GHZ_MIN_CHANNEL ; + channel <=IEEE80211_52GHZ_MAX_CHANNEL ; channel++) { + chan = &geo->a[i++]; chan->freq =bcm43xx_channel_to_freq_a (channel); chan->channel = channel; } - geo.a_channels = i; + geo->a_channels = i; }if (have_bg) { -for (i =0 , channel =1 ; channel <15 ; channel++) { - chan = &geo.bg[i++]; +for (i =0 , channel =IEEE80211_24GHZ_MIN_CHANNEL ; + channel <=IEEE80211_24GHZ_MAX_CHANNEL ; channel++) { + chan = &geo->bg[i++]; chan->freq =bcm43xx_channel_to_freq_bg (channel); chan->channel = channel; } - geo.bg_channels = i; + geo->bg_channels = i; } -memcpy (geo.name, iso_country,2 ); +memcpy (geo->name, iso_country,2 );if (0 /*TODO: Outdoor use only */ ) - geo.name[2 ] ='O' ; + geo->name[2 ] ='O' ;else if (0 /*TODO: Indoor use only */ ) - geo.name[2 ] ='I' ; + geo->name[2 ] ='I' ;else - geo.name[2 ] =' ' ; - geo.name[3 ] ='\0' ; + geo->name[2 ] =' ' ; + geo->name[3 ] ='\0' ; + +ieee80211_set_geo (bcm->ieee, geo); +kfree (geo); -ieee80211_set_geo (bcm->ieee, &geo); +return 0 ; }/* DummyTransmission function, as documented on
@@ -3479,16 +3487,17 @@ static int bcm43xx_attach_board(struct b goto err_80211_unwind;bcm43xx_wireless_core_disable (bcm); } + err =bcm43xx_geo_init (bcm); +if (err) + goto err_80211_unwind;bcm43xx_pctl_set_crystal (bcm,0 );/* Set the MAC address in the networking subsystem */ -if (bcm43xx_current_phy (bcm)->type == BCM43xx_PHYTYPE_A) +if (is_valid_ether_addr (bcm->sprom.et1macaddr))memcpy (bcm->net_dev->dev_addr, bcm->sprom.et1macaddr,6 );else memcpy (bcm->net_dev->dev_addr, bcm->sprom.il0macaddr,6 ); -bcm43xx_geo_init (bcm); -snprintf (bcm->nick,IW_ESSID_MAX_SIZE ,"Broadcom %04X" , bcm->chip_id);
drivers/net/wireless/bcm43xx/bcm43xx_main.h +4 -2
@@ -118,12 +118,14 @@ int bcm43xx_channel_to_freq(struct bcm43static inline int bcm43xx_is_valid_channel_a (u8 channel) { -return (channel <=200 ); +return (channel >=IEEE80211_52GHZ_MIN_CHANNEL + && channel <=IEEE80211_52GHZ_MAX_CHANNEL ); }static inline int bcm43xx_is_valid_channel_bg (u8 channel) { -return (channel >=1 && channel <=14 ); +return (channel >=IEEE80211_24GHZ_MIN_CHANNEL + && channel <=IEEE80211_24GHZ_MAX_CHANNEL ); } static inline int bcm43xx_is_valid_channel(struct bcm43xx_private *bcm,
drivers/net/wireless/bcm43xx/bcm43xx_phy.c +1 -1
@@ -1287,7 +1287,7 @@ static void bcm43xx_phy_initg(struct bcmif (radio->revision ==8 )bcm43xx_phy_write (bcm,0x0805 ,0x3230 );bcm43xx_phy_init_pctl (bcm); -if (bcm->chip_id ==0x4306 && bcm->chip_package !=2 ) { +if (bcm->chip_id ==0x4306 && bcm->chip_package ==2 ) {bcm43xx_phy_write (bcm,0x0429 ,bcm43xx_phy_read (bcm,0x0429 ) &0xBFFF ); bcm43xx_phy_write(bcm, 0x04C3,
drivers/net/wireless/bcm43xx/bcm43xx_wx.c +5 -2
@@ -182,8 +182,11 @@ static int bcm43xx_wx_set_mode(struct ne mode = BCM43xx_INITIAL_IWMODE;bcm43xx_lock_mmio (bcm, flags); -if (bcm->ieee->iw_mode != mode) -bcm43xx_set_iwmode (bcm, mode); +if (bcm->initialized) { +if (bcm->ieee->iw_mode != mode) +bcm43xx_set_iwmode (bcm, mode); + }else + bcm->ieee->iw_mode = mode;bcm43xx_unlock_mmio (bcm, flags);return 0 ;
include/net/ieee80211.h +4 -2
