2.6.17-rc5-mm1
Subsystems (13)
Andrew Morton
Appliedftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
- The git-cfq tree is causing oopses and has been dropped.
- New reiser4 code drop.
- Merged the generic-IRQ handling code.
- Merged the runtime locking validator. If you enable this your machine will run slowly.
- The build is broken on ia64 and probably on everything apart from x86, x86_64 and powerpc. Check out the hot-fixes directory, as it won't be broken for long.
- Dropped the git-viro-bid-* git trees - they're getting many rejects against other things in -mm.
- Merged the new readahead code.
- Merged the generic statistics infrastructure patches.
Changes since 2.6.17-rc4-mm3:
origin.patch
git-acpi.patch
git-agpgart.patch
git-alsa.patch
git-audit-master.patch
git-block.patch
git-cifs.patch
git-dvb.patch
git-gfs2.patch
git-ia64.patch
git-infiniband.patch
git-intelfb.patch
git-klibc.patch
git-hdrcleanup.patch
git-hdrinstall.patch
git-libata-all.patch
git-mips.patch
git-mtd.patch
git-mtd-fixup.patch
git-mtd-cs553x_nand-build-fix.patch
git-mtd-ya-build-fix.patch
git-netdev-all.patch
git-net.patch
git-nfs.patch
git-powerpc.patch
git-rbtree.patch
git-sas.patch
git-pcmcia.patch
git-scsi-rc-fixes.patch
git-scsi-target.patch
git-supertrak.patch
git-watchdog.patch
git-cryptodev.patch
git trees
-sys_sync_file_range-move-exported-flags-outside-kernel.patch -knfsd-fix-two-problems-that-can-cause-rmmod-nfsd-to-die.patch -md-fix-possible-oops-when-starting-a-raid0-array.patch -md-make-sure-bi_max_vecs-is-set-properly-in-bio_split.patch -git-audit-master-build-fix.patch
-audit-build-fix.patch
-git-klibc-build-hacks.patch -git-klibc-stdint-build-fix.patch -git-klibc-stdint-build-fix-2.patch -e1000-endian-fixes.patch -forcedeth-suggested-cleanups.patch -forcedeth-add-support-for-flow-control.patch -forcedeth-add-support-for-configuration.patch -drivers-net-s2ioc-make-bus_speed-static.patch -qla2xxx-lock-ordering-fix.patch -qla2xxx-lock-ordering-fix-warning-fix.patch -orinoco-possible-null-pointer-dereference-in-orinoco_rx_monitor.patch -x86_64-mm-i386-numa-summit-check-fix.patch -x86-64-calgary-iommu-introduce-iommu_detected.patch -x86-64-calgary-iommu-calgary-specific-bits.patch -x86-64-calgary-iommu-hook-it-in.patch -x86-64-check-for-valid-dma-data-direction-in-the-dma-api.patch -fix-unlikely-memory-leak-in-dac960-driver.patch -sunsu-license-fix.patch -intelfb-use-firmware-edid-for-mode-database.patch -intelfb-use-firmware-edid-for-mode-database-fix.patch
Merged into mainline or a subsystem tree
+ext3-resize-fix-double-unlock_super.patch +fbcon-fix-scrollback-with-logo-issue-immediately-after-boot.patch +spanned_pages-is-not-updated-at-a-case-of-memory-hot-add.patch +tpm-bios-log-parsing-fixes.patch +tpm-more-bios-log-parsing-fixes.patch +tpm-more-bios-log-parsing-fixes-tidy.patch +ipmi-reserve-i-o-ports-separately.patch +revert-swsusp-add-check-for-suspension-of-x-controlled-devices.patch +hrtimer-export-symbols.patch +drivers-usb-core-devioc-dereference-userspace-pointer.patch +scsi-properly-count-the-number-of-pages-in-scsi_req_map_sg.patch +x86_64-fix-stack-mmap-randomization-for-compat.patch +x86_64-fix-no-iommu-warning-in-pci-gart-driver.patch +i386-apic=-command-line-option-should-always-be.patch +x86_64-fix-last_tsc-calculation-of-pm-timer.patch +x86_64-handle-empty-node-zero.patch +x86_64-fix-off-by-one-in-bad_addr-checking-in.patch +x86_64-dont-do-syscall-exit-tracing-twice.patch +powerpc-fix-boot-on-emac.patch +au1100fb-fix-compilation.patch +maxinefb-fix-compilation-error.patch +sgiioc4-use-mmio-ops-instead-of-port-io.patch +md-fix-badness-in-sysfs_notify-caused-by-md_new_event.patch
2.6.17 queue
+acpi-atlas-acpi-driver.patch +acpi-atlas-acpi-driver-v2-tidy.patch +remove-acpi_os_create_lock-acpi_os_delete_lock.patch
ACPI updates
+firmware_class-s-semaphores-mutexes.patch
mutex conversion.
+trivial-videodev2h-patch.patch
cleanup
+fix-broken-suspend-resume-in-ohci1394-was-acpi-suspend.patch +ieee1394_core-switch-to-kthread-api.patch +ieee1394_core-switch-to-kthread-api-fix.patch
ieee1394 updates
-input-move-fixp-arithh-to-drivers-input.patch -input-fix-accuracy-of-fixp-arithh.patch -input-new-force-feedback-interface.patch -input-adapt-hid-force-feedback-drivers-for-the-new-interface.patch -input-adapt-uinput-for-the-new-force-feedback-interface.patch -input-adapt-iforce-driver-for-the-new-force-feedback-interface.patch -input-force-feedback-driver-for-pid-devices.patch -input-force-feedback-driver-for-zeroplus-devices.patch -input-update-documentation-of-force-feedback.patch -input-drop-the-remains-of-the-old-ff-interface.patch -input-drop-the-old-pid-driver.patch
Dropped - these are being redone.
+input-powermac-cleanup-of-mac_hid-and-support-for-ctrlclick-and-commandclick-update.patch
Fix input-powermac-cleanup-of-mac_hid-and-support-for-ctrlclick-and-commandclick.patch
+mm-constify-drivers-char-keyboardc.patch
+input-logitech-trackman-trackball-support.patch
Input driver updates
+git-mtd-cs553x_nand-build-fix.patch
+git-mtd-ya-build-fix.patch
Fix git-mtd.patch
+git-netdev-all-fixup.patch
Fix reject due to git-netdev-all.patch
+git-net-git-klibc-fixup.patch
Fix reject.
+eliminate-unused-proc-sys-net-ethernet.patch
Kill empty /proc directory.
+irda-missing-allocation-result-check-in-irlap_change_speed.patch
IRDA fix
+nfs-really-return-status-from-decode_recall_args.patch
NFS fixlet.
+64-bit-resources-arch-powerpc-changes-update.patch
ppc build fix
+allow-msi-to-work-on-kexec-kernel.patch
+pci-disable-msi-mode-in-pci_disable_device.patch
PCI fixes
+pcmcia-missing-pcmcia_get_socket-result-check.patch
pcmcia fixlet.
+qla1280-fix-section-mismatch-warnings.patch +bogus-disk-geometry-on-large-disks.patch +bogus-disk-geometry-on-large-disks-warning-fix.patch +megaraid_sas-switch-fw_outstanding-to-an-atomic_t.patch +megaraid_sas-add-support-for-zcr-controller.patch +megaraid_sas-add-support-for-zcr-controller-fix.patch
SCSI driver updates
+usb-gadget-update-inodec-to-support-full-speed-only.patch +usb-gadget-update-pxa2xx_udcc-and-arch-dependent-files.patch +usb-gadget-update-pxa2xx_udcc-driver-to-fully-support.patch +usb-gadget-clean-udch.patch +usb-gadget-dont-build-small-version-if-usbgadgetfs.patch +driver-for-apple-cinema-display.patch +driver-for-apple-cinema-display-tweaks.patch +usb-wifi-zd1201-cleanups.patch
USB updates
-x86_64-mm-iommu-warning.patch -x86_64-mm-i386-apic-overwrite.patch -x86_64-mm-profile-pc-fp.patch -x86_64-mm-fix-last_tsc-calculation-of-pm-timer.patch -x86_64-mm-empty-node0.patch -x86_64-mm-disable-apic-initdata.patch +x86_64-mm-iommu-clarification.patch +x86_64-mm-reliable-stack-trace-support.patch +x86_64-mm-reliable-stack-trace-support-x86-64.patch +x86_64-mm-reliable-stack-trace-support-x86-64-irq-stack.patch +x86_64-mm-reliable-stack-trace-support-x86-64-syscall.patch +x86_64-mm-reliable-stack-trace-support-i386.patch +x86_64-mm-reliable-stack-trace-support-i386-entrys.patch +x86_64-mm-consoldidate-boot-compressed.patch +x86_64-mm-remove-pud_offset_k.patch +x86_64-mm-use-halt-instead-of-raw-inline-assembly.patch +x86_64-mm-change-assembly-to-use-regular-cpuid_count-macro.patch +x86_64-mm-iommu-detected.patch +x86_64-mm-valid-dma-direction.patch +x86_64-mm-iommu-abstraction.patch +x86_64-mm-calgary-iommu.patch +x86_64-mm-moving-phys_proc_id-and-cpu_core_id-to-cpuinfo_x86.patch +x86_64-mm-add-nmi-watchdog-support-for-new-intel-cpus.patch +x86_64-mm-rdtscp-macros.patch +x86_64-mm-time-constants.patch +x86_64-mm-rename-force-hpet.patch +x86_64-mm-rdtscp-feature.patch +x86_64-mm-remove-hpet-hack.patch +x86_64-mm-use-time-constants.patch +x86_64-mm-init-rdtscp.patch +x86_64-mm-explain-double-hpet-init.patch +x86_64-mm-update-copyright.patch +x86_64-mm-getcpu-vsyscall.patch +x86_64-mm-time-init-gtod-prototype.patch +x86_64-mm-x86-clean-up-nmi-panic-messages.patch
x86_64 tree updates
-revert-x86_64-mm-profile-pc-fp.patch
Dropped.
+fix-x86_64-mm-reliable-stack-trace-support-i386-entrys.patch +x86_64-mm-reliable-stack-trace-support-non-x86-fix.patch +x86_64-mm-reliable-stack-trace-support-non-x86-fix-fix.patch +x86_64-mm-moving-phys_proc_id-and-cpu_core_id-to-cpuinfo_x86-warning-fix.patch
Fix x86_64 tree.
+lock-validator-lockdep-small-xfs-init_rwsem-cleanup.patch
XFS cleanup.
-zone-init-check-and-report-unaligned-zone-boundaries-fix-v2.patch
Folded into zone-init-check-and-report-unaligned-zone-boundaries.patch
-zone-allow-unaligned-zone-boundaries-spelling-fix.patch
Folded into zone-allow-unaligned-zone-boundaries.patch
+zone-allow-unaligned-zone-boundaries-x86-add-zone-alignment-qualifier.patch
Implement it on x86.
-unify-pxm_to_node-and-node_to_pxm-update.patch
Folded into unify-pxm_to_node-and-node_to_pxm.patch
-pgdat-allocation-for-new-node-add-specify-node-id-powerpc-fix.patch -pgdat-allocation-for-new-node-add-specify-node-id-tidy.patch -pgdat-allocation-for-new-node-add-specify-node-id-fix-3.patch -pgdat-allocation-for-new-node-add-specify-node-id-build-fixes.patch -pgdat-allocation-for-new-node-add-specify-node-id-tidy-cleanup.patch
Folded into pgdat-allocation-for-new-node-add-specify-node-id.patch
-pgdat-allocation-for-new-node-add-get-node-id-by-acpi-tidy.patch
Folded into pgdat-allocation-for-new-node-add-get-node-id-by-acpi.patch
-pgdat-allocation-for-new-node-add-generic-alloc-node_data-tidy.patch
Folded into pgdat-allocation-for-new-node-add-generic-alloc-node_data.patch
-pgdat-allocation-for-new-node-add-refresh-node_data-fix.patch
Folded into pgdat-allocation-for-new-node-add-refresh-node_data.patch
-pgdat-allocation-for-new-node-add-export-kswapd-start-func-tidy.patch
Folded into pgdat-allocation-for-new-node-add-export-kswapd-start-func.patch
-catch-valid-mem-range-at-onlining-memory-tidy.patch -catch-valid-mem-range-at-onlining-memory-fix.patch
Folded into catch-valid-mem-range-at-onlining-memory.patch
-register-sysfs-file-for-hotpluged-new-node-fix.patch
Folded into register-sysfs-file-for-hotpluged-new-node.patch
-mm-introduce-remap_vmalloc_range-tidy.patch
-mm-introduce-remap_vmalloc_range-fix.patch
Folded into mm-introduce-remap_vmalloc_range.patch
-change-gen_pool-allocator-to-not-touch-managed-memory-update.patch -change-gen_pool-allocator-to-not-touch-managed-memory-update-2.patch
Folded into change-gen_pool-allocator-to-not-touch-managed-memory.patch
-page-migration-cleanup-extract-try_to_unmap-from-migration-functions-update-comments-7.patch
Folded into page-migration-cleanup-extract-try_to_unmap-from-migration-functions.patch
-page-migration-cleanup-move-fallback-handling-into-special-function-update-comments-9.patch
Folded into page-migration-cleanup-move-fallback-handling-into-special-function.patch
-swapless-pm-add-r-w-migration-entries-fix.patch -swapless-pm-add-r-w-migration-entries-ifdefs.patch -swapless-pm-add-r-w-migration-entries-update-comments.patch -swapless-pm-add-r-w-migration-entries-update-comments-4.patch -swapless-pm-add-r-w-migration-entries-update-comments-6.patch
Folded into swapless-pm-add-r-w-migration-entries.patch
+swapless-pm-add-r-w-migration-entries-fix-2.patch
Fix it again.
-swapless-page-migration-modify-core-logic-remove-useless-mapping-checks.patch
Folded into swapless-page-migration-modify-core-logic.patch
-more-page-migration-use-migration-entries-for-file-pages-fix.patch -more-page-migration-use-migration-entries-for-file-pages-update-comments-5.patch -more-page-migration-use-migration-entries-for-file-pages-update-comments-8.patch -more-page-migration-use-migration-entries-for-file-pages-remove_migration_ptes.patch -more-page-migration-use-migration-entries-for-file-pages-replace-call-to-pageout-with-writepage-2.patch
Folded into more-page-migration-use-migration-entries-for-file-pages.patch
-tracking-dirty-pages-in-shared-mappings-v4.patch -tracking-dirty-pages-in-shared-mappings-v4-fix2.patch -tracking-dirty-pages-in-shared-mappings-v4-fix3.patch -throttle-writers-of-shared-mappings.patch -throttle-writers-of-shared-mappings-tidy.patch -optimize-follow_pages.patch
Dropped, being redone.
+node-hotplug-register-cpu-remove-node-struct.patch +node-hotplug-fixes-callres-of-register_cpu.patch +node-hotplug-fixes-callres-of-register_cpu-powerpc-warning-fix.patch +node-hotplug-register_node-fix.patch
NUMA node hotplugging updates
+add-page_mkwrite-vm_operations-method.patch +mm-remove-vm_locked-before-remap_pfn_range-and-drop-vm_shm.patch +swapoff-atomic_inc_not_zero-on-mm_users.patch +remove-unused-o_flags-from-do_shmat.patch +fix-update_mmu_cache-in-fremapc.patch +fix-update_mmu_cache-in-fremapc-fix.patch
Memory management updates
+page-migration-support-moving-of-individual-pages-fixes.patch +page-migration-support-moving-of-individual-pages-x86_64-support.patch +page-migration-support-moving-of-individual-pages-x86-support.patch +page-migration-support-moving-of-individual-pages-x86-support-fix.patch +allow-migration-of-mlocked-pages.patch
Page migration updates
+au1550-1200-add-missing-psc-defines-make-oss-driver-use.patch
MIPS fix
+x86-re-enable-generic-numa.patch +x86-make-using_apic_timer-__read_mostly.patch +x86-cyrix-code-config_pci-fix--add-__initdata.patch +x86-constify-some-parts-of-arch-i386-kernel-cpu.patch +x86-make-i387-mxcsr_feature_mask-__read_mostly.patch +x86-make-acpi-errata-__read_mostly.patch +x86-constify-arch-i386-pci-irqc.patch +x86-use-proper-defines-for-i8259a-i-o.patch +i386-moving-phys_proc_id-and-cpu_core_id-to-cpuinfo_x86.patch +i386-moving-phys_proc_id-and-cpu_core_id-to-cpuinfo_x86-warning-fix.patch +i386-fix-get_segment_eip-with-vm86.patch
x86 updates
-x86-move-vsyscall-page-out-of-fixmap-above-stack.patch -x86-move-vsyscall-page-out-of-fixmap-above-stack-tidy.patch +vdso-randomize-the-i386-vdso-by-moving-it-into-a-vma.patch +vdso-randomize-the-i386-vdso-by-moving-it-into-a-vma-tidy.patch +vdso-randomize-the-i386-vdso-by-moving-it-into-a-vma-arch_vma_name-fix.patch +vdso-randomize-the-i386-vdso-by-moving-it-into-a-vma-vs-x86_64-mm-reliable-stack-trace-support-i386.patch +vdso-randomize-the-i386-vdso-by-moving-it-into-a-vma-vs-x86_64-mm-reliable-stack-trace-support-i386-2.patch
Updated x86 VDSO randomisation patches
-swsusp-add-architecture-special-saveable-pages-fix.patch
Folded into swsusp-add-architecture-special-saveable-pages-support.patch
-swsusp-i386-mark-special-saveable-unsaveable-pages-fix.patch
Folded into swsusp-i386-mark-special-saveable-unsaveable-pages.patch
-swsusp-x86_64-mark-special-saveable-unsaveable-pages-fix.patch
Folded into swsusp-x86_64-mark-special-saveable-unsaveable-pages.patch
-dont-use-flush_tlb_all-in-suspend-time-tidy.patch
Folded into dont-use-flush_tlb_all-in-suspend-time.patch
-swsusp-fix-typo-in-cr0-handling.patch
Folded into swsusp-documentation-updates.patch
+m68k-completely-initialize-hw_regs_t-in-ide_setup_ports.patch +m68k-atyfb_base-compile-fix-for-config_pci=n.patch +m68k-cleanup-unistdh.patch +m68k-remove-some-unused-definitions-in-zorroh.patch +m68k-use-c99-initializer.patch +m68k-print-correct-stack-trace.patch +m68k-restore-amikbd-compatibility-with-24.patch +m68k-extra-delay.patch +m68k-use-proper-defines-for-zone-initialization.patch +m68k-adjust-to-changed-hardirq_mask.patch +m68k-m68k-mac-via2-fixes-and-cleanups.patch
m68k updates
+xtensa-remove-verify_area-macros.patch
+xtensa-remove-verify_area-macros-fix.patch
Xtensa updates
-s390-statistics-infrastructure.patch
Dropped.
-per-cpufy-net-proto-structures-add-percpu_counter_modbh.patch -percpu-counters-add-percpu_counter_exceeds.patch -per-cpufy-net-proto-structures-protomemory_allocated.patch -per-cpufy-net-proto-structures-sockets_allocated.patch -per-cpufy-net-proto-structures-protoinuse.patch
Dropped.
-percpu-counter-data-type-changes-to-suppport-fix.patch -percpu-counter-data-type-changes-to-suppport-fix-fix.patch -percpu-counter-data-type-changes-to-suppport-fix-fix-fix.patch
Folded into percpu-counter-data-type-changes-to-suppport.patch
-jbd-split-checkpoint-lists-tidy.patch
Folded into jbd-split-checkpoint-lists.patch
-mark-address_space_operations-const-fix.patch
-mark-address_space_operations-const-fix-2.patch
Folded into mark-address_space_operations-const.patch
-hptiop-highpoint-rocketraid-3xxx-controller-driver-list-locking.patch -hptiop-highpoint-rocketraid-3xxx-controller-driver-list-locking-updates.patch -hptiop-highpoint-rocketraid-3xxx-controller-driver-list-locking-updates-updates-2.patch -hptiop-highpoint-rocketraid-3xxx-controller-driver-redone.patch
Folded into hptiop-highpoint-rocketraid-3xxx-controller-driver.patch
-ufs-right-block-allocation-fixes.patch
Folded into ufs-right-block-allocation.patch
-ufs-change-block-number-on-the-fly-tweaks.patch
Folded into ufs-change-block-number-on-the-fly.patch
+ufs-wrong-type-cast.patch +ufs-not-usual-amounts-of-fragments-per-block.patch +ufs-unmark-config_ufs_fs_write-as-broken-mm-tree.patch
More UFS fixes.
-add-driver-for-arm-amba-pl031-rtc-tidy.patch
Folded into add-driver-for-arm-amba-pl031-rtc.patch
-add-a-sysfs-file-to-determine-if-a-kexec-kernel-is-loaded-tidy.patch
Folded into add-a-sysfs-file-to-determine-if-a-kexec-kernel-is-loaded.patch
+avoid-disk-sector_t-overflow-for-2tb-ext3-filesystem.patch +cleanup-dead-code-from-ext2-mount-code.patch +fix-memory-leak-when-the-ext3s-journal-file-is-corrupted.patch +remove-inconsistent-space-before-exclamation-point-in-ext3s-mount-code.patch +moxa-remove-pointless-casts.patch +moxa-remove-pointless-check-of-tty-argument-vs-null.patch +moxa-partial-codingstyle-cleanup-spelling-fixes.patch +updated-kdump-documentation.patch +cpuset-remove-extra-cpuset_zone_allowed-check-in-__alloc_pages.patch +spin-rwlock-init-cleanups.patch +make-debug_mutex_on-__read_mostly.patch +constify-parts-of-kernel-power.patch +constify-libcrc32c-table.patch
+apple-motion-sensor-driver.patch +prepare-for-__copy_from_user_inatomic-to-not-zero-missed-bytes.patch +make-copy_from_user_inatomic-not-zero-the-tail-on-i386.patch +remove-unecessary-null-check-in-kernel-acctc.patch +ax88796-parallel-port-driver.patch +ax88796-parallel-port-driver-build-fix.patch +wd7000-fix-section-mismatch-warnings.patch +megaraid_mbox-fix-section-mismatch-warnings.patch +keys-fix-race-between-two-instantiators-of-a-key.patch +keys-fix-race-between-two-instantiators-of-a-key-tidy.patch +ext3_fsblk_t-filesystem-group-blocks-and-bug-fixes.patch +ext3_fsblk_t-the-rest-of-in-kernel-filesystem-blocks.patch +inotify-kernel-api.patch
+inotify-kernel-api-fix.patch
+kernel-doc-mm-readhead-fixup.patch +make-procfs-obligatory-except-under-config_embedded.patch +lock-validator-introduce-warn_on_oncecond.patch +make-sysctl-obligatory-except-under-config_embedded.patch +lock-validator-sound-oss-emu10k1-midic-cleanup.patch +for_each_cpu_mask-warning-fix.patch
Misc.
-use-list_add_tail-instead-of-list_add-fix.patch
Folded into use-list_add_tail-instead-of-list_add.patch
+add-new-generic-hw-rng-core-hw_random-core-rewrite-chrdev-read-method-hw_random-core-block-read-if-o_nonblock.patch
Hardware random number genarator update.
+time-fix-time-going-backward-w-clock=pit.patch
x86 time handling fix
pi-futex-futex-code-cleanups.patch
-pi-futex-futex-code-cleanups-fix.patch +pi-futex-robust-futex-docs-fix.patch
pi-futex-introduce-debug_check_no_locks_freed.patch
+pi-futex-introduce-warn_on_smp.patch
pi-futex-add-plist-implementation.patch pi-futex-scheduler-support-for-pi.patch pi-futex-rt-mutex-core.patch
-pi-futex-rt-mutex-core-fix-timeout-race.patch
pi-futex-rt-mutex-docs.patch
+pi-futex-rt-mutex-docs-update.patch
pi-futex-rt-mutex-debug.patch pi-futex-rt-mutex-tester.patch pi-futex-rt-mutex-futex-api.patch pi-futex-futex_lock_pi-futex_unlock_pi-support.patch
-pi-futex-v2.patch
-pi-futex-v3.patch
-pi-futex-patchset-v4.patch -pi-futex-patchset-v4-update.patch -pi-futex-patchset-v4-fix.patch -rtmutex-remove-buggy-bug_on-in-pi-boosting-code.patch -futex-pi-enforce-waiter-bit-when-owner-died-is-detected.patch -rtmutex-debug-printk-correct-task-information.patch -futex-pi-make-use-of-restart_block-when-interrupted.patch -document-futex-pi-design.patch -document-futex-pi-design-fix.patch -document-futex-pi-design-fix-fix.patch
Updated pi-futex patch series
+ecryptfs-fs-makefile-and-fs-kconfig-remove-ecrypt_debug-from-fs-kconfig.patch +ecryptfs-main-module-functions-uint16_t-u16.patch +ecryptfs-header-declarations-update.patch +ecryptfs-header-declarations-update-convert-signed-data-types-to-unsigned-data-types.patch +ecryptfs-header-declarations-remove-unnecessary-ifndefs.patch +ecryptfs-file-operations-remove-null-==-syntax.patch +ecryptfs-file-operations-remove-extraneous-read-of-inode-size-from-header.patch +ecryptfs-convert-assert-to-bug_on.patch +ecryptfs-remove-unnecessary-null-checks.patch +ecryptfs-rewrite-ecryptfs_fsync.patch
+ecryptfs-overhaul-file-locking.patch
ecryptfs updates
+proc-sysctl-add-_proc_do_string-helper.patch
/proc helper fucntion.
+namespaces-utsname-switch-to-using-uts-namespaces-cleanup.patch
Folded into namespaces-utsname-switch-to-using-uts-namespaces-alpha-fix.patch
+namespaces-utsname-sysctl-hack-cleanup.patch
+namespaces-utsname-sysctl-hack-cleanup-2.patch
Folded into namespaces-utsname-sysctl-hack.patch
+uts-copy-nsproxy-only-when-needed.patch
utsname virtualisation update
+readahead-kconfig-options.patch +radixtree-introduce-radix_tree_scan_hole.patch +mm-introduce-probe_page.patch +mm-introduce-pg_readahead.patch +readahead-add-look-ahead-support-to-__do_page_cache_readahead.patch +readahead-delay-page-release-in-do_generic_mapping_read.patch +readahead-insert-cond_resched-calls.patch +readahead-minmax_ra_pages.patch +readahead-events-accounting.patch +readahead-rescue_pages.patch +readahead-sysctl-parameters.patch +readahead-sysctl-parameters-fix.patch +readahead-min-max-sizes.patch +readahead-state-based-method-aging-accounting.patch +readahead-state-based-method-routines.patch +readahead-state-based-method.patch +readahead-context-based-method.patch +readahead-initial-method-guiding-sizes.patch +readahead-initial-method-thrashing-guard-size.patch +readahead-initial-method-expected-read-size.patch +readahead-initial-method-user-recommended-size.patch +readahead-initial-method.patch +readahead-backward-prefetching-method.patch +readahead-seeking-reads-method.patch +readahead-thrashing-recovery-method.patch +readahead-call-scheme.patch
+readahead-laptop-mode.patch
+readahead-loop-case.patch
+readahead-nfsd-case.patch +readahead-turn-on-by-default.patch +readahead-debug-radix-tree-new-functions.patch +readahead-debug-traces-showing-accessed-file-names.patch +readahead-debug-traces-showing-read-patterns.patch
readahead rework
+make-copy_from_user_inatomic-not-zero-the-tail-on-i386-vs-reiser4.patch -reiser4-fix-incorrect-assertions.patch -reiser4-add-missing-txn_restart-before-get_nonexclusive_access-calls.patch -reiser4-check-radix-tree-emptiness-properly.patch -reiser4-check-radix-tree-emptiness-properly-2.patch -fs-reiser4-misc-cleanups.patch
-reiser4-releasepage-fix.patch
-reiser4fs-use-list_move.patch -make-address_space_operations-invalidatepage-return-void-reiser4.patch -reiser4-have-get_exclusive_access-restart-transaction.patch -reiser4-writeback-fix-range-handling.patch -reiser4-gfp_t-annotations.patch +reiser4-run-truncate_inode_pages-in-reiser4_delete_inode.patch
Reiser4 updates
+hpt3xx-switch-to-using-pci_get_slot.patch
+hpt3xx-cache-channels-mcr-address.patch
IDE updates
+fbdev-remove-unused-exports.patch
+s3c2410fb-fix-resume.patch
+backlight-fix-kconfig-dependency.patch
+au1100fb-add-power-management-support.patch
+au1100fb-add-power-management-support-tidy.patch
fbdev updates
+dm-snapshot-unify-chunk_size.patch
+lib-add-idr_replace.patch
+lib-add-idr_replace-tidy.patch
+dm-fix-idr-minor-allocation.patch
+dm-move-idr_pre_get.patch
+dm-change-minor_lock-to-spinlock.patch
+dm-add-dmf_freeing.patch
+dm-fix-mapped-device-ref-counting.patch
+dm-add-module-ref-counting.patch
+dm-fix-block-device-initialisation.patch
+dm-mirror-sector-offset-fix.patch
Device mapper updates
+statistics-infrastructure-prerequisite-list.patch +statistics-infrastructure-prerequisite-parser.patch +statistics-infrastructure-prerequisite-timestamp.patch +statistics-infrastructure-documentation.patch +statistics-infrastructure.patch +statistics-infrastructure-update-1.patch +statistics-infrastructure-exploitation-zfcp.patch
Generic statistics infrastructure, use it on an s390 driver.
+genirq-rename-desc-handler-to-desc-chip-ia64-fix-2.patch
Fix genirq-rename-desc-handler-to-desc-chip.patch some more.
+genirq-sem2mutex-probe_sem-probing_active.patch +genirq-cleanup-merge-irq_affinity-into-irq_desc.patch +genirq-cleanup-remove-irq_descp.patch +genirq-cleanup-remove-fastcall.patch +genirq-cleanup-misc-code-cleanups.patch +genirq-cleanup-reduce-irq_desc_t-use-mark-it-obsolete.patch +genirq-cleanup-include-linux-irqh.patch +genirq-cleanup-merge-irq_dir-smp_affinity_entry-into-irq_desc.patch +genirq-cleanup-merge-pending_irq_cpumask-into-irq_desc.patch +genirq-cleanup-turn-arch_has_irq_per_cpu-into-config_irq_per_cpu.patch +genirq-debug-better-debug-printout-in-enable_irq.patch +genirq-add-retrigger-irq-op-to-consolidate-hw_irq_resend.patch +genirq-doc-comment-include-linux-irqh-structures.patch +genirq-doc-handle_irq_event-and-__do_irq-comments.patch +genirq-cleanup-no_irq_type-cleanups.patch +genirq-doc-add-design-documentation.patch +genirq-add-genirq-sw-irq-retrigger.patch +genirq-add-irq_noprobe-support.patch +genirq-add-irq_norequest-support.patch +genirq-add-irq_noautoen-support.patch +genirq-update-copyrights.patch
+genirq-core.patch
+genirq-add-irq-chip-support.patch +genirq-add-handle_bad_irq.patch +genirq-add-irq-wake-power-management-support.patch +genirq-add-sa_trigger-support.patch +genirq-cleanup-no_irq_type-no_irq_chip-rename.patch +genirq-convert-the-x86_64-architecture-to-irq-chips.patch +genirq-convert-the-i386-architecture-to-irq-chips.patch +genirq-convert-the-i386-architecture-to-irq-chips-fix-2.patch +genirq-more-verbose-debugging-on-unexpected-irq-vectors.patch
Generic IRQ habdling layer
+lock-validator-floppyc-irq-release-fix.patch +lock-validator-forcedethc-fix.patch +lock-validator-mutex-section-binutils-workaround.patch +lock-validator-add-__module_address-method.patch +lock-validator-better-lock-debugging.patch +lock-validator-locking-api-self-tests.patch +lock-validator-locking-init-debugging-improvement.patch +lock-validator-beautify-x86_64-stacktraces.patch +lock-validator-beautify-x86_64-stacktraces-fix.patch +lock-validator-x86_64-document-stack-frame-internals.patch +lock-validator-stacktrace.patch +lock-validator-stacktrace-build-fix.patch +lock-validator-stacktrace-warning-fix.patch +lock-validator-fown-locking-workaround.patch +lock-validator-sk_callback_lock-workaround.patch +lock-validator-irqtrace-core.patch +lock-validator-irqtrace-core-powerpc-fix-1.patch +lock-validator-irqtrace-core-non-x86-fix.patch +lock-validator-irqtrace-core-non-x86-fix-2.patch +lock-validator-irqtrace-core-non-x86-fix-3.patch +lock-validator-irqtrace-cleanup-include-asm-i386-irqflagsh.patch +lock-validator-irqtrace-cleanup-include-asm-x86_64-irqflagsh.patch +lock-validator-lockdep-add-local_irq_enable_in_hardirq-api.patch +lock-validator-add-per_cpu_offset.patch +lock-validator-add-per_cpu_offset-fix.patch +lock-validator-core.patch
+lock-validator-procfs.patch +lock-validator-core-multichar-fix.patch +lock-validator-core-count_matching_names-fix.patch +lock-validator-design-docs.patch +lock-validator-prove-rwsem-locking-correctness.patch +lock-validator-prove-rwsem-locking-correctness-fix.patch +lock-validator-prove-rwsem-locking-correctness-powerpc-fix.patch +lock-validator-prove-spinlock-rwlock-locking-correctness.patch +lock-validator-prove-mutex-locking-correctness.patch +lock-validator-print-all-lock-types-on-sysrq-d.patch +lock-validator-x86_64-early-init.patch +lock-validator-smp-alternatives-workaround.patch +lock-validator-do-not-recurse-in-printk.patch +lock-validator-disable-nmi-watchdog-if-config_lockdep.patch +lock-validator-special-locking-bdev.patch +lock-validator-special-locking-direct-io.patch +lock-validator-special-locking-serial.patch +lock-validator-special-locking-serial-fix.patch +lock-validator-special-locking-dcache.patch +lock-validator-special-locking-i_mutex.patch +lock-validator-special-locking-s_lock.patch +lock-validator-special-locking-futex.patch +lock-validator-special-locking-genirq.patch +lock-validator-special-locking-completions.patch +lock-validator-special-locking-waitqueues.patch +lock-validator-special-locking-mm.patch +lock-validator-special-locking-slab.patch +lock-validator-special-locking-skb_queue_head_init.patch +lock-validator-special-locking-timerc.patch +lock-validator-special-locking-schedc.patch +lock-validator-special-locking-hrtimerc.patch +lock-validator-special-locking-sock_lock_init.patch +lock-validator-special-locking-af_unix.patch +lock-validator-special-locking-bh_lock_sock.patch +lock-validator-special-locking-mmap_sem.patch +lock-validator-special-locking-sb-s_umount.patch +lock-validator-special-locking-sb-s_umount-fix.patch +lock-validator-special-locking-sb-s_umount-2.patch +lock-validator-special-locking-jbd.patch +lock-validator-special-locking-posix-timers.patch +lock-validator-special-locking-sch_genericc.patch +lock-validator-special-locking-xfrm.patch +lock-validator-special-locking-sound-core-seq-seq_portsc.patch +lock-validator-enable-lock-validator-in-kconfig.patch +lock-validator-enable-lock-validator-in-kconfig-x86-only.patch +lock-validator-enable-lock-validator-in-kconfig-not-yet.patch +lockdep-one-stacktrace-column-if-config_lockdep=y.patch +lockdep-further-improve-stacktrace-output.patch +lock-validator-special-locking-kgdb.patch
Runtime locking validation.
-add-print_fatal_signals-support.patch +vdso-print-fatal-signals.patch +vdso-improve-print_fatal_signals-support-by-adding-memory-maps.patch
Updated
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/patch-list
Quoted 2 lines · Andrew Morton
- Merged the runtime locking validator. If you enable this your machine will run slowly.
if you disable CONFIG_DEBUG_LOCKDEP it should be quite OK. (If debugging is disabled then the lockless "chain cache" is fully utilized and we should rarely go into the more complex portions of kernel/lockdep.c.)
Ingo
PATCH 1/1 genirq: ia64 build fix
In reply to Andrew MortonSubject: genirq: ia64 build fix
From: Ingo Molnar <[email protected]>
fix missed handler -> chip rename.
--- arch/ia64/hp/sim/hpsim_irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/ia64/hp/sim/hpsim_irq.c +2 -2
@@ -45,7 +45,7 @@ hpsim_irq_init (void)for (i =0 ; i <NR_IRQS ; ++i) { idesc = irq_desc + i; -if (idesc->handler == &no_irq_type) - idesc->handler = &irq_type_hp_sim; +if (idesc->chip == &no_irq_type) + idesc->chip = &irq_type_hp_sim; } }
PATCH 1/1 lock validator, irqtrace: support non-x86 architectures
In reply to Andrew MortonSubject: lock validator, irqtrace: support non-x86 architectures
From: Ingo Molnar <[email protected]>
add TRACE_IRQFLAGS_SUPPORT method for architectures to signal whether they have irq-flags tracing infrastructure.
--- arch/i386/Kconfig.debug | 4 ++++ arch/x86_64/Kconfig.debug | 4 ++++ include/linux/trace_irqflags.h | 30 +++++++++++++++--------------- lib/Kconfig.debug | 3 +++ 4 files changed, 26 insertions(+), 15 deletions(-)
arch/i386/Kconfig.debug +4 -0
@@ -1,5 +1,9 @@ menu "Kernel hacking" +config TRACE_IRQFLAGS_SUPPORT + bool + default y + source "lib/Kconfig.debug" config EARLY_PRINTK
arch/x86_64/Kconfig.debug +4 -0
@@ -1,5 +1,9 @@ menu "Kernel hacking" +config TRACE_IRQFLAGS_SUPPORT + bool + default y + source "lib/Kconfig.debug" config DEBUG_RODATA
include/linux/trace_irqflags.h +15 -15
@@ -11,12 +11,6 @@#ifndef _LINUX_TRACE_IRQFLAGS_H#define _LINUX_TRACE_IRQFLAGS_H -#include <asm/irqflags.h> - -/* -* The local_irq_*() APIs are equal to the raw_local_irq*() -* if !TRACE_IRQFLAGS. -*/ #ifdef CONFIG_TRACE_IRQFLAGS extern void trace_hardirqs_on (void );extern void trace_hardirqs_off (void );
@@ -31,7 +25,6 @@# define trace_softirq_enter () do { current->softirq_context++; } while (0)# define trace_softirq_exit () do { current->softirq_context--; } while (0)# define INIT_TRACE_IRQFLAGS .softirqs_enabled = 1, -#else # define trace_hardirqs_on () do { } while (0)# define trace_hardirqs_off () do { } while (0)
@@ -48,7 +41,10 @@# define INIT_TRACE_IRQFLAGS #endif -#ifdef CONFIG_X86 +#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT + +#include <asm/irqflags.h> +#define local_irq_enable () \ do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)#define local_irq_disable () \
@@ -66,12 +62,16 @@ raw_local_irq_restore(flags); \ } \ } while (0) -#else -#define raw_local_irq_disable () local_irq_disable() -#define raw_local_irq_enable () local_irq_enable() -#define raw_local_irq_save (flags) local_irq_save(flags) -#define raw_local_irq_restore (flags) local_irq_restore(flags) -#endif /* CONFIG_X86 */ +#else /* !CONFIG_TRACE_IRQFLAGS_SUPPORT */ +/* +* The local_irq_*() APIs are equal to the raw_local_irq*() +* if !TRACE_IRQFLAGS. +*/ +# define raw_local_irq_disable () local_irq_disable() +# define raw_local_irq_enable () local_irq_enable() +# define raw_local_irq_save (flags) local_irq_save(flags) +# define raw_local_irq_restore (flags) local_irq_restore(flags) +#endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */ /* * On lockdep we dont want to enable hardirqs in hardirq
@@ -86,7 +86,7 @@# define local_irq_enable_in_hardirq () local_irq_enable()#endif -#ifdef CONFIG_X86 +#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT #define safe_halt () \ do { \ trace_hardirqs_on(); \
lib/Kconfig.debug +3 -0
@@ -123,6 +123,7 @@ config DEBUG_PREEMPT bool "Debug preemptible kernel" depends on DEBUG_KERNEL && PREEMPT default y + depends on TRACE_IRQFLAGS_SUPPORT help If you say Y here then the kernel will use a debug variant of the commonly used smp_processor_id() function and will print warnings
@@ -347,6 +348,7 @@ config DEBUG_LOCKDEP bool "Lock dependency engine debugging" depends on LOCKDEP default y + depends on TRACE_IRQFLAGS_SUPPORT help If you say Y here, the lock dependency engine will do additional runtime checks to debug itself, at the price
@@ -355,6 +357,7 @@ config DEBUG_LOCKDEP config TRACE_IRQFLAGS bool default y + depends on TRACE_IRQFLAGS_SUPPORT depends on PROVE_SPIN_LOCKING || PROVE_RW_LOCKING config DEBUG_SPINLOCK_SLEEP
PATCH 1/1 lock validator: rwsem build fix for non-x86 architectures
In reply to Andrew MortonSubject: lock validator: rwsem build fix for non-x86 architectures
From: Ingo Molnar <[email protected]>
rwsem build fix for non-x86 architectures which use their own asm/rwsem.h and have no __init_rwsem method yet.
--- include/linux/rwsem.h | 4 ++++ 1 file changed, 4 insertions(+)
include/linux/rwsem.h +4 -0
@@ -30,8 +30,12 @@ struct rw_semaphore;* Lockdep: type splitting can also be done for dynamic locks, if for * example there are per-CPU dynamically allocated locks: */ +#ifdef CONFIG_PROVE_RWSEM_LOCKING #define init_rwsem_key (sem, key) \ __init_rwsem((sem), #sem, key) +#else +# define init_rwsem_key (sem, key) init_rwsem(sem) +#endif #ifndef rwsemtrace#if RWSEM_DEBUG
Quoted 3 lines · Andrew Morton
- The build is broken on ia64 and probably on everything apart from x86,
x86_64and powerpc. Check out the hot-fixes directory, as it won't be broken for long.
with the following patches i just sent:
patches/genirq-ia64-build-fix.patch
patches/irqtrace-support-nonx86.patch
patches/lockdep-rwsem-fix.patch
ia64 defconfig builds fine now. I'd expect other non-x86 architectures to build fine too (with the lock validator disabled).
