Skip to contentSkip to conversation

2.6.17-rc5-git1: regression: resume from suspend(RAM) fails: libata issue

DISCUSSION Mark Lord 3 participants 3 messages May 26, 2006 SCSI

lore
Share & tools
lore

Mark Lord

author
#0 lore raw

My ata_piix based Notebook (Dell i9300) suspends/resumes perfectly (RAM or disk) with 2.6.16.xx kernels, but fails resume on 2.6.17-rc5-git1 (the first 2.6.17-* I've attempted on this machine).

On resume from RAM, after a 30-second-ish timeout, the screen comes on but the hard disk is NOT accessible. "dmesg" in an already-open window shows this (typed in from handwritten notes):

sd 0:0:0:0: SCSI error: return code = 0x40000
end_request: I/O error, /dev/sda, sector nnnnnnn
sd 0:0:0:0: SCSI error: return code = 0x40000
end_request: I/O error, /dev/sda, sector nnnnnnn
sd 0:0:0:0: SCSI error: return code = 0x40000
end_request: I/O error, /dev/sda, sector nnnnnnn
sd 0:0:0:0: SCSI error: return code = 0x40000
end_request: I/O error, /dev/sda, sector nnnnnnn
sd 0:0:0:0: SCSI error: return code = 0x40000
end_request: I/O error, /dev/sda, sector nnnnnnn
sd 0:0:0:0: SCSI error: return code = 0x40000
end_request: I/O error, /dev/sda, sector nnnnnnn
sd 0:0:0:0: SCSI error: return code = 0x40000
end_request: I/O error, /dev/sda, sector nnnnnnn

(the nnnnnnn was actually a real number, different on each message).

Is there a fix already floating around for this?

Cheers

#1 lore raw
Quoted 6 lines · Mark Lord

My ata_piix based Notebook (Dell i9300) suspends/resumes perfectly (RAM or disk)
with 2.6.16.xx kernels, but fails resume on 2.6.17-rc5-git1 (the first 2.6.17-*
I've attempted on this machine).

Quoted 6 lines

On resume from RAM, after a 30-second-ish timeout, the screen comes on but the hard disk is NOT accessible. "dmesg" in an already-open window shows this (typed in from handwritten notes):

sd 0:0:0:0: SCSI error: return code = 0x40000
end_request: I/O error, /dev/sda, sector nnnnnnn

...

Ahh.. the fix for this was posted earlier today by Forrest Zhao. But his patch is for libata-dev, and doesn't apply as-is on 2.6.17-rc*

Here is a modified version of Forrest's original patch, for 2.6.17-rc5-git1. It seems to have fixed the resume issue on my machine here,
so that things are now working as they were in the unpatched 2.6.16 kernels.

Can we get (something like) this into 2.6.17, pretty please?

---

drivers/scsi/ata_piix.c +18 -1
@@ -90,6 +90,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
 #include <linux/libata.h>
 
 #define DRV_NAME	"ata_piix"
@@ -151,6 +152,7 @@ static int piix_pata_probe_reset(struct 
 static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes);
 static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
 static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
+static int piix_scsi_device_resume(struct scsi_device *sdev);
 
 static unsigned int in_module_init = 1;
 
@@ -220,7 +222,7 @@ static struct scsi_host_template piix_sh
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
 	.bios_param		= ata_std_bios_param,
-	.resume			= ata_scsi_device_resume,
+	.resume			= piix_scsi_device_resume,
 	.suspend		= ata_scsi_device_suspend,
 };
 
@@ -710,6 +712,21 @@ static void piix_set_dmamode (struct ata
 	}
 }
 
+int piix_scsi_device_resume(struct scsi_device *sdev)
+{
+	struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+	struct ata_device *dev = &ap->device[sdev->id];
+	u8 status;
+
+	status = ata_busy_wait(ap, ATA_BUSY, 200000);
+	if (status & ATA_BUSY) {
+		printk(KERN_ERR "libata port failed to resume "
+				"in 2 secs)\n");
+		return 1;
+	}
+	return ata_device_resume(ap, dev);
+}
+
 #define AHCI_PCI_BAR 5
 #define AHCI_GLOBAL_CTL 0x04
 #define AHCI_ENABLE (1 << 31)
#2 lore raw
Quoted 13 lines · Mark Lord
Quoted 10 lines · Mark Lord

My ata_piix based Notebook (Dell i9300) suspends/resumes perfectly (RAM or disk) with 2.6.16.xx kernels, but fails resume on 2.6.17-rc5-git1 (the first 2.6.17-* I've attempted on this machine).

On resume from RAM, after a 30-second-ish timeout, the screen comes on but the hard disk is NOT accessible. "dmesg" in an already-open window shows this (typed in from handwritten notes):

sd 0:0:0:0: SCSI error: return code = 0x40000
end_request: I/O error, /dev/sda, sector nnnnnnn

...

Quoted 8 lines

Ahh.. the fix for this was posted earlier today by Forrest Zhao. But his patch is for libata-dev, and doesn't apply as-is on 2.6.17-rc*

Here is a modified version of Forrest's original patch, for 2.6.17-rc5-git1. It seems to have fixed the resume issue on my machine here,
so that things are now working as they were in the unpatched 2.6.16 kernels.

Can we get (something like) this into 2.6.17, pretty please?

Definitely not. I've repeatedly explained (and just done so again) why this is very wrong. And you should know why, too, Mark ;-)

The controller resume (ata_pci_device_resume) does nothing controller-specific. More importantly, the controller does not resume the ATA bus, and bring the ATA bus to bus-idle state.

Jeff