@@ -955,11 +955,13 @@ #define CFG_IEEE80211_RTS (1<<2)#define IEEE80211_24GHZ_MIN_CHANNEL 1#define IEEE80211_24GHZ_MAX_CHANNEL 14 -#define IEEE80211_24GHZ_CHANNELS 14 +#define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \ + IEEE80211_24GHZ_MIN_CHANNEL + 1)#define IEEE80211_52GHZ_MIN_CHANNEL 34#define IEEE80211_52GHZ_MAX_CHANNEL 165 -#define IEEE80211_52GHZ_CHANNELS 131 +#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \ + IEEE80211_52GHZ_MIN_CHANNEL + 1)enum {IEEE80211_CH_PASSIVE_ONLY = (1 <<0 ),
include/net/ieee80211softmac.h +2 -1
@@ -204,7 +204,8 @@ struct ieee80211softmac_device {/* couple of flags */ u8 scanning:1, /* protects scanning from being done multiple times at once */ - associated:1; + associated:1, + running:1;struct ieee80211softmac_scaninfo *scaninfo;struct ieee80211softmac_assoc_info associnfo;
net/ieee80211/softmac/ieee80211softmac_assoc.c +15 -2
@@ -51,11 +51,12 @@ ieee80211softmac_assoc(struct ieee80211sspin_lock_irqsave (&mac->lock, flags); mac->associnfo.associating =1 ; mac->associated =0 ;/* just to make sure */ -spin_unlock_irqrestore (&mac->lock, flags);/* Set a timer for timeout */ /* FIXME: make timeout configurable */ -schedule_delayed_work (&mac->associnfo.timeout,5 *HZ ); +if (likely (mac->running)) +schedule_delayed_work (&mac->associnfo.timeout,5 *HZ ); +spin_unlock_irqrestore (&mac->lock, flags); }void
@@ -319,6 +320,9 @@ ieee80211softmac_handle_assoc_response(su16 status =le16_to_cpup (&resp->status);struct ieee80211softmac_network *network =NULL ;unsigned long flags; + +if (unlikely (!mac->running)) +return -ENODEV ;spin_lock_irqsave (&mac->lock, flags);
@@ -377,10 +381,16 @@ ieee80211softmac_handle_disassoc(struct {struct ieee80211softmac_device *mac =ieee80211_priv (dev);unsigned long flags; + +if (unlikely (!mac->running)) +return -ENODEV ; +if (memcmp (disassoc->header.addr2, mac->associnfo.bssid,ETH_ALEN ))return 0 ; +if (memcmp (disassoc->header.addr1, mac->dev->dev_addr,ETH_ALEN ))return 0 ; + dprintk(KERN_INFO PFX "got disassoc frame\n");netif_carrier_off (dev);spin_lock_irqsave (&mac->lock, flags);
@@ -400,6 +410,9 @@ ieee80211softmac_handle_reassoc_req(strustruct ieee80211softmac_device *mac =ieee80211_priv (dev);struct ieee80211softmac_network *network; +if (unlikely (!mac->running)) +return -ENODEV ; + network =ieee80211softmac_get_network_by_bssid (mac, resp->header.addr3);if (!network) { dprintkl(KERN_INFO PFX "reassoc request from unknown network\n");
net/ieee80211/softmac/ieee80211softmac_auth.c +14 -2
@@ -86,6 +86,11 @@ ieee80211softmac_auth_queue(void *data)/* Lock and set flags */ spin_lock_irqsave (&mac->lock, flags); +if (unlikely (!mac->running)) { +/* Prevent reschedule on workqueue flush */ +spin_unlock_irqrestore (&mac->lock, flags); +return ; + } net->authenticated =0 ; net->authenticating =1 ;/* add a timeout call so we eventually give up waiting for an auth reply */
@@ -124,6 +129,9 @@ ieee80211softmac_auth_resp(struct net_deunsigned long flags;u8 * data; +if (unlikely (!mac->running)) +return -ENODEV ; +/* Find correct auth queue item */ spin_lock_irqsave (&mac->lock, flags);list_for_each (list_ptr, &mac->auth_queue) {
@@ -298,8 +306,6 @@ ieee80211softmac_deauth_from_net(struct/* can't transmit data right now... */ netif_carrier_off (mac->dev); -/* let's try to re-associate */ -schedule_work (&mac->associnfo.work);spin_unlock_irqrestore (&mac->lock, flags); }
@@ -338,6 +344,9 @@ ieee80211softmac_deauth_resp(struct net_struct ieee80211softmac_network *net =NULL ;struct ieee80211softmac_device *mac =ieee80211_priv (dev); +if (unlikely (!mac->running)) +return -ENODEV ; +if (!deauth) {dprintk ("deauth without deauth packet. eek!\n" );return 0 ;