Ingo
BUG: possible deadlock detected! (sound) [Was: 2.6.17-rc5-mm1]
In reply to Andrew Morton-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Andrew Morton napsal(a):
Quoted 1 line
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
====================================
[ BUG: possible deadlock detected! ]
- ------------------------------------
idle/1 is trying to acquire lock:
(&ops->reg_mutex){--..}, at: [<c03ca763>] mutex_lock+0x8/0xa
but task is already holding lock:
(&ops->reg_mutex){--..}, at: [<c03ca763>] mutex_lock+0x8/0xa
which could potentially lead to deadlocks!
other info that might help us debug this:
1 locks held by idle/1:
#0: (&ops->reg_mutex){--..}, at: [<c03ca763>] mutex_lock+0x8/0xa
stack backtrace: [<c01042ac>] show_trace+0x1b/0x1d [<c01049f2>] dump_stack+0x26/0x28 [<c01422fa>] __lockdep_acquire+0xa58/0xd8e [<c0142b97>] lockdep_acquire+0x73/0x88 [<c03ca378>] __mutex_lock_slowpath+0xb3/0x496 [<c03ca763>] mutex_lock+0x8/0xa [<c0333aa0>] snd_seq_device_new+0x96/0x111 [<c0358260>] snd_emux_init_seq_oss+0x35/0x9c [<c0353f50>] snd_emux_register+0x10d/0x13f [<c0352c39>] snd_emu10k1_synth_new_device+0xe7/0x14e [<c0333537>] init_device+0x2c/0x94 [<c0333d04>] snd_seq_device_register_driver+0x8f/0xeb [<c05911e0>] alsa_emu10k1_synth_init+0x22/0x24 [<c01003cb>] init+0x12b/0x2f5 [<c0101005>] kernel_thread_helper+0x5/0xb
If more info needed, feel free to ask.
regards,
- --
Jiri Slaby www.fi.muni.cz/~xslaby
\_.-^-._ [email protected] _.-^-._/
B67499670407CE62ACC8 22A032CC55C339D47A7E -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFEfCLOMsxVwznUen4RArelAJ0WtN36nSYJ3VWB515Wik2ji8YXAACfe5jD jiPvjBzv4udC7XJPxTUtmOM=
=vLLJ
-----END PGP SIGNATURE-----
Re: BUG: possible deadlock detected! (sound) [Was: 2.6.17-rc5-mm1]
On Tue, 2006-05-30 at 147 +0159, Jiri Slaby wrote:
(I've turned your backtrace upside down to show it "chronological")
[<c05911e0>] alsa_emu10k1_synth_init+0x22/0x24 [<c0333d04>] snd_seq_device_register_driver+0x8f/0xeb
this one does:
mutex_lock(&ops->reg_mutex);
...
list_for_each(head, &ops->dev_list) {
struct snd_seq_device *dev = list_entry(head, struct snd_seq_device, list);
init_device(dev, ops);
}
mutex_unlock(&ops->reg_mutex);[<c0333537>] init_device+0x2c/0x94 which calls into the driver [<c0352c39>] snd_emu10k1_synth_new_device+0xe7/0x14e [<c0353f50>] snd_emux_register+0x10d/0x13f [<c0358260>] snd_emux_init_seq_oss+0x35/0x9c [<c0333aa0>] snd_seq_device_new+0x96/0x111
and this one does
mutex_lock(&ops->reg_mutex);
list_add_tail(&dev->list, &ops->dev_list);
ops->num_devices++;
mutex_unlock(&ops->reg_mutex);so... on first sight this looks like a real deadlock; unless the ALSA folks can tell me why "ops" is always different, and what the lock ordering rules between those is...
Re: BUG: possible deadlock detected! (sound) [Was: 2.6.17-rc5-mm1]
At Tue, 30 May 2006 13:06:28 +0200,
Quoted 32 lines · Arjan van de Ven
On Tue, 2006-05-30 at 147 +0159, Jiri Slaby wrote:
(I've turned your backtrace upside down to show it "chronological")
[<c05911e0>] alsa_emu10k1_synth_init+0x22/0x24 [<c0333d04>] snd_seq_device_register_driver+0x8f/0xebthis one does:
mutex_lock(&ops->reg_mutex); ... list_for_each(head, &ops->dev_list) { struct snd_seq_device *dev = list_entry(head, struct snd_seq_device, list); init_device(dev, ops); } mutex_unlock(&ops->reg_mutex);[<c0333537>] init_device+0x2c/0x94 which calls into the driver [<c0352c39>] snd_emu10k1_synth_new_device+0xe7/0x14e [<c0353f50>] snd_emux_register+0x10d/0x13f [<c0358260>] snd_emux_init_seq_oss+0x35/0x9c [<c0333aa0>] snd_seq_device_new+0x96/0x111and this one does
mutex_lock(&ops->reg_mutex); list_add_tail(&dev->list, &ops->dev_list); ops->num_devices++; mutex_unlock(&ops->reg_mutex);
Quoted 3 lines
so... on first sight this looks like a real deadlock; unless the ALSA folks can tell me why "ops" is always different, and what the lock ordering rules between those is...
This ops is a unique object assigned to a different "id" string.
The first snd_seq_device_register_driver() called from emu10k1_synth.c is the registration for the id "snd-synth-emu10k1".
Then in init_device(), the corresponding devices are initialized, and one callback registers again another device for OSS sequencer with a different id "snd-seq-oss" via snd_seq_device_new() inside the lock. Now it hits the lock-detector but the lock should belong to a different ops object in practice.
This nested lock may happen only in two drivers, emu10k1-synth and opl3, and only together with OSS emulation. Since the OSS emulation layer don't do active registration from itself, no deadlock should happen (in theory -- I may oversee something :)
Takashi
Re: BUG: possible deadlock detected! (sound) [Was: 2.6.17-rc5-mm1]
Quoted 10 lines · Takashi Iwai
This ops is a unique object assigned to a different "id" string.
The first
snd_seq_device_register_driver()called fromemu10k1_synth.cis the registration for the id "snd-synth-emu10k1".
Then ininit_device(), the corresponding devices are initialized, and one callback registers again another device for OSS sequencer with a different id "snd-seq-oss" viasnd_seq_device_new()inside the lock. Now it hits the lock-detector but the lock should belong to a different ops object in practice.
Quoted 4 lines
This nested lock may happen only in two drivers, emu10k1-synth and opl3, and only together with OSS emulation. Since the OSS emulation layer don't do active registration from itself, no deadlock should happen (in theory -- I may oversee something :)
ok fair enough
Jiri, can you test the patch below? (I don't have this hardware)
The ops structure has complex locking rules, where not all ops are equal, some are subordinate on others for some complex sound cards. This requires for lockdep checking that each individual reg_mutex is considered in separation for its locking rules.
--- sound/core/seq/seq_device.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
sound/core/seq/seq_device.c +4 -1
@@ -46,6 +46,7 @@#include <linux/kmod.h> #include <linux/slab.h> #include <linux/mutex.h> +#include <linux/lockdep.h> MODULE_AUTHOR ("Takashi Iwai <[email protected]>" );MODULE_DESCRIPTION ("ALSA sequencer device management" );
@@ -73,6 +74,8 @@ struct ops_list {struct mutex reg_mutex;struct list_head list;/* next driver */ + +struct lockdep_type_key reg_mutex_key; };
@@ -379,7 +382,7 @@ static struct ops_list * create_driver(c/* set up driver entry */ strlcpy (ops->id, id,sizeof (ops->id)); -mutex_init (&ops->reg_mutex); +mutex_init_key (&ops->reg_mutex, id, &ops->reg_mutex_key); ops->driver =DRIVER_EMPTY ;INIT_LIST_HEAD (&ops->dev_list);/* lock this instance */
Re: BUG: possible deadlock detected! (sound) [Was: 2.6.17-rc5-mm1]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Arjan van de Ven napsal(a):
Quoted 11 lines · Takashi Iwai
Quoted 10 lines
This ops is a unique object assigned to a different "id" string.
The first
snd_seq_device_register_driver()called fromemu10k1_synth.cis the registration for the id "snd-synth-emu10k1".
Then ininit_device(), the corresponding devices are initialized, and one callback registers again another device for OSS sequencer with a different id "snd-seq-oss" viasnd_seq_device_new()inside the lock. Now it hits the lock-detector but the lock should belong to a different ops object in practice.
Quoted 8 lines
Quoted 4 lines
This nested lock may happen only in two drivers, emu10k1-synth and opl3, and only together with OSS emulation. Since the OSS emulation layer don't do active registration from itself, no deadlock should happen (in theory -- I may oversee something :)
ok fair enough
Jiri, can you test the patch below? (I don't have this hardware)
Sure, but the day after tomorrow, I am going away from that machine now.
Quoted 36 lines
The ops structure has complex locking rules, where not all ops are equal, some are subordinate on others for some complex sound cards. This requires for lockdep checking that each individual
reg_mutexis considered in separation for its locking rules.Signed-off-by Arjan van de Ven <[email protected]>--- sound/core/seq/seq_device.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Index:
linux-2.6.17-rc4-mm3-lockdep/sound/core/seq/seq_device.c
===================================================================sound/core/seq/seq_device.c +3
-0@@ -46,6 +46,7 @@#include <linux/kmod.h> #include <linux/slab.h> #include <linux/mutex.h> +#include <linux/lockdep.h> MODULE_AUTHOR ("Takashi Iwai <[email protected]>" );MODULE_DESCRIPTION ("ALSA sequencer device management" );@@ -73,6 +74,8 @@ struct ops_list {struct mutex reg_mutex;struct list_head list;/* next driver */ + +struct lockdep_type_key reg_mutex_key; };
sound/core/seq/seq_device.c static struct ops_list * create_driver(c · line 388
Quoted 8 lines
sound/core/seq/seq_device.c +1
-1@@ -379,7 +382,7 @@ static struct ops_list * create_driver(c/* set up driver entry */ strlcpy (ops->id, id,sizeof (ops->id)); -mutex_init (&ops->reg_mutex); +mutex_init_key (&ops->reg_mutex, id, &ops->reg_mutex_key); ops->driver =DRIVER_EMPTY ;INIT_LIST_HEAD (&ops->dev_list);/* lock this instance */
- --
Jiri Slaby www.fi.muni.cz/~xslaby
\_.-^-._ [email protected] _.-^-._/
B67499670407CE62ACC8 22A032CC55C339D47A7E -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFEfEQAMsxVwznUen4RAkp4AJwOMUsBK4kvE54X/oxcdcIWad8oGACghO2a mZLtPAHamNSDsiNa1gOfgoE=
=CaIp
-----END PGP SIGNATURE-----
Re: BUG: possible deadlock detected! (sound) [Was: 2.6.17-rc5-mm1]
In reply to Arjan van de Ven-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Arjan van de Ven napsal(a):
Quoted 11 lines · Takashi Iwai
Quoted 10 lines
This ops is a unique object assigned to a different "id" string.
The first
snd_seq_device_register_driver()called fromemu10k1_synth.cis the registration for the id "snd-synth-emu10k1".
Then ininit_device(), the corresponding devices are initialized, and one callback registers again another device for OSS sequencer with a different id "snd-seq-oss" viasnd_seq_device_new()inside the lock. Now it hits the lock-detector but the lock should belong to a different ops object in practice.
Quoted 8 lines
Quoted 4 lines
This nested lock may happen only in two drivers, emu10k1-synth and opl3, and only together with OSS emulation. Since the OSS emulation layer don't do active registration from itself, no deadlock should happen (in theory -- I may oversee something :)
ok fair enough
Jiri, can you test the patch below? (I don't have this hardware)
It's gone in 2.6.17-rc5-mm2.
Quoted 36 lines
The ops structure has complex locking rules, where not all ops are equal, some are subordinate on others for some complex sound cards. This requires for lockdep checking that each individual
reg_mutexis considered in separation for its locking rules.Signed-off-by Arjan van de Ven <[email protected]>--- sound/core/seq/seq_device.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)Index:
linux-2.6.17-rc4-mm3-lockdep/sound/core/seq/seq_device.c
===================================================================sound/core/seq/seq_device.c +3
-0@@ -46,6 +46,7 @@#include <linux/kmod.h> #include <linux/slab.h> #include <linux/mutex.h> +#include <linux/lockdep.h> MODULE_AUTHOR ("Takashi Iwai <[email protected]>" );MODULE_DESCRIPTION ("ALSA sequencer device management" );@@ -73,6 +74,8 @@ struct ops_list {struct mutex reg_mutex;struct list_head list;/* next driver */ + +struct lockdep_type_key reg_mutex_key; };
sound/core/seq/seq_device.c static struct ops_list * create_driver(c · line 388
Quoted 8 lines
sound/core/seq/seq_device.c +1
-1@@ -379,7 +382,7 @@ static struct ops_list * create_driver(c/* set up driver entry */ strlcpy (ops->id, id,sizeof (ops->id)); -mutex_init (&ops->reg_mutex); +mutex_init_key (&ops->reg_mutex, id, &ops->reg_mutex_key); ops->driver =DRIVER_EMPTY ;INIT_LIST_HEAD (&ops->dev_list);/* lock this instance */
regards,
- --
Jiri Slaby www.fi.muni.cz/~xslaby
\_.-^-._ [email protected] _.-^-._/
B67499670407CE62ACC8 22A032CC55C339D47A7E -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFEfwdvMsxVwznUen4RAohGAKCChQYCo4EPEG0CWDPcld15mZnWTwCeKU+2 l26ws9ExkuBo1wlT5nJ+uWg=
=vgxE
-----END PGP SIGNATURE-----
Re: BUG: possible deadlock detected! (sound) [Was: 2.6.17-rc5-mm1]
In reply to Arjan van de VenAt Tue, 30 May 2006 13:06:28 +0200,
Quoted 32 lines · Arjan van de Ven
On Tue, 2006-05-30 at 147 +0159, Jiri Slaby wrote:
(I've turned your backtrace upside down to show it "chronological")
[<c05911e0>] alsa_emu10k1_synth_init+0x22/0x24 [<c0333d04>] snd_seq_device_register_driver+0x8f/0xebthis one does:
mutex_lock(&ops->reg_mutex); ... list_for_each(head, &ops->dev_list) { struct snd_seq_device *dev = list_entry(head, struct snd_seq_device, list); init_device(dev, ops); } mutex_unlock(&ops->reg_mutex);[<c0333537>] init_device+0x2c/0x94 which calls into the driver [<c0352c39>] snd_emu10k1_synth_new_device+0xe7/0x14e [<c0353f50>] snd_emux_register+0x10d/0x13f [<c0358260>] snd_emux_init_seq_oss+0x35/0x9c [<c0333aa0>] snd_seq_device_new+0x96/0x111and this one does
mutex_lock(&ops->reg_mutex); list_add_tail(&dev->list, &ops->dev_list); ops->num_devices++; mutex_unlock(&ops->reg_mutex);
Quoted 3 lines
so... on first sight this looks like a real deadlock; unless the ALSA folks can tell me why "ops" is always different, and what the lock ordering rules between those is...
This ops is a unique object assigned to a different "id" string.
The first snd_seq_device_register_driver() called from emu10k1_synth.c is the registration for the id "snd-synth-emu10k1".
Then in init_device(), the corresponding devices are initialized, and one callback registers again another device for OSS sequencer with a different id "snd-seq-oss" via snd_seq_device_new() inside the lock. Now it hits the lock-detector but the lock should belong to a different ops object in practice.
This nested lock may happen only in two drivers, emu10k1-synth and opl3, and only together with OSS emulation. Since the OSS emulation layer don't do active registration from itself, no deadlock should happen (in theory -- I may oversee something :)
Takashi
BUG: warning at ... (netlink) [Was: 2.6.17-rc5-mm1]
In reply to Andrew Morton-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Andrew Morton napsal(a):
Quoted 1 line
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
BUG: warning at /l/latest/xxx/kernel/softirq.c:86/local_bh_disable() [<c0103e66>] show_trace+0x1b/0x1d [<c01045a4>] dump_stack+0x26/0x28 [<c012708f>] local_bh_disable+0x53/0x55 [<c0399fd6>] _write_lock_bh+0x10/0x15 [<c034e314>] netlink_table_grab+0x12/0xe9 [<c034e6f6>] netlink_insert+0x2a/0x156 [<c034fa46>] netlink_kernel_create+0xad/0x143 [<c051f869>] rtnetlink_init+0x70/0xc7 [<c051fb9f>] netlink_proto_init+0x187/0x192 [<c01003cb>] init+0x12b/0x2f1 [<c0101005>] kernel_thread_helper+0x5/0xb
If more info needed, feel free to ask.
regards,
- --
Jiri Slaby www.fi.muni.cz/~xslaby
\_.-^-._ [email protected] _.-^-._/
B67499670407CE62ACC8 22A032CC55C339D47A7E -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFEfCYeMsxVwznUen4RApvNAJ94piY4mvFzO9x3qSBKL8DstkeBbgCguCnz Zzw1YFf/s3AtKVo0XgYWsek=
=x+hX
-----END PGP SIGNATURE-----
PATCH 1/1 lock validator: remove softirq.c WARN_ON
Quoted 7 lines · Jiri Slaby
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Andrew Morton napsal(a):
Quoted 1 line
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
BUG: warning at /l/latest/xxx/kernel/softirq.c:86/local_bh_disable()
ok, that WARN_ON is over-eager. Fix is below:
--------------
Subject: lock validator: remove softirq.c WARN_ON
From: Ingo Molnar <[email protected]>
there is nothing wrong with calling local_bh_disable() in irqs-off section (as long as the local_bh_enable isnt done with irqs-off), so remove this over-eager WARN_ON().
--- kernel/softirq.c | 1 - 1 file changed, 1 deletion(-)
kernel/softirq.c +0 -1
@@ -83,7 +83,6 @@ static void __local_bh_disable(unsignedvoid local_bh_disable (void ) { -WARN_ON_ONCE (irqs_disabled ());__local_bh_disable ((unsigned long )__builtin_return_address (0 )); }
Re: [patch, -rc5-mm1] lock validator: remove softirq.c WARN_ON
Hello!
Quoted 1 line
ok, that
WARN_ONis over-eager. Fix is below:
Nevertheless, I cannot figure out what's happening here.
This local_bh_disable() is called right after schedule(). No way irqs can be disabled there. What is wrong?
static void netlink_table_grab(void)
{
write_lock_bh(&nl_table_lock);
if (atomic_read(&nl_table_users)) {
DECLARE_WAITQUEUE(wait, current);
add_wait_queue_exclusive(&nl_table_wait, &wait);
for(;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (atomic_read(&nl_table_users) == 0)
break;
write_unlock_bh(&nl_table_lock);
schedule();
write_lock_bh(&nl_table_lock);
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(&nl_table_wait, &wait);
}
}Alexey
Re: [patch, -rc5-mm1] lock validator: remove softirq.c WARN_ON
Quoted 6 lines · Alexey Kuznetsov
Hello!
Quoted 1 line
ok, that
WARN_ONis over-eager. Fix is below:Nevertheless, I cannot figure out what's happening here.
Quoted 7 lines
This
local_bh_disable()is called right afterschedule(). No way irqs can be disabled there. What is wrong?static void
netlink_table_grab(void){ write_lock_bh(&nl_table_lock);
well it could be this one as well...
Quoted 2 lines
if (atomic_read(&nl_table_users)) {Re: [patch, -rc5-mm1] lock validator: remove softirq.c WARN_ON
Hello!
Quoted 5 lines
Quoted 3 lines
static void
netlink_table_grab(void){ write_lock_bh(&nl_table_lock);well it could be this one as well...
Indeed.
But it still looks as something very strange.
There are some GFP_KERNEL allocations on the way to this function.
PATCH 1/1 lock validator, fix NULL type->name bug
In reply to Andrew MortonSubject: lock validator, fix NULL type->name bug
From: Ingo Molnar <[email protected]>
this should fix the bug reported Mike Galbraith: pass in a non-NULL mutex name string even if DEBUG_MUTEXES is turned off.
--- include/linux/mutex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/mutex.h +1 -1
@@ -80,7 +80,7 @@ struct mutex_waiter {do { \static struct lockdep_type_key __key; \ \ -__mutex_init ((mutex),NULL , &__key); \ + __mutex_init((mutex), #mutex, &__key); \ } while (0)# define mutex_destroy (mutex) do { } while (0)#endif
Re: [patch, -rc5-mm1] lock validator, fix NULL type->name bug
Quoted 5 lines · Ingo Molnar
Subject: lock validator, fix NULL
type->namebug
From: Ingo Molnar <[email protected]>this should fix the bug reported Mike Galbraith: pass in a non-NULL mutex name string even if
DEBUG_MUTEXESis turned off.
Well, yes and no. It cures the oops, and it almost boots. It passes all tests, and gets to where we start mounting things...
kjournald starting. Commit interval 5 seconds EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
=====================================================
[ BUG: possible circular locking deadlock detected! ]
-----------------------------------------------------
mount/2545 is trying to acquire lock:
(&ni->mrec_lock){--..}, at: [<b13d1563>] mutex_lock+0x8/0xa
...and deadlocks.
I'll try to find out what it hates.
-Mike
Re: [patch, -rc5-mm1] lock validator, fix NULL type->name bug
Quoted 14 lines · Mike Galbraith
Quoted 5 lines · Ingo Molnar
Subject: lock validator, fix NULL
type->namebug
From: Ingo Molnar <[email protected]>this should fix the bug reported Mike Galbraith: pass in a non-NULL mutex name string even if
DEBUG_MUTEXESis turned off.Well, yes and no. It cures the oops, and it almost boots. It passes all tests, and gets to where we start mounting things...
kjournald starting. Commit interval 5 seconds EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Quoted 7 lines
=====================================================
[ BUG: possible circular locking deadlock detected! ]
-----------------------------------------------------
mount/2545 is trying to acquire lock:
(&ni->mrec_lock){--..}, at: [<b13d1563>]mutex_lock+0x8/0xa...and deadlocks.
hm, and no other messages? Are you using serial logging?
Ingo
Re: [patch, -rc5-mm1] lock validator, fix NULL type->name bug
Quoted 22 lines · Ingo Molnar
Quoted 20 lines · Mike Galbraith
Quoted 5 lines · Ingo Molnar
Subject: lock validator, fix NULL
type->namebug
From: Ingo Molnar <[email protected]>this should fix the bug reported Mike Galbraith: pass in a non-NULL mutex name string even if
DEBUG_MUTEXESis turned off.Well, yes and no. It cures the oops, and it almost boots. It passes all tests, and gets to where we start mounting things...
kjournald starting. Commit interval 5 seconds EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.=====================================================
[ BUG: possible circular locking deadlock detected! ]
-----------------------------------------------------
mount/2545 is trying to acquire lock:
(&ni->mrec_lock){--..}, at: [<b13d1563>]mutex_lock+0x8/0xa
Quoted 3 lines
Quoted 1 line
...and deadlocks.
hm, and no other messages? Are you using serial logging?
nada. Yes, serial console.
-Mike
Re: [patch, -rc5-mm1] lock validator, fix NULL type->name bug
In reply to Mike GalbraithQuoted 9 lines · Mike Galbraith
=====================================================
[ BUG: possible circular locking deadlock detected! ]
-----------------------------------------------------
mount/2545 is trying to acquire lock:
(&ni->mrec_lock){--..}, at: [<b13d1563>]mutex_lock+0x8/0xa...and deadlocks.
I'll try to find out what it hates.
It hates NTFS.
-Mike
Re: [patch, -rc5-mm1] lock validator, fix NULL type->name bug
Quoted 8 lines · Mike Galbraith
Quoted 6 lines · Mike Galbraith
=====================================================
[ BUG: possible circular locking deadlock detected! ]
-----------------------------------------------------
mount/2545 is trying to acquire lock:
(&ni->mrec_lock){--..}, at: [<b13d1563>]mutex_lock+0x8/0xa
Quoted 5 lines
Quoted 3 lines
...and deadlocks.
I'll try to find out what it hates.
It hates NTFS.
i'd still love to figure out what's going on here.
hmm ... do you have the NMI watchdog enabled? Could you try with nmi_watchdog=0?
Ingo
Re: [patch, -rc5-mm1] lock validator, fix NULL type->name bug
Quoted 12 lines · Ingo Molnar
Quoted 10 lines · Mike Galbraith
Quoted 8 lines · Mike Galbraith
=====================================================
[ BUG: possible circular locking deadlock detected! ]
-----------------------------------------------------
mount/2545 is trying to acquire lock:
(&ni->mrec_lock){--..}, at: [<b13d1563>]mutex_lock+0x8/0xa...and deadlocks.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
I'll try to find out what it hates.
It hates NTFS.
i'd still love to figure out what's going on here.
hmm ... do you have the NMI watchdog enabled? Could you try with nmi_watchdog=0?
I have nmi_watchdog=1. I'll reboot with 0 and see if it'll trigger.
I found a warning.
ip6_tables: (C) 2000-2006 Netfilter Core Teamip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.ip_conntrack version 2.4 (8191 buckets, 65528 max) - 228 bytes per conntrack
BUG: warning at kernel/lockdep.c:2398/check_flags() <b1003dd2> show_trace+0xd/0xf <b10044c0> dump_stack+0x17/0x19 <b103ae46> check_flags+0x26e/0x273 <b103da2c> lockdep_release+0x1e/0x3e6 <b13d2d10> _spin_unlock_irq+0x16/0x3b <b13d21aa> rwsem_down_read_failed+0x64/0x1d0 <b10a76fa> .text.lock.task_mmu+0x3d/0x63 <b10a8b6b> proc_pid_follow_link+0x2b/0x3a <b1081a9b> __link_path_walk+0xc1d/0xe98 <b1081d5c> link_path_walk+0x46/0xc6 <b1082057> do_path_lookup+0x10f/0x281 <b108298a> __user_walk_fd+0x32/0x45 <b107b81a> vfs_stat_fd+0x1b/0x41 <b107b8cd> vfs_stat+0x11/0x13 <b107b8e3> sys_stat64+0x14/0x28 <b13d3043> syscall_call+0x7/0xb irq event stamp: 3101 hardirqs last enabled at (3101): [<b13d3081>] restore_nocheck+0x8/0xb hardirqs last disabled at (3100): [<b13d27b5>] _spin_lock_irq+0xf/0x48 softirqs last enabled at (3094): [<b1028ae7>] __do_softirq+0xe4/0xf5 softirqs last disabled at (3085): [<b10056f4>] do_softirq+0x5a/0xca
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:02.1[A] -> GSI 18 (level, low) -> IRQ 17bt878_probe: card id=[0x1c11bd],[ Pinnacle PCTV Sat ] has DVB functions. bt878(0): Bt878 (rev 17) at 02:02.1, <6>input: i2c IR (Hauppauge) as /class/input/input2
ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-001a/ir0 [bt878 #0 [hw]]
irq: 17, latency: 32, memory: 0xea101000
saa7130/34: v4l2 driver version 0.2.14 loaded
Re: [patch, -rc5-mm1] lock validator, fix NULL type->name bug
Quoted 5 lines · Mike Galbraith
I have nmi_watchdog=1. I'll reboot with 0 and see if it'll trigger.
I found a warning.
BUG: warning at kernel/lockdep.c:2398/check_flags()
this one could be related to NMI. We are already disabling NMI on x86_64, but i thought i had it fixed up for i386 - apparently not.
Ingo
Re: [patch, -rc5-mm1] lock validator, fix NULL type->name bug
Quoted 10 lines · Ingo Molnar
Quoted 5 lines · Mike Galbraith
I have nmi_watchdog=1. I'll reboot with 0 and see if it'll trigger.
I found a warning.
BUG: warning at kernel/lockdep.c:2398/check_flags()this one could be related to NMI. We are already disabling NMI on
x86_64, but i thought i had it fixed up for i386 - apparently not.
Booted with nmi_watchdog=0, no warning and no deadlock. It produced fruit for NFTS.
=====================================================
[ BUG: possible circular locking deadlock detected! ]
-----------------------------------------------------
mount/2545 is trying to acquire lock:
(&ni->mrec_lock){--..}, at: [<b13d1563>] mutex_lock+0x8/0xa
but task is already holding lock:
(&rl->lock){----}, at: [<b1165306>] ntfs_map_runlist+0x14/0xa7
which lock already depends on the new lock,
which could lead to circular deadlocks!
the existing dependency chain (in reverse order) is:
-> #1 (&rl->lock){----}:
[<b103d9f8>] lockdep_acquire+0x61/0x77
[<b11613ae>] ntfs_readpage+0x92c/0xb53
[<b10540c8>] read_cache_page+0x95/0x15a
[<b1174b0e>] map_mft_record+0xda/0x28a
[<b117187f>] ntfs_read_locked_inode+0x5d/0x1559
[<b1174212>] ntfs_read_inode_mount+0x572/0xb30
[<b1183f8c>] ntfs_fill_super+0xc9e/0x1467
[<b1078ac2>] get_sb_bdev+0xee/0x141
[<b117eff5>] ntfs_get_sb+0x1a/0x20
[<b107880c>] vfs_kern_mount+0x9a/0x166
[<b1078920>] do_kern_mount+0x30/0x43
[<b108ea7f>] do_mount+0x464/0x7ba
[<b108ee44>] sys_mount+0x6f/0xa4
[<b13d3043>] syscall_call+0x7/0xb-> #0 (&ni->mrec_lock){--..}:
[<b103d9f8>] lockdep_acquire+0x61/0x77
[<b13d14a5>] __mutex_lock_slowpath+0x49/0xff
[<b13d1563>] mutex_lock+0x8/0xa
[<b1174a51>] map_mft_record+0x1d/0x28a
[<b1164b77>] ntfs_map_runlist_nolock+0x378/0x4a6
[<b1165360>] ntfs_map_runlist+0x6e/0xa7
[<b1161375>] ntfs_readpage+0x8f3/0xb53
[<b10540c8>] read_cache_page+0x95/0x15a
[<b11806e5>] load_system_files+0x1e3/0x1e5c
[<b1183fec>] ntfs_fill_super+0xcfe/0x1467
[<b1078ac2>] get_sb_bdev+0xee/0x141
[<b117eff5>] ntfs_get_sb+0x1a/0x20
[<b107880c>] vfs_kern_mount+0x9a/0x166
[<b1078920>] do_kern_mount+0x30/0x43
[<b108ea7f>] do_mount+0x464/0x7ba
[<b108ee44>] sys_mount+0x6f/0xa4
[<b13d3043>] syscall_call+0x7/0xbother info that might help us debug this:
2 locks held by mount/2545:
#0: (&s->s_umount){----}, at: [<b10782db>] sget+0x1d9/0x3bd #1: (&rl->lock){----}, at: [<b1165306>] ntfs_map_runlist+0x14/0xa7
stack backtrace: <b1003dd2> show_trace+0xd/0xf <b10044c0> dump_stack+0x17/0x19 <b103c9ca> print_circular_bug_tail+0x5d/0x66 <b103d145> __lockdep_acquire+0x772/0xc32 <b103d9f8> lockdep_acquire+0x61/0x77 <b13d14a5> __mutex_lock_slowpath+0x49/0xff <b13d1563> mutex_lock+0x8/0xa <b1174a51> map_mft_record+0x1d/0x28a <b1164b77> ntfs_map_runlist_nolock+0x378/0x4a6 <b1165360> ntfs_map_runlist+0x6e/0xa7 <b1161375> ntfs_readpage+0x8f3/0xb53 <b10540c8> read_cache_page+0x95/0x15a <b11806e5> load_system_files+0x1e3/0x1e5c <b1183fec> ntfs_fill_super+0xcfe/0x1467 <b1078ac2> get_sb_bdev+0xee/0x141 <b117eff5> ntfs_get_sb+0x1a/0x20 <b107880c> vfs_kern_mount+0x9a/0x166 <b1078920> do_kern_mount+0x30/0x43 <b108ea7f> do_mount+0x464/0x7ba <b108ee44> sys_mount+0x6f/0xa4 <b13d3043> syscall_call+0x7/0xb
PATCH 1/1 lock validator: disable NMI watchdog if CONFIG_LOCKDEP, i386
Quoted 6 lines · Mike Galbraith
Quoted 4 lines
Quoted 1 line
BUG: warning at kernel/lockdep.c:2398/check_flags()this one could be related to NMI. We are already disabling NMI on
x86_64, but i thought i had it fixed up for i386 - apparently not.Booted with nmi_watchdog=0, no warning and no deadlock.
ok, great. The patch below turns off NMI on i386 automatically.
-------------------
Subject: lock validator: disable NMI watchdog if CONFIG_LOCKDEP, i386
From: Ingo Molnar <[email protected]>
The NMI watchdog uses spinlocks (notifier chains, etc.), so it's not lockdep-safe at the moment.
--- arch/i386/kernel/nmi.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/i386/kernel/nmi.c +11 -0
@@ -741,6 +741,17 @@ static void stop_intel_arch_watchdog(voivoid setup_apic_nmi_watchdog (void *unused) { +#ifdef CONFIG_LOCKDEP +/* +* The NMI watchdog uses spinlocks (notifier chains, etc.), +* so it's not lockdep-safe: +*/ + nmi_watchdog =NMI_NONE ; +printk ("lockdep: disabled NMI watchdog.\n" ); + +return ; +#endif +/* only support LOCAL and IO APICs for now */ if ((nmi_watchdog !=NMI_LOCAL_APIC ) && (nmi_watchdog !=NMI_IO_APIC ))
PATCH 1/1 lock validator: fix NMI-disabling on x86_64
and NMI disabling wasnt perfect on x86_64 either. (we did it too late, which allowed a few NMI ticks to still occur.)
---------------
Subject: lock validator: fix NMI-disabling on x86_64
From: Ingo Molnar <[email protected]>
this does the NMI-watchdog disabling at the right place on x86_64.
should probably be folded into:
lock-validator-disable-nmi-watchdog-if-config_lockdep.patch
--- arch/x86_64/kernel/nmi.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-)
arch/x86_64/kernel/nmi.c +11 -12
@@ -215,18 +215,6 @@ int __init check_nmi_watchdog (void)int *counts;int cpu; -#ifdef CONFIG_LOCKDEP -/* -* The NMI watchdog uses spinlocks (notifier chains, etc.), -* so it's not lockdep-safe: -*/ - nmi_watchdog =0 ; -for_each_online_cpu (cpu) -per_cpu (nmi_watchdog_ctlblk.enabled, cpu) =0 ; - -printk ("lockdep: disabled NMI watchdog.\n" ); -return 0 ; -#endif if ((nmi_watchdog ==NMI_NONE ) || (nmi_watchdog ==NMI_DEFAULT ))return 0 ;
@@ -680,6 +668,17 @@ static void stop_intel_arch_watchdog(voivoid setup_apic_nmi_watchdog (void *unused) { +#ifdef CONFIG_LOCKDEP +/* +* The NMI watchdog uses spinlocks (notifier chains, etc.), +* so it's not lockdep-safe: +*/ + nmi_watchdog =NMI_NONE ; +printk ("lockdep: disabled NMI watchdog.\n" ); + +return ; +#endif +/* only support LOCAL and IO APICs for now */ if ((nmi_watchdog !=NMI_LOCAL_APIC ) && (nmi_watchdog !=NMI_IO_APIC ))
Re: [patch, -rc5-mm1] lock validator: disable NMI watchdog if CONFIG_LOCKDEP, i386
In reply to Ingo MolnarQuoted 10 lines · Ingo Molnar
Quoted 6 lines · Mike Galbraith
Quoted 4 lines
Quoted 1 line
BUG: warning at kernel/lockdep.c:2398/check_flags()this one could be related to NMI. We are already disabling NMI on
x86_64, but i thought i had it fixed up for i386 - apparently not.Booted with nmi_watchdog=0, no warning and no deadlock.
ok, great. The patch below turns off NMI on i386 automatically.
All is well. Back to nmi_watchdog=1, no warning, no lock.
-Mike
Re: [patch, -rc5-mm1] lock validator: disable NMI watchdog if CONFIG_LOCKDEP, i386
In reply to Ingo MolnarQuoted 3 lines · Ingo Molnar
The NMI watchdog uses spinlocks (notifier chains, etc.), so it's not lockdep-safe at the moment.
That's totally unsafe even without lockdep and should be fixed instead. I guess someone bungled the notifier chain conversion. The NMI notifiers need to be lockless.
-Andi
Re: [patch, -rc5-mm1] lock validator: disable NMI watchdog if CONFIG_LOCKDEP, i386
Quoted 8 lines · Andi Kleen
Quoted 3 lines · Ingo Molnar
The NMI watchdog uses spinlocks (notifier chains, etc.), so it's not lockdep-safe at the moment.
That's totally unsafe even without lockdep and should be fixed instead. I guess someone bungled the notifier chain conversion. The NMI notifiers need to be lockless.
yeah, totally agreed, they need to be raw notifiers. Havent had time to investigate it in detail yet - i went for the easier hack of disabling NMIs while lockdep is enabled.
Here's the kernel trace of it happening on x86_64:
<...>-417 0D... 2983us : __lockdep_acquire (ffffffff81a5cb18 0 0) <...>-417 0D... 2983us : __lockdep_acquire (0 0 0) <...>-417 0D... 2984us : do_nmi (nmi) <...>-417 0D.h. 2985us : default_do_nmi (do_nmi) <...>-417 0D.h. 2986us : atomic_notifier_call_chain (default_do_nmi) <...>-417 0D.h. 2986us : notifier_call_chain (atomic_notifier_call_chain) <...>-417 0D.h. 2987us : nmi_watchdog_tick (default_do_nmi) <...>-417 0D.h. 2987us : atomic_notifier_call_chain (nmi_watchdog_tick) <...>-417 0D.h. 2987us : notifier_call_chain (atomic_notifier_call_chain) <...>-417 0D... 2988us : trace_hardirqs_off (trace_hardirqs_off_thunk) <...>-417 0D... 2989us : __lockdep_acquire (1 1 0) <...>-417 0D... 2989us : mark_lock (__lockdep_acquire) <...>-417 0D... 2989us : mark_lock (__lockdep_acquire) <...>-417 0D... 2989us+: mark_lock (__lockdep_acquire) <...>-417 0D... 2991us : check_chain_key (__lockdep_acquire) <...>-417 0.... 2992us : _raw_spin_lock (_spin_lock) <...>-417 0.... 2992us : _spin_lock (dput)
that shouldnt be an atomic_notifier but a raw_notifier.
Ingo
Re: [patch, -rc5-mm1] lock validator: disable NMI watchdog if CONFIG_LOCKDEP, i386
Quoted 3 lines · Ingo Molnar
yeah, totally agreed, they need to be raw notifiers. Havent had time to investigate it in detail yet - i went for the easier hack of disabling NMIs while lockdep is enabled.
hm ... atomic_notifier_call_chain ought to be fine - it uses rcu_read_lock(), which uses preempt_disable(), which is NMI-safe.
so i think this NMI problem might be lockdep-specific. I think it might be the NMI iret that confuses lockdep. (and irqflags-trace in particular)
Ingo
Re: [patch, -rc5-mm1] lock validator: disable NMI watchdog if CONFIG_LOCKDEP, i386
In reply to Andi KleenQuoted 9 lines · On 30 May 2006 21:14:54 +0200 Andi Kleen <[email protected]> wrote:
Quoted 3 lines · Ingo Molnar
The NMI watchdog uses spinlocks (notifier chains, etc.), so it's not lockdep-safe at the moment.
That's totally unsafe even without lockdep and should be fixed instead. I guess someone bungled the notifier chain conversion. The NMI notifiers need to be lockless.
Confused. NMI uses notify_die(), which doesn't take locks?
We'll probably accidentally take locks when actually reporting an NMI watchdog timeout, but that doesn't seem terribly important.
Re: [patch, -rc5-mm1] lock validator: disable NMI watchdog if CONFIG_LOCKDEP, i386
In reply to Ingo MolnarQuoted 10 lines · Ingo Molnar (on Tue, 30 May 2006 14:29:50 +0200) wrote:
Quoted 6 lines · Mike Galbraith
Quoted 4 lines
Quoted 1 line
BUG: warning at kernel/lockdep.c:2398/check_flags()this one could be related to NMI. We are already disabling NMI on
x86_64, but i thought i had it fixed up for i386 - apparently not.Booted with nmi_watchdog=0, no warning and no deadlock.
Quoted 8 lines
ok, great. The patch below turns off NMI on i386 automatically.
-------------------
Subject: lock validator: disable NMI watchdog ifCONFIG_LOCKDEP, i386
From: Ingo Molnar <[email protected]>The NMI watchdog uses spinlocks (notifier chains, etc.), so it's not lockdep-safe at the moment.
Where? Since 2.6.17-rc1 the notify_die() callback uses RCU, not spinlocks.
Re: [patch, -rc5-mm1] lock validator, fix NULL type->name bug
In reply to Mike GalbraithQuoted 8 lines · Mike Galbraith
Quoted 6 lines · Mike Galbraith
=====================================================
[ BUG: possible circular locking deadlock detected! ]
-----------------------------------------------------
mount/2545 is trying to acquire lock:
(&ni->mrec_lock){--..}, at: [<b13d1563>]mutex_lock+0x8/0xa
Quoted 5 lines
Quoted 3 lines
...and deadlocks.
I'll try to find out what it hates.
It hates NTFS.
hummm. NTFS does really really weird things with mutexes... can you try to enable the mutex debugging config option to see if that triggers anything?
Hi,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
udevd/415 [HC0[0]:SC1[1]:HE1:SE0] takes:
(&base->lock#2){++..}, at: [<c012900a>] run_timer_softirq+0x3d/0x164 {in-hardirq-W} state was registered at:
[<c0139a56>] lockdep_acquire+0x69/0x82 [<c02f23ac>] _spin_lock_irqsave+0x2a/0x3a [<c0129a24>] lock_timer_base+0x29/0x55 [<c0129e48>] del_timer+0x19/0x4c [<c025925d>] ide_intr+0x13b/0x1a9 [<c014c524>] handle_IRQ_event+0x20/0x50 [<c014d48c>] handle_edge_irq+0x10a/0x14f [<c010579c>] do_IRQ+0xa1/0xc9 irq event stamp: 351479 hardirqs last enabled at (351478): [<c02f274c>] _spin_unlock_irq+0x22/0x53 hardirqs last disabled at (351479): [<c02f2324>] _spin_lock_irq+0xc/0x35 softirqs last enabled at (351434): [<c0125873>] __do_softirq+0xea/0xf0 softirqs last disabled at (351475): [<c0105689>] do_softirq+0x59/0xcb
other info that might help us debug this:
3 locks held by udevd/415:
#0: (&inode->i_mutex/1){--..}, at: [<c018150e>] lookup_create+0x1e/0x77
#1: (inode_lock){--..}, at: [<c018bf13>] new_inode+0x27/0x8e #2: (&base->lock#2){++..}, at: [<c012900a>] run_timer_softirq+0x3d/0x164
stack backtrace: [<c0103e52>] show_trace_log_lvl+0x4b/0xf4 [<c01044b3>] show_trace+0xd/0x10 [<c010457b>] dump_stack+0x19/0x1b [<c0137d63>] print_usage_bug+0x1a1/0x1ab [<c0138458>] mark_lock+0x2d7/0x514 [<c01386dc>] mark_held_locks+0x47/0x65 [<c0139745>] trace_hardirqs_on+0x12b/0x16f [<c02f2b91>] restore_nocheck+0x8/0xb
Here is dmesg
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-dmesg
Here is config
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 7 lines · Michal Piotrowski
Hi,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
Quoted 6 lines
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
udevd/415 [HC0[0]:SC1[1]:HE1:SE0] takes:
(&base->lock#2){++..}, at: [<c012900a>]run_timer_softirq+0x3d/0x164
hhmmm curious.. you don't happen to have nmi watchdog enabled??
