Oops in au8830 driver on x86-64
Hi,
I bought a used sound card for secondary uses, it happens to be a Diamond Sound Monster MX300 with an Aureal Vortex2 chip. Unfortunately, after putting it into the machine, it doesn't boot up, I get an oops that prevents booting further. I have hand-copied the relevant info:
RIP: {:snd_au8830:snd_vortex_probe+411}
...
Call Trace: {sprintf+81} {__wake_up+56}{pci_device_probe+256} {driver_probe_device+82}
{__driver_attach+142} {__driver_attach+0}
{bus_for_each_dev+67} {bus_add_driver+118}
{__pci_register_driver+142} {stop_machine_run+58}
{sys_init_module+278} {system_call+126}
The kernel is not tainted.
$ uname -a Linux xxxxxx 2.6.16-1.2111_FC5 #1 SMP Thu May 4 21:16:04 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
System is an FC5/x86-64 updated to the latest erratas.
There is only one sprintf() call in the whole au88x0 driver source, line 328 in au88x0.c. Why it fails for x86-64 is beyond my understanding. This is the code in question:
327: strcpy(card->shortname, CARD_NAME_SHORT);
328: sprintf(card->longname, "%s at 0x%lx irq %i",
card->shortname, chip->io, chip->irq);
Pointer "card" exists or the driver would have failed earlier allocating or dereferencing it. card->longname is 80 byte large, length of the string is at most 44 byte:
12 byte (format string fillings + terminating NULL) +
6 byte (CARD_NAME_SHORT) +
6 byte (unsigned long written in hex) +
10 byte (unsigned int written in dec)
I couldn't seek further, I put the card away for now. :-)
Best regards,
Zoltán Böszörményi
Zoltan Boszormenyi írta:
Quoted 30 lines
Hi,
I bought a used sound card for secondary uses, it happens to be a Diamond Sound Monster MX300 with an Aureal Vortex2 chip. Unfortunately, after putting it into the machine, it doesn't boot up, I get an oops that prevents booting further. I have hand-copied the relevant info:
RIP: {:snd_au8830:snd_vortex_probe+411} ... Call Trace: {sprintf+81} {__wake_up+56}{pci_device_probe+256} {driver_probe_device+82}
{__driver_attach+142} {__driver_attach+0}
{bus_for_each_dev+67} {bus_add_driver+118}
{__pci_register_driver+142} {stop_machine_run+58}
{sys_init_module+278} {system_call+126}The kernel is not tainted.
$ uname -a Linux xxxxxx 2.6.16-1.2111_FC5 #1 SMP Thu May 4 21:16:04 EDT 2006 x86_64 x86_64 x86_64 GNU/LinuxSystem is an FC5/x86-64 updated to the latest erratas.
There is only one
sprintf()call in the whole au88x0 driver source, line 328 inau88x0.c. Why it fails for x86-64 is beyond my understanding. This is the code in question:327:
strcpy(card->shortname, CARD_NAME_SHORT);
328: sprintf(card->longname, "%s at 0x%lx irq %i",
Quoted 7 lines
card->shortname, chip->io, chip->irq);Pointer "card" exists or the driver would have failed earlier allocating or dereferencing it.
card->longnameis 80 byte large, length of the string is at most 44 byte:
12 byte (format string fillings + terminating NULL) +
6 byte (CARD_NAME_SHORT) +
6 byte (unsigned long written in hex) +
This is 16, not 6, before anyone complains I can't count. :-)
Quoted 8 lines
10 byte (unsigned int written in dec)
I couldn't seek further, I put the card away for now. :-)
Best regards,
Zoltán Böszörményi
Quoted 2 lines · Zoltan Boszormenyi
I couldn't seek further, I put the card away for now. :-)
First thing I would do is to fix all the compile warnings.
-Andi
Hi,
Andi Kleen írta:
Quoted 10 lines
Quoted 2 lines · Zoltan Boszormenyi
I couldn't seek further, I put the card away for now. :-)
First thing I would do is to fix all the compile warnings.
-Andi
What warnings are you talking about?
...
LD [M] sound/pci/ali5451/snd-ali5451.o LD sound/pci/au88x0/built-in.o CC [M] sound/pci/au88x0/au8810.o CC [M] sound/pci/au88x0/au8820.o CC [M] sound/pci/au88x0/au8830.o LD [M] sound/pci/au88x0/snd-au8810.o LD [M] sound/pci/au88x0/snd-au8820.o LD [M] sound/pci/au88x0/snd-au8830.o LD sound/pci/ca0106/built-in.o CC [M] sound/pci/ca0106/ca0106_main.o
...
Should I do an 'export CFLAGS="-Wall"' before make?
Best regards,
Zoltán Böszörményi
Quoted 11 lines · Zoltan Boszormenyi
Hi,
Andi Kleen írta:
Quoted 6 lines
Quoted 1 line · Zoltan Boszormenyi
I couldn't seek further, I put the card away for now. :-)
First thing I would do is to fix all the compile warnings.
-Andi
What warnings are you talking about?
It was just a general comment. If there aren't any it's harder. I guess you would need to find out where exactly it crashes.
-Andi
Hi,
Andi Kleen írta:
Quoted 14 lines · Zoltan Boszormenyi
Quoted 13 lines
Hi,
Andi Kleen írta:
Quoted 8 lines
Quoted 2 lines · Zoltan Boszormenyi
I couldn't seek further, I put the card away for now. :-)
First thing I would do is to fix all the compile warnings.
-Andi
Quoted 8 lines
Quoted 2 lines
What warnings are you talking about?
It was just a general comment. If there aren't any it's harder. I guess you would need to find out where exactly it crashes.
-Andi
I am going to do it but I have to do some
urgent user space programming first.
Thanks anyway.
Best regards,
Zoltán Böszörményi