@@ -360,5 +369,8 @@ ieee80211softmac_deauth_resp(struct net_ }ieee80211softmac_deauth_from_net (mac, net); + +/* let's try to re-associate */ +schedule_work (&mac->associnfo.work);return 0 ; }
net/ieee80211/softmac/ieee80211softmac_module.c +4 -0
@@ -89,6 +89,8 @@ ieee80211softmac_clear_pending_work(struieee80211softmac_wait_for_scan (sm);spin_lock_irqsave (&sm->lock, flags); + sm->running =0 ; +/* Free all pending assoc work items */ cancel_delayed_work (&sm->associnfo.work);
@@ -204,6 +206,8 @@ void ieee80211softmac_start(struct net_dassert (0 );if (mac->txrates_change) mac->txrates_change (dev, change, &oldrates); + + mac->running =1 ; }EXPORT_SYMBOL_GPL (ieee80211softmac_start);
net/ieee80211/softmac/ieee80211softmac_scan.c +8 -0
@@ -115,7 +115,15 @@ void ieee80211softmac_scan(void *d)// TODO: is this if correct, or should we do this only if scanning from assoc request? if (sm->associnfo.req_essid.len)ieee80211softmac_send_mgt_frame (sm, &sm->associnfo.req_essid,IEEE80211_STYPE_PROBE_REQ ,0 ); + +spin_lock_irqsave (&sm->lock, flags); +if (unlikely (!sm->running)) { +/* Prevent reschedule on workqueue flush */ +spin_unlock_irqrestore (&sm->lock, flags); +break ; + }schedule_delayed_work (&si->softmac_scan,IEEE80211SOFTMAC_PROBE_DELAY ); +spin_unlock_irqrestore (&sm->lock, flags);return ; }else {dprintk (PFX "Not probing Channel %d (not allowed here)\n" , si->channels[current_channel_idx].channel);
Signature · 2 lines
John W. Linville [email protected]
Please pull upstream branch of wireless-2.6
These are patches intended for the next release (i.e. 2.6.18)...thanks!
---
The following changes since commit fd5226a72694d1c0abe1cc39711a86f1754e637d:
John W. Linville:
Merge branch 'upstream-fixes' into upstream
are found in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git upstream
Adrian Bunk:
ieee80211_wx.c: remove dead code
Daniel Drake:
softmac: deauthentication implies deassociation
softmac: suggest per-frame-type TX rate
Michal Schmidt:
wireless/airo: minimal WPA awareness
Pavel Roskin:
orinoco: unregister network device before releasing PCMCIA resources
orinoco: report more relevant data on startup
orinoco: simplify locking, fix error handling in PCMCIA resume
orinoco: eliminate the suspend/resume functions if CONFIG_PM is unset
orinoco: don't put PCI resource data to the network device
Stefano Brivio:
bcm43xx: fix whitespace
bcm43xx: add PCI ID for bcm4319
drivers/net/wireless/airo.c | 2 drivers/net/wireless/bcm43xx/bcm43xx_main.c | 8 +- drivers/net/wireless/orinoco_cs.c | 33 ++---- drivers/net/wireless/orinoco_nortel.c | 5 + drivers/net/wireless/orinoco_pci.c | 5 + drivers/net/wireless/orinoco_pci.h | 31 +----- drivers/net/wireless/orinoco_plx.c | 5 + drivers/net/wireless/orinoco_tmd.c | 5 + drivers/net/wireless/spectrum_cs.c | 33 ++---- include/net/ieee80211softmac.h | 38 ++++++- net/ieee80211/ieee80211_wx.c | 2 net/ieee80211/softmac/ieee80211softmac_assoc.c | 72 +++++++------- net/ieee80211/softmac/ieee80211softmac_auth.c | 3 + net/ieee80211/softmac/ieee80211softmac_module.c | 117 +++++++++++++++++++---- net/ieee80211/softmac/ieee80211softmac_priv.h | 6 + net/ieee80211/softmac/ieee80211softmac_wx.c | 6 + 16 files changed, 222 insertions(+), 149 deletions(-)