Hi,
Quoted 4 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
It looks like a network stack problem.
May 30 17:50:34 ltg01-fedora init: Switching to runlevel: 6
May 30 17:50:35 ltg01-fedora avahi-daemon[1878]: Got SIGTERM, quitting.
May 30 17:50:35 ltg01-fedora avahi-daemon[1878]: Leaving mDNS
multicast group on interface eth0.IPv4 with address 192.168.0.
14.
May 30 17:50:35 ltg01-fedora kernel:
May 30 17:50:35 ltg01-fedora kernel: ======================================
May 30 17:50:35 ltg01-fedora kernel: [ BUG: bad unlock ordering detected! ]
May 30 17:50:35 ltg01-fedora kernel: --------------------------------------
May 30 17:50:35 ltg01-fedora kernel: avahi-daemon/1878 is trying to
release lock (&in_dev->mc_list_lock) at:
May 30 17:50:35 ltg01-fedora kernel: [<c02e693b>] ip_mc_del_src+0x5e/0xd5
May 30 17:50:35 ltg01-fedora kernel: but the next lock to release is:
May 30 17:50:35 ltg01-fedora kernel: (&im->lock){-...}, at:
[<c02e6934>] ip_mc_del_src+0x57/0xd5
May 30 17:50:35 ltg01-fedora kernel:
May 30 17:50:35 ltg01-fedora kernel: other info that might help us debug this:
May 30 17:50:35 ltg01-fedora kernel: 2 locks held by avahi-daemon/1878:
May 30 17:50:35 ltg01-fedora kernel: #0: (rtnl_mutex){--..}, at:
[<c02f0b0f>] mutex_lock+0x1c/0x1f
May 30 17:50:35 ltg01-fedora kernel: #1:
(&in_dev->mc_list_lock){-.-?}, at: [<c02e6905>]
ip_mc_del_src+0x28/0xd5
May 30 17:50:35 ltg01-fedora kernel:
May 30 17:50:35 ltg01-fedora kernel: stack backtrace:
May 30 17:50:35 ltg01-fedora kernel: [<c0103e52>] show_trace_log_lvl+0x4b/0xf4
May 30 17:50:35 ltg01-fedora kernel: [<c01044b3>] show_trace+0xd/0x10
May 30 17:50:35 ltg01-fedora kernel: [<c010457b>] dump_stack+0x19/0x1b
May 30 17:50:35 ltg01-fedora kernel: [<c0139bfa>] lockdep_release+0x18b/0x350
May 30 17:50:35 ltg01-fedora kernel: [<c02f2640>] _read_unlock+0x16/0x4d
May 30 17:50:35 ltg01-fedora kernel: [<c02e693b>] ip_mc_del_src+0x5e/0xd5
May 30 17:50:35 ltg01-fedora kernel: [<c02e69de>] ip_mc_leave_src+0x2c/0x6c
May 30 17:50:35 ltg01-fedora kernel: [<c02e6c5b>] ip_mc_leave_group+0x3d/0x97
May 30 17:50:35 ltg01-fedora kernel: [<c02c8a68>] ip_setsockopt+0x4d0/0x9a6
May 30 17:50:35 ltg01-fedora kernel: [<c02def6d>] udp_setsockopt+0x1f/0x9c
May 30 17:50:35 ltg01-fedora kernel: [<c02a7006>]
sock_common_setsockopt+0x13/0x18
May 30 17:50:35 ltg01-fedora kernel: [<c02a5956>] sys_setsockopt+0x73/0xa4
May 30 17:50:35 ltg01-fedora kernel: [<c02a6c53>] sys_socketcall+0x148/0x186
May 30 17:50:35 ltg01-fedora kernel: [<c02f2ad5>] sysenter_past_esp+0x56/0x8dHere is config
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 10 lines · Michal Piotrowski
Hi,
Quoted 4 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
It looks like a network stack problem.
Quoted 10 lines
May 30 17:50:34 ltg01-fedora init: Switching to runlevel: 6 May 30 17:50:35 ltg01-fedora avahi-daemon[1878]: Got SIGTERM, quitting. May 30 17:50:35 ltg01-fedora avahi-daemon[1878]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0. 14. May 30 17:50:35 ltg01-fedora kernel: May 30 17:50:35 ltg01-fedora kernel: ====================================== May 30 17:50:35 ltg01-fedora kernel: [ BUG: bad unlock ordering detected! ] May 30 17:50:35 ltg01-fedora kernel: -------------------------------------- May 30 17:50:35 ltg01-fedora kernel: avahi-daemon/1878 is trying to
does this fix it for you?
Mark out of order unlocking in igmp.c as such
--- net/ipv4/igmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/igmp.c +1 -1
@@ -1472,7 +1472,7 @@ static int ip_mc_del_src(struct in_devicreturn -ESRCH ; }spin_lock_bh (&pmc->lock); -read_unlock (&in_dev->mc_list_lock); +read_unlock_non_nested (&in_dev->mc_list_lock);#ifdef CONFIG_IP_MULTICAST sf_markstate (pmc);#endif
Hi Arjan,
Quoted 22 lines · Arjan van de Ven
Quoted 10 lines · Michal Piotrowski
Hi,
Quoted 4 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
It looks like a network stack problem.
Quoted 10 lines
May 30 17:50:34 ltg01-fedora init: Switching to runlevel: 6 May 30 17:50:35 ltg01-fedora avahi-daemon[1878]: Got SIGTERM, quitting. May 30 17:50:35 ltg01-fedora avahi-daemon[1878]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0. 14. May 30 17:50:35 ltg01-fedora kernel: May 30 17:50:35 ltg01-fedora kernel: ====================================== May 30 17:50:35 ltg01-fedora kernel: [ BUG: bad unlock ordering detected! ] May 30 17:50:35 ltg01-fedora kernel: -------------------------------------- May 30 17:50:35 ltg01-fedora kernel: avahi-daemon/1878 is trying to
Quoted 1 line
does this fix it for you?
Yes, thanks.
Quoted 3 lines
Mark out of order unlocking in
igmp.cas suchSigned-off-by Arjan van de Ven <[email protected]>
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Hi Ingo,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
Here is small lockdep bug
May 30 18:05:08 ltg01-fedora ainit: May 30 18:05:09 ltg01-fedora kernel: BUG: warning at /usr/src/linux-mm/kernel/lockdep.c:1853/trace_hardirqs_on() May 30 18:05:09 ltg01-fedora kernel: [<c0103e52>] show_trace_log_lvl+0x4b/0xf4 May 30 18:05:09 ltg01-fedora kernel: [<c01044b3>] show_trace+0xd/0x10 May 30 18:05:09 ltg01-fedora kernel: [<c010457b>] dump_stack+0x19/0x1b May 30 18:05:09 ltg01-fedora kernel: [<c0139701>] trace_hardirqs_on+0xe7/0x16f May 30 18:05:09 ltg01-fedora kernel: [<c02f2b91>] restore_nocheck+0x8/0xb May 30 18:05:09 ltg01-fedora shutdown[2135]: shutting down for system reboot May 30 18:05:09 ltg01-fedora init: Switching to runlevel: 6
Here is config
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 4 lines · Michal Piotrowski
Hi Ingo,
Quoted 1 line · Andrew Morton
Quoted 8 lines
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
Here is small lockdep bug
May 30 18:05:08 ltg01-fedora ainit: May 30 18:05:09 ltg01-fedora kernel: BUG: warning at/usr/src/linux-mm/kernel/lockdep.c:1853/trace_hardirqs_on()
hm. Do you have the NMI watchdog enabled? [does /proc/interrupts show any increasing NMI counts?]
Ingo
Quoted 10 lines · Ingo Molnar
Quoted 7 lines · Michal Piotrowski
Hi Ingo,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
Quoted 8 lines
Quoted 5 lines
Here is small lockdep bug
May 30 18:05:08 ltg01-fedora ainit: May 30 18:05:09 ltg01-fedora kernel: BUG: warning at/usr/src/linux-mm/kernel/lockdep.c:1853/trace_hardirqs_on()
hm. Do you have the NMI watchdog enabled? [does
/proc/interruptsshow any increasing NMI counts?]
No.
Quoted 3 lines
Ingo
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Hi,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
I get this on 2.6.17-rc5-mm1 + hot fixes + Arjan's net/ipv4/igmp.c patch.
May 30 20:25:56 ltg01-fedora kernel:
May 30 20:25:56 ltg01-fedora kernel:
=====================================================
May 30 20:25:56 ltg01-fedora kernel: [ BUG: possible circular locking
deadlock detected! ]
May 30 20:25:56 ltg01-fedora kernel:
-----------------------------------------------------
May 30 20:25:56 ltg01-fedora kernel: umount/2322 is trying to acquire lock:
May 30 20:25:56 ltg01-fedora kernel: (sb_security_lock){--..}, at:
[<c01d6400>] selinux_sb_free_security+0x17/0x4e
May 30 20:25:56 ltg01-fedora kernel:
May 30 20:25:56 ltg01-fedora kernel: but task is already holding lock:
May 30 20:25:56 ltg01-fedora kernel: (sb_lock){--..}, at:
[<c0178a89>] put_super+0x10/0x24
May 30 20:25:56 ltg01-fedora kernel:
May 30 20:25:56 ltg01-fedora kernel: which lock already depends on the new lock,
May 30 20:25:56 ltg01-fedora kernel: which could lead to circular deadlocks!
May 30 20:25:56 ltg01-fedora kernel:
May 30 20:25:56 ltg01-fedora kernel: the existing dependency chain (in
reverse order) is:
May 30 20:25:56 ltg01-fedora kernel:
May 30 20:25:56 ltg01-fedora kernel: -> #1 (sb_lock){--..}:
May 30 20:25:56 ltg01-fedora kernel: [<c0139a56>]
lockdep_acquire+0x69/0x82
May 30 20:25:56 ltg01-fedora kernel: [<c02f2171>] _spin_lock+0x21/0x2f
May 30 20:25:56 ltg01-fedora kernel: [<c01d72de>]
selinux_complete_init+0x45/0xda
May 30 20:25:56 ltg01-fedora kernel: [<c01e0a4e>]
security_load_policy+0xb3/0x22d
May 30 20:25:56 ltg01-fedora kernel: [<c01da975>]
sel_write_load+0xa3/0x2a1
May 30 20:25:56 ltg01-fedora kernel: [<c0172e2a>] vfs_write+0xcd/0x179
May 30 20:25:56 ltg01-fedora kernel: [<c01734d3>] sys_write+0x3b/0x71
May 30 20:25:56 ltg01-fedora kernel: [<c02f2aa5>]
sysenter_past_esp+0x56/0x8d
May 30 20:25:56 ltg01-fedora kernel:
May 30 20:25:56 ltg01-fedora kernel: other info that might help us debug this:
May 30 20:25:56 ltg01-fedora kernel:
May 30 20:25:56 ltg01-fedora kernel: 1 locks held by umount/2322:
May 30 20:25:56 ltg01-fedora kernel: #0: (sb_lock){--..}, at:
[<c0178a89>] put_super+0x10/0x24
May 30 20:25:56 ltg01-fedora kernel:
May 30 20:25:56 ltg01-fedora kernel: stack backtrace:
May 30 20:25:56 ltg01-fedora kernel: [<c0103e52>] show_trace_log_lvl+0x4b/0xf4
May 30 20:25:56 ltg01-fedora kernel: [<c01044b3>] show_trace+0xd/0x10
May 30 20:25:56 ltg01-fedora kernel: [<c010457b>] dump_stack+0x19/0x1b
May 30 20:25:56 ltg01-fedora kernel: [<c0138bd6>]
print_circular_bug_tail+0x59/0x64
May 30 20:25:56 ltg01-fedora kernel: [<c0139429>] __lockdep_acquire+0x848/0xa39
May 30 20:25:56 ltg01-fedora kernel: [<c0139a56>] lockdep_acquire+0x69/0x82
May 30 20:25:56 ltg01-fedora kernel: [<c02f2171>] _spin_lock+0x21/0x2f
May 30 20:25:56 ltg01-fedora kernel: [<c01d6400>]
selinux_sb_free_security+0x17/0x4e
May 30 20:25:56 ltg01-fedora kernel: [<c0178a68>] __put_super+0x24/0x35
May 30 20:25:56 ltg01-fedora kernel: [<c0178a90>] put_super+0x17/0x24
May 30 20:25:56 ltg01-fedora kernel: [<c01793a3>] deactivate_super+0xa3/0xad
May 30 20:25:56 ltg01-fedora kernel: [<c018e010>] mntput_no_expire+0x52/0x85
May 30 20:25:56 ltg01-fedora kernel: [<c017fcb0>]
path_release_on_umount+0x15/0x18
May 30 20:25:56 ltg01-fedora kernel: [<c018f535>] sys_umount+0x292/0x2aa
May 30 20:25:56 ltg01-fedora kernel: [<c018f55a>] sys_oldumount+0xd/0xf
May 30 20:25:56 ltg01-fedora kernel: [<c02f2aa5>] sysenter_past_esp+0x56/0x8dHere is config
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config2
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 18 lines · Michal Piotrowski
Hi,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
I get this on 2.6.17-rc5-mm1 + hot fixes + Arjan's
net/ipv4/igmp.cpatch.May 30 20:25:56 ltg01-fedora kernel: May 30 20:25:56 ltg01-fedora kernel: ===================================================== May 30 20:25:56 ltg01-fedora kernel: [ BUG: possible circular locking deadlock detected! ] May 30 20:25:56 ltg01-fedora kernel: ----------------------------------------------------- May 30 20:25:56 ltg01-fedora kernel: umount/2322 is trying to acquire lock: May 30 20:25:56 ltg01-fedora kernel: (sb_security_lock){--..}, at:
Quoted 1 line
[<
c01d6400>]selinux_sb_free_security+0x17/0x4e
ok so selinux_complete_init() does
spin_lock(&sb_security_lock);
next_sb:
if (!list_empty(&superblock_security_head)) {
struct superblock_security_struct *sbsec =
list_entry(superblock_security_head.next,
struct superblock_security_struct,
list);
struct super_block *sb = sbsec->sb;
spin_lock(&sb_lock);
sb->s_count++;
spin_unlock(&sb_lock);
spin_unlock(&sb_security_lock);nesting sb_lock inside sb_security_lock
while
put_super() takes the sb_lock, then calls __put_super() which calls selinux_sb_free_security which calls superblock_free_security() which takes sb_security_lock which means the nesting is opposite.
textbook AB-BA deadlock
PATCH 1/1 selinux: fix sb_lock/sb_security_lock nesting (Was: Re: 2.6.17-rc5-mm1)
Quoted 38 lines · Arjan van de Ven
Quoted 18 lines · Michal Piotrowski
Hi,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
I get this on 2.6.17-rc5-mm1 + hot fixes + Arjan's
net/ipv4/igmp.cpatch.May 30 20:25:56 ltg01-fedora kernel: May 30 20:25:56 ltg01-fedora kernel: ===================================================== May 30 20:25:56 ltg01-fedora kernel: [ BUG: possible circular locking deadlock detected! ] May 30 20:25:56 ltg01-fedora kernel: ----------------------------------------------------- May 30 20:25:56 ltg01-fedora kernel: umount/2322 is trying to acquire lock: May 30 20:25:56 ltg01-fedora kernel: (sb_security_lock){--..}, at:Quoted 1 line
[<
c01d6400>]selinux_sb_free_security+0x17/0x4eok so
selinux_complete_init()doesspin_lock(&sb_security_lock); next_sb: if (!list_empty(&superblock_security_head)) { struct superblock_security_struct *sbsec = list_entry(superblock_security_head.next, struct superblock_security_struct, list); struct super_block *sb = sbsec->sb; spin_lock(&sb_lock); sb->s_count++; spin_unlock(&sb_lock); spin_unlock(&sb_security_lock);nesting
sb_lockinsidesb_security_lock
Quoted 8 lines
while
put_super()takes thesb_lock, then calls__put_super()which callsselinux_sb_free_securitywhich callssuperblock_free_security()which takessb_security_lockwhich means the nesting is opposite.textbook AB-BA deadlock
Yes, looks that way, although oddly I don't see this warning myself upon performing a umount (w/ 2.6.17-rc5-mm1-lockdep). Patch below should fix.
---
Fix unsafe nesting of sb_lock inside sb_security_lock in selinux_complete_init. Detected by the kernel locking validator.
---
security/selinux/hooks.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-)
security/selinux/hooks.c +4 -2
@@ -4448,6 +4448,7 @@ void selinux_complete_init(void)/* Set up any superblocks initialized prior to the policy load. */ printk (KERN_INFO "SELinux: Setting up existing superblocks.\n" ); +spin_lock (&sb_lock);spin_lock (&sb_security_lock); next_sb:if (!list_empty (&superblock_security_head)) {
@@ -4456,19 +4457,20 @@ next_sb: struct superblock_security_struct, list);struct super_block *sb = sbsec->sb; -spin_lock (&sb_lock); sb->s_count++; -spin_unlock (&sb_lock);spin_unlock (&sb_security_lock); +spin_unlock (&sb_lock);down_read (&sb->s_umount);if (sb->s_root)superblock_doinit (sb,NULL );drop_super (sb); +spin_lock (&sb_lock);spin_lock (&sb_security_lock);list_del_init (&sbsec->list); goto next_sb; }spin_unlock (&sb_security_lock); +spin_unlock (&sb_lock); }/* SELinux requires early initialization in order to label
Signature · 2 lines
Stephen Smalley National Security Agency
Re: [patch 1/1] selinux: fix sb_lock/sb_security_lock nesting (Was: Re: 2.6.17-rc5-mm1)
Quoted 10 lines · Stephen Smalley
Yes, looks that way, although oddly I don't see this warning myself upon performing a umount (w/ 2.6.17-rc5-mm1-lockdep). Patch below should fix.
---
Fix unsafe nesting of
sb_lockinsidesb_security_lockinselinux_complete_init. Detected by the kernel locking validator.Signed-off-by Stephen Smalley <[email protected]>
Quoted 8 lines · Michal Piotrowski
Hi,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
I get this on 2.6.17-rc5-mm1 + hot fixes + Arjan's
net/ipv4/igmp.cpatch.
since Andrew asked how to read this stuff.....
Quoted 6 lines
May 30 20:25:56 ltg01-fedora kernel: May 30 20:25:56 ltg01-fedora kernel: ===================================================== May 30 20:25:56 ltg01-fedora kernel: [ BUG: possible circular lockingdeadlock detected! ]
this message means basically an AB-BA deadlock is found
Quoted 8 lines
May 30 20:25:56 ltg01-fedora kernel:
-----------------------------------------------------
May 30 20:25:56 ltg01-fedora kernel: umount/2322 is trying to acquire lock:
May 30 20:25:56 ltg01-fedora kernel: (sb_security_lock){--..}, at:
[<c01d6400>] selinux_sb_free_security+0x17/0x4e
May 30 20:25:56 ltg01-fedora kernel:
May 30 20:25:56 ltg01-fedora kernel: but task is already holding lock:
May 30 20:25:56 ltg01-fedora kernel: (sb_lock){--..}, at:we're holding "sb_lock" already, and are trying to get sb_security_lock
Quoted 3 lines
[<
c0178a89>]put_super+0x10/0x24May 30 20:25:56 ltg01-fedora kernel: May 30 20:25:56 ltg01-fedora kernel: which lock already depends on the new lock,
... but there was an observed code sequence before which was the other way around ...
Quoted 1 line
May 30 20:25:56 ltg01-fedora kernel: which could lead to circular deadlocks!
yes.
Quoted 3 lines
May 30 20:25:56 ltg01-fedora kernel: May 30 20:25:56 ltg01-fedora kernel: the existing dependency chain (inreverse order) is:
now it's going to print the previously observed behavior (backwards), and give a backtrace of where that was acquired
Quoted 2 lines
May 30 20:25:56 ltg01-fedora kernel:
May 30 20:25:56 ltg01-fedora kernel: -> #1 (sb_lock){--..}:since it prints backwards, this is the latest of the 2 locks taken in the old situaion
Quoted 5 lines
May 30 20:25:56 ltg01-fedora kernel: [<c0139a56>] lockdep_acquire+0x69/0x82 May 30 20:25:56 ltg01-fedora kernel: [<c02f2171>] _spin_lock+0x21/0x2f May 30 20:25:56 ltg01-fedora kernel: [<c01d72de>]
selinux_complete_init+0x45/0xda
and it was in selinux_complete_init
for some reason the #0 is not being printed here (it normally is), which would give a simliar backtrace. In this case it was ok, selinux_complete_init was the sole guilty party.
Quoted 3 lines
May 30 20:25:56 ltg01-fedora kernel: May 30 20:25:56 ltg01-fedora kernel: other info that might help us debug this: May 30 20:25:56 ltg01-fedora kernel:
now it's going to print all the locks we own currently, and where those were taken; not just the ones that are part of the deadlock (that was printed before)
Quoted 3 lines
May 30 20:25:56 ltg01-fedora kernel: 1 locks held by umount/2322: May 30 20:25:56 ltg01-fedora kernel: #0: (sb_lock){--..}, at:[<
c0178a89>]put_super+0x10/0x24
ok so in put_super we took sb_lock. [*]
Quoted 10 lines
May 30 20:25:56 ltg01-fedora kernel: May 30 20:25:56 ltg01-fedora kernel: stack backtrace: May 30 20:25:56 ltg01-fedora kernel: [<c0103e52>] show_trace_log_lvl+0x4b/0xf4 May 30 20:25:56 ltg01-fedora kernel: [<c01044b3>] show_trace+0xd/0x10 May 30 20:25:56 ltg01-fedora kernel: [<c010457b>] dump_stack+0x19/0x1b May 30 20:25:56 ltg01-fedora kernel: [<c0138bd6>] print_circular_bug_tail+0x59/0x64 May 30 20:25:56 ltg01-fedora kernel: [<c0139429>] __lockdep_acquire+0x848/0xa39 May 30 20:25:56 ltg01-fedora kernel: [<c0139a56>] lockdep_acquire+0x69/0x82 May 30 20:25:56 ltg01-fedora kernel: [<c02f2171>] _spin_lock+0x21/0x2f
these are just the lockdep printing stuff
Quoted 2 lines
May 30 20:25:56 ltg01-fedora kernel: [<c01d6400>]
selinux_sb_free_security+0x17/0x4e
but here it gets interesting; this is the function that triggered the final deadlock message (well we knew that already from the first line of the message), which gets called from
Quoted 1 line
May 30 20:25:56 ltg01-fedora kernel: [<c0178a68>] __put_super+0x24/0x35
which gets called from
Quoted 1 line
May 30 20:25:56 ltg01-fedora kernel: [<c0178a90>] put_super+0x17/0x24
... but wait we know this one already from where I put [*], so we're now done. put_super takes sb_lock, then calls __put_super which calls selinux_sb_free_security which takes sb_security lock.
Quoted 1 line
From the old pattern we knew the opposite order in
selinux_complete_init(), and we have our AB-BA deadlock
Quoted 5 lines
May 30 20:25:56 ltg01-fedora kernel: [<c01793a3>] deactivate_super+0xa3/0xad May 30 20:25:56 ltg01-fedora kernel: [<c018e010>] mntput_no_expire+0x52/0x85 May 30 20:25:56 ltg01-fedora kernel: [<c017fcb0>] path_release_on_umount+0x15/0x18 May 30 20:25:56 ltg01-fedora kernel: [<c018f535>] sys_umount+0x292/0x2aa
well we also now know that it came from a sys_umount; that might help chasing stuff down if it's more fuzzy than this example
Quoted 4 lines · Arjan van de Ven
Quoted 1 line
May 30 20:25:56 ltg01-fedora kernel: which lock already depends on the new lock,... but there was an observed code sequence before which was the other way around ...
That phrase could use some rewording IMO. It sounds more like a question than a statement.
Dave
Signature · 1 line
http://www.codemonkey.org.uk
Quoted 8 lines · Dave Jones
Quoted 4 lines · Arjan van de Ven
Quoted 1 line
May 30 20:25:56 ltg01-fedora kernel: which lock already depends on the new lock,... but there was an observed code sequence before which was the other way around ...
That phrase could use some rewording IMO. It sounds more like a question than a statement.
if you have suggestions please share them... you're the native United Kingdomian.... :)
Hi,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
SCSI or libata problem.
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
init/1 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&base->lock#2){++..}, at: [<c0129a24>] lock_timer_base+0x29/0x55 {in-hardirq-W} state was registered at:
[<c0139a56>] lockdep_acquire+0x69/0x82 [<c02f237c>] _spin_lock_irqsave+0x2a/0x3a [<c0129a24>] lock_timer_base+0x29/0x55 [<c0129e48>] del_timer+0x19/0x4c [<c02651e2>] scsi_delete_timer+0xe/0x1f [<c0262964>] scsi_done+0xb/0x19 [<c0273ed3>] ata_scsi_qc_complete+0x73/0x7f [<c027024a>] __ata_qc_complete+0x26c/0x274 [<c02704f0>] ata_qc_complete+0xd5/0xdc [<c0270c42>] ata_hsm_qc_complete+0x201/0x210 [<c02713e7>] ata_hsm_move+0x796/0x7ac [<c027314e>] ata_interrupt+0x173/0x1b4 [<c014c4f4>] handle_IRQ_event+0x20/0x50 [<c014d76e>] handle_level_irq+0xa1/0xeb [<c010579c>] do_IRQ+0xa1/0xc9 irq event stamp: 576924 hardirqs last enabled at (576923): [<c02f26c7>] _spin_unlock_irqrestore+0x36/0x69 hardirqs last disabled at (576924): [<c02f2361>] _spin_lock_irqsave+0xf/0x3a softirqs last enabled at (576878): [<c0125873>] __do_softirq+0xea/0xf0 softirqs last disabled at (576869): [<c0105689>] do_softirq+0x59/0xcb
other info that might help us debug this:
1 locks held by init/1:
#0: (&base->lock#2){++..}, at: [<c0129a24>] lock_timer_base+0x29/0x55
stack backtrace: [<c0103e52>] show_trace_log_lvl+0x4b/0xf4 [<c01044b3>] show_trace+0xd/0x10 [<c010457b>] dump_stack+0x19/0x1b [<c0137d63>] print_usage_bug+0x1a1/0x1ab [<c0138458>] mark_lock+0x2d7/0x514 [<c01386dc>] mark_held_locks+0x47/0x65 [<c0139745>] trace_hardirqs_on+0x12b/0x16f [<c02f2b61>] restore_nocheck+0x8/0xb
Here is config
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config2
Here is dmesg
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-dmesg2
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Sorry, I forgot CC.
---------- Forwarded message ----------
From: Michal Piotrowski <[email protected]>
Date: 30-May-2006 20:55
Subject: Re: 2.6.17-rc5-mm1
To: Andrew Morton <[email protected]>
Cc: [email protected]
Hi,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
SCSI or libata problem.
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
init/1 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&base->lock#2){++..}, at: [<c0129a24>] lock_timer_base+0x29/0x55 {in-hardirq-W} state was registered at:
[<c0139a56>] lockdep_acquire+0x69/0x82 [<c02f237c>] _spin_lock_irqsave+0x2a/0x3a [<c0129a24>] lock_timer_base+0x29/0x55 [<c0129e48>] del_timer+0x19/0x4c [<c02651e2>] scsi_delete_timer+0xe/0x1f [<c0262964>] scsi_done+0xb/0x19 [<c0273ed3>] ata_scsi_qc_complete+0x73/0x7f [<c027024a>] __ata_qc_complete+0x26c/0x274 [<c02704f0>] ata_qc_complete+0xd5/0xdc [<c0270c42>] ata_hsm_qc_complete+0x201/0x210 [<c02713e7>] ata_hsm_move+0x796/0x7ac [<c027314e>] ata_interrupt+0x173/0x1b4 [<c014c4f4>] handle_IRQ_event+0x20/0x50 [<c014d76e>] handle_level_irq+0xa1/0xeb [<c010579c>] do_IRQ+0xa1/0xc9 irq event stamp: 576924 hardirqs last enabled at (576923): [<c02f26c7>] _spin_unlock_irqrestore+0x36/0x69 hardirqs last disabled at (576924): [<c02f2361>] _spin_lock_irqsave+0xf/0x3a softirqs last enabled at (576878): [<c0125873>] __do_softirq+0xea/0xf0 softirqs last disabled at (576869): [<c0105689>] do_softirq+0x59/0xcb
other info that might help us debug this:
1 locks held by init/1:
#0: (&base->lock#2){++..}, at: [<c0129a24>] lock_timer_base+0x29/0x55
stack backtrace: [<c0103e52>] show_trace_log_lvl+0x4b/0xf4 [<c01044b3>] show_trace+0xd/0x10 [<c010457b>] dump_stack+0x19/0x1b [<c0137d63>] print_usage_bug+0x1a1/0x1ab [<c0138458>] mark_lock+0x2d7/0x514 [<c01386dc>] mark_held_locks+0x47/0x65 [<c0139745>] trace_hardirqs_on+0x12b/0x16f [<c02f2b61>] restore_nocheck+0x8/0xb
Here is config
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config2
Here is dmesg
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-dmesg2
Regards,
Michal
--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 1 line · Michal Piotrowski
SCSI or libata problem.
i think SCSI and libata is innocent here.
Quoted 8 lines
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.1 locks held by init/1:
#0: (&base->lock#2){++..}, at: [<c0129a24>]lock_timer_base+0x29/0x55
Quoted 9 lines
stack backtrace: [<c0103e52>] show_trace_log_lvl+0x4b/0xf4 [<c01044b3>] show_trace+0xd/0x10 [<c010457b>] dump_stack+0x19/0x1b [<c0137d63>] print_usage_bug+0x1a1/0x1ab [<c0138458>] mark_lock+0x2d7/0x514 [<c01386dc>] mark_held_locks+0x47/0x65 [<c0139745>] trace_hardirqs_on+0x12b/0x16f [<c02f2b61>] restore_nocheck+0x8/0xb
weird. We are holding base->lock#2 [CPU#1's timer base lock], _and_ we execute restore_nocheck - which is a return-to-userspace thing.
unfortunately the stacktrace provides no clues of how we got here. For such nasty cases i have a kernel tracing patch prepared, you can get it from:
http://redhat.com/~mingo/lockdep-patches/latency-tracing-lockdep.patch
just apply it ontop of your current tree and accept all the new .config options as the kernel suggests them to you. Then rebuild and reboot into the kernel, and reproduce the lockdep bug. Once such a bug is reported, /proc/latency_trace should have a full kernel trace leading up to the bug. Please upload that trace to your site and send us the URL.
(the tracer runs nonstop and it saves the current trace if it encounters a lockdep bug. That way i can see the history of the bug.)
if possible it would be nice to boot with maxcpus=1 as well, to make sure we have all relevant kernel activity traced. (assuming that booting with maxcpus=1 does not make the bug go away)
Ingo
Quoted 27 lines · Ingo Molnar
Quoted 1 line · Michal Piotrowski
SCSI or libata problem.
i think SCSI and libata is innocent here.
Quoted 8 lines
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.1 locks held by init/1:
#0: (&base->lock#2){++..}, at: [<c0129a24>]lock_timer_base+0x29/0x55Quoted 9 lines
stack backtrace: [<c0103e52>] show_trace_log_lvl+0x4b/0xf4 [<c01044b3>] show_trace+0xd/0x10 [<c010457b>] dump_stack+0x19/0x1b [<c0137d63>] print_usage_bug+0x1a1/0x1ab [<c0138458>] mark_lock+0x2d7/0x514 [<c01386dc>] mark_held_locks+0x47/0x65 [<c0139745>] trace_hardirqs_on+0x12b/0x16f [<c02f2b61>] restore_nocheck+0x8/0xbweird. We are holding base->lock#2 [CPU#1's timer base lock], _and_ we execute
restore_nocheck- which is a return-to-userspace thing.
Quoted 8 lines
unfortunately the stacktrace provides no clues of how we got here. For such nasty cases i have a kernel tracing patch prepared, you can get it from:
http://redhat.com/~mingo/lockdep-patches/latency-tracing-lockdep.patch
just apply it ontop of your current tree and accept all the new .config options as the kernel suggests them to you.
I can't boot with that patch. I even don't see "Uncompressing Linux..." - machine reboots.
I have 2.6.17-rc5-mm1 + genirq-cleanup-remove-irq_descp-fix.patch lock-validator-irqtrace-support-non-x86-architectures.patch lock-validator-special-locking-sb-s_umount-2-fix.patch from hot fixes
+
Arjan's net/ipv4/igmp.c patch.
BTW. I got error when compiling kernel/latency.c, so I change
if (DEBUG_WARN_ON((val < PREEMPT_MASK) && !(preempt_count() & PREEMPT_MASK))))
to
if (DEBUG_WARN_ON((val < PREEMPT_MASK) && !(preempt_count() & PREEMPT_MASK)))
Here is config
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config3
Here is "Kernel Bug : The Movie" (4,3MB)
www.stardust.webpages.pl/files/crap/kbtm.avi
[snip]
Quoted 3 lines
Ingo
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 5 lines · Michal Piotrowski
Quoted 4 lines
http://redhat.com/~mingo/lockdep-patches/latency-tracing-lockdep.patch
just apply it ontop of your current tree and accept all the new .config options as the kernel suggests them to you.
Quoted 9 lines
I can't boot with that patch. I even don't see "Uncompressing Linux..." - machine reboots.
I have 2.6.17-rc5-mm1 + genirq-cleanup-remove-irq_descp-fix.patch lock-validator-irqtrace-support-non-x86-architectures.patch lock-validator-special-locking-sb-s_umount-2-fix.patch from hot fixes
+
Arjan'snet/ipv4/igmp.cpatch.
could you try to 1) disable PREEMPT, 2) apply the -V2 rollup of all fixes so far to 2.6.17-rc5-mm1:
http://redhat.com/~mingo/lockdep-patches/lockdep-combo-2.6.17-rc5-mm1.patch
? I'll try your config meanwhile.
Ingo
Quoted 6 lines · Ingo Molnar
could you try to 1) disable PREEMPT, 2) apply the -V2 rollup of all fixes so far to 2.6.17-rc5-mm1:
http://redhat.com/~mingo/lockdep-patches/lockdep-combo-2.6.17-rc5-mm1.patch
? I'll try your config meanwhile.
PREEMPT wasnt the problem but CONFIG_DEBUG_STACKOVERFLOW (at least). There's some other debug option that seems incompatible too - i'm still trying to figure out which one.
Ingo
Quoted 3 lines · Ingo Molnar
PREEMPT wasnt the problem but
CONFIG_DEBUG_STACKOVERFLOW(at least). There's some other debug option that seems incompatible too - i'm still trying to figure out which one.
narrowed it down to:
.config.bad01 renamed from .config.good01 +11 -10
@@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.17-rc5-mm1-lockdep -# Wed May 31 00:23:12 2006 +# Wed May 31 00:19:45 2006 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y
@@ -1798,7 +1798,7 @@ CONFIG_PROVE_RWSEM_LOCKING=y CONFIG_LOCKDEP=y CONFIG_DEBUG_LOCKDEP=y CONFIG_TRACE_IRQFLAGS=y -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_LOCKING_API_SELFTESTS=y CONFIG_WAKEUP_TIMING=y # CONFIG_WAKEUP_LATENCY_HIST is not set
@@ -1807,18 +1807,19 @@ CONFIG_LATENCY_TIMING=y CONFIG_LATENCY_TRACE=y CONFIG_MCOUNT=y # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set +CONFIG_DEBUG_HIGHMEM=y CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_INFO=y +CONFIG_PAGE_OWNER=y CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_VM=y CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set +CONFIG_UNWIND_INFO=y +CONFIG_STACK_UNWIND=y CONFIG_FORCED_INLINING=y -# CONFIG_DEBUG_SYNCHRO_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_PROFILE_LIKELY is not set +CONFIG_DEBUG_SYNCHRO_TEST=y +CONFIG_RCU_TORTURE_TEST=y +CONFIG_PROFILE_LIKELY=y # CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set # CONFIG_KGDB is not set CONFIG_EARLY_PRINTK=y
i'm continuing the config-bisect.
Ingo
Quoted 7 lines · Ingo Molnar
Quoted 3 lines · Ingo Molnar
PREEMPT wasnt the problem but
CONFIG_DEBUG_STACKOVERFLOW(at least). There's some other debug option that seems incompatible too - i'm still trying to figure out which one.narrowed it down to:
CONFIG_PROFILE_LIKELY it is, please disable it in your config, along with CONFIG_DEBUG_STACKOVERFLOW:
.config.bad01 renamed from .config.good02 +2 -2
@@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.17-rc5-mm1-lockdep -# Wed May 31 00:26:04 2006 +# Wed May 31 00:19:45 2006 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y
@@ -1819,7 +1819,7 @@ CONFIG_STACK_UNWIND=y CONFIG_FORCED_INLINING=y CONFIG_DEBUG_SYNCHRO_TEST=y CONFIG_RCU_TORTURE_TEST=y -# CONFIG_PROFILE_LIKELY is not set +CONFIG_PROFILE_LIKELY=y # CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set # CONFIG_KGDB is not set CONFIG_EARLY_PRINTK=y
Ingo
Quoted 5 lines · Ingo Molnar
Quoted 2 lines · Ingo Molnar
* Ingo Molnar <[email protected]> wrote:
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
PREEMPT wasnt the problem but
CONFIG_DEBUG_STACKOVERFLOW(at least). There's some other debug option that seems incompatible too - i'm still trying to figure out which one.narrowed it down to:
CONFIG_PROFILE_LIKELYit is, please disable it in your config, along withCONFIG_DEBUG_STACKOVERFLOW:
Ok, thanks.
Quoted 3 lines
Ingo
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 2 lines · Ingo Molnar
CONFIG_PROFILE_LIKELYit is, please disable it in your config, along withCONFIG_DEBUG_STACKOVERFLOW:
i've also uploaded an updated tracing patch to:
http://redhat.com/~mingo/lockdep-patches/latency-tracing-lockdep.patch
which forces CONFIG_PROFILE_LIKELY off if LATENCY_TRACE is enabled.
Ingo
Quoted 2 lines · Ingo Molnar
CONFIG_PROFILE_LIKELYit is, please disable it in your config, along withCONFIG_DEBUG_STACKOVERFLOW:
the tracer fix for PROFILE_LIKELY is below. I have also uploaded an updated tracing patch to
http://redhat.com/~mingo/lockdep-patches/latency-tracing-lockdep.patch
which allows the enabling of PROFILE_LIKELY && LATENCY_TRACING again. There's an updated combo patch too:
http://redhat.com/~mingo/lockdep-patches/lockdep-combo-2.6.17-rc5-mm1.patch
for easy pickup of all current fixes against mm1 baseline.
Ingo
lib/likely_prof.c +1 -1
@@ -20,7 +20,7 @@static struct likeliness *likeliness_head; -int do_check_likely (struct likeliness *likeliness,int ret) +int notrace do_check_likely(struct likeliness *likeliness, int ret) {static unsigned long likely_lock;
Quoted 18 lines · Ingo Molnar
Quoted 5 lines · Michal Piotrowski
Quoted 4 lines
http://redhat.com/~mingo/lockdep-patches/latency-tracing-lockdep.patch
just apply it ontop of your current tree and accept all the new .config options as the kernel suggests them to you.
Quoted 9 lines
I can't boot with that patch. I even don't see "Uncompressing Linux..." - machine reboots.
I have 2.6.17-rc5-mm1 + genirq-cleanup-remove-irq_descp-fix.patch lock-validator-irqtrace-support-non-x86-architectures.patch lock-validator-special-locking-sb-s_umount-2-fix.patch from hot fixes
+
Arjan'snet/ipv4/igmp.cpatch.
Quoted 4 lines
could you try to 1) disable PREEMPT, 2) apply the -V2 rollup of all fixes so far to 2.6.17-rc5-mm1:
http://redhat.com/~mingo/lockdep-patches/lockdep-combo-2.6.17-rc5-mm1.patch
I'll try to reproduce that bug now... but here is new one :)
BUG: key f7155db0 not in .data! ( modprobe-485 |#0): new 15286092 us user-latency. stopped custom tracer. BUG: warning at /usr/src/linux-mm/kernel/lockdep.c:1985/lockdep_init_map() [<c0104208>] show_trace+0x1b/0x20 [<c01042e6>] dump_stack+0x1f/0x24 [<c0136e26>] lockdep_init_map+0x65/0xb0 [<c0134a62>] __mutex_init+0x46/0x50 [<f98b72a3>] find_driver+0xb7/0x115 [snd_seq_device] [<f98b776f>] snd_seq_device_register_driver+0x42/0xeb [snd_seq_device] [<f887012d>] alsa_seq_oss_init+0x12d/0x158 [snd_seq_oss] [<c013fdad>] sys_init_module+0x96/0x1d4 [<c02eb442>] sysenter_past_esp+0x63/0xa1 ---------------------------
| preempt count: 00000000 ]
| 0-level deep critical section nesting:
----------------------------------------
Here is dmesg
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-dmesg3
Here is new config (without some debugging options)
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config4
Quoted 5 lines
? I'll try your config meanwhile.
Ingo
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 6 lines · Michal Piotrowski
I'll try to reproduce that bug now... but here is new one :)
BUG: key f7155db0 not in .data! ( modprobe-485 |#0): new 15286092 us user-latency. stopped custom tracer. BUG: warning at /usr/src/linux-mm/kernel/lockdep.c:1985/lockdep_init_map()
Arjan's sound patch is wrong: the key must not be in a dynamic variable!
