Skip to contentSkip to conversation

IPMI: reserve I/O ports separately

PATCH New Corey Minyard 1 participant 1 message May 26, 2006 IPMI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 IPMI: reserve I/O ports separately

This patch is pretty important to get in for IPMI, new systems have been changing the way ACPI and IPMI interact, and this works around the problems for now. This is a temporary fix until we get proper ACPI handling in IPMI.

Fixed releasing already-allocated regions when a later request fails, and forward-ported it to HEAD.

Some BIOSes reserve disjoint I/O regions in their ACPI tables for the IPMI controller. This causes problems when trying to register the entire I/O region. Therefore we must register each I/O port separately.

drivers/char/ipmi/ipmi_si_intf.c +23 -16
index b36eef0..96a9e24 100644
@@ -1184,20 +1184,20 @@ static void port_outl(struct si_sm_io *i
 static void port_cleanup(struct smi_info *info)
 {
 	unsigned int addr = info->io.addr_data;
-	int          mapsize;
+	int          idx;
 
 	if (addr) {
-		mapsize = ((info->io_size * info->io.regspacing)
-			   - (info->io.regspacing - info->io.regsize));
-
-		release_region (addr, mapsize);
+	  	for (idx = 0; idx < info->io_size; idx++) {
+			release_region(addr + idx * info->io.regspacing,
+				       info->io.regsize);
+		}
 	}
 }
 
 static int port_setup(struct smi_info *info)
 {
 	unsigned int addr = info->io.addr_data;
-	int          mapsize;
+	int          idx;
 
 	if (!addr)
 		return -ENODEV;
@@ -1225,16 +1225,23 @@ static int port_setup(struct smi_info *i
 		return -EINVAL;
 	}
 
-	/* Calculate the total amount of memory to claim.  This is an
-	 * unusual looking calculation, but it avoids claiming any
-	 * more memory than it has to.  It will claim everything
-	 * between the first address to the end of the last full
-	 * register. */
-	mapsize = ((info->io_size * info->io.regspacing)
-		   - (info->io.regspacing - info->io.regsize));
-
-	if (request_region(addr, mapsize, DEVICE_NAME) == NULL)
-		return -EIO;
+	/* Some BIOSes reserve disjoint I/O regions in their ACPI
+	 * tables.  This causes problems when trying to register the
+	 * entire I/O region.  Therefore we must register each I/O
+	 * port separately.
+	 */
+  	for (idx = 0; idx < info->io_size; idx++) {
+		if (request_region(addr + idx * info->io.regspacing,
+				   info->io.regsize, DEVICE_NAME) == NULL)
+		{
+			/* Undo allocations */
+			while (idx--) {
+				release_region(addr + idx * info->io.regspacing,
+					       info->io.regsize);
+			}
+			return -EIO;
+		}
+	}
 	return 0;
 }