drivers/net/wireless/airo.c +1 -1
@@ -2768,7 +2768,7 @@ static int airo_test_wpa_capable(struct/* Only firmware versions 5.30.17 or better can do WPA */ if ((cap_rid.softVer >0x530 ) - || ((cap_rid.softVer ==0x530 ) && (cap_rid.softSubVer >=0x17 ))) { + || ((cap_rid.softVer ==0x530 ) && (cap_rid.softSubVer >=17 ))) {airo_print_info (name,"WPA is supported." );return 1 ; }
drivers/net/wireless/bcm43xx/bcm43xx_main.c +5 -3
@@ -128,13 +128,15 @@ #endif /* CONFIG_BCM43XX_DEBUG*/static struct pci_device_id bcm43xx_pci_tbl[] = {/* Broadcom 4303 802.11b */ {PCI_VENDOR_ID_BROADCOM ,0x4301 ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 ,0 }, -/* Broadcom 4307 802.11b */ +/* Broadcom 4307 802.11b */ {PCI_VENDOR_ID_BROADCOM ,0x4307 ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 ,0 }, -/* Broadcom 4318 802.11b/g */ +/* Broadcom 4318 802.11b/g */ {PCI_VENDOR_ID_BROADCOM ,0x4318 ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 ,0 }, +/* Broadcom 4319 802.11a/b/g */ + {PCI_VENDOR_ID_BROADCOM ,0x4319 ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 ,0 },/* Broadcom 4306 802.11b/g */ {PCI_VENDOR_ID_BROADCOM ,0x4320 ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 ,0 }, -/* Broadcom 4306 802.11a */ +/* Broadcom 4306 802.11a */ // { PCI_VENDOR_ID_BROADCOM, 0x4321, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Broadcom 4309 802.11a/b/g */ {PCI_VENDOR_ID_BROADCOM ,0x4324 ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 ,0 },
drivers/net/wireless/orinoco_cs.c +10 -23
@@ -147,14 +147,11 @@ static void orinoco_cs_detach(struct pcm {struct net_device *dev = link->priv; +if (link->dev_node) +unregister_netdev (dev); +orinoco_cs_release (link); -DEBUG (0 ,PFX "detach: link=%p link->dev_node=%p\n" , link, link->dev_node); -if (link->dev_node) { -DEBUG (0 ,PFX "About to unregister net device %p\n" , - dev); -unregister_netdev (dev); - }free_orinocodev (dev); }/* orinoco_cs_detach */
@@ -346,19 +343,10 @@ orinoco_cs_config(struct pcmcia_device *net_device has been registered */ /* Finally, report what we've done */ -printk (KERN_DEBUG "%s: index 0x%02x: " , - dev->name, link->conf.ConfigIndex); -if (link->conf.Vpp) -printk (", Vpp %d.%d" , link->conf.Vpp /10 , - link->conf.Vpp %10 ); -printk (", irq %d" , link->irq.AssignedIRQ); -if (link->io.NumPorts1) -printk (", io 0x%04x-0x%04x" , link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 -1 ); -if (link->io.NumPorts2) -printk (" & 0x%04x-0x%04x" , link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 -1 ); -printk ("\n" ); +printk (KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " +"0x%04x-0x%04x\n" , dev->name, dev->class_dev.dev->bus_id, + link->irq.AssignedIRQ, link->io.BasePort1, + link->io.BasePort1 + link->io.NumPorts1 -1 );return 0 ;
@@ -427,7 +415,6 @@ static int orinoco_cs_resume(struct pcmcstruct orinoco_private *priv =netdev_priv (dev);struct orinoco_pccard *card = priv->card;int err =0 ; -unsigned long flags;if (!test_bit (0 , &card->hard_reset_in_progress)) { err =orinoco_reinit_firmware (dev);
@@ -437,7 +424,7 @@ static int orinoco_cs_resume(struct pcmcreturn -EIO ; } -spin_lock_irqsave (&priv->lock, flags); +spin_lock (&priv->lock);netif_device_attach (dev); priv->hw_unavailable--;