Could you try the patch below? This uses the ID string as the key. (the ID string seems to be based on static kernel strings most of the time, so this might as well work)
Ingo
sound/core/seq/seq_device.c +1 -1
@@ -382,7 +382,7 @@ static struct ops_list * create_driver(c/* set up driver entry */ strlcpy (ops->id, id,sizeof (ops->id)); -mutex_init_key (&ops->reg_mutex, id, &ops->reg_mutex_key); +mutex_init_key (&ops->reg_mutex, id, (struct lockdep_type_key )id); ops->driver =DRIVER_EMPTY ;INIT_LIST_HEAD (&ops->dev_list);/* lock this instance */
Quoted 3 lines · Ingo Molnar
Could you try the patch below? This uses the ID string as the key. (the ID string seems to be based on static kernel strings most of the time, so this might as well work)
that patch should be:
sound/core/seq/seq_device.c +1 -3
@@ -74,8 +74,6 @@ struct ops_list {struct mutex reg_mutex;struct list_head list;/* next driver */ - -struct lockdep_type_key reg_mutex_key; };
@@ -382,7 +380,7 @@ static struct ops_list * create_driver(c/* set up driver entry */ strlcpy (ops->id, id,sizeof (ops->id)); -mutex_init_key (&ops->reg_mutex, id, &ops->reg_mutex_key); +mutex_init_key (&ops->reg_mutex, id, (struct lockdep_type_key *)id); ops->driver =DRIVER_EMPTY ;INIT_LIST_HEAD (&ops->dev_list);/* lock this instance */
Quoted 9 lines · Ingo Molnar
Quoted 3 lines · Ingo Molnar
Could you try the patch below? This uses the ID string as the key. (the ID string seems to be based on static kernel strings most of the time, so this might as well work)
that patch should be:
Thanks, problem solved.
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Steven Rostedt
maintainerQuoted 4 lines · Michal Piotrowski
Quoted 3 lines · Ingo Molnar
* Ingo Molnar <[email protected]> wrote:
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Could you try the patch below? This uses the ID string as the key. (the ID string seems to be based on static kernel strings most of the time, so this might as well work)
that patch should be:
Thanks, problem solved.
Had the same problem, and I can also confirm that that patch fixes it.
-- Steve
Quoted 4 lines · Michal Piotrowski
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
sorry - the messages are indeed cryptic, partly because there are lots of illegal state transitions and the printout is atomated, and partly to keep the already sizable lockdep printouts as compact as possible.
What happened here is that a lock (-type) that had the {in-hardirq-W} state bit set, and lockdep observed an event that also sets the {hardirq-on-W} state bit: illegal.
here is a rough translation of the usage history state bits:
{in-hardirq-W}: lock was exclusively acquired in hardirq context {in-hardirq-R}: lock was read-acquired in hardirq context {in-softirq-W}: lock was exclusively acquired in softirq context {in-softirq-R}: lock was read-acquired in softirq context {hardirq-on-W}: lock was held exclusively with hardirqs enabled {hardirq-on-R}: lock was read-held with hardirqs enabled {softirq-on-W}: lock was held exclusively with softirqs enabled {softirq-on-R}: lock was read-held with softirqs enabled
to interpret the lock state at a glance, there's an even shorter representation of the state bits:
(&base->lock#2){++..}
^^^^
'+' : irq-safe [lock was taken in irq context]
'-' : irq-unsafe [lock was taken with irqs enabled] '.' : unknown [lock has not yet become irq-safe or irq-unsafe]
'?' : read-locked with both hardirq context and with irqs enabled
the first character is for exclusive-locking in hardirqs, the second for exclusive-locking in softirqs, the third is for read-locking in hardirqs, the fourth is for read-locking in softirqs.
this means that the "{++..}" sequence shows that this lock is hardirq-safe and softirq-safe, and was never read-locked. [the later one is not surprising from a spinlock - but lockdep doesnt know that it's a spinlock, it deals with all lock types in a unified way]
(more details about the usage history state bits are in Documentation/lockdep-design.txt and in include/linux/lockdep.h)
Ingo
Quoted 13 lines · On Tue, 30 May 2006 20:55:52 +0200 "Michal Piotrowski"…
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
SCSI or libata problem.
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
init/1 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&base->lock#2){++..}, at: [<c0129a24>]lock_timer_base+0x29/0x55
{in-hardirq-W} state was registered at:
Quoted 15 lines
[<c0139a56>] lockdep_acquire+0x69/0x82 [<c02f237c>] _spin_lock_irqsave+0x2a/0x3a [<c0129a24>] lock_timer_base+0x29/0x55 [<c0129e48>] del_timer+0x19/0x4c [<c02651e2>] scsi_delete_timer+0xe/0x1f [<c0262964>] scsi_done+0xb/0x19 [<c0273ed3>] ata_scsi_qc_complete+0x73/0x7f [<c027024a>] __ata_qc_complete+0x26c/0x274 [<c02704f0>] ata_qc_complete+0xd5/0xdc [<c0270c42>] ata_hsm_qc_complete+0x201/0x210 [<c02713e7>] ata_hsm_move+0x796/0x7ac [<c027314e>] ata_interrupt+0x173/0x1b4 [<c014c4f4>] handle_IRQ_event+0x20/0x50 [<c014d76e>] handle_level_irq+0xa1/0xeb [<c010579c>] do_IRQ+0xa1/0xc9
That's the second report of del_timer-in-hardirq being a bug.
Unfortunately I'm unable to decrypt the local validator's output. Perhaps when Arjan and Ingo do the analysis of these reports they could provide a little guidance into what the traces are actually telling us, so that others can learn to use them?
Quoted 51 lines · Michal Piotrowski
Hi,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
SCSI or libata problem.
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
init/1 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&base->lock#2){++..}, at: [<c0129a24>]lock_timer_base+0x29/0x55
{in-hardirq-W} state was registered at:[<c0139a56>] lockdep_acquire+0x69/0x82 [<c02f237c>] _spin_lock_irqsave+0x2a/0x3a [<c0129a24>] lock_timer_base+0x29/0x55 [<c0129e48>] del_timer+0x19/0x4c [<c02651e2>] scsi_delete_timer+0xe/0x1f [<c0262964>] scsi_done+0xb/0x19 [<c0273ed3>] ata_scsi_qc_complete+0x73/0x7f [<c027024a>] __ata_qc_complete+0x26c/0x274 [<c02704f0>] ata_qc_complete+0xd5/0xdc [<c0270c42>] ata_hsm_qc_complete+0x201/0x210 [<c02713e7>] ata_hsm_move+0x796/0x7ac [<c027314e>] ata_interrupt+0x173/0x1b4 [<c014c4f4>] handle_IRQ_event+0x20/0x50 [<c014d76e>] handle_level_irq+0xa1/0xeb [<c010579c>] do_IRQ+0xa1/0xc9 irq event stamp: 576924 hardirqs last enabled at (576923): [<c02f26c7>] _spin_unlock_irqrestore+0x36/0x69 hardirqs last disabled at (576924): [<c02f2361>] _spin_lock_irqsave+0xf/0x3a softirqs last enabled at (576878): [<c0125873>] __do_softirq+0xea/0xf0 softirqs last disabled at (576869): [<c0105689>] do_softirq+0x59/0xcbother info that might help us debug this:
1 locks held by init/1:
#0: (&base->lock#2){++..}, at: [<c0129a24>]lock_timer_base+0x29/0x55stack backtrace: [<c0103e52>] show_trace_log_lvl+0x4b/0xf4 [<c01044b3>] show_trace+0xd/0x10 [<c010457b>] dump_stack+0x19/0x1b [<c0137d63>] print_usage_bug+0x1a1/0x1ab [<c0138458>] mark_lock+0x2d7/0x514 [<c01386dc>] mark_held_locks+0x47/0x65 [<c0139745>] trace_hardirqs_on+0x12b/0x16f [<c02f2b61>] restore_nocheck+0x8/0xb
Quoted 5 lines
Here is config
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config2Here is dmesg
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-dmesg2
I can't reproduce this bug with current
http://redhat.com/~mingo/lockdep-patches/latency-tracing-lockdep.patch
and updated
http://redhat.com/~mingo/lockdep-patches/lockdep-combo-2.6.17-rc5-mm1.patch
but these two bugs looks similar (both were previously reported). Both appears while starting avahi daemon.
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/dmesg_1
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/dmesg_2
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/latency_trace_1.bz2
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/latency_trace_2.bz2
Here is config
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config5
I haven't noticed these bugs with "maxcpus=1" boot param.
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 8 lines · Michal Piotrowski
but these two bugs looks similar (both were previously reported). Both appears while starting avahi daemon.
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/dmesg_1
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/dmesg_2http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/latency_trace_1.bz2
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/latency_trace_2.bz2
thanks - these traces made it really easy to spot the problem! The problem seems to be caused by a pagefault:
<...>-1 0D..1 10648us : check_chain_key (__lockdep_acquire) <...>-1 0D..1 10649us+: _raw_spin_lock (_spin_lock_irqsave) <...>-1 0D..1 10651us : do_page_fault (error_code) <...>-1 0D..1 10652us : trace_hardirqs_off (ret_from_exception) <...>-1 0D..1 10653us : trace_hardirqs_on (restore_nocheck) <...>-1 0D..1 10654us : mark_held_locks (trace_hardirqs_on) <...>-1 0D..1 10654us : mark_lock (mark_held_locks) <...>-1 0D..1 10655us : save_trace (mark_lock) <...>-1 0D..1 10656us : save_stack_trace (save_trace) <...>-1 0D..1 10658us : print_usage_bug (mark_lock)
i think what happened is that the pagefault happened with irqs disabled, and the entry.S return-to-exception-site irq-flags tracing code mistakenly turned on the irq flag - causing the mismatch and lockdep's confusion.
if it's easy to reproduce it once more, could you apply the patch below? That will add a trace entry about what address faulted and at what EIP. Please also upload vmlinux.bz2 because the EIP will be a raw hex number and i'll have to look it up. (or if it's too big then please disassemble vmlinux via objdump -d vmlinux and upload a ~100 lines portion that is mentioned in the new trace entry next to the do_page_fault trace entry near the end of the latency_trace output)
Ingo
arch/i386/mm/fault.c +1 -0
@@ -337,6 +338,7 @@ fastcall void __kprobes do_page_fault(st/* get the address */ address =read_cr2 (); +trace_special (regs->eip, address, error_code); tsk = current;
Quoted 1 line · Ingo Molnar
if it's easy to reproduce it once more, could you apply the patch below?
please use the updated patch below - it adds more info so that we can see whether irqs were really disabled (from the eflags), and we can see whether it was userspace or kernelspace.
Ingo
arch/i386/mm/fault.c +2 -0
@@ -337,6 +338,8 @@ fastcall void __kprobes do_page_fault(st/* get the address */ address =read_cr2 (); +trace_special (regs->eip, address, error_code); +trace_special (regs->eflags, regs->xss, regs->esp); tsk = current;
Quoted 4 lines · Ingo Molnar
i think what happened is that the pagefault happened with irqs disabled, and the
entry.Sreturn-to-exception-site irq-flags tracing code mistakenly turned on the irq flag - causing the mismatch and lockdep's confusion.
here's the fix for the irqs-off iret irqflags-tracing problem. Does this fix the bug(s) on your box?
Ingo
arch/i386/kernel/entry.S +5 -0
@@ -364,6 +364,8 @@ restore_all: CFI_REMEMBER_STATE je ldt_ss # returning to user-space with LDT SS restore_nocheck: + testl $IF_MASK,EFLAGS(%esp) # interrupts off (exception path) ? + jz restore_nocheck_notrace TRACE_IRQS_ON restore_nocheck_notrace: RESTORE_REGS
@@ -404,7 +406,10 @@ ldt_ss: * and a switch16 pointer on top of the current frame. */ call setup_x86_bogus_stack CFI_ADJUST_CFA_OFFSET -8 # frame has moved + testl $IF_MASK,EFLAGS(%esp) # interrupts off (exception path) ? + jz restore_nocheck_notrace2 TRACE_IRQS_ON +restore_nocheck_notrace2: RESTORE_REGS lss 20+4(%esp), %esp # switch to 16bit stack 1: iret
Quoted 10 lines · Ingo Molnar
Quoted 4 lines · Ingo Molnar
i think what happened is that the pagefault happened with irqs disabled, and the
entry.Sreturn-to-exception-site irq-flags tracing code mistakenly turned on the irq flag - causing the mismatch and lockdep's confusion.here's the fix for the irqs-off iret irqflags-tracing problem. Does this fix the bug(s) on your box?
Yes. Thanks!
Quoted 3 lines
Ingo
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
PATCH 1/1 lock validator: irqflags-trace entry.S fix
Quoted 4 lines · Michal Piotrowski
Quoted 2 lines
here's the fix for the irqs-off iret irqflags-tracing problem. Does this fix the bug(s) on your box?
Yes. Thanks!
great! Here's the cleaned up fix for Andrew:
----------------------------
Subject: lock validator: irqflags-trace entry.S fix
From: Ingo Molnar <[email protected]>
this fixes the irqflags-tracing bug reported (and relentlessly debugged) by Michal Piotrowski: if we took a fault while interrupts were disabled (for example of a vmalloc area) then irqflags-tracing mistakenly assumed that the iret would re-enable interrupts.
--- arch/i386/kernel/entry.S | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
arch/i386/kernel/entry.S +11 -2
@@ -84,6 +84,15 @@ VM_MASK = 0x00020000 #define resume_kernel restore_nocheck #endif +.macro TRACE_IRQS_IRET +#ifdef CONFIG_TRACE_IRQFLAGS + testl $IF_MASK,EFLAGS(%esp) # interrupts off? + jz 1f + TRACE_IRQS_ON +1: +#endif +.endm + #ifdef CONFIG_VM86 #define resume_userspace_sig check_userspace #else
@@ -364,7 +373,7 @@ restore_all: CFI_REMEMBER_STATE je ldt_ss # returning to user-space with LDT SS restore_nocheck: - TRACE_IRQS_ON + TRACE_IRQS_IRET restore_nocheck_notrace: RESTORE_REGS addl $4, %esp
@@ -404,7 +413,7 @@ ldt_ss: * and a switch16 pointer on top of the current frame. */ call setup_x86_bogus_stack CFI_ADJUST_CFA_OFFSET -8 # frame has moved - TRACE_IRQS_ON + TRACE_IRQS_IRET RESTORE_REGS lss 20+4(%esp), %esp # switch to 16bit stack 1: iret
Building 2.6.17-rc5-mm1, I get this:
net/built-in.o: In function `ip_rt_init': (.init.text+0xb04): undefined reference to `__you_cannot_kmalloc_that_much'
This seems to be coming from:
rt_hash_locks = kmalloc(sizeof(spinlock_t) * RT_HASH_LOCK_SZ, GFP_KERNEL);
I have CONFIG_NR_CPUS=32, so RT_HASH_LOCK_SZ ends up as 2048. Also, I have both CONFIG_DEBUG_SPINLOCK=y and CONFIG_PROVE_SPIN_LOCKING=y so spinlock_t is bloated up quite big:
typedef struct {
raw_spinlock_t raw_lock;
#if defined(CONFIG_PREEMPT) && defined(CONFIG_SMP)
unsigned int break_lock;
#endif
#ifdef CONFIG_DEBUG_SPINLOCK
unsigned int magic, owner_cpu;
void *owner;
#endif
#ifdef CONFIG_PROVE_SPIN_LOCKING
struct lockdep_map dep_map;
#endif
} spinlock_t;I only have 8 CPUs in the box, so updating my config from the x86_64 defconfig fixes things for me.
No patch because I don't really know how to fix this properly...
- R.
PATCH 1/1 lock validator: fix RT_HASH_LOCK_SZ
Quoted 4 lines · Roland Dreier
Building 2.6.17-rc5-mm1, I get this:
net/built-in.o: In function `ip_rt_init': (.init.text+0xb04): undefined reference to `__you_cannot_kmalloc_that_much'
could you try the patch below and set NR_CPUS back to 32?
-----------
Subject: lock validator: fix RT_HASH_LOCK_SZ
From: Ingo Molnar <[email protected]>
on lockdep we have a quite big spinlock_t, so keep the size down.
--- net/ipv4/route.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-)
net/ipv4/route.c +14 -9
@@ -212,17 +212,22 @@ struct rt_hash_bucket {/* * Instead of using one spinlock for each rt_hash_bucket, we use a table of spinlocks * The size of this table is a power of two and depends on the number of CPUS. +* (on lockdep we have a quite big spinlock_t, so keep the size down there) */ -#if NR_CPUS >=32 -#define RT_HASH_LOCK_SZ 4096 -#elif NR_CPUS >=16 -#define RT_HASH_LOCK_SZ 2048 -#elif NR_CPUS >=8 -#define RT_HASH_LOCK_SZ 1024 -#elif NR_CPUS >=4 -#define RT_HASH_LOCK_SZ 512 +#ifdef CONFIG_LOCKDEP +# define RT_HASH_LOCK_SZ 256#else -#define RT_HASH_LOCK_SZ 256 +# if NR_CPUS >=32 +# define RT_HASH_LOCK_SZ 4096 +# elif NR_CPUS >=16 +# define RT_HASH_LOCK_SZ 2048 +# elif NR_CPUS >=8 +# define RT_HASH_LOCK_SZ 1024 +# elif NR_CPUS >=4 +# define RT_HASH_LOCK_SZ 512 +# else +# define RT_HASH_LOCK_SZ 256 +# endif #endif static spinlock_t *rt_hash_locks;
Re: [patch, -rc5-mm1] lock validator: fix RT_HASH_LOCK_SZ
Quoted 1 line
on lockdep we have a quite big
spinlock_t, so keep the size down.
Yes, that builds fine.
However the kernel won't boot for me... it oopses early on in save_stack_trace(). I'm attaching a bootlog, plus another try booting with nmi_watchdog=0, plus my config.
Thanks,
Roland
[ 0.000000] Bootdata ok (command line is root=/dev/sda3 ro console=ttyS0,38400 ) * [ 0.000000] Linux version 2.6.17-rc5-mm1 (root@roland-microway-1) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #4 SMP Tue May 30 12:43:27 PDT 2006 * [ 0.000000] BIOS-provided physical RAM map: * [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) * [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) * [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) * [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)***** [ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable) [ 0.000000] DMI 2.3 present. [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000 [ 0.000000] SRAT: Node 2 PXM 2 120000000-1a0000000 [ 0.000000] SRAT: Node 3 PXM 3 1a0000000-220000000 [ 0.000000] SRAT: Node 1 PXM 1 80000000-120000000 [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] Bootmem setup node 1 0000000080000000-0000000120000000 [ 0.000000] Bootmem setup node 2 0000000120000000-00000001a0000000 [ 0.000000] Bootmem setup node 3 00000001a0000000-0000000220000000 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] Processor #2 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] Processor #3 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] Processor #4 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] Processor #5 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] Processor #6 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] Processor #7 15:1 APIC version 16 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x0d] address[0xfeafe000] gsi_base[40]) [ 0.000000] IOAPIC[1]: apic_id 13, version 17, address 0xfeafe000, GSI 40-46 [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfeaff000] gsi_base[47]) [ 0.000000] IOAPIC[2]: apic_id 14, version 17, address 0xfeaff000, GSI 47-53 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) [ 0.000000] Built 4 zonelists [ 0.000000] Kernel command line: root=/dev/sda3 ro console=ttyS0,38400 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 56.029324] Console: colour VGA+ 80x25 [ 57.128874] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 57.152019] ... MAX_LOCKDEP_SUBTYPES: 8 [ 57.164264] ... MAX_LOCK_DEPTH: 30 [ 57.176769] ... MAX_LOCKDEP_KEYS: 2048 [ 57.189794] ... TYPEHASH_SIZE: 1024 [ 57.202817] ... MAX_LOCKDEP_ENTRIES: 8192 [ 57.215842] ... MAX_LOCKDEP_CHAINS: 8192 [ 57.228865] ... CHAINHASH_SIZE: 4096 [ 57.241890] memory used by lock dependency info: 1120 kB [ 57.258026] per task-struct memory footprint: 1440 bytes [ 57.274164] ------------------------ [ 57.284852] | Locking API testsuite: [ 57.295542] ---------------------------------------------------------------------------- [ 57.319722] | spin |wlock |rlock |mutex | wsem | rsem | [ 57.343903] -------------------------------------------------------------------------- [ 57.368088] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 57.393240] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 57.418380] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 57.443526] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 57.468692] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 57.493903] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 57.519043] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 57.544190] double unlock: ok | ok | ok | ok | ok | ok | [ 57.569355] bad unlock order: ok | ok | ok | ok | ok | ok | [ 57.594522] -------------------------------------------------------------------------- [ 57.618703] recursive read-lock: | ok | | ok | [ 57.643348] -------------------------------------------------------------------------- [ 57.667529] non-nested unlock: ok | ok | ok | ok | [ 57.688743] ------------------------------------------------------------ [ 57.709274] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 57.728516] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 57.747747] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 57.766997] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 57.786242] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 57.805466] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 57.824698] hard-safe-A + irqs-on/12: ok | ok | ok | [ 57.843948] soft-safe-A + irqs-on/12: ok | ok | ok | [ 57.863192] hard-safe-A + irqs-on/21: ok | ok | ok | [ 57.882424] soft-safe-A + irqs-on/21: ok | ok | ok | [ 57.901674] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 57.920918] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 57.940142] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 57.959374] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 57.978624] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 57.997869] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 58.017100] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 58.036350] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 58.055593] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 58.074819] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 58.094049] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 58.113300] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 58.132544] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 58.151776] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 58.171026] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 58.190270] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 58.209494] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 58.228726] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 58.247976] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 58.267221] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 58.286451] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 58.305702] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 58.324945] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 58.344171] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 58.363401] hard-irq lock-inversion/123: ok | ok | ok | [ 58.382652] soft-irq lock-inversion/123: ok | ok | ok | [ 58.401897] hard-irq lock-inversion/132: ok | ok | ok | [ 58.421121] soft-irq lock-inversion/132: ok | ok | ok | [ 58.440353] hard-irq lock-inversion/213: ok | ok | ok | [ 58.459603] soft-irq lock-inversion/213: ok | ok | ok | [ 58.478846] hard-irq lock-inversion/231: ok | ok | ok | [ 58.498078] soft-irq lock-inversion/231: ok | ok | ok | [ 58.517328] hard-irq lock-inversion/312: ok | ok | ok | [ 58.536572] soft-irq lock-inversion/312: ok | ok | ok | [ 58.555797] hard-irq lock-inversion/321: ok | ok | ok | [ 58.575028] soft-irq lock-inversion/321: ok | ok | ok | [ 58.594279] hard-irq read-recursion/123: ok | [ 58.609579] soft-irq read-recursion/123: ok | [ 58.624867] hard-irq read-recursion/132: ok | [ 58.640174] soft-irq read-recursion/132: ok | [ 58.655474] hard-irq read-recursion/213: ok | [ 58.670762] soft-irq read-recursion/213: ok | [ 58.686190] hard-irq read-recursion/231: ok | [ 58.701473] soft-irq read-recursion/231: ok | [ 58.716761] hard-irq read-recursion/312: ok | [ 58.732061] soft-irq read-recursion/312: ok | [ 58.747343] hard-irq read-recursion/321: ok | [ 58.762631] soft-irq read-recursion/321: ok | [ 58.777930] ------------------------------------------------------- [ 58.796645] Good, all 210 testcases passed! | [ 58.809668] --------------------------------- [ 58.828152] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 58.857504] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 58.880979] Checking aperture... [ 58.890646] CPU 0: aperture @ 4000000 size 32 MB [ 58.904442] Aperture too small (32 MB) [ 58.920442] No AGP bridge found [ 58.929815] Your BIOS doesn't leave a aperture memory hole [ 58.946212] Please enable the IOMMU option in the BIOS setup [ 58.963128] This costs you 64 MB of RAM [ 59.019026] Mapping aperture over 65536 KB of RAM @ 4000000 [ 59.189225] Memory: 7987980k/8912896k available (2295k kernel code, 400176k reserved, 1237k data, 240k init) [ 59.279159] Calibrating delay using timer specific routine.. 5202.67 BogoMIPS (lpj=2601335) [ 59.304560] Security Framework v1.0.0 initialized [ 59.318618] SELinux: Disabled at boot. [ 59.330083] Capability LSM initialized [ 59.341481] Mount-cache hash table entries: 256 [ 59.355549] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 59.376861] CPU: L2 Cache: 1024K (64 bytes/line) [ 59.390661] CPU 0/0(2) -> Node 0 -> Core 0 [ 59.402918] Freeing SMP alternatives: 24k freed [ 59.437194] Using local APIC timer interrupts. [ 59.488839] result 12500042 [ 59.497183] Detected 12.500 MHz APIC timer. [ 59.511667] lockdep: not fixing up alternatives. [ 59.525490] Booting processor 1/8 APIC 0x1 [ 59.548003] Initializing CPU#1 [ 59.608395] Calibrating delay using timer specific routine.. 5199.26 BogoMIPS (lpj=2599631) [ 59.608402] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 59.608404] CPU: L2 Cache: 1024K (64 bytes/line) [ 59.608407] CPU 1/1(2) -> Node 0 -> Core 1 [ 59.608528] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 59.609404] CPU 1: Syncing TSC to CPU 0. [ 59.609554] CPU 1: synchronized TSC with CPU 0 (last diff 22 cycles, maxerr 944 cycles) [ 59.610418] lockdep: not fixing up alternatives. [ 59.758943] Booting processor 2/8 APIC 0x2 [ 59.781534] Initializing CPU#2 [ 59.841857] Calibrating delay using timer specific routine.. 5199.32 BogoMIPS (lpj=2599663) [ 59.841865] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 59.841867] CPU: L2 Cache: 1024K (64 bytes/line) [ 59.841870] CPU 2/2(2) -> Node 1 -> Core 0 [ 59.841986] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 59.842874] CPU 2: Syncing TSC to CPU 0. [ 59.843019] CPU 2: synchronized TSC with CPU 0 (last diff 155 cycles, maxerr 730 cycles) [ 59.843862] lockdep: not fixing up alternatives. [ 59.992620] Booting processor 3/8 APIC 0x3 [ 60.015131] Initializing CPU#3 [ 60.075319] Calibrating delay using timer specific routine.. 5199.33 BogoMIPS (lpj=2599665) [ 60.075326] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.075329] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.075331] CPU 3/3(2) -> Node 1 -> Core 1 [ 60.075449] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 60.076336] CPU 3: Syncing TSC to CPU 0. [ 60.076482] CPU 3: synchronized TSC with CPU 0 (last diff -166 cycles, maxerr 1004 cycles) [ 60.077496] lockdep: not fixing up alternatives. [ 60.226736] Booting processor 4/8 APIC 0x4 [ 60.249256] Initializing CPU#4 [ 60.309778] Calibrating delay using timer specific routine.. 5199.32 BogoMIPS (lpj=2599663) [ 60.309786] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.309788] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.309791] CPU 4/4(2) -> Node 2 -> Core 0 [ 60.309907] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 60.310793] CPU 4: Syncing TSC to CPU 0. [ 60.310940] CPU 4: synchronized TSC with CPU 0 (last diff 16 cycles, maxerr 1001 cycles) [ 60.311951] lockdep: not fixing up alternatives. [ 60.460683] Booting processor 5/8 APIC 0x5 [ 60.483272] Initializing CPU#5 [ 60.543240] Calibrating delay using timer specific routine.. 5199.32 BogoMIPS (lpj=2599663) [ 60.543248] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.543250] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.543252] CPU 5/5(2) -> Node 2 -> Core 1 [ 60.543366] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 60.544255] CPU 5: Syncing TSC to CPU 0. [ 60.544400] CPU 5: synchronized TSC with CPU 0 (last diff 14 cycles, maxerr 1000 cycles) [ 60.545438] lockdep: not fixing up alternatives. [ 60.694228] Booting processor 6/8 APIC 0x6 [ 60.716743] Initializing CPU#6 [ 60.777700] Calibrating delay using timer specific routine.. 5199.34 BogoMIPS (lpj=2599670) [ 60.777708] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 60.777711] CPU: L2 Cache: 1024K (64 bytes/line) [ 60.777713] CPU 6/6(2) -> Node 3 -> Core 0 [ 60.777871] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 60.778711] CPU 6: Syncing TSC to CPU 0. [ 60.778953] CPU 6: synchronized TSC with CPU 0 (last diff -2 cycles, maxerr 1731 cycles) [ 60.779972] lockdep: not fixing up alternatives. [ 60.928707] Booting processor 7/8 APIC 0x7 [ 60.951227] Initializing CPU#7 [ 61.012159] Calibrating delay using timer specific routine.. 5199.32 BogoMIPS (lpj=2599663) [ 61.012168] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 61.012170] CPU: L2 Cache: 1024K (64 bytes/line) [ 61.012172] CPU 7/7(2) -> Node 3 -> Core 1 [ 61.012326] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 61.013175] CPU 7: Syncing TSC to CPU 0. [ 61.013417] CPU 7: synchronized TSC with CPU 0 (last diff 3 cycles, maxerr 1744 cycles) [ 61.013431] Brought up 8 CPUs [ 61.157095] lockdep: disabled NMI watchdog. [ 61.158090] Uhhuh. NMI received for unknown reason 3d. [ 61.158093] Do you have a strange power saving mode enabled? [ 61.158094] Dazed and confused, but trying to continue [ 61.162927] Uhhuh. NMI received for unknown reason 00. [ 61.162931] Do you have a strange power saving mode enabled? [ 61.162932] Dazed and confused, but trying to continue [ 61.169946] Uhhuh. NMI received for unknown reason 00. [ 61.169950] Do you have a strange power saving mode enabled? [ 61.169951] Dazed and confused, but trying to continue [ 61.176804] Uhhuh. NMI received for unknown reason 00. [ 61.176807] Do you have a strange power saving mode enabled? [ 61.176809] Dazed and confused, but trying to continue [ 61.176827] Uhhuh. NMI received for unknown reason 00. [ 61.176831] Do you have a strange power saving mode enabled? [ 61.176833] Dazed and confused, but trying to continue [ 61.227863] Uhhuh. NMI received for unknown reason 00. [ 61.227866] Do you have a strange power saving mode enabled? [ 61.227868] Dazed and confused, but trying to continue [ 61.240686] Uhhuh. NMI received for unknown reason 00. [ 61.240689] Do you have a strange power saving mode enabled? [ 61.240691] Dazed and confused, but trying to continue [ 61.259831] Uhhuh. NMI received for unknown reason 00. [ 61.259834] Do you have a strange power saving mode enabled? [ 61.259836] Dazed and confused, but trying to continue [ 61.550383] Disabling vsyscall due to use of PM timer [ 61.565483] time.c: Using 3.579545 MHz WALL PM GTOD PM timer. [ 61.582653] time.c: Detected 2600.005 MHz processor. [ 61.767031] migration_cost=368,399 [ 61.781565] NET: Registered protocol family 16 [ 61.794960] ACPI: bus type pci registered [ 61.806947] PCI: Using configuration type 1 [ 61.819557] Unable to handle kernel paging request at 0000000100000007 RIP: [ 61.833350] [<ffffffff8020c82b>] save_stack_trace+0x187/0x234 [ 61.858177] PGD 0 [ 61.864248] Oops: 0000 [1] SMP [ 61.873744] last sysfs file: [ 61.882617] CPU 2 [ 61.888688] Modules linked in: [ 61.897873] Pid: 34, comm: khelper Not tainted 2.6.17-rc5-mm1 #4 [ 61.915825] RIP: 0010:[<ffffffff8020c82b>] [<ffffffff8020c82b>] save_stack_trace+0x187/0x234 [ 61.940837] RSP: 0000:ffff81019b51da48 EFLAGS: 00010046 [ 61.957259] RAX: 0000000000000001 RBX: ffff81019b51dab8 RCX: ffffffff805c85e8 [ 61.978585] RDX: 0000000000000001 RSI: 0000000000000009 RDI: ffff81019b51e000 [ 61.999911] RBP: ffff81019b51dab8 R08: 00000000ffffffff R09: 0000000000000000 [ 62.021238] R10: ffffffffffffffff R11: ffffffff805a4d18 R12: ffffffff807723f8 [ 62.042563] R13: ffff81011a295080 R14: ffff81011a295080 R15: 0000000000000000 [ 62.063890] FS: 0000000000000000(0000) GS:ffff81011a4d9e40(0000) knlGS:0000000000000000 [ 62.088068] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 62.105243] CR2: 0000000100000007 CR3: 0000000000201000 CR4: 00000000000006e0 [ 62.126571] Process khelper (pid: 34, threadinfo ffff81019b51c000, task ffff81011a295080) [ 62.151008] Stack: 0000000000000003 ffff81019b51da58 ffff81019b51e000 ffffffff80248484 [ 62.174617] 0000000000000000 0000000000000001 ffffffff804bc5c8 ffff81019b51dab8 [ 62.198770] 0000000000000000 ffffffff807723f8 [ 62.214001] Call Trace: [ 62.221866] [<ffffffff80248484>] __lockdep_acquire+0xa98/0xad2 [ 62.239612] [<ffffffff80246cab>] save_trace+0x3e/0xe6 [ 62.255020] [<ffffffff80246e43>] add_lock_to_list+0x79/0xa0 [ 62.271988] [<ffffffff8024837d>] __lockdep_acquire+0x991/0xad2 [ 62.289735] [<ffffffff8022bec4>] copy_process+0x1314/0x1816 [ 62.306676] [<ffffffff802488a5>] lockdep_acquire+0x82/0xa3 [ 62.323384] [<ffffffff8043af82>] _spin_lock+0x1c/0x28 [ 62.338794] [<ffffffff8022bec4>] copy_process+0x1314/0x1816 [ 62.355763] [<ffffffff8043b33f>] _spin_unlock_irq+0x28/0x2e [ 62.372729] [<ffffffff8023f3cc>] alloc_pid+0x2b1/0x2d9 [ 62.388399] [<ffffffff8022c4c8>] do_fork+0x102/0x236 [ 62.403525] [<ffffffff8023f35e>] alloc_pid+0x243/0x2d9 [ 62.419170] [<ffffffff80247268>] mark_lock+0x3b/0x4fc [ 62.434580] [<ffffffff80247268>] mark_lock+0x3b/0x4fc [ 62.449993] [<ffffffff8020a51d>] kernel_thread+0x81/0xde [ 62.466180] [<ffffffff8023e38b>] run_workqueue+0x17/0x10f [ 62.482629] [<ffffffff8023df29>] ____call_usermodehelper+0x0/0x10e [ 62.501386] [<ffffffff8020a57a>] child_rip+0x0/0x12 [ 62.516277] [<ffffffff8023ddc5>] __call_usermodehelper+0x32/0x4d [ 62.534543] [<ffffffff8023e42d>] run_workqueue+0xb9/0x10f [ 62.550990] [<ffffffff8023dd93>] __call_usermodehelper+0x0/0x4d [ 62.568996] [<ffffffff8023e539>] worker_thread+0x0/0x128 [ 62.585185] [<ffffffff8023e62e>] worker_thread+0xf5/0x128 [ 62.601635] [<ffffffff802276bf>] default_wake_function+0x0/0xf [ 62.619381] [<ffffffff8023e539>] worker_thread+0x0/0x128 [ 62.635569] [<ffffffff80241cba>] kthread+0xd1/0xfb [ 62.650201] [<ffffffff8023e539>] worker_thread+0x0/0x128 [ 62.666389] [<ffffffff8020a582>] child_rip+0x8/0x12 [ 62.681282] [<ffffffff8043b33f>] _spin_unlock_irq+0x28/0x2e [ 62.698224] [<ffffffff80209bcf>] restore_args+0x0/0x30 [ 62.713896] [<ffffffff80241be9>] kthread+0x0/0xfb [ 62.728267] [<ffffffff8020a57a>] child_rip+0x0/0x12 [ 62.743132] [ 62.747595] [ 62.747595] Code: 4d 8b 50 08 75 1b 41 8b 14 24 49 8b 4c 24 08 49 8d 42 ff 89 [ 62.774758] RIP [<ffffffff8020c82b>] save_stack_trace+0x187/0x234 RSP <ffff81019b51da48> [ 62.799301] CR2: 0000000100000007 [ 0.000000] Bootdata ok (command line is root=/dev/sda3 ro console=ttyS0,38400 nmi_watchdog=0) [ 0.000000] Linux version 2.6.17-rc5-mm1 (root@roland-microway-1) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #4 SMP Tue May 30 12:43:27 PDT 2006 * [ 0.000000] BIOS-provided physical RAM map: * [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) * [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) * [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) * [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)***** [ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable) [ 0.000000] DMI 2.3 present. [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000 [ 0.000000] SRAT: Node 2 PXM 2 120000000-1a0000000 [ 0.000000] SRAT: Node 3 PXM 3 1a0000000-220000000 [ 0.000000] SRAT: Node 1 PXM 1 80000000-120000000 [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] Bootmem setup node 1 0000000080000000-0000000120000000 [ 0.000000] Bootmem setup node 2 0000000120000000-00000001a0000000 [ 0.000000] Bootmem setup node 3 00000001a0000000-0000000220000000 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] Processor #2 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] Processor #3 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] Processor #4 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] Processor #5 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] Processor #6 15:1 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] Processor #7 15:1 APIC version 16 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x0d] address[0xfeafe000] gsi_base[40]) [ 0.000000] IOAPIC[1]: apic_id 13, version 17, address 0xfeafe000, GSI 40-46 [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfeaff000] gsi_base[47]) [ 0.000000] IOAPIC[2]: apic_id 14, version 17, address 0xfeaff000, GSI 47-53 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) [ 0.000000] Built 4 zonelists [ 0.000000] Kernel command line: root=/dev/sda3 ro console=ttyS0,38400 nmi_watchdog=0 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 63.998993] Console: colour VGA+ 80x25 [ 65.106316] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 65.129462] ... MAX_LOCKDEP_SUBTYPES: 8 [ 65.141707] ... MAX_LOCK_DEPTH: 30 [ 65.154212] ... MAX_LOCKDEP_KEYS: 2048 [ 65.167237] ... TYPEHASH_SIZE: 1024 [ 65.180261] ... MAX_LOCKDEP_ENTRIES: 8192 [ 65.193284] ... MAX_LOCKDEP_CHAINS: 8192 [ 65.206308] ... CHAINHASH_SIZE: 4096 [ 65.219332] memory used by lock dependency info: 1120 kB [ 65.235537] per task-struct memory footprint: 1440 bytes [ 65.251659] ------------------------ [ 65.262348] | Locking API testsuite: [ 65.273036] ---------------------------------------------------------------------------- [ 65.297217] | spin |wlock |rlock |mutex | wsem | rsem | [ 65.321397] -------------------------------------------------------------------------- [ 65.345583] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 65.370735] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 65.395874] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 65.421014] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 65.446161] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 65.471326] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 65.496538] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 65.521677] double unlock: ok | ok | ok | ok | ok | ok | [ 65.546825] bad unlock order: ok | ok | ok | ok | ok | ok | [ 65.571990] -------------------------------------------------------------------------- [ 65.596172] recursive read-lock: | ok | | ok | [ 65.620818] -------------------------------------------------------------------------- [ 65.644999] non-nested unlock: ok | ok | ok | ok | [ 65.666213] ------------------------------------------------------------ [ 65.686742] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 65.705985] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 65.725209] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 65.744441] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 65.763692] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 65.782935] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 65.802159] hard-safe-A + irqs-on/12: ok | ok | ok | [ 65.821391] soft-safe-A + irqs-on/12: ok | ok | ok | [ 65.840641] hard-safe-A + irqs-on/21: ok | ok | ok | [ 65.859885] soft-safe-A + irqs-on/21: ok | ok | ok | [ 65.879117] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 65.898368] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 65.917611] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 65.936836] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 65.956067] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 65.975318] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 65.994561] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 66.013792] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 66.033043] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 66.052288] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 66.071512] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 66.090744] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 66.109994] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 66.129237] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 66.148468] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 66.167720] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 66.186963] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 66.206188] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 66.225419] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 66.244670] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 66.263914] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 66.283145] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 66.302396] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 66.321873] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 66.341104] hard-irq lock-inversion/123: ok | ok | ok | [ 66.360355] soft-irq lock-inversion/123: ok | ok | ok | [ 66.379598] hard-irq lock-inversion/132: ok | ok | ok | [ 66.398830] soft-irq lock-inversion/132: ok | ok | ok | [ 66.418081] hard-irq lock-inversion/213: ok | ok | ok | [ 66.437324] soft-irq lock-inversion/213: ok | ok | ok | [ 66.456549] hard-irq lock-inversion/231: ok | ok | ok | [ 66.475780] soft-irq lock-inversion/231: ok | ok | ok | [ 66.495030] hard-irq lock-inversion/312: ok | ok | ok | [ 66.514275] soft-irq lock-inversion/312: ok | ok | ok | [ 66.533506] hard-irq lock-inversion/321: ok | ok | ok | [ 66.552756] soft-irq lock-inversion/321: ok | ok | ok | [ 66.572000] hard-irq read-recursion/123: ok | [ 66.587282] soft-irq read-recursion/123: ok | [ 66.602569] hard-irq read-recursion/132: ok | [ 66.617870] soft-irq read-recursion/132: ok | [ 66.633151] hard-irq read-recursion/213: ok | [ 66.648438] soft-irq read-recursion/213: ok | [ 66.663745] hard-irq read-recursion/231: ok | [ 66.679046] soft-irq read-recursion/231: ok | [ 66.694333] hard-irq read-recursion/312: ok | [ 66.709641] soft-irq read-recursion/312: ok | [ 66.724941] hard-irq read-recursion/321: ok | [ 66.740229] soft-irq read-recursion/321: ok | [ 66.755536] ------------------------------------------------------- [ 66.774269] Good, all 210 testcases passed! | [ 66.787292] --------------------------------- [ 66.805780] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 66.835368] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 66.858851] Checking aperture... [ 66.868500] CPU 0: aperture @ 8016000000 size 32 MB [ 66.883078] Aperture too small (32 MB) [ 66.899307] No AGP bridge found [ 66.908685] Your BIOS doesn't leave a aperture memory hole [ 66.925081] Please enable the IOMMU option in the BIOS setup [ 66.941997] This costs you 64 MB of RAM [ 66.997926] Mapping aperture over 65536 KB of RAM @ 4000000 [ 67.168352] Memory: 7987980k/8912896k available (2295k kernel code, 400176k reserved, 1237k data, 240k init) [ 67.257820] Calibrating delay using timer specific routine.. 