Skip to contentSkip to conversation

mcelog ?

DISCUSSION Stephan von Krawczynski 4 participants 5 messages May 15, 2006 – May 22, 2006

lore
Share & tools
lore
#0 lore raw

Hello,

can some kind soul please shortly explain what this message tells me:

HARDWARE ERROR
CPU 1: Machine Check Exception: 4 Bank 4: b60a200170080813
TSC 89cfb4725b17 ADDR 1025cb3f0
This is not a software problem!
Run through mcelog --ascii to decode and contact your hardware vendor

Kernel panic - not syncing: Machine check

Of course I ran mcelog but I don't quite understand how the additional info helps me finding the problem.
Is this a problem with RAM? And if, which one?

The box is a dual opteron with two banks of mem (4 sockets each), each socket holding a 1 GB mem module.

Thanks for any hints.

Signature · 2 lines
Regards,
Stephan
#1 lore raw
Quoted 10 lines · Stephan von Krawczynski

HARDWARE ERROR
CPU 1: Machine Check Exception: 4 Bank 4: b60a200170080813
TSC 89cfb4725b17 ADDR 1025cb3f0
This is not a software problem!
Run through mcelog --ascii to decode and contact your hardware vendor

Kernel panic - not syncing: Machine check

Of course I ran mcelog but I don't quite understand how the additional info helps me finding the problem.
Is this a problem with RAM? And if, which one?

It sounds like a memory error, but there are some other bank4 errors that can crop up. What does mcedecode say?

#2 lore raw
Quoted 8 lines · On Mon, 15 May 2006 08:20:08 -0700 [email protected] wrote:
Quoted 7 lines · Stephan von Krawczynski

HARDWARE ERROR
CPU 1: Machine Check Exception: 4 Bank 4: b60a200170080813
TSC 89cfb4725b17 ADDR 1025cb3f0
This is not a software problem!
Run through mcelog --ascii to decode and contact your hardware vendor

Kernel panic - not syncing: Machine check
Quoted 6 lines
Quoted 3 lines

Of course I ran mcelog but I don't quite understand how the additional info helps me finding the problem.
Is this a problem with RAM? And if, which one?

It sounds like a memory error, but there are some other bank4 errors that can crop up. What does mcedecode say?

Well, here it is:

HARDWARE ERROR
CPU 1 4 northbridge TSC 89cfb4725b17
Northbridge Chipkill ECC error
Chipkill ECC syndrome = 7014
bit32 = err cpu0
bit45 = uncorrected ecc error
bit57 = processor context corrupt
bit61 = error uncorrected
bus error 'local node origin, request didn't time out
generic read mem transaction
memory access, level generic'
STATUS b60a200170080813 MCGSTATUS 4
This is not a software problem!

Is this some sort of mem error?

Thank you for your help

Signature · 2 lines
Regards,
Stephan
#3 lore raw
In reply to Stephan von Krawczynski
Quoted 2 lines · Stephan von Krawczynski

This is not a software problem!
Run through mcelog --ascii to decode and contact your hardware vendor

Since when is linux-kernel your hardware vendor? Would it help if the message was written all upper case?

-Andi

#4 lore raw
In reply to Stephan von Krawczynski
Quoted 12 lines · Stephan von Krawczynski <skraw <at> ithnet.com> writes:

Hello,

can some kind soul please shortly explain what this message tells me:

HARDWARE ERROR
CPU 1: Machine Check Exception: 4 Bank 4: b60a200170080813
TSC 89cfb4725b17 ADDR 1025cb3f0
This is not a software problem!
Run through mcelog --ascii to decode and contact your hardware vendor

Kernel panic - not syncing: Machine check
Quoted 8 lines

Of course I ran mcelog but I don't quite understand how the additional info helps me finding the problem.
Is this a problem with RAM? And if, which one?

The box is a dual opteron with two banks of mem (4 sockets each), each socket holding a 1 GB mem module.

Thanks for any hints.

I got a very similar error on a supermicro H8QC8+ (4way dual-core opteron) during heavy disk writes. It only happened once so far. The error message also mentioned
4 Bank 4: b608a00100000813 (strange that the last 4 digits agree).

Bernd