@@ -449,10 +436,10 @@ static int orinoco_cs_resume(struct pcmc dev->name, err); } -spin_unlock_irqrestore (&priv->lock, flags); +spin_unlock (&priv->lock); } -return 0 ; +return err; }
drivers/net/wireless/orinoco_nortel.c +3 -2
@@ -206,7 +206,6 @@ static int orinoco_nortel_init_one(struc err = -EBUSY ; goto fail_irq; } -orinoco_pci_setup_netdev (dev, pdev,2 ); err =orinoco_nortel_hw_init (card);if (err) {
@@ -227,6 +226,8 @@ static int orinoco_nortel_init_one(struc }pci_set_drvdata (pdev, dev); +printk (KERN_DEBUG "%s: " DRIVER_NAME " at %s\n" , dev->name, +pci_name (pdev));return 0 ;
@@ -265,7 +266,7 @@ static void __devexit orinoco_nortel_remiowrite16 (0 , card->bridge_io +10 );unregister_netdev (dev); -free_irq (dev->irq, dev); +free_irq (pdev->irq, dev);pci_set_drvdata (pdev,NULL );free_orinocodev (dev);pci_iounmap (pdev, priv->hw.iobase);
drivers/net/wireless/orinoco_pci.c +3 -2
@@ -161,7 +161,6 @@ static int orinoco_pci_init_one(struct p err = -EBUSY ; goto fail_irq; } -orinoco_pci_setup_netdev (dev, pdev,0 ); err =orinoco_pci_cor_reset (priv);if (err) {
@@ -176,6 +175,8 @@ static int orinoco_pci_init_one(struct p }pci_set_drvdata (pdev, dev); +printk (KERN_DEBUG "%s: " DRIVER_NAME " at %s\n" , dev->name, +pci_name (pdev));return 0 ;
@@ -204,7 +205,7 @@ static void __devexit orinoco_pci_removestruct orinoco_private *priv =netdev_priv (dev);unregister_netdev (dev); -free_irq (dev->irq, dev); +free_irq (pdev->irq, dev);pci_set_drvdata (pdev,NULL );free_orinocodev (dev);pci_iounmap (pdev, priv->hw.iobase);
drivers/net/wireless/orinoco_pci.h +5 -26
@@ -18,32 +18,7 @@ struct orinoco_pci_card {void __iomem *attr_io; }; -/* Set base address or memory range of the network device based on -* the PCI device it's using. Specify BAR of the "main" resource. -* To be used after request_irq(). */ -static inline void orinoco_pci_setup_netdev (struct net_device *dev, -struct pci_dev *pdev,int bar) -{ -char *range_type; -unsigned long start =pci_resource_start (pdev, bar); -unsigned long len =pci_resource_len (pdev, bar); -unsigned long flags =pci_resource_flags (pdev, bar); -unsigned long end = start + len -1 ; - - dev->irq = pdev->irq; -if (flags &IORESOURCE_IO ) { - dev->base_addr = start; - range_type ="ports" ; - }else { - dev->mem_start = start; - dev->mem_end = end; - range_type ="memory" ; - } - - printk(KERN_DEBUG PFX "%s: irq %d, %s 0x%lx-0x%lx\n", - pci_name(pdev), pdev->irq, range_type, start, end); -} - +#ifdef CONFIG_PM static int orinoco_pci_suspend (struct pci_dev *pdev,pm_message_t state) {struct net_device *dev =pci_get_drvdata (pdev);
@@ -121,5 +96,9 @@ static int orinoco_pci_resume(struct pcireturn 0 ; } +#else +#define orinoco_pci_suspend NULL +#define orinoco_pci_resume NULL +#endif #endif /* _ORINOCO_PCI_H */
drivers/net/wireless/orinoco_plx.c +3 -2
@@ -245,7 +245,6 @@ static int orinoco_plx_init_one(struct p err = -EBUSY ; goto fail_irq; } -orinoco_pci_setup_netdev (dev, pdev,2 ); err =orinoco_plx_hw_init (card);if (err) {
@@ -266,6 +265,8 @@ static int orinoco_plx_init_one(struct p }pci_set_drvdata (pdev, dev); +printk (KERN_DEBUG "%s: " DRIVER_NAME " at %s\n" , dev->name, +pci_name (pdev));return 0 ;
@@ -301,7 +302,7 @@ static void __devexit orinoco_plx_removestruct orinoco_pci_card *card = priv->card;unregister_netdev (dev); -free_irq (dev->irq, dev); +free_irq (pdev->irq, dev);pci_set_drvdata (pdev,NULL );free_orinocodev (dev);pci_iounmap (pdev, priv->hw.iobase);