5202.67 BogoMIPS (lpj=2601339) [ 67.283222] Security Framework v1.0.0 initialized [ 67.297280] SELinux: Disabled at boot. [ 67.308744] Capability LSM initialized [ 67.320144] Mount-cache hash table entries: 256 [ 67.334212] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 67.355523] CPU: L2 Cache: 1024K (64 bytes/line) [ 67.369324] CPU 0/0(2) -> Node 0 -> Core 0 [ 67.381581] Freeing SMP alternatives: 24k freed [ 67.415858] Using local APIC timer interrupts. [ 67.467501] result 12500031 [ 67.475844] Detected 12.500 MHz APIC timer. [ 67.490346] lockdep: not fixing up alternatives. [ 67.504180] Booting processor 1/8 APIC 0x1 [ 67.526690] Initializing CPU#1 [ 67.587056] Calibrating delay using timer specific routine.. 5199.33 BogoMIPS (lpj=2599668) [ 67.587063] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 67.587065] CPU: L2 Cache: 1024K (64 bytes/line) [ 67.587068] CPU 1/1(2) -> Node 0 -> Core 1 [ 67.587188] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 67.588070] CPU 1: Syncing TSC to CPU 0. [ 67.588218] CPU 1: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 985 cycles) [ 67.589100] lockdep: not fixing up alternatives. [ 67.737528] Booting processor 2/8 APIC 0x2 [ 67.760036] Initializing CPU#2 [ 67.820518] Calibrating delay using timer specific routine.. 5199.25 BogoMIPS (lpj=2599628) [ 67.820525] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 67.820527] CPU: L2 Cache: 1024K (64 bytes/line) [ 67.820530] CPU 2/2(2) -> Node 1 -> Core 0 [ 67.820646] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 67.821530] CPU 2: Syncing TSC to CPU 0. [ 67.821674] CPU 2: synchronized TSC with CPU 0 (last diff 159 cycles, maxerr 732 cycles) [ 67.822534] lockdep: not fixing up alternatives. [ 67.971260] Booting processor 3/8 APIC 0x3 [ 67.993768] Initializing CPU#3 [ 68.053980] Calibrating delay using timer specific routine.. 5199.33 BogoMIPS (lpj=2599665) [ 68.053987] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 68.053989] CPU: L2 Cache: 1024K (64 bytes/line) [ 68.053992] CPU 3/3(2) -> Node 1 -> Core 1 [ 68.054109] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 68.054992] CPU 3: Syncing TSC to CPU 0. [ 68.055138] CPU 3: synchronized TSC with CPU 0 (last diff 17 cycles, maxerr 1019 cycles) [ 68.056166] lockdep: not fixing up alternatives. [ 68.204907] Booting processor 4/8 APIC 0x4 [ 68.227421] Initializing CPU#4 [ 68.287441] Calibrating delay using timer specific routine.. 5199.25 BogoMIPS (lpj=2599628) [ 68.287449] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 68.287451] CPU: L2 Cache: 1024K (64 bytes/line) [ 68.287454] CPU 4/4(2) -> Node 2 -> Core 0 [ 68.287570] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 68.288454] CPU 4: Syncing TSC to CPU 0. [ 68.288599] CPU 4: synchronized TSC with CPU 0 (last diff 156 cycles, maxerr 728 cycles) [ 68.289627] lockdep: not fixing up alternatives. [ 68.438361] Booting processor 5/8 APIC 0x5 [ 68.460866] Initializing CPU#5 [ 68.520903] Calibrating delay using timer specific routine.. 5199.33 BogoMIPS (lpj=2599666) [ 68.520911] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 68.520913] CPU: L2 Cache: 1024K (64 bytes/line) [ 68.520915] CPU 5/5(2) -> Node 2 -> Core 1 [ 68.521030] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 68.521913] CPU 5: Syncing TSC to CPU 0. [ 68.522059] CPU 5: synchronized TSC with CPU 0 (last diff -157 cycles, maxerr 1002 cycles) [ 68.523119] lockdep: not fixing up alternatives. [ 68.672370] Booting processor 6/8 APIC 0x6 [ 68.694888] Initializing CPU#6 [ 68.755363] Calibrating delay using timer specific routine.. 5199.26 BogoMIPS (lpj=2599632) [ 68.755372] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 68.755373] CPU: L2 Cache: 1024K (64 bytes/line) [ 68.755376] CPU 6/6(2) -> Node 3 -> Core 0 [ 68.755505] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 68.756372] CPU 6: Syncing TSC to CPU 0. [ 68.756607] CPU 6: synchronized TSC with CPU 0 (last diff -2 cycles, maxerr 1731 cycles) [ 68.757636] lockdep: not fixing up alternatives. [ 68.906332] Booting processor 7/8 APIC 0x7 [ 68.928851] Initializing CPU#7 [ 68.989822] Calibrating delay using timer specific routine.. 5199.26 BogoMIPS (lpj=2599631) [ 68.989831] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 68.989833] CPU: L2 Cache: 1024K (64 bytes/line) [ 68.989836] CPU 7/7(2) -> Node 3 -> Core 1 [ 68.989963] Dual Core AMD Opteron(tm) Processor 885 stepping 02 [ 68.990839] CPU 7: Syncing TSC to CPU 0. [ 68.991078] CPU 7: synchronized TSC with CPU 0 (last diff 3 cycles, maxerr 1731 cycles) [ 68.991091] Brought up 8 CPUs [ 69.134637] lockdep: disabled NMI watchdog. [ 69.147145] Disabling vsyscall due to use of PM timer [ 69.162245] time.c: Using 3.579545 MHz WALL PM GTOD PM timer. [ 69.179418] time.c: Detected 2600.003 MHz processor. [ 70.126641] migration_cost=394,475 [ 70.141165] NET: Registered protocol family 16 [ 70.154564] ACPI: bus type pci registered [ 70.166550] PCI: Using configuration type 1 [ 70.179152] Unable to handle kernel paging request at 0000000100000007 RIP: [ 70.192949] [<ffffffff8020c82b>] save_stack_trace+0x187/0x234 [ 70.217778] PGD 0 [ 70.223849] Oops: 0000 [1] SMP [ 70.233344] last sysfs file: [ 70.242217] CPU 2 [ 70.248288] Modules linked in: [ 70.257474] Pid: 34, comm: khelper Not tainted 2.6.17-rc5-mm1 #4 [ 70.275425] RIP: 0010:[<ffffffff8020c82b>] [<ffffffff8020c82b>] save_stack_trace+0x187/0x234 [ 70.300435] RSP: 0000:ffff81019b51da48 EFLAGS: 00010046 [ 70.316884] RAX: 0000000000000001 RBX: ffff81019b51dab8 RCX: ffffffff805c86b8 [ 70.338210] RDX: 0000000000000001 RSI: 0000000000000009 RDI: ffff81019b51e000 [ 70.359537] RBP: ffff81019b51dab8 R08: 00000000ffffffff R09: 0000000000000000 [ 70.380862] R10: ffffffffffffffff R11: ffffffff805a4d18 R12: ffffffff807723f8 [ 70.402190] R13: ffff81011a295080 R14: ffff81011a295080 R15: 0000000000000000 [ 70.423514] FS: 0000000000000000(0000) GS:ffff81011a4d9e40(0000) knlGS:0000000000000000 [ 70.447694] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 70.464869] CR2: 0000000100000007 CR3: 0000000000201000 CR4: 00000000000006e0 [ 70.486196] Process khelper (pid: 34, threadinfo ffff81019b51c000, task ffff81011a295080) [ 70.510635] Stack: 0000000000000003 ffff81019b51da58 ffff81019b51e000 ffffffff80248484 [ 70.534243] 0000000000000000 0000000000000001 ffffffff804bc5c8 ffff81019b51dab8 [ 70.558422] 0000000000000000 ffffffff807723f8 [ 70.573652] Call Trace: [ 70.581545] [<ffffffff80248484>] __lockdep_acquire+0xa98/0xad2 [ 70.599289] [<ffffffff80246cab>] save_trace+0x3e/0xe6 [ 70.614698] [<ffffffff80246e43>] add_lock_to_list+0x79/0xa0 [ 70.631666] [<ffffffff8024837d>] __lockdep_acquire+0x991/0xad2 [ 70.649413] [<ffffffff8022bec4>] copy_process+0x1314/0x1816 [ 70.666380] [<ffffffff802488a5>] lockdep_acquire+0x82/0xa3 [ 70.683063] [<ffffffff8043af82>] _spin_lock+0x1c/0x28 [ 70.698471] [<ffffffff8022bec4>] copy_process+0x1314/0x1816 [ 70.715441] [<ffffffff8043b33f>] _spin_unlock_irq+0x28/0x2e [ 70.732407] [<ffffffff8023f3cc>] alloc_pid+0x2b1/0x2d9 [ 70.748052] [<ffffffff8022c4c8>] do_fork+0x102/0x236 [ 70.763201] [<ffffffff8023f35e>] alloc_pid+0x243/0x2d9 [ 70.778874] [<ffffffff80247268>] mark_lock+0x3b/0x4fc [ 70.794284] [<ffffffff80247268>] mark_lock+0x3b/0x4fc [ 70.809670] [<ffffffff8020a51d>] kernel_thread+0x81/0xde [ 70.825859] [<ffffffff8023e38b>] run_workqueue+0x17/0x10f [ 70.842306] [<ffffffff8023df29>] ____call_usermodehelper+0x0/0x10e [ 70.861088] [<ffffffff8020a57a>] child_rip+0x0/0x12 [ 70.875983] [<ffffffff8023ddc5>] __call_usermodehelper+0x32/0x4d [ 70.894246] [<ffffffff8023e42d>] run_workqueue+0xb9/0x10f [ 70.910694] [<ffffffff8023dd93>] __call_usermodehelper+0x0/0x4d [ 70.928701] [<ffffffff8023e539>] worker_thread+0x0/0x128 [ 70.944889] [<ffffffff8023e62e>] worker_thread+0xf5/0x128 [ 70.961314] [<ffffffff802276bf>] default_wake_function+0x0/0xf [ 70.979058] [<ffffffff8023e539>] worker_thread+0x0/0x128 [ 70.995247] [<ffffffff80241cba>] kthread+0xd1/0xfb [ 71.009880] [<ffffffff8023e539>] worker_thread+0x0/0x128 [ 71.026068] [<ffffffff8020a582>] child_rip+0x8/0x12 [ 71.040959] [<ffffffff8043b33f>] _spin_unlock_irq+0x28/0x2e [ 71.057929] [<ffffffff80209bcf>] restore_args+0x0/0x30 [ 71.073599] [<ffffffff80241be9>] kthread+0x0/0xfb [ 71.087970] [<ffffffff8020a57a>] child_rip+0x0/0x12 [ 71.102861] [ 71.107324] [ 71.107324] Code: 4d 8b 50 08 75 1b 41 8b 14 24 49 8b 4c 24 08 49 8d 42 ff 89 [ 71.134383] RIP [<ffffffff8020c82b>] save_stack_trace+0x187/0x234 RSP <ffff81019b51da48> [ 71.158926] CR2: 0000000100000007
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.17-rc5-mm1
# Tue May 30 13:37:32 2006
#CONFIG_X86_64=yCONFIG_64BIT=yCONFIG_X86=yCONFIG_SEMAPHORE_SLEEPERS=yCONFIG_MMU=yCONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=yCONFIG_EARLY_PRINTK=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=y
# CONFIG_SWAP_PREFETCH is not setCONFIG_SYSVIPC=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not setCONFIG_SYSCTL=y
# CONFIG_UTS_NS is not setCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not setCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_CPUSETS=y
# CONFIG_RELAY is not setCONFIG_INITRAMFS_SOURCE=""CONFIG_KLIBC_ERRLIST=yCONFIG_KLIBC_ZLIB=yCONFIG_UID16=yCONFIG_VM86=yCONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not setCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_RT_MUTEXES=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_KMOD=yCONFIG_STOP_MACHINE=y
#
# Block layer
#CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not setCONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not setCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_MICROCODE=mCONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_MTRR=yCONFIG_SMP=y
# CONFIG_SCHED_SMT is not setCONFIG_SCHED_MC=yCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not setCONFIG_NUMA=yCONFIG_K8_NUMA=yCONFIG_NODES_SHIFT=6CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not setCONFIG_ARCH_DISCONTIGMEM_ENABLE=yCONFIG_ARCH_DISCONTIGMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not setCONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_DISCONTIGMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not setCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=y
# CONFIG_UNALIGNED_ZONE_BOUNDARIES is not set
# CONFIG_ADAPTIVE_READAHEAD is not setCONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=yCONFIG_OUT_OF_LINE_PFN_TO_PAGE=yCONFIG_NR_CPUS=32
# CONFIG_HOTPLUG_CPU is not setCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not setCONFIG_SWIOTLB=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x200000CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000
# CONFIG_REORDER is not setCONFIG_K8_NB=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_ISA_DMA_API=yCONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=mCONFIG_ACPI_HOTKEY=mCONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_THERMAL=mCONFIG_ACPI_NUMA=yCONFIG_ACPI_ASUS=m
# CONFIG_ACPI_ATLAS is not setCONFIG_ACPI_IBM=m
# CONFIG_ACPI_IBM_DOCK is not set CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_SONY is not set CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#CONFIG_X86_POWERNOW_K8=mCONFIG_X86_POWERNOW_K8_ACPI=yCONFIG_X86_SPEEDSTEP_CENTRINO=mCONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=yCONFIG_X86_ACPI_CPUFREQ=m
#
# shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#CONFIG_HOTPLUG_PCI=mCONFIG_HOTPLUG_PCI_FAKE=mCONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=mCONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not setCONFIG_COMPAT=yCONFIG_SYSVIPC_COMPAT=y
#
# Networking
#CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not setCONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=mCONFIG_NET_KEY=mCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not setCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_TCP_CONG_ADVANCED=y
#
# TCP congestion control
#CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not setCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=m
#
# IP: Virtual Server Configuration
#CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IPV6=mCONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not setCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=mCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not setCONFIG_IPV6_TUNNEL=mCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_CT_ACCT=yCONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_SECMARK is not setCONFIG_IP_NF_CONNTRACK_EVENTS=yCONFIG_IP_NF_CONNTRACK_NETLINK=mCONFIG_IP_NF_CT_PROTO_SCTP=mCONFIG_IP_NF_FTP=mCONFIG_IP_NF_IRC=mCONFIG_IP_NF_NETBIOS_NS=mCONFIG_IP_NF_TFTP=mCONFIG_IP_NF_AMANDA=mCONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_H323 is not setCONFIG_IP_NF_QUEUE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#CONFIG_IP6_NF_QUEUE=m
#
# DCCP Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2 is not setCONFIG_IP_DCCP_CCID3=mCONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not setCONFIG_VLAN_8021Q=y
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not setCONFIG_NETROM=mCONFIG_ROSE=m
#
# AX.25 network device drivers
#CONFIG_MKISS=mCONFIG_6PACK=mCONFIG_BPQETHER=mCONFIG_BAYCOM_SER_FDX=mCONFIG_BAYCOM_SER_HDX=mCONFIG_YAM=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=65536CONFIG_BLK_DEV_INITRD=yCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=mCONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not setCONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not setCONFIG_BLK_DEV_AMD74XX=m
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not setCONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=y
# CONFIG_SCSI_TGT is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_DOMAIN_ATTRS is not set
#
# SCSI low-level drivers
#CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not setCONFIG_SCSI_SATA=yCONFIG_SCSI_SATA_AHCI=m
# CONFIG_SCSI_PATA_ALI is not set
# CONFIG_SCSI_PATA_AMD is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_PATA_TRIFLEX is not set
# CONFIG_SCSI_PATA_MPIIX is not set
# CONFIG_SCSI_PATA_OLDPIIX is not setCONFIG_SCSI_ATA_PIIX=m
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_PATA_NETCELL is not setCONFIG_SCSI_SATA_NV=y
# CONFIG_SCSI_PATA_OPTI is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_PATA_PDC2027X is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_PATA_SIL680 is not set
# CONFIG_SCSI_PATA_SIS is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_PATA_VIA is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not setCONFIG_SCSI_SRP=m
#
# Multi-device support (RAID and LVM)
#CONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not setCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=mCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not setCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_EXT_ADAPTEC_DMA64=yCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=yCONFIG_I2O_BUS=mCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=m
#
# Network device support
#CONFIG_NETDEVICES=yCONFIG_DUMMY=mCONFIG_BONDING=m
# CONFIG_EQUALIZER is not setCONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#CONFIG_PHYLIB=m
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=mCONFIG_DAVICOM_PHY=mCONFIG_QSEMI_PHY=mCONFIG_LXT_PHY=mCONFIG_CICADA_PHY=m
# CONFIG_SMSC_PHY is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=mCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=mCONFIG_CASSINI=mCONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=mCONFIG_TYPHOON=m
#
# Tulip family network device support
#CONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not setCONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=mCONFIG_ULI526X=mCONFIG_HP100=mCONFIG_NET_PCI=yCONFIG_PCNET32=mCONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not setCONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not setCONFIG_B44=mCONFIG_FORCEDETH=m
# CONFIG_DGRS is not setCONFIG_EEPRO100=mCONFIG_E100=mCONFIG_FEALNX=mCONFIG_NATSEMI=mCONFIG_NE2K_PCI=mCONFIG_8139CP=mCONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not setCONFIG_8139TOO_TUNE_TWISTER=yCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_SIS900=mCONFIG_EPIC100=mCONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not setCONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not setCONFIG_DL2K=mCONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not setCONFIG_NS83820=mCONFIG_HAMACHI=mCONFIG_YELLOWFIN=mCONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
# CONFIG_R8169_VLAN is not setCONFIG_SIS190=mCONFIG_SKGE=m
# CONFIG_SKY2 is not setCONFIG_SK98LIN=mCONFIG_VIA_VELOCITY=mCONFIG_TIGON3=mCONFIG_BNX2=m
#
# Ethernet (10000 Mbit)
#CONFIG_CHELSIO_T1=mCONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not setCONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#CONFIG_WAN=yCONFIG_DSCC4=mCONFIG_DSCC4_PCISYNC=yCONFIG_DSCC4_PCI_RST=yCONFIG_LANMEDIA=mCONFIG_HDLC=mCONFIG_HDLC_RAW=yCONFIG_HDLC_RAW_ETH=yCONFIG_HDLC_CISCO=yCONFIG_HDLC_FR=yCONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#CONFIG_PCI200SYN=mCONFIG_WANXL=mCONFIG_PC300=mCONFIG_PC300_MLPPP=yCONFIG_FARSYNC=mCONFIG_DLCI=mCONFIG_DLCI_COUNT=24CONFIG_DLCI_MAX=8CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not setCONFIG_FDDI=yCONFIG_DEFXX=mCONFIG_SKFP=mCONFIG_HIPPI=yCONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not setCONFIG_PPP=mCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=mCONFIG_PPPOE=mCONFIG_SLIP=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not setCONFIG_NET_FC=yCONFIG_SHAPER=mCONFIG_NETCONSOLE=mCONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_TSDEV=mCONFIG_INPUT_TSDEV_SCREEN_X=240CONFIG_INPUT_TSDEV_SCREEN_Y=320CONFIG_INPUT_EVDEV=mCONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=mCONFIG_KEYBOARD_LKKBD=mCONFIG_KEYBOARD_XTKBD=mCONFIG_KEYBOARD_NEWTON=mCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_VSXXXAA=mCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=mCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=mCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=mCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=mCONFIG_JOYSTICK_MAGELLAN=mCONFIG_JOYSTICK_SPACEORB=mCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=mCONFIG_JOYSTICK_TWIDJOY=mCONFIG_JOYSTICK_JOYDUMP=mCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_GUNZE=mCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_MTOUCH=mCONFIG_TOUCHSCREEN_MK712=mCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=mCONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_SC520_WDT=mCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=mCONFIG_IBMASR=mCONFIG_WAFER_WDT=mCONFIG_I6300ESB_WDT=mCONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not setCONFIG_SC1200_WDT=mCONFIG_60XX_WDT=mCONFIG_SBC8360_WDT=mCONFIG_CPU5_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=mCONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=m
# CONFIG_HW_RANDOM is not setCONFIG_NVRAM=mCONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#CONFIG_AGP=yCONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not setCONFIG_DRM=m
# CONFIG_DRM_TDFX is not setCONFIG_DRM_R128=mCONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not setCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not setCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not setCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_OCORES is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not setCONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_CX88 is not set
#
# Encoders and Decoders
#
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_CX25840 is not set
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
#
# V4L USB devices
#
# CONFIG_USB_QUICKCAM_MESSENGER is not set
#
# Radio Adapters
#
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not setCONFIG_FB=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=yCONFIG_FB_CIRRUS=mCONFIG_FB_PM2=mCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=mCONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not setCONFIG_FB_VGA16=mCONFIG_FB_VESA=yCONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not setCONFIG_FB_S1D13XXX=mCONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_INTEL is not setCONFIG_FB_MATROX=mCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=mCONFIG_FB_MATROX_MAVEN=mCONFIG_FB_MATROX_MULTIHEAD=yCONFIG_FB_RADEON=mCONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not setCONFIG_FB_ATY128=mCONFIG_FB_ATY=mCONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not setCONFIG_FB_ATY_GX=yCONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not setCONFIG_FB_SIS=mCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_NEOMAGIC=mCONFIG_FB_KYRO=mCONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not setCONFIG_FB_VOODOO1=mCONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
# CONFIG_FB_GEODE is not setCONFIG_FB_VIRTUAL=m
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_VIDEO_SELECT=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not setCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_SPLIT_ISO=yCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set CONFIG_USB_STORAGE_ALAUDA=y # CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#CONFIG_USB_HID=mCONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not setCONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#CONFIG_USB_KBD=mCONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not setCONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#CONFIG_USB_SERIAL=mCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRPRIME=mCONFIG_USB_SERIAL_ANYDATA=m
# CONFIG_USB_SERIAL_ARK3116 is not setCONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not setCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP2101=mCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not setCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not setCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_NAVMAN is not setCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_HP4X=mCONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not setCONFIG_USB_SERIAL_TI=mCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_OMNINET=mCONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#CONFIG_INFINIBAND=mCONFIG_INFINIBAND_USER_MAD=mCONFIG_INFINIBAND_USER_ACCESS=mCONFIG_INFINIBAND_ADDR_TRANS=yCONFIG_INFINIBAND_MTHCA=mCONFIG_INFINIBAND_MTHCA_DEBUG=yCONFIG_IPATH_CORE=mCONFIG_INFINIBAND_IPATH=mCONFIG_INFINIBAND_IPOIB=mCONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not setCONFIG_INFINIBAND_SRP=m
# CONFIG_INFINIBAND_ISER is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Firmware Drivers
#CONFIG_EDD=mCONFIG_DELL_RBU=mCONFIG_DCDBAS=m
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not setCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not setCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not setCONFIG_OCFS2_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QFMT_V1=mCONFIG_QFMT_V2=mCONFIG_QUOTACTL=yCONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not setCONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=mCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not setCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=yCONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not setCONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not setCONFIG_HFS_FS=mCONFIG_HFSPLUS_FS=mCONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not setCONFIG_BFS_FS=mCONFIG_EFS_FS=mCONFIG_CRAMFS=yCONFIG_VXFS_FS=mCONFIG_HPFS_FS=mCONFIG_QNX4FS_FS=mCONFIG_SYSV_FS=mCONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#CONFIG_NFS_FS=mCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=yCONFIG_NFS_DIRECTIO=yCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_NFSD_TCP=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_RPCSEC_GSS_KRB5=mCONFIG_RPCSEC_GSS_SPKM3=mCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not setCONFIG_NCP_FS=mCONFIG_NCPFS_PACKET_SIGNING=yCONFIG_NCPFS_IOCTL_LOCKING=yCONFIG_NCPFS_STRONG=yCONFIG_NCPFS_NFS_NS=yCONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not setCONFIG_NCPFS_NLS=yCONFIG_NCPFS_EXTRAS=yCONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not setCONFIG_AFS_FS=mCONFIG_RXRPC=mCONFIG_9P_FS=m
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#CONFIG_PROFILING=yCONFIG_OPROFILE=m
# CONFIG_KPROBES is not set
#
# Kernel hacking
#CONFIG_PRINTK_TIME=yCONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_SHIRQ=yCONFIG_DEBUG_KERNEL=yCONFIG_LOG_BUF_SHIFT=16CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not setCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_MUTEX_ALLOC=yCONFIG_DEBUG_MUTEX_DEADLOCKS=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_PROVE_SPIN_LOCKING=yCONFIG_PROVE_RW_LOCKING=yCONFIG_PROVE_MUTEX_LOCKING=yCONFIG_PROVE_RWSEM_LOCKING=yCONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not setCONFIG_FRAME_POINTER=y
# CONFIG_UNWIND_INFO is not setCONFIG_FORCED_INLINING=y
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not setCONFIG_PROFILE_LIKELY=y
# CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set CONFIG_SECURITY_CAPABILITIES=y CONFIG_SECURITY_ROOTPLUG=m CONFIG_SECURITY_SECLVL=mCONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_WP512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_X86_64=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_CRC32C=mCONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
#
# Library routines
#CONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC32=yCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_PLIST=y
Re: [patch, -rc5-mm1] lock validator: fix RT_HASH_LOCK_SZ
Quoted 7 lines · Roland Dreier
Quoted 1 line
on lockdep we have a quite big
spinlock_t, so keep the size down.Yes, that builds fine.
However the kernel won't boot for me... it oopses early on in
save_stack_trace(). I'm attaching a bootlog, plus another try booting with nmi_watchdog=0, plus my config.
there's some bad interaction between the new dwarf2 unwind info stackframe walker code in mm1 and lockdep's stacktrace code on x86_64. I'm investigating this currently, meanwhile you can try the quick hack below.
Ingo
arch/x86_64/kernel/stacktrace.c +2 -1
@@ -127,7 +127,8 @@ save_context_stack(struct stack_trace *t skip--;if (trace->nr_entries >= trace->max_entries)break ; -if (!addr) +#warning fixme +// if (!addr) return 0 ;/* * Stack frames must go forwards (otherwise a loop could
Re: [patch, -rc5-mm1] lock validator: fix RT_HASH_LOCK_SZ
Thanks, that boots.
During boot I see this, apparently while mounting NFS filesystems:
[ 83.114812] ====================================
[ 83.133079] [ BUG: possible deadlock detected! ]
[ 83.146881] ------------------------------------
[ 83.160683] mount/3531 is trying to acquire lock:
[ 83.174745] (&inode->i_mutex){--..}, at: [<ffffffff804396df>] mutex_lock+0x22/0x27
[ 83.197835]
[ 83.197836] but task is already holding lock:
[ 83.215295] (&inode->i_mutex){--..}, at: [<ffffffff804396df>] mutex_lock+0x22/0x27
[ 83.238386]
[ 83.238387] which could potentially lead to deadlocks!
[ 83.258207]
[ 83.258207] other info that might help us debug this:
[ 83.277769] 2 locks held by mount/3531:
[ 83.289235] #0: (&s->s_umount#16){--..}, at: [<ffffffff8028c0b3>] sget+0x1a0/0x407
[ 83.312612] #1: (&inode->i_mutex){--..}, at: [<ffffffff804396df>] mutex_lock+0x22/0x27
[ 83.337025]
[ 83.337026] stack backtrace:
[ 83.350101]
[ 83.350101] Call Trace:
[ 83.361890] [<ffffffff80247b4e>] __lockdep_acquire+0x18a/0xad2
[ 83.379629] [<ffffffff804396df>] mutex_lock+0x22/0x27
[ 83.395038] [<ffffffff8024887d>] lockdep_acquire+0x82/0xa3
[ 83.411748] [<ffffffff80439450>] __mutex_lock_slowpath+0xfd/0x36a
[ 83.430273] [<ffffffff804396df>] mutex_lock+0x22/0x27
[ 83.445703] [<ffffffff880ce635>] :sunrpc:rpc_populate+0x43/0x141
[ 83.463934] [<ffffffff880cedb8>] :sunrpc:rpc_mkdir+0xb6/0x172
[ 83.481383] [<ffffffff802a1862>] mntput_no_expire+0x1b/0xb9
[ 83.498348] [<ffffffff802a989c>] simple_pin_fs+0xc3/0xd3
[ 83.514548] [<ffffffff880bf8c1>] :sunrpc:rpc_new_client+0x226/0x348
[ 83.533592] [<ffffffff880c06e0>] :sunrpc:rpc_create_client+0xc/0x3e
[ 83.552644] [<ffffffff88105e0c>] :nfs:nfs_get_sb+0x559/0x6e8
[ 83.569853] [<ffffffff8028b827>] vfs_kern_mount+0x8b/0x196
[ 83.586560] [<ffffffff8028b980>] do_kern_mount+0x3c/0x57
[ 83.602724] [<ffffffff802a3596>] do_mount+0x7dd/0x851
[ 83.618108] [<ffffffff80247240>] mark_lock+0x3b/0x4fc
[ 83.633520] [<ffffffff80262a2a>] get_page_from_freelist+0x34e/0x4cc
[ 83.652560] [<ffffffff802479a0>] trace_hardirqs_on+0x165/0x189
[ 83.670281] [<ffffffff80262a99>] get_page_from_freelist+0x3bd/0x4cc
[ 83.689324] [<ffffffff8043b461>] _spin_unlock_irqrestore+0x3f/0x47
[ 83.708109] [<ffffffff80262c2a>] __alloc_pages+0x82/0x33d
[ 83.724558] [<ffffffff802787ef>] alloc_pages_current+0xa0/0xa9
[ 83.742301] [<ffffffff803361fc>] _raw_spin_lock+0xc7/0x15d
[ 83.759012] [<ffffffff802a36a7>] sys_mount+0x9d/0xe9
[ 83.774160] [<ffffffff8043ab11>] trace_hardirqs_on_thunk+0x35/0x37
[ 83.792919] [<ffffffff80209652>] system_call+0x7e/0x83- R.
Re: [patch, -rc5-mm1] lock validator: fix RT_HASH_LOCK_SZ
Quoted 3 lines · Roland Dreier
Thanks, that boots.
During boot I see this, apparently while mounting NFS filesystems:
do you have KALLSYMS_ALL enabled? This looks like a thing we already fixed as well... but it also looks a bit odd ..
Re: [patch, -rc5-mm1] lock validator: fix RT_HASH_LOCK_SZ
Arjan> do you have KALLSYMS_ALL enabled? This looks like a thing Arjan> we already fixed as well... but it also looks a bit odd ..
Nope, sorry. Will rebuild and resend.
- R.
Re: [patch, -rc5-mm1] lock validator: fix RT_HASH_LOCK_SZ
In reply to Arjan van de VenHere it is with KALLSYMS_ALL:
[ 80.587694] ====================================
[ 80.605928] [ BUG: possible deadlock detected! ]
[ 80.619729] ------------------------------------
[ 80.633532] mount/3534 is trying to acquire lock:
[ 80.647593] (&inode->i_mutex){--..}, at: [<ffffffff804396af>] mutex_lock+0x22/0x27
[ 80.670683]
[ 80.670684] but task is already holding lock:
[ 80.688170] (&inode->i_mutex){--..}, at: [<ffffffff804396af>] mutex_lock+0x22/0x27
[ 80.711260]
[ 80.711261] which could potentially lead to deadlocks!
[ 80.731083]
[ 80.731083] other info that might help us debug this:
[ 80.750618] 2 locks held by mount/3534:
[ 80.762085] #0: (&s->s_umount#16){--..}, at: [<ffffffff8028c07b>] sget+0x1a0/0x407
[ 80.785513] #1: (&inode->i_mutex){--..}, at: [<ffffffff804396af>] mutex_lock+0x22/0x27
[ 80.809952]
[ 80.809952] stack backtrace:
[ 80.823003]
[ 80.823003] Call Trace:
[ 80.834790] [<ffffffff80247b4e>] __lockdep_acquire+0x18a/0xad2
[ 80.852503] [<ffffffff804396af>] mutex_lock+0x22/0x27
[ 80.867887] [<ffffffff8024887d>] lockdep_acquire+0x82/0xa3
[ 80.884596] [<ffffffff80439420>] __mutex_lock_slowpath+0xfd/0x36a
[ 80.903095] [<ffffffff804396af>] mutex_lock+0x22/0x27
[ 80.918499] [<ffffffff880ce635>] :sunrpc:rpc_populate+0x43/0x141
[ 80.936759] [<ffffffff880cedb8>] :sunrpc:rpc_mkdir+0xb6/0x172
[ 80.954206] [<ffffffff802a182a>] mntput_no_expire+0x1b/0xb9
[ 80.971173] [<ffffffff802a9864>] simple_pin_fs+0xc3/0xd3
[ 80.987371] [<ffffffff880bf8c1>] :sunrpc:rpc_new_client+0x226/0x348
[ 81.006390] [<ffffffff880c06e0>] :sunrpc:rpc_create_client+0xc/0x3e
[ 81.025415] [<ffffffff88105e0c>] :nfs:nfs_get_sb+0x559/0x6e8
[ 81.042598] [<ffffffff8028b7ef>] vfs_kern_mount+0x8b/0x196
[ 81.059305] [<ffffffff8028b948>] do_kern_mount+0x3c/0x57
[ 81.075495] [<ffffffff802a355e>] do_mount+0x7dd/0x851
[ 81.090906] [<ffffffff80247240>] mark_lock+0x3b/0x4fc
[ 81.106289] [<ffffffff802629f2>] get_page_from_freelist+0x34e/0x4cc
[ 81.125331] [<ffffffff802479a0>] trace_hardirqs_on+0x165/0x189
[ 81.143050] [<ffffffff80262a61>] get_page_from_freelist+0x3bd/0x4cc
[ 81.162094] [<ffffffff8043b431>] _spin_unlock_irqrestore+0x3f/0x47
[ 81.180880] [<ffffffff80262bf2>] __alloc_pages+0x82/0x33d
[ 81.197332] [<ffffffff802787b7>] alloc_pages_current+0xa0/0xa9
[ 81.215074] [<ffffffff803361cc>] _raw_spin_lock+0xc7/0x15d
[ 81.231781] [<ffffffff802a366f>] sys_mount+0x9d/0xe9
[ 81.246905] [<ffffffff8043aae1>] trace_hardirqs_on_thunk+0x35/0x37
[ 81.265690] [<ffffffff80209652>] system_call+0x7e/0x83PATCH 1/1 Lockdep annotate rpc_populate for child-relationship of its mutex
Quoted 1 line · Roland Dreier
Here it is with
KALLSYMS_ALL:
ok this ought to do it
rpc_populate is creating a child inode in a directory, and the parent already has it's mutex locked. Similar to the VFS code this needs I_MUTEX_CHILD nesting annotation
--- net/sunrpc/rpc_pipe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/sunrpc/rpc_pipe.c +1 -1
@@ -557,7 +557,7 @@ rpc_populate(struct dentry *parent,struct dentry *dentry;int mode, i; -mutex_lock (&dir->i_mutex); +mutex_lock_nested (&dir->i_mutex,I_MUTEX_CHILD );for (i = start; i < eof; i++) { dentry =d_alloc_name (parent, files[i].name);if (!dentry)
PATCH 1/1 lock validator -V2
In reply to Arjan van de Veni've uploaded lock validator -V2, a rollup of all current fixes (against -rc5-mm1) to:
http://redhat.com/~mingo/lockdep-patches/lockdep-combo-2.6.17-rc5-mm1.patch
(Andrew got all these fixes as individual patches already)
Ingo
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
...
Runtime locking validation.
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {hardirq-on-W} -> {in-hardirq-W} usage. events/0/4 [HC1[1]:SC0[0]:HE0:SE1] takes:
(&list->lock){+...}, at: [<c0247689>] skb_dequeue+0x12/0x43
{hardirq-on-W} state was registered at:
[<c012d2a1>] lockdep_acquire+0x56/0x6f [<c029595b>] _spin_lock_bh+0x1c/0x29 [<c02922e0>] unix_stream_connect+0x2d8/0x3a7 [<c0243fb4>] sys_connect+0x54/0x71 [<c0244c5c>] sys_socketcall+0x6f/0x166 [<c0295afd>] sysenter_past_esp+0x56/0x8d irq event stamp: 1886 hardirqs last enabled at (1885): [<c0295a2b>] _spin_unlock_irqrestore+0x35/0x3b hardirqs last disabled at (1886): [<c01032fb>] common_interrupt+0x1b/0x2c softirqs last enabled at (0): [<c0114af0>] copy_process+0x265/0x11dc softirqs last disabled at (0): [<00000000>] init+0x3feffde0/0x1da
other info that might help us debug this:
no locks held by events/0/4.
stack backtrace: [<c0103810>] show_trace_log_lvl+0x4b/0xf4 [<c0103e11>] show_trace+0xd/0x10 [<c0103e58>] dump_stack+0x19/0x1b [<c012b8be>] print_usage_bug+0x1a4/0x1ae [<c012c3c6>] mark_lock+0x8a/0x411 [<c012cc55>] __lockdep_acquire+0x302/0x8f8 [<c012d2a1>] lockdep_acquire+0x56/0x6f [<c0295906>] _spin_lock_irqsave+0x20/0x2f [<c0247689>] skb_dequeue+0x12/0x43 [<e0bdb7ac>] hpsb_bus_reset+0x55/0xa2 [ieee1394] [<e0853e72>] ohci_irq_handler+0x322/0x6c9 [ohci1394] [<c0138d8c>] handle_IRQ_event+0x20/0x50 [<c0139d38>] handle_level_irq+0x71/0xb9 [<c0104ded>] do_IRQ+0x81/0xa8 [<c0103305>] common_interrupt+0x25/0x2c
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0120e085ca]
.config and dmesg attached.
regards
~~
laurent
Linux version 2.6.17-rc5-mm1 ([email protected]) (gcc version 4.1.1 20060330 (prerelease)) #11 Tue May 30 21:04:23 CEST 2006 BIOS-provided physical RAM map:
sanitize start
sanitize endcopy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1copy_e820_map() type is E820_RAMadd_memory_region(0000000000000000, 000000000009fc00, 1)copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2add_memory_region(000000000009fc00, 0000000000000400, 2)copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2add_memory_region(00000000000f0000, 0000000000010000, 2)copy_e820_map() start: 0000000000100000 size: 000000001feec000 end: 000000001ffec000 type: 1copy_e820_map() type is E820_RAMadd_memory_region(0000000000100000, 000000001feec000, 1)copy_e820_map() start: 000000001ffec000 size: 0000000000003000 end: 000000001ffef000 type: 3add_memory_region(000000001ffec000, 0000000000003000, 3)copy_e820_map() start: 000000001ffef000 size: 0000000000010000 end: 000000001ffff000 type: 2add_memory_region(000000001ffef000, 0000000000010000, 2)copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4add_memory_region(000000001ffff000, 0000000000001000, 4)copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2add_memory_region(00000000ffff0000, 0000000000010000, 2)
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131052
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 126956 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6a80
ACPI: RSDT (v001 ASUS A7V133-C 0x30303031 MSFT 0x31313031) @ 0x1ffec000
ACPI: FADT (v001 ASUS A7V133-C 0x30303031 MSFT 0x31313031) @ 0x1ffec080
ACPI: BOOT (v001 ASUS A7V133-C 0x30303031 MSFT 0x31313031) @ 0x1ffec040
ACPI: DSDT (v001 ASUS A7V133-C 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
Detected 1410.215 MHz processor.
Built 1 zonelists
Kernel command line: root=/dev/vglinux1/lvroot video=vesafb:ywrap,mtrr splash=silent resume=/dev/hdb6 [email protected]/,@192.168.0.1/00:0E:9B:91:ED:72 vga=791 init 1
netconsole: local port 6665
netconsole: local IP 192.163.0.3
netconsole: interface eth0
netconsole: remote port 6666
netconsole: remote IP 192.168.0.1
netconsole: remote ethernet address 00:0e:9b:91:ed:72
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0140d000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c03ce000 soft=c03cd000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBTYPES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... TYPEHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 8192 ... CHAINHASH_SIZE: 4096
memory used by lock dependency info: 696 kB
per task-struct memory footprint: 1080 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
--------------------------------------------------------------------------
non-nested unlock: ok | ok | ok | ok |
------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |-------------------------------------------------------
Good, all 210 testcases passed! |
---------------------------------
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514588k/524208k available (1626k kernel code, 9108k reserved, 650k data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2824.31 BogoMIPS (lpj=5648623)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(TM) XP 1600+ stepping 02
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 0k freed
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0005) - 356 Objects with 38 Devices 115 Methods 24 Regions
ACPI Namespace successfully loaded at root c0524050
ACPI: setting ELCR to 0200 (from 0c20)
evxfevnt-0089 [02] enable : Transition to ACPI mode successful
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 230k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060310
evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:....................................................... Initialized 23/24 Regions 2/2 Fields 19/19 Buffers 11/14 Packages (365 nodes)
Executing all Device _STA and_INI methods:.........................................
41 Devices found - executed 0 _STA, 0 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region e200-e27f claimed by vt82c686 HW-mon
PCI quirk: region e800-e80f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: c6000000-c7efffff
PREFETCH window: c7f00000-cfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 8, 1376256 bytes)
TCP bind hash table entries: 8192 (order: 7, 720896 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x3a set to 0x1
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
vesafb: framebuffer at 0xc8000000, mapped to 0xe0880000, using 3072k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0eb9
vesafb: pmi: set display start = c00c0ef2, set palette = c00c0f68
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 16 throttling states)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL-8029 found at 0xa400, IRQ 10, 00:40:95:46:6E:2D.
netconsole: device eth0 not up yet, forcing it
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
netconsole: network logging started
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI: (supports S0<6>Time: tsc clocksource has been installed.
S1 S3 S4 S5)
Time: acpi_pm clocksource has been installed.
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 176k freed
Write protecting the kernel read-only data: 301k
input: AT Translated Set 2 keyboard as /class/input/input0VP_IDE: IDE controller at PCI slot 0000:00:04.1
ACPI (acpi_bus-0192): Device `IDE0]is not power manageable [20060310]VP_IDE: chipset revision 6VP_IDE: not 100% native mode: will probe irqs laterVP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMAProbing IDE interface ide0...
