Skip to contentSkip to conversation

new pcmcia IDs for hostap - Pretec

PATCH In review Marcin Juszkiewicz 1 participant 1 message May 16, 2006

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 5/6 new pcmcia IDs for hostap - Pretec

I use two Zaurus palmtops - one run 2.4.18 kernel (it's sl-5500) and second run 2.6.16. Both are running under control of OpenZaurus distribution (I'm Release Manager of it).

When I use pcmcia-cs then my Pretec WiFi card is handled by hostap driver and everything is working fine. Recently I switched to pcmciautils and after card insert orinoco modules are loaded. I prefer to use hostap modules because they work the same under 2.4 and 2.6 kernels (with orinoco I have to use 0.13e ones because never ones does not work under 2.4/arm).

This patch adds definition of my card to hostap_cs cardlist. It was tested on Sharp Zaurus C760 palmtop running 2.6.16 + pcmciautils 010 + udev 084

---
 drivers/net/wireless/hostap/hostap_cs.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/net/wireless/hostap/hostap_cs.c +3 -0
Index: linux/drivers/net/wireless/hostap/hostap_cs.c
===================================================================
@@ -932,6 +932,9 @@
 	PCMCIA_DEVICE_PROD_ID12("PLANEX COMMUNICATION INC", 
 			"PLANEX GW-CF11X Wireless CF Card",
 			0x4703cf68, 0xfad7318d),
+	PCMCIA_DEVICE_PROD_ID123(
+			"Pretec", "CompactWLAN Card 802.11b", "2.5",
+			0x1cadd3e5, 0xe697636c, 0x7a5bfcf1),
 	PCMCIA_DEVICE_NULL
 };
 MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
Signature · 5 lines
JID: hrw-jabber.org
Sharp Zaurus C-760 (OZ 3.5.x)
OpenEmbedded/OpenZaurus/OPIE developer

         You can close your eyes to reality, but not to memories.