drivers/net/wireless/orinoco_tmd.c +3 -2
@@ -147,7 +147,6 @@ static int orinoco_tmd_init_one(struct p err = -EBUSY ; goto fail_irq; } -orinoco_pci_setup_netdev (dev, pdev,2 ); err =orinoco_tmd_cor_reset (priv);if (err) {
@@ -162,6 +161,8 @@ static int orinoco_tmd_init_one(struct p }pci_set_drvdata (pdev, dev); +printk (KERN_DEBUG "%s: " DRIVER_NAME " at %s\n" , dev->name, +pci_name (pdev));return 0 ;
@@ -194,7 +195,7 @@ static void __devexit orinoco_tmd_removestruct orinoco_pci_card *card = priv->card;unregister_netdev (dev); -free_irq (dev->irq, dev); +free_irq (pdev->irq, dev);pci_set_drvdata (pdev,NULL );free_orinocodev (dev);pci_iounmap (pdev, priv->hw.iobase);
drivers/net/wireless/spectrum_cs.c +10 -23
@@ -625,14 +625,11 @@ static void spectrum_cs_detach(struct pc {struct net_device *dev = link->priv; +if (link->dev_node) +unregister_netdev (dev); +spectrum_cs_release (link); -DEBUG (0 ,PFX "detach: link=%p link->dev_node=%p\n" , link, link->dev_node); -if (link->dev_node) { -DEBUG (0 ,PFX "About to unregister net device %p\n" , - dev); -unregister_netdev (dev); - }free_orinocodev (dev); }/* spectrum_cs_detach */
@@ -825,19 +822,10 @@ spectrum_cs_config(struct pcmcia_devicenet_device has been registered */ /* Finally, report what we've done */ -printk (KERN_DEBUG "%s: index 0x%02x: " , - dev->name, link->conf.ConfigIndex); -if (link->conf.Vpp) -printk (", Vpp %d.%d" , link->conf.Vpp /10 , - link->conf.Vpp %10 ); -printk (", irq %d" , link->irq.AssignedIRQ); -if (link->io.NumPorts1) -printk (", io 0x%04x-0x%04x" , link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 -1 ); -if (link->io.NumPorts2) -printk (" & 0x%04x-0x%04x" , link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 -1 ); -printk ("\n" ); +printk (KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " +"0x%04x-0x%04x\n" , dev->name, dev->class_dev.dev->bus_id, + link->irq.AssignedIRQ, link->io.BasePort1, + link->io.BasePort1 + link->io.NumPorts1 -1 );return 0 ;
@@ -878,11 +866,10 @@ spectrum_cs_suspend(struct pcmcia_device {struct net_device *dev = link->priv;struct orinoco_private *priv =netdev_priv (dev); -unsigned long flags;int err =0 ;/* Mark the device as stopped, to block IO until later */ -spin_lock_irqsave (&priv->lock, flags); +spin_lock (&priv->lock); err =__orinoco_down (dev);if (err)
@@ -892,9 +879,9 @@ spectrum_cs_suspend(struct pcmcia_devicenetif_device_detach (dev); priv->hw_unavailable++; -spin_unlock_irqrestore (&priv->lock, flags); +spin_unlock (&priv->lock); -return 0 ; +return err; } static int
include/net/ieee80211softmac.h +33 -5
@@ -86,6 +86,9 @@ struct ieee80211softmac_assoc_info {/* BSSID we're trying to associate to */ char bssid[ETH_ALEN ]; + +/* Rates supported by the network */ +struct ieee80211softmac_ratesinfo supported_rates;/* some flags. * static_essid is valid if the essid is constant,