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
hda: ST340016A, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 >
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4165B, ATAPI CD/DVD-ROM drive
hdd: CD-950E/AKU, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [email protected]
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI (acpi_bus-0192): Device `USB0]is not power manageable [20060310]
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5uhci_hcd 0000:00:04.2: UHCI Host Controlleruhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1uhci_hcd 0000:00:04.2: irq 5, io base 0x0000d400
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.17-rc5-mm1 uhci_hcd
usb usb1: SerialNumber: 0000:00:04.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI (acpi_bus-0192): Device `USB1]is not power manageable [20060310]
ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5uhci_hcd 0000:00:04.3: UHCI Host Controlleruhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2uhci_hcd 0000:00:04.3: irq 5, io base 0x0000d000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.17-rc5-mm1 uhci_hcd
usb usb2: SerialNumber: 0000:00:04.3
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using uhci_hcd and address 2
usb 1-2: new device found, idVendor=044f, idProduct=b303
usb 1-2: new device strings: Mfr=4, Product=30, SerialNumber=0
usb 1-2: Product: FireStorm Dual Analog 2
usb 1-2: Manufacturer: THRUSTMASTER
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[c5800000-c58007ff] Max Packet=[2048] IR/IT contexts=[8/8]
input: THRUSTMASTER FireStorm Dual Analog 2 as /class/input/input2
input: USB HID v1.10 Gamepad [THRUSTMASTER FireStorm Dual Analog 2] on usb-0000:00:04.2-2
usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driver
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {hardirq-on-W} -> {in-hardirq-W} usage. events/0/4 [HC1[1]:SC0[0]:HE0:SE1] takes:
(&list->lock){+...}, at: [<c0247689>] skb_dequeue+0x12/0x43
{hardirq-on-W} state was registered at:
[<c012d2a1>] lockdep_acquire+0x56/0x6f [<c029595b>] _spin_lock_bh+0x1c/0x29 [<c02922e0>] unix_stream_connect+0x2d8/0x3a7 [<c0243fb4>] sys_connect+0x54/0x71 [<c0244c5c>] sys_socketcall+0x6f/0x166 [<c0295afd>] sysenter_past_esp+0x56/0x8d irq event stamp: 1886 hardirqs last enabled at (1885): [<c0295a2b>] _spin_unlock_irqrestore+0x35/0x3b hardirqs last disabled at (1886): [<c01032fb>] common_interrupt+0x1b/0x2c softirqs last enabled at (0): [<c0114af0>] copy_process+0x265/0x11dc softirqs last disabled at (0): [<00000000>] init+0x3feffde0/0x1da
other info that might help us debug this:
no locks held by events/0/4.
stack backtrace: [<c0103810>] show_trace_log_lvl+0x4b/0xf4 [<c0103e11>] show_trace+0xd/0x10 [<c0103e58>] dump_stack+0x19/0x1b [<c012b8be>] print_usage_bug+0x1a4/0x1ae [<c012c3c6>] mark_lock+0x8a/0x411 [<c012cc55>] __lockdep_acquire+0x302/0x8f8 [<c012d2a1>] lockdep_acquire+0x56/0x6f [<c0295906>] _spin_lock_irqsave+0x20/0x2f [<c0247689>] skb_dequeue+0x12/0x43 [<e0bdb7ac>] hpsb_bus_reset+0x55/0xa2 [ieee1394] [<e0853e72>] ohci_irq_handler+0x322/0x6c9 [ohci1394] [<c0138d8c>] handle_IRQ_event+0x20/0x50 [<c0139d38>] handle_level_irq+0x71/0xb9 [<c0104ded>] do_IRQ+0x81/0xa8 [<c0103305>] common_interrupt+0x25/0x2c
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0120e085ca]
Using specific hotkey driver
EXT3 FS on dm-4, internal journal
Adding 257000k swap on /dev/hdb6. Priority:1 extents:1 across:257000k
Adding 64220k swap on /dev/hda5. Priority:2 extents:1 across:64220k
Adding 795208k swap on /dev/hdb7. Priority:2 extents:1 across:795208k
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 256M @ 0xd0000000
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: replayed 1 transactions in 0 seconds
ReiserFS: dm-1: Using r5 hash to sort names
Loading Reiser4. See www.namesys.com for a description of Reiser4.ps_hash_table: 32 bucketsd_cursor_hash_table: 256 bucketsz_hash_table: 8192 bucketsz_hash_table: 8192 bucketsj_hash_table: 16384 buckets
loading reiser4 bitmap......done (16 jiffies)
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: dm-6: found reiserfs format "3.6" with standard journal
ReiserFS: dm-6: using ordered data mode
ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-6: checking transaction log (dm-6)
ReiserFS: dm-6: replayed 1 transactions in 0 seconds
ReiserFS: dm-6: Using r5 hash to sort names
loop: loaded (max 8 devices)
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
hda: cache flushes not supported
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.17-rc5-mm1
# Tue May 30 20:17:03 2006
#CONFIG_X86_32=yCONFIG_GENERIC_TIME=yCONFIG_SEMAPHORE_SLEEPERS=yCONFIG_X86=yCONFIG_MMU=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SWAP_PREFETCH=yCONFIG_SYSVIPC=yCONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not setCONFIG_SYSCTL=y
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not setCONFIG_INITRAMFS_SOURCE=""CONFIG_KLIBC_ERRLIST=yCONFIG_KLIBC_ZLIB=yCONFIG_UID16=yCONFIG_VM86=yCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_EMBEDDED=yCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_RT_MUTEXES=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
# CONFIG_SMP is not setCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not setCONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_USE_3DNOW=yCONFIG_X86_TSC=yCONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_X86_UP_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=mCONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not setCONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not setCONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not setCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not setCONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_ALIGNED_ZONE_BOUNDARIES=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_UNALIGNED_ZONE_BOUNDARIES is not setCONFIG_ADAPTIVE_READAHEAD=yCONFIG_DEBUG_READAHEAD=yCONFIG_READAHEAD_SMOOTH_AGING=y
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
# CONFIG_EFI is not setCONFIG_REGPARM=yCONFIG_SECCOMP=y
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_KEXEC=yCONFIG_PHYSICAL_START=0x100000
# CONFIG_RESOURCES_32BIT is not set
# CONFIG_COMPAT_VDSO is not set
#
# Power management options (ACPI, APM)
#CONFIG_PM=yCONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not setCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION="/dev/hdb6"
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set CONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=mCONFIG_ACPI_HOTKEY=mCONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_ATLAS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set CONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=yCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not setCONFIG_ISA_DMA_API=yCONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=mCONFIG_BINFMT_MISC=m
#
# Networking
#CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not setCONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not setCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=m
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not setCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not setCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not setCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not setCONFIG_IP_NF_FTP=mCONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not setCONFIG_IP_NF_TFTP=mCONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not setCONFIG_IP_NF_QUEUE=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#CONFIG_NET_SCHED=yCONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not setCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not setCONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not setCONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=mCONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not setCONFIG_BLK_DEV_UB=mCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_INITRD=yCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_IDE_MAX_HWIFS=2CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=m
# CONFIG_SCSI_TGT is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_DOMAIN_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#CONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not setCONFIG_BLK_DEV_DM=mCONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not setCONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not setCONFIG_IEEE1394_OUI_DB=y
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not setCONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not setCONFIG_IEEE1394_DV1394=mCONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#CONFIG_NETDEVICES=yCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not setCONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not setCONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#CONFIG_NET_RADIO=y
# CONFIG_NET_WIRELESS_RTNETLINK is not set
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support #CONFIG_PRISM54=m
# CONFIG_HOSTAP is not set
# CONFIG_ACX is not set CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not setCONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not setCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not setCONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not setCONFIG_NETCONSOLE=yCONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_PCI is not setCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not setCONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not setCONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not setCONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not setCONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not setCONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not setCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_OCORES is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#CONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not setCONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not setCONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT8231 is not setCONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not setCONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_CX88 is not set
#
# Encoders and Decoders
#
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_CX25840 is not set
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
#
# V4L USB devices
#
# CONFIG_USB_QUICKCAM_MESSENGER is not set
#
# Radio Adapters
#
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#CONFIG_FIRMWARE_EDID=yCONFIG_FB=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not setCONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not setCONFIG_FB_NVIDIA=mCONFIG_FB_NVIDIA_I2C=yCONFIG_FB_RIVA=mCONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not setCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#CONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#CONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_RAWMIDI=mCONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not setCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=mCONFIG_SND_SEQ_RTCTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_AC97_CODEC=mCONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not setCONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_BANDWIDTH=yCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not setCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not setCONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not setCONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#CONFIG_USB_HID=mCONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #CONFIG_EDAC=m
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=mCONFIG_EDAC_AMD76X=mCONFIG_EDAC_E7XXX=m
# CONFIG_EDAC_E752X is not setCONFIG_EDAC_I82875P=m
# CONFIG_EDAC_I82860 is not setCONFIG_EDAC_R82600=mCONFIG_EDAC_POLL=y
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#CONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not setCONFIG_EXT2_FS_XIP=yCONFIG_FS_XIP=yCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISER4_FS=mCONFIG_REISER4_DEBUG=yCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not setCONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=y
# CONFIG_ZISOFS is not setCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=850CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=yCONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#CONFIG_NFS_FS=mCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not setCONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not setCONFIG_NFSD=mCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not setCONFIG_NFSD_V4=yCONFIG_NFSD_TCP=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not setCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=mCONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DEBUG_KERNEL=yCONFIG_LOG_BUF_SHIFT=15CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not setCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_MUTEX_ALLOC=yCONFIG_DEBUG_MUTEX_DEADLOCKS=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not setCONFIG_PROVE_SPIN_LOCKING=yCONFIG_PROVE_RW_LOCKING=yCONFIG_PROVE_MUTEX_LOCKING=yCONFIG_PROVE_RWSEM_LOCKING=yCONFIG_LOCKDEP=yCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not setCONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not setCONFIG_FRAME_POINTER=yCONFIG_UNWIND_INFO=yCONFIG_STACK_UNWIND=yCONFIG_FORCED_INLINING=y
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set
# CONFIG_KGDB is not setCONFIG_EARLY_PRINTK=yCONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not setCONFIG_STACK_BACKTRACE_COLS=1
#
# Page alloc debug is incompatible with Software Suspend on i386 #CONFIG_DEBUG_RODATA=yCONFIG_4KSTACKS=yCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=yCONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not setCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not setCONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not setCONFIG_CRC32=yCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=mCONFIG_ZLIB_DEFLATE=mCONFIG_PLIST=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_X86_BIOS_REBOOT=yCONFIG_KTIME_SCALAR=y
Quoted 11 lines · Laurent Riffard
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
...
Runtime locking validation.============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {hardirq-on-W} -> {in-hardirq-W} usage. events/0/4 [HC1[1]:SC0[0]:HE0:SE1] takes:
(&list->lock){+...}, at: [<c0247689>]skb_dequeue+0x12/0x43
hmmm skb_dequeue is called in a hard irq...
Quoted 4 lines
{hardirq-on-W} state was registered at:
[<c012d2a1>] lockdep_acquire+0x56/0x6f [<c029595b>] _spin_lock_bh+0x1c/0x29 [<c02922e0>] unix_stream_connect+0x2d8/0x3a7
.. yet it was taken only with spin_lock_bh() in unix_stream_connect, leaving interrupts enabled (and thus not allowing use inside a hard irq)
Quoted 12 lines
[<c0243fb4>] sys_connect+0x54/0x71 [<c0244c5c>] sys_socketcall+0x6f/0x166 [<c0295afd>] sysenter_past_esp+0x56/0x8d irq event stamp: 1886 hardirqs last enabled at (1885): [<c0295a2b>] _spin_unlock_irqrestore+0x35/0x3b hardirqs last disabled at (1886): [<c01032fb>] common_interrupt+0x1b/0x2c softirqs last enabled at (0): [<c0114af0>] copy_process+0x265/0x11dc softirqs last disabled at (0): [<00000000>] init+0x3feffde0/0x1daother info that might help us debug this:
no locks held by events/0/4.
Quoted 11 lines
stack backtrace: [<c0103810>] show_trace_log_lvl+0x4b/0xf4 [<c0103e11>] show_trace+0xd/0x10 [<c0103e58>] dump_stack+0x19/0x1b [<c012b8be>] print_usage_bug+0x1a4/0x1ae [<c012c3c6>] mark_lock+0x8a/0x411 [<c012cc55>] __lockdep_acquire+0x302/0x8f8 [<c012d2a1>] lockdep_acquire+0x56/0x6f [<c0295906>] _spin_lock_irqsave+0x20/0x2f [<c0247689>] skb_dequeue+0x12/0x43 [<e0bdb7ac>] hpsb_bus_reset+0x55/0xa2 [ieee1394]
yet hpsb_bus_reset() calls skb_dequeue (indirectly, via the inlined abort_requests() function) in a hard irq.
Quoted 49 lines · Arjan van de Ven
Quoted 11 lines · Laurent Riffard
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
...
Runtime locking validation.============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {hardirq-on-W} -> {in-hardirq-W} usage. events/0/4 [HC1[1]:SC0[0]:HE0:SE1] takes:
(&list->lock){+...}, at: [<c0247689>]skb_dequeue+0x12/0x43hmmm
skb_dequeueis called in a hard irq...Quoted 4 lines
{hardirq-on-W} state was registered at:
[<c012d2a1>] lockdep_acquire+0x56/0x6f [<c029595b>] _spin_lock_bh+0x1c/0x29 [<c02922e0>] unix_stream_connect+0x2d8/0x3a7.. yet it was taken only with
spin_lock_bh()inunix_stream_connect, leaving interrupts enabled (and thus not allowing use inside a hard irq)Quoted 12 lines
[<c0243fb4>] sys_connect+0x54/0x71 [<c0244c5c>] sys_socketcall+0x6f/0x166 [<c0295afd>] sysenter_past_esp+0x56/0x8d irq event stamp: 1886 hardirqs last enabled at (1885): [<c0295a2b>] _spin_unlock_irqrestore+0x35/0x3b hardirqs last disabled at (1886): [<c01032fb>] common_interrupt+0x1b/0x2c softirqs last enabled at (0): [<c0114af0>] copy_process+0x265/0x11dc softirqs last disabled at (0): [<00000000>] init+0x3feffde0/0x1daother info that might help us debug this:
no locks held by events/0/4.Quoted 11 lines
stack backtrace: [<c0103810>] show_trace_log_lvl+0x4b/0xf4 [<c0103e11>] show_trace+0xd/0x10 [<c0103e58>] dump_stack+0x19/0x1b [<c012b8be>] print_usage_bug+0x1a4/0x1ae [<c012c3c6>] mark_lock+0x8a/0x411 [<c012cc55>] __lockdep_acquire+0x302/0x8f8 [<c012d2a1>] lockdep_acquire+0x56/0x6f [<c0295906>] _spin_lock_irqsave+0x20/0x2f [<c0247689>] skb_dequeue+0x12/0x43 [<e0bdb7ac>] hpsb_bus_reset+0x55/0xa2 [ieee1394]
Quoted 3 lines
yet
hpsb_bus_reset()callsskb_dequeue(indirectly, via the inlinedabort_requests()function) in a hard irq.
On x86_64, I'm seeing what may be flakiness related to skb_dequeue. I haven't had a chance to look too closely, but the serial excerpt I have is below. The real BUG of interest is near the end with
BUG: sleeping function called from invalid context at include/linux/rwsem.h:49
At the time of failure, a kernel compile was taking place. I've also seen one ppc machine (not ppc64) lock up. There was no output to console so it may or may not be related.
INIT: version 2.86 booting
Welcome to Fedora Core
Press 'I' to enter interactive startup.
Setting clock (localtime): Tue May 30 11:04:10 CDT 2006 [ OK ]
Starting udev: [ OK ]
Setting hostname bl6-13.ltc.austin.ibm.com: [ OK ]
Setting up Logical Volume Management: 2 logical volume(s) in volume group "VolGroup00" now active
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 /dev/VolGroup00/LogVol00: clean, 275453/7929856 files, 2546251/7929856 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /boot: clean, 62/512512 files, 43374/512064 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Starting readahead_early: Starting background readahead: [ OK ] [ OK ] FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.17-rc5-mm1-autokern1/kernel/arch/x86_64/kernel/cpufreq/acpi-cpufreq.ko): No such device Bringing up loopback interface: [ OK ] Bringing up interface eth1: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Starting system message bus: [ OK ]
Starting Bluetooth services:[ OK ][ OK ]
Mounting other filesystems: [ OK ]
Starting hidd: [ OK ]
Starting automount: [ OK ]
Starting smartd: [ OK ]
Starting acpi daemon: [ OK ]
Starting hpiod: [ OK ]
Starting hpssd: [ OK ]
Starting cups: [ OK ]
Starting sshd: [ OK ]
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
Starting console mouse services: [ OK ]
Starting crond: [ OK ]
Starting xfs: [ OK ]
Starting anacron: [ OK ]
Starting atd: [ OK ]
Starting Avahi daemon: [ OK ]
Starting cups-config-daemon: [ OK ]
Starting HAL daemon: [ OK ]
Fedora Core release 5 (Bordeaux)
Kernel 2.6.17-rc5-mm1-autokern1 on an x86_64
bl6-13.ltc.austin.ibm.com login: -- 0:conmux-control -- time-stamp -- May/30/06 9:04:37 --
-- 0:conmux-control -- time-stamp -- May/30/06 9:08:26 --
NMI Watchdog detected LOCKUP on CPU 2
CPU 2 Modules linked in: ipv6 ppdev hidp rfcomm l2cap bluetooth video sony_acpi button battery asus_acpi ac lp parport_pc parport nvram
Pid: 25254, comm: cc1 Not tainted 2.6.17-rc5-mm1-autokern1 #1
RIP: 0010:[<ffffffff810814de>] [<ffffffff810814de>] cache_alloc_refill+0x16a/0x200
RSP: 0018:ffff81001d9edb88 EFLAGS: 00000097
RAX: 00000000ffffffff RBX: 000000000000000f RCX: ffff81001d9edcd4
RDX: ffff8100016df440 RSI: ffff81003c0cc000 RDI: ffff810037fd9400
RBP: ffff81003c0cc000 R08: ffff810037fda000 R09: ffff810037fd7000
R10: ffff81001d9ec000 R11: 0000000000000246 R12: ffff8100016df440
R13: ffff810037fda000 R14: 000000000000002c R15: ffff810037fd9400
FS: 00002b18bc9bcd30(0000) GS:ffff810037e09bc0(0063) knlGS:00000000f7f9e6b0
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 00000000f665c000 CR3: 000000001af2d000 CR4: 00000000000006e0
Process cc1 (pid: 25254, threadinfo ffff81001d9ec000, task ffff81003e048050)
Stack: 000000d000000246 0000000000000246 00000000000000d0 ffff810037fd9400
ffff810037fd9400 ffff81001d9edd68 0000000000000000 ffffffff81082a00
ffff81003b7b14c0 00000000000000d0
Call Trace:
[<ffffffff81082a00>] kmem_cache_alloc+0x7c/0x86
[<ffffffff8122e081>] __alloc_skb+0x30/0x11d
[<ffffffff8122c6e8>] sock_alloc_send_skb+0x6d/0x1ea
[<ffffffff8102c0d5>] __wake_up+0x36/0x4d
[<ffffffff8128949d>] unix_stream_sendmsg+0x14d/0x2ff
[<ffffffff81229fad>] do_sock_write+0xc7/0xd2
[<ffffffff8122a0fd>] sock_aio_write+0x4f/0x5e
[<ffffffff81086f28>] do_sync_write+0xc9/0x106
[<ffffffff812924f2>] do_page_fault+0x46f/0x7b0
[<ffffffff81046b6c>] autoremove_wake_function+0x0/0x2e
[<ffffffff810731f4>] do_mmap_pgoff+0x673/0x774
[<ffffffff8108704c>] vfs_write+0xe7/0x175
[<ffffffff8108718d>] sys_write+0x45/0x6e
[<ffffffff81022994>] cstar_do_call+0x1b/0x65
Code: 49 8b 04 24 48 89 68 08 48 89 45 00 4c 89 65 08 49 89 2c 24 console shuts up ...
NMI Watchdog detected LOCKUP on CPU 1
CPU 1 Modules linked in: ipv6 ppdev hidp rfcomm l2cap bluetooth video sony_acpi button battery asus_acpi ac lp parport_pc parport nvram
Pid: 15, comm: events/1 Not tainted 2.6.17-rc5-mm1-autokern1 #1
RIP: 0010:[<ffffffff81135167>] [<ffffffff81135167>] __delay+0xa/0x10
RSP: 0018:ffff810037f43d80 EFLAGS: 00000012
RAX: 0000000000000008 RBX: ffff8100016df480 RCX: 00000000a155bf6d
RDX: 0000000000000101 RSI: ffff8100016df440 RDI: 0000000000000001
RBP: 000000002e69b72b R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffff8100016dfc40 R12: 0000000000000001
R13: 0000000000000000 R14: ffff8100016df440 R15: ffff810037fd9400
FS: 00002b99ea9c72d0(0000) GS:ffff81003efb98c0(0000) knlGS:00000000f7fdb6b0
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000009afb30 CR3: 000000003ebc6000 CR4: 00000000000006e0
Process events/1 (pid: 15, threadinfo ffff810037f42000, task ffff810037fef050)
Stack: ffffffff81140cfc 0000000000000000 ffff8100016df440 ffff810037fda400
ffffffff81081c7a ffff8100016df440 0000000000000000 ffff8100016df440
ffff81003ebd7880 ffff810037fd9400
Call Trace:
[<ffffffff81140cfc>] _raw_spin_lock+0x8b/0xf1
[<ffffffff81081c7a>] drain_array+0x51/0xd3
[<ffffffff810837af>] cache_reap+0x0/0x2ce
[<ffffffff8108389b>] cache_reap+0xec/0x2ce
[<ffffffff810837af>] cache_reap+0x0/0x2ce
[<ffffffff81043354>] run_workqueue+0xa1/0xeb
[<ffffffff8104339e>] worker_thread+0x0/0x137
[<ffffffff810434a3>] worker_thread+0x105/0x137
[<ffffffff8102c02e>] default_wake_function+0x0/0xe
[<ffffffff8102c02e>] default_wake_function+0x0/0xe
[<ffffffff81046652>] kthread+0x107/0x133
[<ffffffff8104339e>] worker_thread+0x0/0x137
[<ffffffff8100a146>] child_rip+0x8/0x12
[<ffffffff8104339e>] worker_thread+0x0/0x137
[<ffffffff8104654b>] kthread+0x0/0x133
[<ffffffff8100a13e>] child_rip+0x0/0x12
Code: 48 39 f8 72 f5 c3 65 8b 04 25 24 00 00 00 48 98 48 69 c0 c0 console shuts up ...
<1>Unable to handle kernel NULL pointer dereference at 0000000000000008 RIP:
[<ffffffff8122f9aa>] skb_dequeue+0x2c/0x50
PGD 330cf067 PUD 0 Oops: 0002 [1] SMP last sysfs file: /block/sda/sda1/size
CPU 0 Modules linked in: ipv6 ppdev hidp rfcomm l2cap bluetooth video sony_acpi button battery asus_acpi ac lp parport_pc parport nvram
Pid: 1871, comm: sshd Not tainted 2.6.17-rc5-mm1-autokern1 #1
RIP: 0010:[<ffffffff8122f9aa>] [<ffffffff8122f9aa>] skb_dequeue+0x2c/0x50
RSP: 0018:ffff810032c81c28 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff810032a96510 RCX: 000000000000003f
RDX: 000000000000001f RSI: 0000000000000246 RDI: ffff810032a96528
RBP: ffff81003c0cc2c0 R08: 0000000100000000 R09: 0000000000000246
R10: 0000000000000246 R11: 000000000000001a R12: ffff810032a96528
R13: ffff810032c81da0 R14: ffff810032c81d68 R15: 0000000000000000
FS: 00002ac772097be0(0000) GS:ffffffff8146e000(0000) knlGS:00000000f7fad6b0
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 000000003d28b000 CR4: 00000000000006e0
Process sshd (pid: 1871, threadinfo ffff810032c80000, task ffff810037f4c7d0)
Stack: ffff810032a96510 ffff81003c0cc2c0 ffff810032a96440 ffffffff812899a6
ffffffa100000001 0000001a00000001 0000000000000000 00000040000000d0
0000000000003fe6 ffff81003280c180
Call Trace:
[<ffffffff812899a6>] unix_stream_recvmsg+0x101/0x4bf
[<ffffffff8122c946>] release_sock+0x10/0xae
[<ffffffff81258520>] tcp_sendmsg+0x9b0/0xa82
[<ffffffff81229d87>] do_sock_read+0xc6/0xd1
[<ffffffff81229ed7>] sock_aio_read+0x4f/0x5e
[<ffffffff81086cb0>] do_sync_read+0xc9/0x106
[<ffffffff81046b6c>] autoremove_wake_function+0x0/0x2e
[<ffffffff812905e8>] _spin_unlock_irq+0x6/0xa
[<ffffffff8128e4e5>] thread_return+0x64/0xec
[<ffffffff81086dd1>] vfs_read+0xe4/0x172
[<ffffffff8108711f>] sys_read+0x45/0x6e
[<ffffffff810092be>] system_call+0x7e/0x83
Code: 48 89 58 08 48 c7 45 00 00 00 00 00 48 c7 45 08 00 00 00 00 RIP [<ffffffff8122f9aa>] skb_dequeue+0x2c/0x50 RSP <ffff810032c81c28>CR2: 0000000000000008
<3>BUG: sleeping function called from invalid context at include/linux/rwsem.h:49
in_atomic():0, irqs_disabled():1
Call Trace: [<ffffffff81029ba0>] __might_sleep+0xc0/0xc2 [<ffffffff810403ed>] blocking_notifier_call_chain+0x1f/0x4e [<ffffffff81035a8a>] do_exit+0x22/0x8ce [<ffffffff81184817>] do_unblank_screen+0x29/0x121 [<ffffffff812927c5>] do_page_fault+0x742/0x7b0 [<ffffffff81029f49>] activate_task+0x4b/0x99 [<ffffffff81098aad>] __pollwait+0x0/0xdd [<ffffffff81009f8d>] error_exit+0x0/0x84 [<ffffffff8122f9aa>] skb_dequeue+0x2c/0x50 [<ffffffff8122f993>] skb_dequeue+0x15/0x50 [<ffffffff812899a6>] unix_stream_recvmsg+0x101/0x4bf [<ffffffff8122c946>] release_sock+0x10/0xae [<ffffffff81258520>] tcp_sendmsg+0x9b0/0xa82 [<ffffffff81229d87>] do_sock_read+0xc6/0xd1 [<ffffffff81229ed7>] sock_aio_read+0x4f/0x5e [<ffffffff81086cb0>] do_sync_read+0xc9/0x106 [<ffffffff81046b6c>] autoremove_wake_function+0x0/0x2e [<ffffffff812905e8>] _spin_unlock_irq+0x6/0xa [<ffffffff8128e4e5>] thread_return+0x64/0xec [<ffffffff81086dd1>] vfs_read+0xe4/0x172 [<ffffffff8108711f>] sys_read+0x45/0x6e [<ffffffff810092be>] system_call+0x7e/0x83
NMI Watchdog detected LOCKUP on CPU 3
CPU 3 Modules linked in: ipv6 ppdev hidp rfcomm l2cap bluetooth video sony_acpi button battery asus_acpi ac lp parport_pc parport nvram
Pid: 1710, comm: sshd Not tainted 2.6.17-rc5-mm1-autokern1 #1
RIP: 0010:[<ffffffff81140cfc>] [<ffffffff81140cfc>] _raw_spin_lock+0x8b/0xf1
RSP: 0018:ffff81003319db68 EFLAGS: 00000002
RAX: 0000000000000008 RBX: ffff8100016df480 RCX: 00000000b3e3ec80
RDX: 0000000000000105 RSI: 00000000000000d0 RDI: 0000000000000001
RBP: 000000001713db5d R08: ffff81003c0d0440 R09: ffff81003d177340
R10: 00005555556bf377 R11: 0000000000000246 R12: 0000000000000001
R13: ffff810037fd8c00 R14: 000000000000003c R15: ffff810037fd9400
FS: 00002b2015099be0(0000) GS:ffff8100016dfec0(0000) knlGS:00000000f7fb26b0
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00005555556bf168 CR3: 00000000348c8000 CR4: 00000000000006e0
Process sshd (pid: 1710, threadinfo ffff81003319c000, task ffff810037f57810)
Stack: 0000000000000246 00000000000000d0 ffff8100016df440 ffffffff810813ef
000000d000000246 0000000000000246 00000000000000d0 ffff810037fd9400
ffff810037fd9400 ffff81003319dd68
Call Trace:
[<ffffffff810813ef>] cache_alloc_refill+0x7b/0x200
[<ffffffff81082a00>] kmem_cache_alloc+0x7c/0x86
[<ffffffff8122e081>] __alloc_skb+0x30/0x11d
[<ffffffff8122c6e8>] sock_alloc_send_skb+0x6d/0x1ea
[<ffffffff810381e0>] current_fs_time+0x4d/0x52
[<ffffffff8128949d>] unix_stream_sendmsg+0x14d/0x2ff
[<ffffffff81229fad>] do_sock_write+0xc7/0xd2
[<ffffffff8122a0fd>] sock_aio_write+0x4f/0x5e
[<ffffffff8106f6e8>] do_wp_page+0x38e/0x3c1
[<ffffffff81086f28>] do_sync_write+0xc9/0x106
[<ffffffff812924f2>] do_page_fault+0x46f/0x7b0
[<ffffffff81046b6c>] autoremove_wake_function+0x0/0x2e
[<ffffffff812905e8>] _spin_unlock_irq+0x6/0xa
[<ffffffff8128e4e5>] thread_return+0x64/0xec
[<ffffffff81032628>] do_fork+0x138/0x1b0
[<ffffffff8108704c>] vfs_write+0xe7/0x175
[<ffffffff8108718(bot:conmon-payload) disconnected
d>] sys_write+0x45/0x6e
[<ffffffff810092be>] system_call+0x7e/0x83
Code: eb d9 45 85 e4 74 d2 45 31 e4 65 48 8b 04 25 00 00 00 00 65 console shuts up ...Signature · 3 lines
Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
Review
Quoted 7 lines · Andrew Morton
(quoted diff) +4
-0+node-hotplug-register-cpu-remove-node-struct.patch +node-hotplug-fixes-callres-of-register_cpu.patch +node-hotplug-fixes-callres-of-register_cpu-powerpc-warning-fix.patch +node-hotplug-register_node-fix.patch NUMA node hotplugging updates
Hi Andrew,
I had to apply the following patch to build this -mm on alpha.
Brice
arch/alpha/kernel/setup.c +1 -1
@@ -481,7 +481,7 @@struct cpu *p =kzalloc (sizeof (*p),GFP_KERNEL );if (!p)return -ENOMEM ; -register_cpu (p, i,NULL ); +register_cpu (p, i); }return 0 ; }
I'm seeing problems with MSI-X interrupts on 2.6.17-rc5-mm1. I'll try to debug the MSI patches in -mm further in the next day or so, but for now I'll post the symptoms.
When I load the ib_mthca driver with MSI-X interrupts enabled, I get the following crash as soon as the first interrupt is generated.
[ 329.979089] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [ 329.995487] [<0000000000000000>] <8>[ 330.012818] PGD 119477067 PUD 119b48067 PMD 0 [ 330.027009] Oops: 0010 [1] SMP [ 330.036503] last sysfs file: /class/net/ib2/address <8>[ 330.051084] CPU 0 <8>[ 330.057932] Modules linked in: ib_mthca ib_srp ib_cm ib_ipoib ib_sa ib_mad ib_core nfs lockd nfs_acl sunrpc ipv6 thermal fan button processor ac battery dm_mod ide_generic ide_disk evdev usbhid ide_cd cdrom amd74xx psmouse serio_raw e1000 pcspkr generic ohci_hcd ehci_hcd ide_core <8>[ 330.134158] Pid: 0, comm: idle Not tainted 2.6.17-rc5-mm1 #7 <8>[ 330.151851] RIP: 0010:[<0000000000000000>] [<0000000000000000>] <8>[ 330.170116] RSP: 0000:ffffffff805d4f98 EFLAGS: 00010016 <8>[ 330.187344] RAX: 0000000000005200 RBX: ffffffff80873eb8 RCX: 0000000000000000 <8>[ 330.209448] RDX: ffffffff80873eb8 RSI: ffffffff80863e80 RDI: 0000000000000052 <8>[ 330.231552] RBP: ffffffff805d4fb0 R08: 0000000000000001 R09: ffffffff804380f7 <8>[ 330.253656] R10: ffff81007adc6000 R11: 0000000000000000 R12: 0000000000000052 <8>[ 330.275762] R13: 0000000000090000 R14: 0000000000000000 R15: 0000000000000000 <8>[ 330.297867] FS: 00002b9e555966d0(0000) GS:ffffffff8085c000(0000) knlGS:0000000000000000 <8>[ 330.322823] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <8>[ 330.340777] CR2: 0000000000000000 CR3: 0000000119bd7000 CR4: 00000000000006e0 <8>[ 330.362882] Process idle (pid: 0, threadinfo ffffffff80872000, task ffffffff804baa00) <8>[ 330.387061] Stack: ffffffff8020c693 ffffffff80207c93 0000000000000100 ffffffff80873ee0 <8>[ 330.411423] ffffffff80209b89 <EOI> ff6500230f54e8fa 65c900000020250c 00000010250c8b48 <8>[ 330.438222] f700001fd8e98148 7400000003582444 <8>[ 330.454231] Call Trace: <8>[ 330.462870] <IRQ> [<ffffffff8020c693>] do_IRQ+0x5e/0x6f <8>[ 330.479631] [<ffffffff80207c93>] default_idle+0x0/0x9b <8>[ 330.496080] [<ffffffff80209b89>] ret_from_intr+0x0/0xf <8>[ 330.512526] <EOI>Unable to handle kernel paging request at ffffffff82800000 RIP: [ 332.136320] [<ffffffff8020ad6e>] show_trace+0x145/0x195 <8>[ 332.159591] PGD 203027 PUD 205027 PMD 0 [ 332.172226] Oops: 0000 [2] SMP [ 332.181720] last sysfs file: /class/net/ib2/address
<
Quoted 6 lines · On Tue, 30 May 2006 14:24:03 -0700 Roland Dreier <[email protected]> wrote:
I'm seeing problems with MSI-X interrupts on 2.6.17-rc5-mm1. I'll try to debug the MSI patches in -mm further in the next day or so, but for now I'll post the symptoms.
When I load the
ib_mthcadriver with MSI-X interrupts enabled, I get the following crash as soon as the first interrupt is generated.
do_IRQ() did a jump-to-zero. So there's no handler installed.
Quoted 31 lines
[ 329.979089] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [ 329.995487] [<0000000000000000>] <8>[ 330.012818] PGD 119477067 PUD 119b48067 PMD 0 [ 330.027009] Oops: 0010 [1] SMP [ 330.036503] last sysfs file: /class/net/ib2/address <8>[ 330.051084] CPU 0 <8>[ 330.057932] Modules linked in: ib_mthca ib_srp ib_cm ib_ipoib ib_sa ib_mad ib_core nfs lockd nfs_acl sunrpc ipv6 thermal fan button processor ac battery dm_mod ide_generic ide_disk evdev usbhid ide_cd cdrom amd74xx psmouse serio_raw e1000 pcspkr generic ohci_hcd ehci_hcd ide_core <8>[ 330.134158] Pid: 0, comm: idle Not tainted 2.6.17-rc5-mm1 #7 <8>[ 330.151851] RIP: 0010:[<0000000000000000>] [<0000000000000000>] <8>[ 330.170116] RSP: 0000:ffffffff805d4f98 EFLAGS: 00010016 <8>[ 330.187344] RAX: 0000000000005200 RBX: ffffffff80873eb8 RCX: 0000000000000000 <8>[ 330.209448] RDX: ffffffff80873eb8 RSI: ffffffff80863e80 RDI: 0000000000000052 <8>[ 330.231552] RBP: ffffffff805d4fb0 R08: 0000000000000001 R09: ffffffff804380f7 <8>[ 330.253656] R10: ffff81007adc6000 R11: 0000000000000000 R12: 0000000000000052 <8>[ 330.275762] R13: 0000000000090000 R14: 0000000000000000 R15: 0000000000000000 <8>[ 330.297867] FS: 00002b9e555966d0(0000) GS:ffffffff8085c000(0000) knlGS:0000000000000000 <8>[ 330.322823] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <8>[ 330.340777] CR2: 0000000000000000 CR3: 0000000119bd7000 CR4: 00000000000006e0 <8>[ 330.362882] Process idle (pid: 0, threadinfo ffffffff80872000, task ffffffff804baa00) <8>[ 330.387061] Stack: ffffffff8020c693 ffffffff80207c93 0000000000000100 ffffffff80873ee0 <8>[ 330.411423] ffffffff80209b89 <EOI> ff6500230f54e8fa 65c900000020250c 00000010250c8b48 <8>[ 330.438222] f700001fd8e98148 7400000003582444 <8>[ 330.454231] Call Trace: <8>[ 330.462870] <IRQ> [<ffffffff8020c693>] do_IRQ+0x5e/0x6f <8>[ 330.479631] [<ffffffff80207c93>] default_idle+0x0/0x9b <8>[ 330.496080] [<ffffffff80209b89>] ret_from_intr+0x0/0xf <8>[ 330.512526] <EOI>Unable to handle kernel paging request at ffffffff82800000 RIP: [ 332.136320] [<ffffffff8020ad6e>] show_trace+0x145/0x195 <8>[ 332.159591] PGD 203027 PUD 205027 PMD 0 [ 332.172226] Oops: 0000 [2] SMP [ 332.181720] last sysfs file: /class/net/ib2/address
Quoted 1 line
<
The possibly-relevant patches are:
box:/usr/src/25> grep msi series gregkh-pci-pci-msi-abstractions-and-support-for-altix.patch gregkh-pci-pci-altix-msi-support.patch allow-msi-to-work-on-kexec-kernel.patch pci-disable-msi-mode-in-pci_disable_device.patch x86_64-msi-apic-build-fix.patch
But this bug seems to be at a higher level - I'd be more suspecting the genirq patches forgot to install a handler somehow.
Quoted 11 lines · Andrew Morton
Quoted 6 lines · On Tue, 30 May 2006 14:24:03 -0700 Roland Dreier <[email protected]> wrote:
I'm seeing problems with MSI-X interrupts on 2.6.17-rc5-mm1. I'll try to debug the MSI patches in -mm further in the next day or so, but for now I'll post the symptoms.
When I load the
ib_mthcadriver with MSI-X interrupts enabled, I get the following crash as soon as the first interrupt is generated.
do_IRQ()did a jump-to-zero. So there's no handler installed.
yep. No desc->irq_handler. That should be 'impossible' on x86_64, because the irq_desc[] array is initialized with handle_bad_irq, and from that point on x86_64 only uses set_irq_chip_and_handler(), which at most can set it to another (non-NULL) handle_irq function. Weird.
does MSI much with the irq_desc[] separately perhaps, clearing handle_irq in the process perhaps?
Ingo
Quoted 9 lines · Ingo Molnar
Quoted 1 line
do_IRQ()did a jump-to-zero. So there's no handler installed.yep. No
desc->irq_handler. That should be 'impossible' onx86_64, because the irq_desc[] array is initialized withhandle_bad_irq, and from that point onx86_64only usesset_irq_chip_and_handler(), which at most can set it to another (non-NULL)handle_irqfunction. Weird.does MSI much with the irq_desc[] separately perhaps, clearing
handle_irqin the process perhaps?
aha - drivers/pci/msi.c sets msix_irq_type, which has no handle_irq entry. This needs to be converted to irqchips.
Ingo
Quoted 10 lines · Ingo Molnar
Quoted 7 lines · Ingo Molnar
Quoted 1 line
do_IRQ()did a jump-to-zero. So there's no handler installed.yep. No
desc->irq_handler. That should be 'impossible' onx86_64, because the irq_desc[] array is initialized withhandle_bad_irq, and from that point onx86_64only usesset_irq_chip_and_handler(), which at most can set it to another (non-NULL)handle_irqfunction. Weird.
Quoted 5 lines
Quoted 2 lines
does MSI much with the irq_desc[] separately perhaps, clearing
handle_irqin the process perhaps?aha -
drivers/pci/msi.csetsmsix_irq_type, which has nohandle_irqentry. This needs to be converted to irqchips.
still ... that doesnt explain how the irq_desc[].irq_handler got NULL.
Ingo
CC'ed Ben, who is hacking on msi, IIRC
Quoted 8 lines · Ingo Molnar
Quoted 6 lines
Quoted 3 lines
does MSI much with the irq_desc[] separately perhaps, clearing
handle_irqin the process perhaps?aha -
drivers/pci/msi.csetsmsix_irq_type, which has nohandle_irqentry. This needs to be converted to irqchips.still ... that doesnt explain how the irq_desc[].irq_handler got NULL.
It has it's own irq_desc array
static struct msi_desc* msi_desc[NR_IRQS] = { [0 ... NR_IRQS-1] = NULL };
Too tired right now. I look into this tomorrow.
tglx
Quoted 7 lines · Thomas Gleixner
CC'ed Ben, who is hacking on msi, IIRC
Quoted 4 lines · Ingo Molnar
Quoted 4 lines
Quoted 3 lines
does MSI much with the irq_desc[] separately perhaps, clearing
handle_irqin the process perhaps?
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
aha -
drivers/pci/msi.csetsmsix_irq_type, which has nohandle_irqentry. This needs to be converted to irqchips.still ... that doesnt explain how the irq_desc[].irq_handler got NULL.
It has it's own
irq_descarraystatic struct msi_desc* msi_desc[NR_IRQS] = { [0 ... NR_IRQS-1] = NULL };
ah ...
then i guess a quick solution would be to do:
if (!irq_desc[irq].irq_handler) __do_IRQ(irq, regs); else generic_handle_irq(irq, regs);
in arch/x86_64/kernel/irq.c [and in arch/i386/kernel/irq.c], and __do_IRQ() should handle the old-style irq-type MSI code just fine.
Ingo
Quoted 9 lines
then i guess a quick solution would be to do:
if (!irq_desc[irq].irq_handler) __do_IRQ(irq, regs); else generic_handle_irq(irq, regs);in
arch/x86_64/kernel/irq.c[and inarch/i386/kernel/irq.c], and__do_IRQ()should handle the old-style irq-type MSI code just fine.
Indeed (fixing ".irq_handler" to be ".handle_irq"), with that change MSI-X works fine with ib_mthca on my system. The only slightly funny quirk is that the IRQ type is shown as "PCI-MSI-X-<NULL>", I guess because it's printing handle_irq_name(NULL).
However (as BenH pointed out) there's definitely some work to do to untangle MSI...
- R.
Quoted 10 lines · Thomas Gleixner
CC'ed Ben, who is hacking on msi, IIRC
Quoted 7 lines · Ingo Molnar
Quoted 6 lines
Quoted 3 lines
does MSI much with the irq_desc[] separately perhaps, clearing
handle_irqin the process perhaps?aha -
drivers/pci/msi.csetsmsix_irq_type, which has nohandle_irqentry. This needs to be converted to irqchips.
Quoted 7 lines
Quoted 1 line
still ... that doesnt explain how the irq_desc[].irq_handler got NULL.
It has it's own
irq_descarraystatic struct msi_desc* msi_desc[NR_IRQS] = { [0 ... NR_IRQS-1] = NULL };
Too tired right now. I look into this tomorrow.
The only way to fix drivers/pci/msi.c is to delete it.
Honest, there is nothing salvageable in that code. I've been looking at the issues involved in supporting MSIs on various powerpc platforms and I came to the conclusion that there isn't a single re-useable line of code in there. Not only it's totally specific to a given set of intel chipsets, but it's also broken beyond imagination. I wonder how that code got in there in the first place, especially maskqueraded as "generic" code. Greg must have been drunk.
At this point, the only solution for us (powerpc) is to allow the arch to have it's own implementatin of the toplevel MSI API (pci_enable_msi() etc...). From there, depending on what we come up with, we'll look into moving that back into generic code, but we are under some pressure for time (stupid 2 weeks merge window thing is a pain sometimes).
Ben.