@@ -132,23 +135,26 @@ #define IEEE80211SOFTMAC_ASSOC_SCAN_RETRstruct ieee80211softmac_txrates {/* The Bit-Rate to be used for multicast frames. */ u8 mcast_rate; -/* The Bit-Rate to be used for multicast fallback -* (If the device supports fallback and hardware-retry) -*/ -u8 mcast_fallback; + +/* The Bit-Rate to be used for multicast management frames. */ +u8 mgt_mcast_rate; +/* The Bit-Rate to be used for any other (normal) data packet. */ u8 default_rate;/* The Bit-Rate to be used for default fallback * (If the device supports fallback and hardware-retry) */ u8 default_fallback; + +/* This is the rate that the user asked for */ +u8 user_rate; };/* Bits for txrates_change callback. */ #define IEEE80211SOFTMAC_TXRATECHG_DEFAULT (1 << 0)/* default_rate */ #define IEEE80211SOFTMAC_TXRATECHG_DEFAULT_FBACK (1 << 1)/* default_fallback */ #define IEEE80211SOFTMAC_TXRATECHG_MCAST (1 << 2)/* mcast_rate */ -#define IEEE80211SOFTMAC_TXRATECHG_MCAST_FBACK (1 << 3)/* mcast_fallback */ +#define IEEE80211SOFTMAC_TXRATECHG_MGT_MCAST (1 << 3)/* mgt_mcast_rate */ struct ieee80211softmac_device {/* 802.11 structure for data stuff */
@@ -250,6 +256,28 @@ extern void ieee80211softmac_fragment_lo* Note that the rates need to be sorted. */ extern void ieee80211softmac_set_rates (struct net_device *dev,u8 count,u8 *rates); +/* Helper function which advises you the rate at which a frame should be +* transmitted at. */ +static inline u8 ieee80211softmac_suggest_txrate (struct ieee80211softmac_device *mac, +int is_multicast, +int is_mgt) +{ +struct ieee80211softmac_txrates *txrates = &mac->txrates; + +if (!mac->associated) +return txrates->mgt_mcast_rate; + +/* We are associated, sending unicast frame */ +if (!is_multicast) +return txrates->default_rate; + +/* We are associated, sending multicast frame */ +if (is_mgt) +return txrates->mgt_mcast_rate; +else +return txrates->mcast_rate; +} +/* Start the SoftMAC. Call this after you initialized the device * and it is ready to run. */
net/ieee80211/ieee80211_wx.c +1 -1
@@ -503,7 +503,7 @@ int ieee80211_wx_get_encode(struct ieee8 len = sec->key_sizes[key];memcpy (keybuf, sec->keys[key], len); - erq->length = (len >=0 ? len :0 ); + erq->length = len; erq->flags |=IW_ENCODE_ENABLED ;if (ieee->open_wep)
net/ieee80211/softmac/ieee80211softmac_assoc.c +38 -34
130 lines not on this page · raw message
net/ieee80211/softmac/ieee80211softmac_auth.c +3 -0
@@ -279,6 +279,9 @@ ieee80211softmac_deauth_from_net(structstruct list_head *list_ptr;unsigned long flags; +/* deauthentication implies disassociation */ +ieee80211softmac_disassoc (mac); +/* Lock and reset status flags */ spin_lock_irqsave (&mac->lock, flags); net->authenticating =0 ;
net/ieee80211/softmac/ieee80211softmac_module.c +96 -21
153 lines not on this page · raw message
net/ieee80211/softmac/ieee80211softmac_priv.h +5 -1
@@ -116,7 +116,10 @@ ieee80211softmac_get_network_by_essid(st struct ieee80211softmac_essid *essid);/* Rates related */ +int ieee80211softmac_ratesinfo_rate_supported (struct ieee80211softmac_ratesinfo *ri,u8 rate);u8 ieee80211softmac_lower_rate_delta (struct ieee80211softmac_device *mac,u8 rate,int delta); +void ieee80211softmac_init_txrates (struct ieee80211softmac_device *mac); +void ieee80211softmac_recalc_txrates (struct ieee80211softmac_device *mac);static inline u8 lower_rate (struct ieee80211softmac_device *mac,u8 rate) {return ieee80211softmac_lower_rate_delta (mac, rate,1 ); }
@@ -150,7 +153,8 @@ int ieee80211softmac_handle_disassoc(strint ieee80211softmac_handle_reassoc_req (struct net_device * dev,struct ieee80211_reassoc_request * reassoc);void ieee80211softmac_assoc_timeout (void *d); -void ieee80211softmac_disassoc (struct ieee80211softmac_device *mac,u16 reason); +void ieee80211softmac_send_disassoc_req (struct ieee80211softmac_device *mac,u16 reason); +void ieee80211softmac_disassoc (struct ieee80211softmac_device *mac);/* some helper functions */ static inline int ieee80211softmac_scan_handlers_check_self (struct ieee80211softmac_device *sm)
net/ieee80211/softmac/ieee80211softmac_wx.c +3 -3
@@ -211,8 +211,8 @@ ieee80211softmac_wx_set_rate(struct net_if (is_ofdm && !(ieee->modulation &IEEE80211_OFDM_MODULATION )) goto out_unlock; - mac->txrates.default_rate = rate; - mac->txrates.default_fallback =lower_rate (mac, rate); + mac->txrates.user_rate = rate; +ieee80211softmac_recalc_txrates (mac); err =0 ; out_unlock:
@@ -456,7 +456,7 @@ ieee80211softmac_wx_set_mlme(struct net_ }return ieee80211softmac_deauth_req (mac, net, reason);case IW_MLME_DISASSOC : -ieee80211softmac_disassoc (mac, reason); +ieee80211softmac_send_disassoc_req (mac, reason);return 0 ;default :return -EOPNOTSUPP ;
Signature · 2 lines
John W. Linville [email protected]
Quoted 1 line · On Fri, 5 May 2006 21:06:18 -0400 "John W. Linville" <[email protected]>…
These are fixes intended for 2.6.17...thanks!
Jeff is offline for a couple of weeks. Please prepare a pull for Linus.
Quoted 6 lines · Andrew Morton
Quoted 2 lines · On Fri, 5 May 2006 21:06:18 -0400 "John W. Linville" <[email protected]>…
These are fixes intended for 2.6.17...thanks!
Jeff is offline for a couple of weeks. Please prepare a pull for Linus.
Actually, while Jeff is off, Steve Hemminger is supposed to be the network driver overlord ("All bow down before the mighty Shemminger"), so please do synchronize with him.
Of course, that might be just Steve taking a look and telling me "yeah, please pull directly from John".
Linus
Quoted 7 lines · Linus Torvalds
Quoted 5 lines · Andrew Morton
Quoted 2 lines · On Fri, 5 May 2006 21:06:18 -0400 "John W. Linville" <[email protected]>…
These are fixes intended for 2.6.17...thanks!
Quoted 9 lines
Quoted 2 lines
Jeff is offline for a couple of weeks. Please prepare a pull for Linus.
Actually, while Jeff is off, Steve Hemminger is supposed to be the network driver overlord ("All bow down before the mighty Shemminger"), so please do synchronize with him.
Of course, that might be just Steve taking a look and telling me "yeah, please pull directly from John".
Linus
I had a bunch ready for monday...
Quoted 15 lines · Stephen Hemminger
Quoted 14 lines · Linus Torvalds
Quoted 7 lines · Andrew Morton
Quoted 2 lines · On Fri, 5 May 2006 21:06:18 -0400 "John W. Linville" <[email protected]>…
These are fixes intended for 2.6.17...thanks!
Jeff is offline for a couple of weeks. Please prepare a pull for Linus.
Actually, while Jeff is off, Steve Hemminger is supposed to be the network driver overlord ("All bow down before the mighty Shemminger"), so please do synchronize with him.
Quoted 6 lines
Quoted 5 lines
Of course, that might be just Steve taking a look and telling me "yeah, please pull directly from John".
Linus
I had a bunch ready for monday...
So, Stephen, you will pull from me and have Linus pull all from you? Just trying to clarify the plan... :-)
It makes no difference to me. I'll include the git url "just in case":
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git upstream-fixes
Thanks!
John
Signature · 2 lines
John W. Linville [email protected]