Quoted 21 lines · Benjamin Herrenschmidt
Quoted 10 lines · Thomas Gleixner
CC'ed Ben, who is hacking on msi, IIRC
Quoted 7 lines · Ingo Molnar
Quoted 6 lines
Quoted 3 lines
does MSI much with the irq_desc[] separately perhaps, clearing
handle_irqin the process perhaps?aha -
drivers/pci/msi.csetsmsix_irq_type, which has nohandle_irqentry. This needs to be converted to irqchips.Quoted 7 lines
Quoted 1 line
still ... that doesnt explain how the irq_desc[].irq_handler got NULL.
It has it's own
irq_descarraystatic struct msi_desc* msi_desc[NR_IRQS] = { [0 ... NR_IRQS-1] = NULL };
Too tired right now. I look into this tomorrow.
The only way to fix
drivers/pci/msi.cis to delete it.
Quoted 7 lines
Honest, there is nothing salvageable in that code. I've been looking at the issues involved in supporting MSIs on various powerpc platforms and I came to the conclusion that there isn't a single re-useable line of code in there. Not only it's totally specific to a given set of intel chipsets, but it's also broken beyond imagination. I wonder how that code got in there in the first place, especially maskqueraded as "generic" code. Greg must have been drunk.
No, not drunk, just that no other arch offered up any potential help to get this working. So, we have one arch that has it working well, and finally, many years later when PPC64 catches up with the rest of the world, we have issues :)
Feel free to help untangle it. ia64 just did a big chunk of work on this, and there are further patches in the -mm tree that help get it working there. ppc64 and other arch support are also welcome. You are the ones who know how your arch handles this stuff the best.
Quoted 5 lines
At this point, the only solution for us (powerpc) is to allow the arch to have it's own implementatin of the toplevel MSI API (
pci_enable_msi()etc...). From there, depending on what we come up with, we'll look into moving that back into generic code, but we are under some pressure for time (stupid 2 weeks merge window thing is a pain sometimes).
2 week merge window? Come on, just give it to me and let it sit in -mm for a while. I have some stuff in there for over 2 months before it goes to Linus to make sure that it's safe. You can do the same for your trees.
I gladly accept patches...
thanks,
greg k-h
Hi,
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
I resend this one. It contains additional debug info
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage. events/1/9 [HC0[0]:SC1[1]:HE1:SE0] takes:
(&base->lock#2){++..}, at: [<c0128115>] run_timer_softirq+0x42/0x17a {in-hardirq-W} state was registered at:
[<c013869a>] lockdep_acquire+0x50/0x68 [<c02eae04>] _spin_lock_irqsave+0x2d/0x3c [<c0128b42>] lock_timer_base+0x1f/0x3a [<c0128bfd>] __mod_timer+0x29/0xaa [<c0128f48>] mod_timer+0x32/0x36 [<c02903da>] i8042_interrupt+0x21/0x1fb [<c014c0c8>] handle_IRQ_event+0x1d/0x52 [<c014d007>] handle_edge_irq+0xc7/0x10c [<c01054ca>] do_IRQ+0x86/0xac irq event stamp: 44459 hardirqs last enabled at (44458): [<c02eb137>] _spin_unlock_irq+0x24/0x47 hardirqs last disabled at (44459): [<c02ead78>] _spin_lock_irq+0x11/0x38 softirqs last enabled at (44446): [<c012492d>] __do_softirq+0xf0/0xf8 softirqs last disabled at (44453): [<c01053e5>] do_softirq+0x5e/0xbd
other info that might help us debug this:
1 locks held by events/1/9:
#0: (&base->lock#2){++..}, at: [<c0128115>] run_timer_softirq+0x42/0x17a
stack backtrace: [<c0104208>] show_trace+0x1b/0x20 [<c01042e6>] dump_stack+0x1f/0x24 [<c0136cbc>] print_usage_bug+0x1a5/0x1b1 [<c01372ef>] mark_lock+0x21d/0x3e7 [<c01374fc>] mark_held_locks+0x43/0x63 [<c0138421>] trace_hardirqs_on+0xc4/0x10b [<c02eb512>] restore_nocheck+0x8/0xb ======================= ---------------------------
| preempt count: 00000003 ]
| 3-level deep critical section nesting:
----------------------------------------
.. [<c02ead7f>] .... _spin_lock_irq+0x18/0x38
.....[<c0128115>] .. ( <= run_timer_softirq+0x42/0x17a)
.. [<c011fe13>] .... vprintk+0x15/0x2e0
.....[<c01200f8>] .. ( <= printk+0x1a/0x1c)
.. [<c02eadf2>] .... _spin_lock_irqsave+0x1b/0x3c
.....[<c011f923>] .. ( <= release_console_sem+0x1f/0x1e5)
Here is dmesg
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-dmesg4
Here is config
http://www.stardust.webpages.pl/files/mm/2.6.17-rc5-mm1/mm-config4
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Steven Rostedt
maintainerOh look what I found. It seems that little driver of Andrew's has come back to haunt me :) And I think it has to do with that cute little disable_irq in vortex_timer again.
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
idle/0 [HC0[0]:SC1[2]:HE1:SE0] takes:
(&vp->lock){++..}, at: [<f8895b44>] vortex_timer+0x414/0x490 [3c59x]
{in-hardirq-W} state was registered at:
[<c013c759>] lockdep_acquire+0x59/0x70 [<c031a11d>] _spin_lock+0x3d/0x50 [<f8898983>] boomerang_interrupt+0x33/0x470 [3c59x] [<c0147a11>] handle_IRQ_event+0x31/0x70 [<c0149304>] handle_level_irq+0xa4/0x100 [<c0105658>] do_IRQ+0x58/0x90 [<c010348d>] common_interrupt+0x25/0x2c [<c010162d>] cpu_idle+0x4d/0xb0 [<c01002e5>] rest_init+0x45/0x50 [<c03f881a>] start_kernel+0x32a/0x460 [<c0100210>] 0xc0100210 irq event stamp: 220672 hardirqs last enabled at (220672): [<c031aa45>] _spin_unlock_irqrestore+0x65/00hardirqs last disabled at (220671): [<c031a5d6>] _spin_lock_irqsave+0x16/0x60 softirqs last enabled at (220658): [<c0124453>] __do_softirq+0xf3/0x110 softirqs last disabled at (220667): [<c01244e5>] do_softirq+0x75/0x80
other info that might help us debug this:
no locks held by idle/0.
stack backtrace: <c01052bb> show_trace+0x1b/0x20 <c01052e6> dump_stack+0x26/0x30 <c013af5d> print_usage_bug+0x22d/0x240 <c013b591> mark_lock+0x621/0x6c0 <c013b6ff> __lockdep_acquire+0xcf/0xd30 <c013c759> lockdep_acquire+0x59/0x70 <c031a172> _spin_lock_bh+0x42/0x50 <f8895b44> vortex_timer+0x414/0x490 [3c59x] <c0128cf9> run_timer_softirq+0xc9/0x1a0 <c01243e7> __do_softirq+0x87/0x110 <c01244e5> do_softirq+0x75/0x80 <c0124650> irq_exit+0x50/0x60 <c01102a3> smp_apic_timer_interrupt+0x73/0x80 <c010354e> apic_timer_interrupt0 <c010162d> cpu_idle+0x4d/0xb0 <c010f2a5> start_secondary+0x455/0x500 <00000000> 0x0 <f7f85fb4> 0xf7f85fb4
-- Steve
Quoted 31 lines · On Tue, 30 May 2006 23:17:28 -0400 Steven Rostedt <[email protected]> wrote:
Oh look what I found. It seems that little driver of Andrew's has come back to haunt me :) And I think it has to do with that cute little
disable_irqinvortex_timeragain.============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
idle/0 [HC0[0]:SC1[2]:HE1:SE0] takes:
(&vp->lock){++..}, at: [<f8895b44>]vortex_timer+0x414/0x490[3c59x]
{in-hardirq-W} state was registered at:[<c013c759>] lockdep_acquire+0x59/0x70 [<c031a11d>] _spin_lock+0x3d/0x50 [<f8898983>] boomerang_interrupt+0x33/0x470 [3c59x] [<c0147a11>] handle_IRQ_event+0x31/0x70 [<c0149304>] handle_level_irq+0xa4/0x100 [<c0105658>] do_IRQ+0x58/0x90 [<c010348d>] common_interrupt+0x25/0x2c [<c010162d>] cpu_idle+0x4d/0xb0 [<c01002e5>] rest_init+0x45/0x50 [<c03f881a>] start_kernel+0x32a/0x460 [<c0100210>] 0xc0100210 irq event stamp: 220672 hardirqs last enabled at (220672): [<c031aa45>] _spin_unlock_irqrestore+0x65/00hardirqs last disabled at (220671): [<c031a5d6>] _spin_lock_irqsave+0x16/0x60 softirqs last enabled at (220658): [<c0124453>] __do_softirq+0xf3/0x110 softirqs last disabled at (220667): [<c01244e5>] do_softirq+0x75/0x80other info that might help us debug this:
no locks held by idle/0.
Quoted 8 lines
stack backtrace: <c01052bb> show_trace+0x1b/0x20 <c01052e6> dump_stack+0x26/0x30 <c013af5d> print_usage_bug+0x22d/0x240 <c013b591> mark_lock+0x621/0x6c0 <c013b6ff> __lockdep_acquire+0xcf/0xd30 <c013c759> lockdep_acquire+0x59/0x70 <c031a172> _spin_lock_bh+0x42/0x50 <f8895b44> vortex_timer+0x414/0x490 [3c59x] <c0128cf9> run_timer_softirq+0xc9/0x1a0 <c01243e7> __do_softirq+0x87/0x110 <c01244e5> do_softirq+0x75/0x80 <c0124650> irq_exit+0x50/0x60 <c01102a3> smp_apic_timer_interrupt+0x73/0x80 <c010354e> apic_timer_interrupt0 <c010162d> cpu_idle+0x4d/0xb0 <c010f2a5> start_secondary+0x455/0x500 <00000000> 0x0 <f7f85fb4> 0xf7f85fb4
Without having looked at it very hard, I'd venture that this is a false positive - that driver uses disable_irq() to prevent reentry onto that lock.
It does that because it knows it's about to spend a long time talking with the mii registers and it doesn't want to do that with interrupts disabled.
Quoted 3 lines · Andrew Morton
Without having looked at it very hard, I'd venture that this is a false positive - that driver uses
disable_irq()to prevent reentry onto that lock.
correct.
Quoted 3 lines
It does that because it knows it's about to spend a long time talking with the mii registers and it doesn't want to do that with interrupts disabled.
i still consider it a 'quirky' locking construct, because disabling interrupts for a long time also disables all other devices sharing the same IRQ line - not nice.
Also, this is a really hard case for lockdep to detect automatically. (fortunately it's also relatively rare)
OTOH, the straightforward lockdep workaround would be to take the spinlock and thus disable all local interrupts - not too nice either.
Albeit in some ways it's still a bit nicer conceptually than disabling the irq line, because other CPUs are still operational, and under certain locking designs [preempt-rt] spin_lock_irq() does not disable local interrupts.
Steve, can you think of any better solution? I dont have this card.
Ingo
Steven Rostedt
maintainerQuoted 12 lines · Ingo Molnar
Quoted 3 lines · Andrew Morton
Without having looked at it very hard, I'd venture that this is a false positive - that driver uses
disable_irq()to prevent reentry onto that lock.correct.
Quoted 3 lines
It does that because it knows it's about to spend a long time talking with the mii registers and it doesn't want to do that with interrupts disabled.
Quoted 6 lines
i still consider it a 'quirky' locking construct, because disabling interrupts for a long time also disables all other devices sharing the same IRQ line - not nice.
Also, this is a really hard case for lockdep to detect automatically. (fortunately it's also relatively rare)
What's the standard way to teach lockdep about this?
Quoted 10 lines
OTOH, the straightforward lockdep workaround would be to take the spinlock and thus disable all local interrupts - not too nice either.
Albeit in some ways it's still a bit nicer conceptually than disabling the irq line, because other CPUs are still operational, and under certain locking designs [preempt-rt]
spin_lock_irq()does not disable local interrupts.Steve, can you think of any better solution? I dont have this card.
Until this popped up, I didn't know I had this card either ;) (the last time we dealt with this card was to help someone else)
Anyway, I'll look into the way this card works and start to play with it when I get some time.
Andrew, do you have any docs that I can read to understand the card a little better?
Thanks,
-- Steve
Quoted 4 lines · Steven Rostedt
Quoted 4 lines
Quoted 3 lines
It does that because it knows it's about to spend a long time talking with the mii registers and it doesn't want to do that with interrupts disabled.
Quoted 8 lines
Quoted 6 lines
i still consider it a 'quirky' locking construct, because disabling interrupts for a long time also disables all other devices sharing the same IRQ line - not nice.
Also, this is a really hard case for lockdep to detect automatically. (fortunately it's also relatively rare)
What's the standard way to teach lockdep about this?
Not yet. One possibility would be to use existing locks and to get rid of the disable_irq(). One technique could be to disable the IRQ on the card (i think the code already does this), and then call synchronize_irq() instead of disable_irq().
Ingo
Quoted 9 lines · Andrew Morton
On Tue, 30 May 2006 23:17:28 -0400
Steven Rostedt <[email protected]> wrote:Without having looked at it very hard, I'd venture that this is a false positive - that driver uses
disable_irq()to prevent reentry onto that lock.It does that because it knows it's about to spend a long time talking with the mii registers and it doesn't want to do that with interrupts disabled.
the scsi controller who shares that irq with your NIC just *enjoys* long disable_irq() periods.. it can be nice and lazy about it ;)
Quoted 3 lines · Andrew Morton
- Merged the runtime locking validator. If you enable this your machine will run slowly.
The help in menuconfig mentions that a user looking for more info should reference Documentation/locking-correctness.txt which doesn't exist.
Jesse
Quoted 8 lines · Jesse Brandeburg
Quoted 3 lines · Andrew Morton
- Merged the runtime locking validator. If you enable this your machine will run slowly.
The help in menuconfig mentions that a user looking for more info should reference
Documentation/locking-correctness.txtwhich doesn't exist.
indeed - i'll fix this.
Ingo
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
Hello, I've got this nice BUG:
pktcdvd: writer pktcdvd0 mapped to hdc
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000084 printing eip: c01118f1 *pde = 00000000 Oops: 0000 [#1] last sysfs file: /block/pktcdvd0/removable Modules linked in: pktcdvd lp parport_pc parport snd_pcm_oss snd_mixer_oss snd_ens1371 gameport snd_rawmidi snd_seq_device snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore af_packet floppy ide_cd cdrom loop aes dm_crypt nls_iso8859_1 nls_cp850 vfat fat reiser4 reiserfs via_agp agpgart video joydev ohci1394 usbhid ieee1394 uhci_hcd usbcore dm_mirror dm_mod via82cxxx CPU: 0 EIP: 0060:[<c01118f1>] Not tainted VLI EFLAGS: 00010006 (2.6.17-rc5-mm1 #11)
EIP is at do_page_fault+0xb4/0x5bc
eax: d6750084 ebx: d6750000 ecx: 0000007b edx: 00000000
esi: d6758000 edi: c011183d ebp: d675007c esp: d6750044
ds: 007b es: 007b ss: 0068
Process (pid: 0, threadinfo=d674f000 task=d657c000)
Stack: 00000000 d6750084 00000000 00000049 00000084 00000000 00001e2e 02001120
00000027 00000022 00000055 d6750000 d6758000 c011183d d67500f0 c010340d
d6750000 0000007b 00000000 d6758000 c011183d d67500f0 d67500f8 0000007b
Call Trace:
[<c010340d>] error_code+0x39/0x40
Code: 00 00 c0 81 0f 84 12 02 00 00 e9 1c 05 00 00 8b 45 cc f7 40 30 00 02 02 00 74 06 e8 68 af 01 00 fb f7 43 14 ff ff ff ef 8b 55 d0 <8b> b2 84 00 00 00 0f 85 e5 01 00 00 85 f6 0f 84 dd 01 00 00 8d
EIP: [<c01118f1>] do_page_fault+0xb4/0x5bc SS:ESP 0068:d6750044
<0>Kernel panic - not syncing: Fatal exception in interrupt
BUG: warning at kernel/panic.c:138/panic()
[<c0103810>] show_trace_log_lvl+0x4b/0xf4
[<c0103e11>] show_trace+0xd/0x10
[<c0103e58>] dump_stack+0x19/0x1b
[<c0116768>] panic+0x14d/0x161
[<c0103d0d>] die+0x231/0x266
[<c0111cc3>] do_page_fault+0x486/0x5bcSysRq : Emergency Sync
SysRq : Emergency Sync
SysRq : Emergency Remount R/O
SysRq : Emergency Sync
SysRq : Resetting
I also tried 2.6.17-rc5-mm1-lockdep with Lockdep-annotate-rpc_populate-for-child-relationship-of-its-mutex.patch and lock-validator-irqflags-trace-entry.S-fix.patch, with no more luck:
pktcdvd: writer pktcdvd0 mapped to hdc
BUG: unable to handle kernel paging request at virtual address ff384345 printing eip: c012d237 *pde = 00000000 BUG: unable to handle kernel paging request at virtual address ff383b65 printing eip: c0111c9b *pde = 00000000 Oops: 0002 [#1] last sysfs file: /block/pktcdvd0/removable Modules linked in: pktcdvd lp parport_pc parport snd_pcm_oss snd_mixer_oss snd_ens1371 gameport snd_rawmidi snd_seq_device snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore af_packet floppy ide_cd cdrom loop aes dm_crypt nls_iso8859_1 nls_cp850 vfat fat reiser4 reiserfs via_agp agpgart video joydev ohci1394 ieee1394 usbhid uhci_hcd usbcore dm_mirror dm_mod via82cxxx CPU: 0 EIP: 0060:[<c0111c9b>] Not tainted VLI EFLAGS: 00010046 (2.6.17-rc5-mm1-lockdep #13)
EIP is at do_page_fault+0x45e/0x5bc
eax: ff383965 ebx: ff384345 ecx: c0116a48 edx: d8cad000
esi: 00000000 edi: c02ad73c ebp: d882703c esp: d8827004
ds: 007b es: 007b ss: 0068
Process % (pid: 34, threadinfo=d8826000 task=d8cad000)
Stack: 00000000 d8827044 ff383965 ff383965 ff384345 ff383965 d8827044 c02ad69b
00000000 0000000e 0000000b 00000096 d8827000 c011183d d882708c c010340d
00000096 00000000 00000000 d8827000 00000000 d882708c ff383965 0000007b
Call Trace:
[<c010340d>] error_code+0x39/0x40
Code: e6 00 f0 ff ff 81 e3 00 f0 3f 00 89 d8 c1 e8 0c ff b4 86 00 00 00 c0 68 4d d7 2a c0 e8 a1 53 00 00 59 5e eb 03 8b 5d d8 8b 45 d0 <89> 98 00 02 00 00 c7 80 04 02 00 00 0e 00 00 00 8b 55 c8 89 90
EIP: [<c0111c9b>] do_page_fault+0x45e/0x5bc SS:ESP 0068:d8827004
<0>Kernel panic - not syncing: Fatal exception in interrupt
<0>------------[ cut here ]------------
kernel BUG at kernel/posix-cpu-timers.c:1292!
invalid opcode: 0000 [#2]
last sysfs file: /block/pktcdvd0/removable
Modules linked in: pktcdvd lp parport_pc parport snd_pcm_oss snd_mixer_oss snd_ens1371 gameport snd_rawmidi snd_seq_device snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore af_packet floppy ide_cd cdrom loop aes dm_crypt nls_iso8859_1 nls_cp850 vfat fat reiser4 reiserfs via_agp agpgart video joydev ohci1394 ieee1394 usbhid uhci_hcd usbcore dm_mirror dm_mod via82cxxx
CPU: 0
EIP: 0060:[<c01286c5>] Not tainted VLI
EFLAGS: 00010002 (2.6.17-rc5-mm1-lockdep #13) EIP is at run_posix_cpu_timers+0x91/0x6a2
eax: b7e68000 ebx: d8cad000 ecx: d8cad000 edx: df434aa0
esi: d8cad000 edi: 00000000 ebp: c03f3fa4 esp: c03f3f4c
ds: 007b es: 007b ss: 0068
Process % (pid: 34, threadinfo=c03f3000 task=d8cad000)
Stack: c011e997 00000000 00000000 c02ebc30 d8cad000 00000000 00000001 000037ef
00000000 00000000 00000000 000008d8 d8cad000 00000000 c03f3fa4 c0112ddf
d8cad000 c03f3f90 c03f3f90 d8cad000 00000000 00000000 c03f3fb4 c011ede4
Call Trace:
[<c011ede4>] update_process_times+0x58/0x5c
[<c0105da0>] timer_interrupt+0x5e/0x96
[<c0138d28>] handle_IRQ_event+0x20/0x50
[<c0139cd4>] handle_level_irq+0x71/0xb9
[<c0104dc8>] do_IRQ+0x5c/0x7c
[<c0103305>] common_interrupt+0x25/0x2c
Code: 00 89 d1 09 c1 0f 84 29 06 00 00 39 57 54 0f 82 20 06 00 00 77 09 39 47 50 0f 82 15 06 00 00 8b 75 b8 83 be 90 00 00 00 00 74 08 <0f> 0b 0c 05 ad e9 2a c0 b8 00 6a 35 c0 be 14 00 00 00 e8 32 cf
EIP: [<c01286c5>] run_posix_cpu_timers+0x91/0x6a2 SS:ESP 0068:c03f3f4c
<0>Kernel panic - not syncing: Fatal exception in interrupt
BUG: warning at kernel/panic.c:138/panic()
[<c0103810>] show_trace_log_lvl+0x4b/0xf4
[<c0103e11>] show_trace+0xd/0x10
[<c0103e58>] dump_stack+0x19/0x1b
[<c0116768>] panic+0x14d/0x161
[<c0103d0d>] die+0x231/0x266
[<c0103dbe>] do_trap+0x7c/0x96
[<c010449f>] do_invalid_op+0x89/0x93
[<c010340d>] error_code+0x39/0x40SysRq : Emergency Sync
SysRq : Emergency Sync
SysRq : Emergency Remount R/O
SysRq : Emergency Sync
SysRq : Resetting
BUG: warning at drivers/pci/search.c:234/pci_get_subsys() [<c0103810>] show_trace_log_lvl+0x4b/0xf4 [<c0103e11>] show_trace+0xd/0x10 [<c0103e58>] dump_stack+0x19/0x1b [<c01ce8f0>] pci_get_subsys+0x41/0xca [<c01ce987>] pci_get_device+0xe/0x10 [<c010f4c1>] mach_reboot_fixups+0x15/0x21 [<c010d314>] machine_emergency_restart+0x23/0xdc [<c012287b>] emergency_restart+0x8/0xa [<c0220487>] sysrq_handle_reboot+0xe/0x10 [<c0220503>] __handle_sysrq+0x7a/0xf1 [<c022058d>] handle_sysrq+0x13/0x16 [<c021be47>] kbd_event+0x2b6/0x4c7 [<c0236b98>] input_event+0x401/0x424 [<c0239060>] atkbd_report_key+0x5e/0x7e [<c0239a3e>] atkbd_interrupt+0x41d/0x50b [<c0233d7e>] serio_interrupt+0x38/0x71 [<c0234b7e>] i8042_interrupt+0x1da/0x1ec [<c0138d28>] handle_IRQ_event+0x20/0x50 [<c0139cd4>] handle_level_irq+0x71/0xb9 [<c0104dd7>] do_IRQ+0x6b/0x7c [<c0103305>] common_interrupt+0x25/0x2c
Linux version 2.6.17-rc4-mm3 ([email protected]) (gcc version 4.1.1 20060330 (prerelease)) #10 Tue May 23 01:35:36 CEST 2006
Any idea ? Or is time to do a bissection ?
~~
laurent
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.17-rc5-mm1-lockdep
# Wed May 31 07:26:20 2006
#CONFIG_X86_32=yCONFIG_GENERIC_TIME=yCONFIG_SEMAPHORE_SLEEPERS=yCONFIG_X86=yCONFIG_MMU=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SWAP_PREFETCH=yCONFIG_SYSVIPC=yCONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not setCONFIG_SYSCTL=y
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not setCONFIG_INITRAMFS_SOURCE=""CONFIG_KLIBC_ERRLIST=yCONFIG_KLIBC_ZLIB=yCONFIG_UID16=yCONFIG_VM86=yCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_EMBEDDED=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_RT_MUTEXES=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
# CONFIG_SMP is not setCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not setCONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_USE_3DNOW=yCONFIG_X86_TSC=yCONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_X86_UP_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=mCONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not setCONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not setCONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not setCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not setCONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_ALIGNED_ZONE_BOUNDARIES=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_UNALIGNED_ZONE_BOUNDARIES is not setCONFIG_ADAPTIVE_READAHEAD=yCONFIG_DEBUG_READAHEAD=yCONFIG_READAHEAD_SMOOTH_AGING=y
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
# CONFIG_EFI is not setCONFIG_REGPARM=yCONFIG_SECCOMP=y
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_KEXEC=yCONFIG_PHYSICAL_START=0x100000
# CONFIG_RESOURCES_32BIT is not set
# CONFIG_COMPAT_VDSO is not set
#
# Power management options (ACPI, APM)
#CONFIG_PM=yCONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not setCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION="/dev/hdb6"
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set CONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=mCONFIG_ACPI_HOTKEY=mCONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_ATLAS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set CONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=yCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not setCONFIG_ISA_DMA_API=yCONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=mCONFIG_BINFMT_MISC=m
#
# Networking
#CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not setCONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not setCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=m
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not setCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not setCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not setCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not setCONFIG_IP_NF_FTP=mCONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not setCONFIG_IP_NF_TFTP=mCONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not setCONFIG_IP_NF_QUEUE=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#CONFIG_NET_SCHED=yCONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not setCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not setCONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not setCONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=mCONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not setCONFIG_BLK_DEV_UB=mCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_INITRD=yCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_IDE_MAX_HWIFS=2CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=m
# CONFIG_SCSI_TGT is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_DOMAIN_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#CONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not setCONFIG_BLK_DEV_DM=mCONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not setCONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not setCONFIG_IEEE1394_OUI_DB=y
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not setCONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not setCONFIG_IEEE1394_DV1394=mCONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#CONFIG_NETDEVICES=yCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not setCONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not setCONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#CONFIG_NET_RADIO=y
# CONFIG_NET_WIRELESS_RTNETLINK is not set
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support #CONFIG_PRISM54=m
# CONFIG_HOSTAP is not set
# CONFIG_ACX is not set CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not setCONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not setCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not setCONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not setCONFIG_NETCONSOLE=yCONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_PCI is not setCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not setCONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not setCONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not setCONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not setCONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not setCONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not setCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_OCORES is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#CONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not setCONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not setCONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT8231 is not setCONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not setCONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_CX88 is not set
#
# Encoders and Decoders
#
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_CX25840 is not set
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
#
# V4L USB devices
#
# CONFIG_USB_QUICKCAM_MESSENGER is not set
#
# Radio Adapters
#
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#CONFIG_FIRMWARE_EDID=yCONFIG_FB=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not setCONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not setCONFIG_FB_NVIDIA=mCONFIG_FB_NVIDIA_I2C=yCONFIG_FB_RIVA=mCONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not setCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#CONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#CONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_RAWMIDI=mCONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not setCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=mCONFIG_SND_SEQ_RTCTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_AC97_CODEC=mCONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not setCONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_BANDWIDTH=yCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not setCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not setCONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not setCONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#CONFIG_USB_HID=mCONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #CONFIG_EDAC=m
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=mCONFIG_EDAC_AMD76X=mCONFIG_EDAC_E7XXX=m
# CONFIG_EDAC_E752X is not setCONFIG_EDAC_I82875P=m
# CONFIG_EDAC_I82860 is not setCONFIG_EDAC_R82600=mCONFIG_EDAC_POLL=y
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#CONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not setCONFIG_EXT2_FS_XIP=yCONFIG_FS_XIP=yCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISER4_FS=mCONFIG_REISER4_DEBUG=yCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not setCONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=y
# CONFIG_ZISOFS is not setCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=850CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=yCONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#CONFIG_NFS_FS=mCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not setCONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not setCONFIG_NFSD=mCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not setCONFIG_NFSD_V4=yCONFIG_NFSD_TCP=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not setCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=mCONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DEBUG_KERNEL=yCONFIG_LOG_BUF_SHIFT=15CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not setCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_MUTEX_ALLOC=yCONFIG_DEBUG_MUTEX_DEADLOCKS=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not setCONFIG_PROVE_SPIN_LOCKING=yCONFIG_PROVE_RW_LOCKING=yCONFIG_PROVE_MUTEX_LOCKING=yCONFIG_PROVE_RWSEM_LOCKING=yCONFIG_LOCKDEP=yCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not setCONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not setCONFIG_FRAME_POINTER=yCONFIG_UNWIND_INFO=yCONFIG_STACK_UNWIND=yCONFIG_FORCED_INLINING=y
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set
# CONFIG_KGDB is not setCONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not setCONFIG_STACK_BACKTRACE_COLS=1
#
# Page alloc debug is incompatible with Software Suspend on i386 #CONFIG_DEBUG_RODATA=yCONFIG_4KSTACKS=yCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=yCONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not setCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not setCONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not setCONFIG_CRC32=yCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=mCONFIG_ZLIB_DEFLATE=mCONFIG_PLIST=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_X86_BIOS_REBOOT=yCONFIG_KTIME_SCALAR=y
Linux version 2.6.17-rc5-mm1-lockdep ([email protected]) (gcc version 4.1.1 20060330 (prerelease)) #13 Wed May 31 19:02:46 CEST 2006 BIOS-provided physical RAM map:
sanitize start
sanitize endcopy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1copy_e820_map() type is E820_RAMadd_memory_region(0000000000000000, 000000000009fc00, 1)copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2add_memory_region(000000000009fc00, 0000000000000400, 2)copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2add_memory_region(00000000000f0000, 0000000000010000, 2)copy_e820_map() start: 0000000000100000 size: 000000001feec000 end: 000000001ffec000 type: 1copy_e820_map() type is E820_RAMadd_memory_region(0000000000100000, 000000001feec000, 1)copy_e820_map() start: 000000001ffec000 size: 0000000000003000 end: 000000001ffef000 type: 3add_memory_region(000000001ffec000, 0000000000003000, 3)copy_e820_map() start: 000000001ffef000 size: 0000000000010000 end: 000000001ffff000 type: 2add_memory_region(000000001ffef000, 0000000000010000, 2)copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4add_memory_region(000000001ffff000, 0000000000001000, 4)copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2add_memory_region(00000000ffff0000, 0000000000010000, 2)
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
DMI 2.3 present.
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
Detected 1410.384 MHz processor.
Built 1 zonelists
Kernel command line: root=/dev/vglinux1/lvroot video=vesafb:ywrap,mtrr splash=silent resume=/dev/hdb6 [email protected]/,@192.168.0.1/00:0E:9B:91:ED:72
netconsole: local port 6665
netconsole: local IP 192.163.0.3
netconsole: interface eth0
netconsole: remote port 6666
netconsole: remote IP 192.168.0.1
netconsole: remote ethernet address 00:0e:9b:91:ed:72
Local APIC disabled by BIOS -- you can enable it with "lapic"
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c03f3000 soft=c03f2000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBTYPES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... TYPEHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 8192 ... CHAINHASH_SIZE: 4096
memory used by lock dependency info: 696 kB
per task-struct memory footprint: 1080 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
--------------------------------------------------------------------------
non-nested unlock: ok | ok | ok | ok |
------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |-------------------------------------------------------
Good, all 210 testcases passed! |
---------------------------------
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514440k/524208k available (1626k kernel code, 9256k reserved, 798k data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2824.23 BogoMIPS (lpj=5648475)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(TM) XP 1600+ stepping 02
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 0k freed
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0005) - 356 Objects with 38 Devices 115 Methods 24 Regions
ACPI Namespace successfully loaded at root c0549050
ACPI: setting ELCR to 0200 (from 0c20)
evxfevnt-0089 [02] enable : Transition to ACPI mode successful
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 230k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060310
evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:....................................................... Initialized 23/24 Regions 2/2 Fields 19/19 Buffers 11/14 Packages (365 nodes)
Executing all Device _STA and_INI methods:.........................................
41 Devices found - executed 0 _STA, 0 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region e200-e27f claimed by vt82c686 HW-mon
PCI quirk: region e800-e80f claimed by vt82c686 SMB
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: c6000000-c7efffff
PREFETCH window: c7f00000-cfffffff
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 8, 1376256 bytes)
TCP bind hash table entries: 8192 (order: 7, 720896 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x3a set to 0x1
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 16 throttling states)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL-8029 found at 0xa400, IRQ 10, 00:40:95:46:6E:2D.
netconsole: device eth0 not up yet, forcing it
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
netconsole: network logging started
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
ACPI: (supports S0 S1 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 176k freed
Write protecting the kernel read-only data: 301k
Time: acpi_pm clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0VP_IDE: IDE controller at PCI slot 0000:00:04.1
ACPI (acpi_bus-0192): Device `IDE0]is not power manageable [20060310]VP_IDE: chipset revision 6VP_IDE: not 100% native mode: will probe irqs laterVP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMAinput: ImExPS/2 Generic Explorer Mouse as /class/input/input1
hda: ST340016A, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 >
hdc: HL-DT-ST DVDRAM GSA-4165B, ATAPI CD/DVD-ROM drive
hdd: CD-950E/AKU, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [email protected] Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {hardirq-on-W} -> {in-hardirq-W} usage. events/0/4 [HC1[1]:SC0[0]:HE0:SE1] takes:
(&list->lock){+...}, at: [<c0247619>] skb_dequeue+0x12/0x43
{hardirq-on-W} state was registered at:
[<c012d269>] lockdep_acquire+0x56/0x6f [<c02958eb>] _spin_lock_bh+0x1c/0x29 [<c0292270>] unix_stream_connect+0x2d8/0x3a7 [<c0243f44>] sys_connect+0x54/0x71 [<c0244bec>] sys_socketcall+0x6f/0x166 [<c0295a8d>] sysenter_past_esp+0x56/0x8d irq event stamp: 402 hardirqs last enabled at (401): [<c02959bb>] _spin_unlock_irqrestore+0x35/0x3b hardirqs last disabled at (402): [<c01032fb>] common_interrupt+0x1b/0x2c softirqs last enabled at (0): [<c0114af0>] copy_process+0x265/0x11dc softirqs last disabled at (0): [<00000000>] 0x0
other info that might help us debug this:
no locks held by events/0/4.
stack backtrace: [<c0103810>] show_trace_log_lvl+0x4b/0xf4 [<c0103e11>] show_trace+0xd/0x10 [<c0103e58>] dump_stack+0x19/0x1b [<c012b886>] print_usage_bug+0x1a4/0x1ae [<c012c38e>] mark_lock+0x8a/0x411 [<c012cc1d>] __lockdep_acquire+0x302/0x8f8 [<c012d269>] lockdep_acquire+0x56/0x6f [<c0295896>] _spin_lock_irqsave+0x20/0x2f [<c0247619>] skb_dequeue+0x12/0x43 [<e08d27ac>] hpsb_bus_reset+0x55/0xa2 [ieee1394] [<e087be72>] ohci_irq_handler+0x322/0x6c9 [ohci1394] [<c0138d28>] handle_IRQ_event+0x20/0x50 [<c0139cd4>] handle_level_irq+0x71/0xb9 [<c0104dc8>] do_IRQ+0x5c/0x7c [<c0103305>] common_interrupt+0x25/0x2c
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0120e085ca]
Using specific hotkey driver
EXT3 FS on dm-4, internal journal
Adding 257000k swap on /dev/hdb6. Priority:1 extents:1 across:257000k
Adding 64220k swap on /dev/hda5. Priority:2 extents:1 across:64220k
Adding 795208k swap on /dev/hdb7. Priority:2 extents:1 across:795208k
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 256M @ 0xd0000000
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
Loading Reiser4. See www.namesys.com for a description of Reiser4.ps_hash_table: 32 bucketsd_cursor_hash_table: 256 bucketsz_hash_table: 8192 bucketsz_hash_table: 8192 bucketsj_hash_table: 16384 buckets
loading reiser4 bitmap......done (16 jiffies)
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: dm-6: found reiserfs format "3.6" with standard journal
ReiserFS: dm-6: using ordered data mode
ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-6: checking transaction log (dm-6)
ReiserFS: dm-6: Using r5 hash to sort names
loop: loaded (max 8 devices)
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
hda: cache flushes not supported
Using specific hotkey driver
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17parport_pc: VIA 686A/8231 detectedparport_pc: probing current configurationparport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 710Cparport_pc: VIA parallel port: io=0x378, irq=7
lp0: using parport0 (interrupt-driven).
cdrom: This disc doesn't have any tracks I recognize!
pktcdvd: writer pktcdvd0 mapped to hdc
BUG: unable to handle kernel paging request at virtual address ff384345 printing eip: c012d237 *pde = 00000000 BUG: unable to handle kernel paging request at virtual address ff383b65 printing eip: c0111c9b *pde = 00000000 Oops: 0002 [#1] last sysfs file: /block/pktcdvd0/removable Modules linked in: pktcdvd lp parport_pc parport snd_pcm_oss snd_mixer_oss snd_ens1371 gameport snd_rawmidi snd_seq_device snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore af_packet floppy ide_cd cdrom loop aes dm_crypt nls_iso8859_1 nls_cp850 vfat fat reiser4 reiserfs via_agp agpgart video joydev ohci1394 ieee1394 usbhid uhci_hcd usbcore dm_mirror dm_mod via82cxxx CPU: 0 EIP: 0060:[<c0111c9b>] Not tainted VLI EFLAGS: 00010046 (2.6.17-rc5-mm1-lockdep #13)
EIP is at do_page_fault+0x45e/0x5bc
eax: ff383965 ebx: ff384345 ecx: c0116a48 edx: d8cad000
esi: 00000000 edi: c02ad73c ebp: d882703c esp: d8827004
ds: 007b es: 007b ss: 0068
Process % (pid: 34, threadinfo=d8826000 task=d8cad000)
Stack: 00000000 d8827044 ff383965 ff383965 ff384345 ff383965 d8827044 c02ad69b
00000000 0000000e 0000000b 00000096 d8827000 c011183d d882708c c010340d
00000096 00000000 00000000 d8827000 00000000 d882708c ff383965 0000007b
Call Trace:
[<c010340d>] error_code+0x39/0x40
Code: e6 00 f0 ff ff 81 e3 00 f0 3f 00 89 d8 c1 e8 0c ff b4 86 00 00 00 c0 68 4d d7 2a c0 e8 a1 53 00 00 59 5e eb 03 8b 5d d8 8b 45 d0 <89> 98 00 02 00 00 c7 80 04 02 00 00 0e 00 00 00 8b 55 c8 89 90
EIP: [<c0111c9b>] do_page_fault+0x45e/0x5bc SS:ESP 0068:d8827004
<0>Kernel panic - not syncing: Fatal exception in interrupt
<0>------------[ cut here ]------------
kernel BUG at kernel/posix-cpu-timers.c:1292!
invalid opcode: 0000 [#2]
last sysfs file: /block/pktcdvd0/removable
Modules linked in: pktcdvd lp parport_pc parport snd_pcm_oss snd_mixer_oss snd_ens1371 gameport snd_rawmidi snd_seq_device snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore af_packet floppy ide_cd cdrom loop aes dm_crypt nls_iso8859_1 nls_cp850 vfat fat reiser4 reiserfs via_agp agpgart video joydev ohci1394 ieee1394 usbhid uhci_hcd usbcore dm_mirror dm_mod via82cxxx
CPU: 0
EIP: 0060:[<c01286c5>] Not tainted VLI
EFLAGS: 00010002 (2.6.17-rc5-mm1-lockdep #13) EIP is at run_posix_cpu_timers+0x91/0x6a2
eax: b7e68000 ebx: d8cad000 ecx: d8cad000 edx: df434aa0
esi: d8cad000 edi: 00000000 ebp: c03f3fa4 esp: c03f3f4c
ds: 007b es: 007b ss: 0068
Process % (pid: 34, threadinfo=c03f3000 task=d8cad000)
Stack: c011e997 00000000 00000000 c02ebc30 d8cad000 00000000 00000001 000037ef
00000000 00000000 00000000 000008d8 d8cad000 00000000 c03f3fa4 c0112ddf
d8cad000 c03f3f90 c03f3f90 d8cad000 00000000 00000000 c03f3fb4 c011ede4
Call Trace:
[<c011ede4>] update_process_times+0x58/0x5c
[<c0105da0>] timer_interrupt+0x5e/0x96
[<c0138d28>] handle_IRQ_event+0x20/0x50
[<c0139cd4>] handle_level_irq+0x71/0xb9
[<c0104dc8>] do_IRQ+0x5c/0x7c
[<c0103305>] common_interrupt+0x25/0x2c
Code: 00 89 d1 09 c1 0f 84 29 06 00 00 39 57 54 0f 82 20 06 00 00 77 09 39 47 50 0f 82 15 06 00 00 8b 75 b8 83 be 90 00 00 00 00 74 08 <0f> 0b 0c 05 ad e9 2a c0 b8 00 6a 35 c0 be 14 00 00 00 e8 32 cf
EIP: [<c01286c5>] run_posix_cpu_timers+0x91/0x6a2 SS:ESP 0068:c03f3f4c
<0>Kernel panic - not syncing: Fatal exception in interrupt
BUG: warning at kernel/panic.c:138/panic()
[<c0103810>] show_trace_log_lvl+0x4b/0xf4
[<c0103e11>] show_trace+0xd/0x10
[<c0103e58>] dump_stack+0x19/0x1b
[<c0116768>] panic+0x14d/0x161
[<c0103d0d>] die+0x231/0x266
[<c0103dbe>] do_trap+0x7c/0x96
[<c010449f>] do_invalid_op+0x89/0x93
[<c010340d>] error_code+0x39/0x40SysRq : Emergency Sync
SysRq : Emergency Sync
SysRq : Emergency Remount R/O
SysRq : Emergency Sync
SysRq : Resetting
BUG: warning at drivers/pci/search.c:234/pci_get_subsys() [<c0103810>] show_trace_log_lvl+0x4b/0xf4 [<c0103e11>] show_trace+0xd/0x10 [<c0103e58>] dump_stack+0x19/0x1b [<c01ce8f0>] pci_get_subsys+0x41/0xca [<c01ce987>] pci_get_device+0xe/0x10 [<c010f4c1>] mach_reboot_fixups+0x15/0x21 [<c010d314>] machine_emergency_restart+0x23/0xdc [<c012287b>] emergency_restart+0x8/0xa [<c0220487>] sysrq_handle_reboot+0xe/0x10 [<c0220503>] __handle_sysrq+0x7a/0xf1 [<c022058d>] handle_sysrq+0x13/0x16 [<c021be47>] kbd_event+0x2b6/0x4c7 [<c0236b98>] input_event+0x401/0x424 [<c0239060>] atkbd_report_key+0x5e/0x7e [<c0239a3e>] atkbd_interrupt+0x41d/0x50b [<c0233d7e>] serio_interrupt+0x38/0x71 [<c0234b7e>] i8042_interrupt+0x1da/0x1ec [<c0138d28>] handle_IRQ_event+0x20/0x50 [<c0139cd4>] handle_level_irq+0x71/0xb9 [<c0104dd7>] do_IRQ+0x6b/0x7c [<c0103305>] common_interrupt+0x25/0x2c
Quoted 36 lines · On Wed, 31 May 2006 19:39:31 +0200 Laurent Riffard <[email protected]>…
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
Hello, I've got this nice BUG:
pktcdvd: writer pktcdvd0 mapped to hdc
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000084 printing eip: c01118f1 *pde = 00000000 Oops: 0000 [#1] last sysfs file: /block/pktcdvd0/removable Modules linked in: pktcdvd lp parport_pc parport snd_pcm_oss snd_mixer_oss snd_ens1371 gameport snd_rawmidi snd_seq_device snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore af_packet floppy ide_cd cdrom loop aes dm_crypt nls_iso8859_1 nls_cp850 vfat fat reiser4 reiserfs via_agp agpgart video joydev ohci1394 usbhid ieee1394 uhci_hcd usbcore dm_mirror dm_mod via82cxxx CPU: 0 EIP: 0060:[<c01118f1>] Not tainted VLI EFLAGS: 00010006 (2.6.17-rc5-mm1 #11)EIP is at
do_page_fault+0xb4/0x5bc
eax:d6750084ebx:d6750000ecx:0000007bedx: 00000000
esi:d6758000edi:c011183debp:d675007cesp:d6750044
ds: 007b es: 007b ss: 0068
Process (pid: 0, threadinfo=d674f000 task=d657c000)Stack: 00000000 d6750084 00000000 00000049 00000084 00000000 00001e2e 02001120 00000027 00000022 00000055 d6750000 d6758000 c011183d d67500f0 c010340d d6750000 0000007b 00000000 d6758000 c011183d d67500f0 d67500f8 0000007b Call Trace: [<c010340d>] error_code+0x39/0x40 Code: 00 00 c0 81 0f 84 12 02 00 00 e9 1c 05 00 00 8b 45 cc f7 40 30 00 02 02 00 74 06 e8 68 af 01 00 fb f7 43 14 ff ff ff ef 8b 55 d0 <8b> b2 84 00 00 00 0f 85 e5 01 00 00 85 f6 0f 84 dd 01 00 00 8d EIP: [<c01118f1>] do_page_fault+0xb4/0x5bc SS:ESP 0068:d6750044 <0>Kernel panic - not syncing: Fatal exception in interrupt BUG: warning at kernel/panic.c:138/panic() [<c0103810>] show_trace_log_lvl+0x4b/0xf4 [<c0103e11>] show_trace+0xd/0x10 [<c0103e58>] dump_stack+0x19/0x1b [<c0116768>] panic+0x14d/0x161 [<c0103d0d>] die+0x231/0x266 [<c0111cc3>] do_page_fault+0x486/0x5bc
Quoted 5 lines
SysRq : Emergency Sync
SysRq : Emergency Sync
SysRq : Emergency Remount R/O
SysRq : Emergency Sync
SysRq : Resetting
What a mess.
Your .config worked OK here. There's probably not a lot of point in you persisting with rc5-mm1. Please test next -mm and if that has the same bug then yes please, a bisection search would be great.
Quoted 37 lines · Laurent Riffard
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
Hello, I've got this nice BUG:
pktcdvd: writer pktcdvd0 mapped to hdc
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000084 printing eip: c01118f1 *pde = 00000000 Oops: 0000 [#1] last sysfs file: /block/pktcdvd0/removable Modules linked in: pktcdvd lp parport_pc parport snd_pcm_oss snd_mixer_oss snd_ens1371 gameport snd_rawmidi snd_seq_device snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd soundcore af_packet floppy ide_cd cdrom loop aes dm_crypt nls_iso8859_1 nls_cp850 vfat fat reiser4 reiserfs via_agp agpgart video joydev ohci1394 usbhid ieee1394 uhci_hcd usbcore dm_mirror dm_mod via82cxxx CPU: 0 EIP: 0060:[<c01118f1>] Not tainted VLI EFLAGS: 00010006 (2.6.17-rc5-mm1 #11)EIP is at
do_page_fault+0xb4/0x5bc
eax:d6750084ebx:d6750000ecx:0000007bedx: 00000000
esi:d6758000edi:c011183debp:d675007cesp:d6750044
ds: 007b es: 007b ss: 0068
Process (pid: 0, threadinfo=d674f000 task=d657c000)Stack: 00000000 d6750084 00000000 00000049 00000084 00000000 00001e2e 02001120 00000027 00000022 00000055 d6750000 d6758000 c011183d d67500f0 c010340d d6750000 0000007b 00000000 d6758000 c011183d d67500f0 d67500f8 0000007b Call Trace: [<c010340d>] error_code+0x39/0x40 Code: 00 00 c0 81 0f 84 12 02 00 00 e9 1c 05 00 00 8b 45 cc f7 40 30 00 02 02 00 74 06 e8 68 af 01 00 fb f7 43 14 ff ff ff ef 8b 55 d0 <8b> b2 84 00 00 00 0f 85 e5 01 00 00 85 f6 0f 84 dd 01 00 00 8d EIP: [<c01118f1>] do_page_fault+0xb4/0x5bc SS:ESP 0068:d6750044 <0>Kernel panic - not syncing: Fatal exception in interrupt BUG: warning at kernel/panic.c:138/panic() [<c0103810>] show_trace_log_lvl+0x4b/0xf4 [<c0103e11>] show_trace+0xd/0x10 [<c0103e58>] dump_stack+0x19/0x1b [<c0116768>] panic+0x14d/0x161 [<c0103d0d>] die+0x231/0x266 [<c0111cc3>] do_page_fault+0x486/0x5bc
Quoted 1 line
SysRq : Emergency Sync
Jan, this stack trace looks wrong. We have no information which tells us how we entered the pagefault handler. Userspace hasn't started up yet, so we probably entered the fault handler from the kernel. But that info has been lost.
Quoted 34 lines
Quoted 1 line
Quoted 1 line
Andrew Morton <[email protected]> 02.06.06 00:07 >>>
Quoted 6 lines · Laurent Riffard
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
Hello, I've got this nice BUG:
Quoted 8 lines
pktcdvd: writer pktcdvd0 mapped to hdc
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000084 printing eip: c01118f1 *pde = 00000000 Oops: 0000 [#1] last sysfs file: /block/pktcdvd0/removable Modules linked in: pktcdvd lp parport_pc parport snd_pcm_oss snd_mixer_oss snd_ens1371 gameport snd_rawmidi snd_seq_device
snd_ac97_codecsnd_ac97_bussnd_pcmsnd_timersnd_page_allocsnd soundcoreaf_packetfloppyide_cdcdrom loop aesdm_cryptnls_iso8859_1nls_cp850vfat fat reiser4 reiserfsvia_agpagpgart video joydev ohci1394 usbhid ieee1394uhci_hcdusbcoredm_mirrordm_modvia82cxxxQuoted 8 lines
CPU: 0 EIP: 0060:[<c01118f1>] Not tainted VLI EFLAGS: 00010006 (2.6.17-rc5-mm1 #11)EIP is at
do_page_fault+0xb4/0x5bc
eax:d6750084ebx:d6750000ecx:0000007bedx: 00000000
esi:d6758000edi:c011183debp:d675007cesp:d6750044
ds: 007b es: 007b ss: 0068
Process (pid: 0, threadinfo=d674f000 task=d657c000)Quoted 6 lines
Stack: 00000000 d6750084 00000000 00000049 00000084 00000000 00001e2e 02001120 00000027 00000022 00000055 d6750000 d6758000 c011183d d67500f0 c010340d d6750000 0000007b 00000000 d6758000 c011183d d67500f0 d67500f8 0000007b Call Trace: [<c010340d>] error_code+0x39/0x40 Code: 00 00 c0 81 0f 84 12 02 00 00 e9 1c 05 00 00 8b 45 cc f7 40 30 00 02 02 00 74 06 e8 68 af 01 00 fb f7 43 14 ff ff ff ef8b 55 d0 <8b> b2 84 00 00 00 0f 85 e5 01 00 00 85 f6 0f 84 dd 01 00 00 8d
Quoted 8 lines
Quoted 2 lines
EIP: [<
c01118f1>]do_page_fault+0xb4/0x5bcSS:ESP 0068:d6750044
<0>Kernel panic - not syncing: Fatal exception in interrupt...
Jan, this stack trace looks wrong. We have no information which tells us how we entered the pagefault handler. Userspace hasn't started up yet, so we probably entered the fault handler from the kernel. But that info has been lost.
I agree that the trace is incomplete, but I'm not certain (without seeing at least twice as much of the raw stack) whether the unwinder is to blame here. After all, looking at the registers, the stack was already overflowed at the point the (nested) exception was taken, so there is no way to know whether the stack contents can actually be relied upon.
Jan
Quoted 2 lines · On Tue, 30 May 2006 02:29:25 -0700 Andrew Morton wrote:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
Some odd panic, reproducible. .config attached. Machine is Pentium-D with 2 GB RAM and SATA drives.
[ 0.000000] Bootdata ok (command line is root=/dev/sda7 vga=0x31a psmouse.proto=imps selinux=0 resume=/dev/sda2 splash=silent debug console=ttyS0,57600n8 [email protected]/eth0,[email protected]/00:14:22:d9:67:60 console=ttyUSB0,57600n8r console=tty1 initcall_debug) [ 0.000000] Linux version 2.6.17-rc5-mm1 (rddunlap@midway) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 SMP Wed May 31 15:14:19 PDT 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f664000 (usable) [ 0.000000] BIOS-e820: 000000007f664000 - 000000007f6e9000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6e9000 - 000000007f6ed000 (usable) [ 0.000000] BIOS-e820: 000000007f6ed000 - 000000007f6ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable) [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020 [ 0.000000] ACPI: RSDT (v001 INTEL D945GNT 0x000009b7 MSFT 0x01000013) @ 0x000000007f6fde48 [ 0.000000] ACPI: FADT (v001 INTEL D945GNT 0x000009b7 MSFT 0x01000013) @ 0x000000007f6fcf10 [ 0.000000] ACPI: MADT (v001 INTEL D945GNT 0x000009b7 MSFT 0x01000013) @ 0x000000007f6fce10 [ 0.000000] ACPI: WDDT (v001 INTEL D945GNT 0x000009b7 MSFT 0x01000013) @ 0x000000007f6f7f90 [ 0.000000] ACPI: MCFG (v001 INTEL D945GNT 0x000009b7 MSFT 0x01000013) @ 0x000000007f6f7f10 [ 0.000000] ACPI: ASF! (v032 INTEL D945GNT 0x000009b7 MSFT 0x01000013) @ 0x000000007f6fcd10 [ 0.000000] ACPI: SSDT (v001 INTEL CpuPm 0x000009b7 MSFT 0x01000013) @ 0x000000007f6fdc10 [ 0.000000] ACPI: SSDT (v001 INTEL Cpu0Ist 0x000009b7 MSFT 0x01000013) @ 0x000000007f6fda10 [ 0.000000] ACPI: SSDT (v001 INTEL Cpu1Ist 0x000009b7 MSFT 0x01000013) @ 0x000000007f6fd810 [ 0.000000] ACPI: SSDT (v001 INTEL Cpu2Ist 0x000009b7 MSFT 0x01000013) @ 0x000000007f6fd610 [ 0.000000] ACPI: SSDT (v001 INTEL Cpu3Ist 0x000009b7 MSFT 0x01000013) @ 0x000000007f6fd410 [ 0.000000] ACPI: TCPA (v001 INTEL TIANO 0x00000002 MSFT 0x01000013) @ 0x000000007f6e6d90 [ 0.000000] ACPI: DSDT (v001 INTEL D945GNT 0x000009b7 MSFT 0x01000013) @ 0x0000000000000000 [ 0.000000] On node 0 totalpages: 512398 [ 0.000000] DMA zone: 2753 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 509645 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f700000:80900000) [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/sda7 vga=0x31a psmouse.proto=imps selinux=0 resume=/dev/sda2 splash=silent debug console=ttyS0,57600n8 [email protected]/eth0,[email protected]/00:14:22:d9:67:60 console=ttyUSB0,57600n8r console=tty1 initcall_debug [ 0.000000] netconsole: local port 6665 [ 0.000000] netconsole: local IP 192.168.0.101 [ 0.000000] netconsole: interface eth0 [ 0.000000] netconsole: remote port 6666 [ 0.000000] netconsole: remote IP 192.168.0.104 [ 0.000000] netconsole: remote ethernet address 00:14:22:d9:67:60 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 25.380581] Console: colour dummy device 80x25 [ 26.188250] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 26.204064] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 26.218420] Checking aperture... [ 26.247610] Memory: 2045964k/2087936k available (2767k kernel code, 40628k reserved, 1240k data, 224k init) [ 26.409571] Calibrating delay using timer specific routine.. 6004.26 BogoMIPS (lpj=30021346) [ 26.426565] Mount-cache hash table entries: 256 [ 26.435858] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 26.446262] CPU: L2 cache: 1024K [ 26.452679] using mwait in idle threads. [ 26.460479] CPU: Physical Processor ID: 0 [ 26.469735] CPU: Processor Core ID: 0 [ 26.477018] CPU0: Thermal monitoring enabled (TM1) [ 26.486560] Freeing SMP alternatives: 24k freed [ 26.497278] tbxface-0107 [01] load_tables : ACPI Tables successfully acquired [ 26.519875] Parsing all Control Methods: [ 26.527484] Table [DSDT](id 000A) - 528 Objects with 54 Devices 147 Methods 30 Regions [ 26.543798] Parsing all Control Methods: [ 26.551371] Table [SSDT](id 0004) - 10 Objects with 0 Devices 4 Methods 0 Regions [ 26.566731] Parsing all Control Methods: [ 26.574303] Table [SSDT](id 0005) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 26.589490] Parsing all Control Methods: [ 26.597054] Table [SSDT](id 0006) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 26.612238] Parsing all Control Methods: [ 26.619811] Table [SSDT](id 0007) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 26.634990] Parsing all Control Methods: [ 26.642565] Table [SSDT](id 0008) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 26.657639] ACPI Namespace successfully loaded at root ffffffff80529b20 [ 26.671579] evxfevnt-0089 [02] enable : Transition to ACPI mode successful [ 26.788186] Using local APIC timer interrupts. [ 26.830321] result 12500143 [ 26.835866] Detected 12.500 MHz APIC timer. [ 26.849668] Booting processor 1/2 APIC 0x1 [ 26.868194] Initializing CPU#1 [ 27.018978] Calibrating delay using timer specific routine.. 6000.09 BogoMIPS (lpj=30000493) [ 27.018990] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 27.018993] CPU: L2 cache: 1024K [ 27.018996] CPU: Physical Processor ID: 0 [ 27.018997] CPU: Processor Core ID: 1 [ 27.019007] CPU1: Thermal monitoring enabled (TM1) [ 27.019245] Intel(R) Pentium(R) D CPU 3.00GHz stepping 04 [ 27.028976] APIC error on CPU1: 00(40) [ 27.028993] Brought up 2 CPUs [ 27.119902] testing NMI watchdog ... OK. [ 27.227673] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 27.239966] time.c: Detected 3000.048 MHz processor. [ 27.439186] migration_cost=399 [ 27.448014] Calling initcall 0xffffffff80559ef0: cpufreq_tsc+0x0/0x6d() [ 27.461208] Calling initcall 0xffffffff8055e129: init_smp_flush+0x0/0x58() [ 27.474906] Calling initcall 0xffffffff80564a7a: init_elf32_binfmt+0x0/0x12() [ 27.490550] Calling initcall 0xffffffff8056619b: helper_init+0x0/0x2f() [ 27.503750] Calling initcall 0xffffffff80566423: pm_init+0x0/0x29() [ 27.516247] Calling initcall 0xffffffff805665f7: ksysfs_init+0x0/0x29() [ 27.529439] Calling initcall 0xffffffff8056854c: filelock_init+0x0/0x31() [ 27.542986] Calling initcall 0xffffffff80568dd6: init_misc_binfmt+0x0/0x3c() [ 27.557030] Calling initcall 0xffffffff80568e12: init_script_binfmt+0x0/0x12() [ 27.571420] Calling initcall 0xffffffff80568e24: init_elf_binfmt+0x0/0x12() [ 27.585287] Calling initcall 0xffffffff805698b1: debugfs_init+0x0/0x49() [ 27.598643] Calling initcall 0xffffffff80575ff8: sock_init+0x0/0x5a() [ 27.611538] Calling initcall 0xffffffff80576518: netlink_proto_init+0x0/0x17e() [ 27.626124] NET: Registered protocol family 16 [ 27.634977] Calling initcall 0xffffffff80569edc: kobject_uevent_init+0x0/0x3c() [ 27.649550] Calling initcall 0xffffffff8056a01a: pcibus_class_init+0x0/0x12() [ 27.663774] Calling initcall 0xffffffff8056a84c: pci_driver_init+0x0/0x12() [ 27.677662] Calling initcall 0xffffffff8056e08f: tty_class_init+0x0/0x2a() [ 27.691371] Calling initcall 0xffffffff8055d4dc: mtrr_if_init+0x0/0x74() [ 27.704724] Calling initcall 0xffffffff8056a9de: pci_acpi_init+0x0/0x2e() [ 27.718244] ACPI: bus type pci registered [ 27.726214] Calling initcall 0xffffffff8056c7e2: init_acpi_device_notify+0x0/0x4b() [ 27.741470] Calling initcall 0xffffffff80575356: pci_access_init+0x0/0x1c() [ 27.755338] PCI: BIOS Bug: MCFG area is not E820-reserved [ 27.766073] PCI: Not using MMCONFIG. [ 27.773181] PCI: Using configuration type 1 [ 27.781496] Calling initcall 0xffffffff8055d355: mtrr_init_finialize+0x0/0x34() [ 27.796057] Calling initcall 0xffffffff805636ef: topology_init+0x0/0x36() [ 27.809839] Calling initcall 0xffffffff80147401: pm_sysrq_init+0x0/0x1b() [ 27.823367] Calling initcall 0xffffffff80568325: init_bio+0x0/0x105() [ 27.836657] Calling initcall 0xffffffff80569d1b: genhd_device_init+0x0/0x33() [ 27.851014] Calling initcall 0xffffffff8056affd: fbmem_init+0x0/0x95() [ 27.864039] Calling initcall 0xffffffff8056c604: acpi_init+0x0/0x1de() [ 27.877042] ACPI: Subsystem revision 20060310 [ 27.886383] evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 27.905663] evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 1 Runtime GPEs in this block [ 27.926803] Completing Region/Field/Buffer/Package initialization:........................................................................... [ 27.956263] Initialized 29/30 Regions 0/0 Fields 22/22 Buffers 24/40 Packages (567 nodes) [ 27.972888] Executing all Device _STA and_INI methods:............................................................ [ 27.993929] 60 Devices found - executed 0 _STA, 1 _INI methods [ 28.007242] ACPI: Interpreter enabled [ 28.014520] ACPI: Using IOAPIC for interrupt routing [ 28.024484] Calling initcall 0xffffffff8056c94d: acpi_ec_init+0x0/0x63() [ 28.037838] Calling initcall 0xffffffff8056d20b: acpi_pci_root_init+0x0/0x28() [ 28.052229] Calling initcall 0xffffffff8056d320: acpi_pci_link_init+0x0/0x48() [ 28.066616] Calling initcall 0xffffffff8056d41b: acpi_power_init+0x0/0x77() [ 28.080488] Calling initcall 0xffffffff8056d5b2: acpi_system_init+0x0/0xc0() [ 28.094532] Calling initcall 0xffffffff8056d672: acpi_event_init+0x0/0x3d() [ 28.108402] Calling initcall 0xffffffff8056d6af: acpi_debug_init+0x0/0xa8() [ 28.122278] Calling initcall 0xffffffff8056d757: acpi_scan_init+0x0/0x18e() [ 28.137642] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 28.147173] PCI: Probing PCI hardware (bus 00) [ 28.156068] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 28.174188] Boot video device is 0000:00:02.0 [ 28.183647] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 28.196982] PCI: Transparent bridge - 0000:00:1e.0 [ 28.206591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 28.232605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 28.248331] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 28.262146] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 28.275964] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 28.289783] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 28.303588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 28.319674] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) [ 28.333481] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) [ 28.347286] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12) [ 28.365226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 28.379046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 28.392591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 28.406129] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 28.419669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 28.436624] Calling initcall 0xffffffff8056da5a: pnp_init+0x0/0x20() [ 28.449290] Linux Plug and Play Support v0.97 (c) Adam Belay [ 28.460568] Calling initcall 0xffffffff8056dbc9: pnpacpi_init+0x0/0x6a() [ 28.473918] pnp: PnP ACPI init [ 28.490943] pnp: PnP ACPI: found 13 devices [ 28.499259] Calling initcall 0xffffffff8056e6c3: misc_init+0x0/0x80() [ 28.513336] Calling initcall 0xffffffff80571b62: phy_init+0x0/0x2f() [ 28.526123] Generic PHY: Registered new driver [ 28.534959] Calling initcall 0xffffffff8057293b: init_scsi+0x0/0xd9() [ 28.548867] SCSI subsystem initialized [ 28.556319] Calling initcall 0xffffffff80572e4c: usb_init+0x0/0xd5() [ 28.569122] usbcore: registered new driver usbfs [ 28.578421] usbcore: registered new driver hub [ 28.587388] Calling initcall 0xffffffff805735d1: serio_init+0x0/0x9f() [ 28.600451] Calling initcall 0xffffffff80573969: gameport_init+0x0/0x89() [ 28.614028] Calling initcall 0xffffffff805739f2: input_init+0x0/0x122() [ 28.627228] Calling initcall 0xffffffff80573c66: i2c_init+0x0/0x32() [ 28.640018] Calling initcall 0xffffffff80575372: pci_acpi_init+0x0/0xab() [ 28.653543] PCI: Using ACPI for IRQ routing [ 28.661860] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 28.678305] Calling initcall 0xffffffff8057541d: pci_legacy_init+0x0/0x124() [ 28.692348] Calling initcall 0xffffffff805758ef: pcibios_irq_init+0x0/0x4a4() [ 28.706562] Calling initcall 0xffffffff80575d93: pcibios_init+0x0/0x69() [ 28.720004] Calling initcall 0xffffffff805760ad: proto_init+0x0/0x34() [ 28.733010] Calling initcall 0xffffffff80576210: net_dev_init+0x0/0x1cb() [ 28.746555] Calling initcall 0xffffffff80576696: genl_init+0x0/0xaf() [ 28.759407] Calling initcall 0xffffffff80559fef: late_hpet_init+0x0/0xd1() [ 28.773105] Calling initcall 0xffffffff8055ce79: pci_iommu_init+0x0/0x12() [ 28.786812] PCI-GART: No AMD northbridge found. [ 28.795820] Calling initcall 0xffffffff805684d6: init_pipe_fs+0x0/0x49() [ 28.809189] Calling initcall 0xffffffff8056d924: acpi_motherboard_init+0x0/0x136() [ 28.824329] Calling initcall 0xffffffff8056db5e: pnp_system_init+0x0/0x12() [ 28.838314] pnp: 00:06: ioport range 0x500-0x53f has been reserved [ 28.850610] pnp: 00:06: ioport range 0x400-0x47f could not be reserved [ 28.863596] pnp: 00:06: ioport range 0x680-0x6ff has been reserved [ 28.875901] Calling initcall 0xffffffff8056df93: chr_dev_init+0x0/0x8a() [ 28.890130] Calling initcall 0xffffffff80573e16: cpufreq_gov_performance_init+0x0/0x12() [ 28.906250] Calling initcall 0xffffffff80573e3a: cpufreq_gov_userspace_init+0x0/0x20() [ 28.922027] Calling initcall 0xffffffff80574e1a: pcibios_assign_resources+0x0/0x8b() [ 28.937476] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [ 28.949081] PCI: Bridge: 0000:00:1c.0 [ 28.956357] IO window: 1000-1fff [ 28.963118] MEM window: 90100000-901fffff [ 28.971435] PREFETCH window: disabled. [ 28.979236] PCI: Bridge: 0000:00:1c.2 [ 28.986509] IO window: disabled. [ 28.993271] MEM window: 90300000-903fffff [ 29.001587] PREFETCH window: disabled. [ 29.009385] PCI: Bridge: 0000:00:1c.3 [ 29.016658] IO window: disabled. [ 29.024810] MEM window: 90400000-904fffff [ 29.033127] PREFETCH window: disabled. [ 29.040926] PCI: Bridge: 0000:00:1c.4 [ 29.048202] IO window: disabled. [ 29.054961] MEM window: 90500000-905fffff [ 29.063277] PREFETCH window: disabled. [ 29.071074] PCI: Bridge: 0000:00:1c.5 [ 29.078350] IO window: disabled. [ 29.085109] MEM window: 90600000-906fffff [ 29.093424] PREFETCH window: disabled. [ 29.101223] PCI: Bridge: 0000:00:1e.0 [ 29.108498] IO window: disabled. [ 29.115258] MEM window: 90000000-900fffff [ 29.123573] PREFETCH window: disabled. [ 29.131388] ACPI (acpi_bus-0192): Device `PEX0]is not power manageable [20060310] [ 29.146298] GSI 16 sharing vector 0xA9 and IRQ 16 [ 29.155653] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 [ 29.170556] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 29.183037] ACPI (acpi_bus-0192): Device `PEX2]is not power manageable [20060310] [ 29.197947] GSI 17 sharing vector 0xB1 and IRQ 17 [ 29.207300] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177 [ 29.222200] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 29.234681] ACPI (acpi_bus-0192): Device `PEX3]is not power manageable [20060310] [ 29.249591] GSI 18 sharing vector 0xB9 and IRQ 18 [ 29.258942] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 [ 29.273841] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 29.286320] ACPI (acpi_bus-0192): Device `PEX4]is not power manageable [20060310] [ 29.301230] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169 [ 29.316128] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 29.328607] ACPI (acpi_bus-0192): Device `PEX5]is not power manageable [20060310] [ 29.343515] GSI 19 sharing vector 0xC1 and IRQ 19 [ 29.352868] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 193 [ 29.367767] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 29.380241] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 29.392709] Calling initcall 0xffffffff80577008: inet_init+0x0/0x331() [ 29.405796] NET: Registered protocol family 2 [ 29.508841] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 29.523569] TCP established hash table entries: 131072 (order: 10, 4194304 bytes) [ 29.541890] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 29.556348] TCP: Hash tables configured (established 131072 bind 65536) [ 29.569519] TCP reno registered [ 29.575845] Calling initcall 0xffffffff8010c770: time_init_device+0x0/0x22() [ 29.590030] Calling initcall 0xffffffff8055a51c: add_pcspkr+0x0/0x43() [ 29.603165] Calling initcall 0xffffffff8055b67e: init_timer_sysfs+0x0/0x22() [ 29.617310] Calling initcall 0xffffffff8055b65c: i8259A_init_sysfs+0x0/0x22() [ 29.631632] Calling initcall 0xffffffff8055bb4d: vsyscall_init+0x0/0x9b() [ 29.645166] Calling initcall 0xffffffff8055c093: sbf_init+0x0/0xd7() [ 29.657824] Calling initcall 0xffffffff8055cc54: i8237A_init_sysfs+0x0/0x22() [ 29.672142] Calling initcall 0xffffffff8055d18b: mce_init_device+0x0/0x76() [ 29.686332] Calling initcall 0xffffffff8055cfb1: periodic_mcheck_init+0x0/0x24() [ 29.701075] Calling initcall 0xffffffff8055df35: msr_init+0x0/0xfa() [ 29.713951] Calling initcall 0xffffffff8055e02f: cpuid_init+0x0/0xfa() [ 29.727167] Calling initcall 0xffffffff8055f302: init_lapic_sysfs+0x0/0x33() [ 29.741313] Calling initcall 0xffffffff80560109: ioapic_init_sysfs+0x0/0xb6() [ 29.755635] Calling initcall 0xffffffff80563d56: cache_sysfs_init+0x0/0x5a() [ 29.770281] Calling initcall 0xffffffff805642d2: x8664_sysctl_init+0x0/0x19() [ 29.784514] Calling initcall 0xffffffff80564a8c: ia32_binfmt_init+0x0/0x19() [ 29.798562] Calling initcall 0xffffffff80564aa5: init_syscall32+0x0/0x5a() [ 29.812258] Calling initcall 0xffffffff80564aff: init_aout_binfmt+0x0/0x12() [ 29.826298] Calling initcall 0xffffffff805657b9: create_proc_profile+0x0/0x246() [ 29.841033] Calling initcall 0xffffffff80565a7c: ioresources_init+0x0/0x42() [ 29.855077] Calling initcall 0xffffffff80565bb7: timekeeping_init_device+0x0/0x22() [ 29.870427] Calling initcall 0xffffffff80565cca: uid_cache_init+0x0/0x8c() [ 29.884154] Calling initcall 0xffffffff80565faa: param_sysfs_init+0x0/0x15d() [ 29.903349] Calling initcall 0xffffffff80566107: init_posix_timers+0x0/0x94() [ 29.917604] Calling initcall 0xffffffff805661ca: init_posix_cpu_timers+0x0/0x69() [ 29.932512] Calling initcall 0xffffffff80566273: init_clocksource_sysfs+0x0/0x50() [ 29.947688] Calling initcall 0xffffffff80566358: init_jiffies_clocksource+0x0/0x12() [ 29.963115] Calling initcall 0xffffffff8056636a: init+0x0/0x6c() [ 29.975147] Calling initcall 0xffffffff805663d6: proc_dma_init+0x0/0x25() [ 29.988769] Calling initcall 0xffffffff8014362e: percpu_modinit+0x0/0x73() [ 30.002473] Calling initcall 0xffffffff805663fb: kallsyms_init+0x0/0x28() [ 30.015996] Calling initcall 0xffffffff8056644c: ikconfig_init+0x0/0x3c() [ 30.029523] Calling initcall 0xffffffff805664fa: audit_init+0x0/0xab() [ 30.042524] audit: initializing netlink socket (disabled) [ 30.054554] audit(1149099139.660:1): initialized [ 30.063734] Calling initcall 0xffffffff805665a5: init_kprobes+0x0/0x52() [ 30.077094] Calling initcall 0xffffffff805672ee: init_per_zone_pages_min+0x0/0x41() [ 30.092353] Calling initcall 0xffffffff80567a74: pdflush_init+0x0/0x1a() [ 30.105803] Calling initcall 0xffffffff80567a8e: readahead_init+0x0/0xa6() [ 30.119552] Calling initcall 0xffffffff80567b59: kswapd_init+0x0/0x2b() [ 30.132792] Calling initcall 0xffffffff80567bc8: procswaps_init+0x0/0x25() [ 30.146490] Calling initcall 0xffffffff80567ca7: kprefetchd_init+0x0/0x3d() [ 30.160397] Calling initcall 0xffffffff80567d17: hugetlb_init+0x0/0x63() [ 30.173746] Total HugeTLB memory allocated, 0 [ 30.182405] Calling initcall 0xffffffff80567d7a: init_tmpfs+0x0/0xe1() [ 30.195445] Calling initcall 0xffffffff80567e5b: cpucache_init+0x0/0x37() [ 30.208972] Calling initcall 0xffffffff8056851f: fasync_init+0x0/0x2d() [ 30.222173] Calling initcall 0xffffffff80568b3c: aio_setup+0x0/0x67() [ 30.235121] Calling initcall 0xffffffff80568ba3: inotify_setup+0x0/0x12() [ 30.248646] Calling initcall 0xffffffff80568bb5: inotify_user_setup+0x0/0xbc() [ 30.263092] Calling initcall 0xffffffff80568c71: eventpoll_init+0x0/0xd0() [ 30.276840] Calling initcall 0xffffffff80568d41: init_sys32_ioctl+0x0/0x95() [ 30.290910] Calling initcall 0xffffffff80568e36: dnotify_init+0x0/0x2d() [ 30.304287] Calling initcall 0xffffffff805692d2: configfs_init+0x0/0x98() [ 30.317839] Calling initcall 0xffffffff8056936a: init_devpts_fs+0x0/0x3a() [ 30.331549] Calling initcall 0xffffffff805693a4: init_ext3_fs+0x0/0x5b() [ 30.344917] Calling initcall 0xffffffff8056947d: journal_init+0x0/0xc2() [ 30.358361] Calling initcall 0xffffffff8056953f: init_ext2_fs+0x0/0x5a() [ 30.371732] Calling initcall 0xffffffff80569599: init_cramfs_fs+0x0/0x17() [ 30.385432] Calling initcall 0xffffffff805695b0: init_ramfs_fs+0x0/0x12() [ 30.398956] Calling initcall 0xffffffff805695d4: init_hugetlbfs_fs+0x0/0x7f() [ 30.413201] Calling initcall 0xffffffff8056968b: init_fat_fs+0x0/0x50() [ 30.426425] Calling initcall 0xffffffff805696db: init_msdos_fs+0x0/0x12() [ 30.439948] Calling initcall 0xffffffff805696ed: init_vfat_fs+0x0/0x12() [ 30.453294] Calling initcall 0xffffffff805696ff: init_iso9660_fs+0x0/0x6e() [ 30.467187] Calling initcall 0xffffffff805697d8: init_nls_cp437+0x0/0x12() [ 30.480881] Calling initcall 0xffffffff805697ea: init_nls_cp850+0x0/0x12() [ 30.494572] Calling initcall 0xffffffff805697fc: init_nls_ascii+0x0/0x12() [ 30.508267] Calling initcall 0xffffffff8056980e: init_nls_iso8859_1+0x0/0x12() [ 30.522652] Calling initcall 0xffffffff80569820: init_nls_iso8859_15+0x0/0x12() [ 30.537213] Calling initcall 0xffffffff80569832: init_nls_utf8+0x0/0x25() [ 30.550733] Calling initcall 0xffffffff80569857: init_romfs_fs+0x0/0x5a() [ 30.565557] Calling initcall 0xffffffff805698fa: ipc_init+0x0/0x17() [ 30.578240] Calling initcall 0xffffffff80569adb: init_mqueue_fs+0x0/0xe9() [ 30.591984] Calling initcall 0xffffffff80569d4e: noop_init+0x0/0x12() [ 30.604813] io scheduler noop registered [ 30.612616] Calling initcall 0xffffffff80569d60: as_init+0x0/0x57() [ 30.625118] io scheduler anticipatory registered [ 30.634306] Calling initcall 0xffffffff80569db7: deadline_init+0x0/0x58() [ 30.647855] io scheduler deadline registered [ 30.656349] Calling initcall 0xffffffff80569e0f: cfq_init+0x0/0xcd() [ 30.669074] io scheduler cfq registered (default) [ 30.678444] Calling initcall 0xffffffff802015a8: pci_init+0x0/0x32() [ 30.691114] 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10 [ 30.703578] 0000:00:1d.0: Performing full reset [ 30.712770] 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 30.725234] 0000:00:1d.1: Performing full reset [ 30.734424] 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 30.746887] 0000:00:1d.2: Performing full reset [ 30.756076] 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 [ 30.768541] 0000:00:1d.3: Performing full reset [ 30.777984] Calling initcall 0xffffffff8056a85e: pci_sysfs_init+0x0/0x37() [ 30.791791] Calling initcall 0xffffffff8056a895: pci_proc_init+0x0/0x6f() [ 30.805367] Calling initcall 0xffffffff8056a904: pcie_portdrv_init+0x0/0x2b() [ 30.819758] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 [ 30.834658] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 30.847164] assign_interrupt_mode Found MSI capability [ 30.857475] Allocate Port Service[0000:00:1c.0:pcie00] [ 30.867816] Allocate Port Service[0000:00:1c.0:pcie02] [ 30.878165] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177 [ 30.893064] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 30.905569] assign_interrupt_mode Found MSI capability [ 30.915860] Allocate Port Service[0000:00:1c.2:pcie00] [ 30.926191] Allocate Port Service[0000:00:1c.2:pcie02] [ 30.936534] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 [ 30.951433] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 30.963938] assign_interrupt_mode Found MSI capability [ 30.974228] Allocate Port Service[0000:00:1c.3:pcie00] [ 30.984554] Allocate Port Service[0000:00:1c.3:pcie02] [ 30.994897] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169 [ 31.009804] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 31.022308] assign_interrupt_mode Found MSI capability [ 31.032598] Allocate Port Service[0000:00:1c.4:pcie00] [ 31.042932] Allocate Port Service[0000:00:1c.4:pcie02] [ 31.053272] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 193 [ 31.068174] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 31.080679] assign_interrupt_mode Found MSI capability [ 31.090969] Allocate Port Service[0000:00:1c.5:pcie00] [ 31.101302] Allocate Port Service[0000:00:1c.5:pcie02] [ 31.111650] Calling initcall 0xffffffff8056a92f: pci_hotplug_init+0x0/0x57() [ 31.125702] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.136783] Calling initcall 0xffffffff8056af93: fb_console_init+0x0/0x6a() [ 31.150652] Calling initcall 0xffffffff8056b7c4: vesafb_init+0x0/0x235() [ 31.164237] vesafb: framebuffer at 0x80000000, mapped to 0xffffc20000080000, using 5120k, total 7872k [ 31.182585] vesafb: mode is 1280x1024x16, linelength=2560, pages=2 [ 31.194877] vesafb: scrolling: redraw [ 31.202154] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 31.260457] Console: switching to colour frame buffer device 160x64 [ 31.320013] fb0: VESA VGA frame buffer device [ 31.328916] Calling initcall 0xffffffff8056bbab: vga16fb_init+0x0/0xb1() [ 31.342853] vga16fb: initializing [ 31.349618] vga16fb: mapped to 0xffff8100000a0000 [ 31.359368] fb1: VGA16 VGA frame buffer device [ 31.368445] Calling initcall 0xffffffff8056c82d: acpi_ac_init+0x0/0x60() [ 31.382190] Calling initcall 0xffffffff8056c88d: acpi_battery_init+0x0/0x60() [ 31.396816] Calling initcall 0xffffffff8056c8ed: acpi_button_init+0x0/0x60() [ 31.411273] ACPI: Power Button (FF) [PWRF] [ 31.419655] ACPI: Sleep Button (CM) [SLPB] [ 31.428026] Calling initcall 0xffffffff8056cf2e: acpi_fan_init+0x0/0x60() [ 31.441935] Calling initcall 0xffffffff8056cf8e: acpi_video_init+0x0/0x60() [ 31.456455] Calling initcall 0xffffffff8056cfee: hotkey_init+0x0/0x21d() [ 31.470178] Using specific hotkey driver [ 31.478180] Calling initcall 0xffffffff8056d2e8: irqrouter_init_sysfs+0x0/0x38() [ 31.493427] Calling initcall 0xffffffff8056d492: acpi_processor_init+0x0/0x80() [ 31.509012] ACPI Error (acpi_processor-0474): Getting cpuindex for acpiid 0x3 [20060310] [ 31.525593] ACPI Error (acpi_processor-0474): Getting cpuindex for acpiid 0x4 [20060310] [ 31.542165] Calling initcall 0xffffffff8056d512: acpi_container_init+0x0/0x40() [ 31.561015] Calling initcall 0xffffffff8056d552: acpi_thermal_init+0x0/0x60() [ 31.575651] Calling initcall 0xffffffff8056e02c: rand_initialize+0x0/0x2c() [ 31.589929] Calling initcall 0xffffffff8056e0b9: tty_init+0x0/0x1cd() [ 31.609984] Calling initcall 0xffffffff8056e286: pty_init+0x0/0x43d() [ 31.683014] Calling initcall 0xffffffff8056ec8d: lp_init_module+0x0/0x253() [ 31.697397] lp: driver loaded but no devices found [ 31.707184] Calling initcall 0xffffffff8056eee0: hpet_init+0x0/0x6b() [ 31.720507] Calling initcall 0xffffffff8056ef4b: rtc_generic_init+0x0/0x65() [ 31.734949] Generic RTC Driver v1.07 [ 31.742347] Calling initcall 0xffffffff8056efb0: nvram_init+0x0/0x89() [ 31.755821] Non-volatile memory driver v1.2 [ 31.764359] Calling initcall 0xffffffff8056f039: ppdev_init+0x0/0xcb() [ 31.777826] ppdev: user-space parallel port driver [ 31.787615] Calling initcall 0xffffffff8056f104: watchdog_init+0x0/0xb4() [ 31.801616] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) [ 31.820456] Calling initcall 0xffffffff8056f1b8: agp_init+0x0/0x26() [ 31.833472] Linux agpgart interface v0.101 (c) Dave Jones [ 31.844491] Calling initcall 0xffffffff8056f2e1: drm_core_init+0x0/0x140() [ 31.858588] [drm] Initialized drm 1.0.1 20051102 [ 31.868011] Calling initcall 0xffffffff8056f4d5: hangcheck_init+0x0/0x7e() [ 31.891941] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 31.920508] Hangcheck: Using monotonic_clock(). [ 31.940326] Calling initcall 0xffffffff8056f553: cn_init+0x0/0xc4() [ 31.964092] Calling initcall 0xffffffff8056f617: cn_proc_init+0x0/0x3a() [ 31.988759] Calling initcall 0xffffffff8056fa77: serial8250_init+0x0/0x13a() [ 32.014276] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 32.041916] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.066625] Calling initcall 0xffffffff805700da: parport_default_proc_register+0x0/0x1d() [ 32.095493] Calling initcall 0xffffffff805703ed: parport_pc_init+0x0/0x189() [ 32.122329] parport: PnPBIOS parport detected. [ 32.144066] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 32.246535] lp0: using parport0 (interrupt-driven). [ 32.269604] lp0: console ready [ 32.289304] Calling initcall 0xffffffff8057068b: firmware_class_init+0x0/0x70() [ 32.317882] Calling initcall 0xffffffff805706fb: topology_sysfs_init+0x0/0x4f() [ 32.346576] Calling initcall 0xffffffff805709e0: floppy_init+0x0/0x9cc() [ 32.374245] isa bounce pool size: 16 pages [ 32.396788] Floppy drive(s): fd0 is 1.44M [ 32.439721] FDC 0 is a post-1991 82077 [ 32.462942] Calling initcall 0xffffffff805713ac: rd_init+0x0/0x1c7() [ 32.492645] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize [ 32.522977] Calling initcall 0xffffffff805715cc: loop_init+0x0/0x2c9() [ 32.552729] loop: loaded (max 8 devices) [ 32.576389] Calling initcall 0xffffffff80571895: pkt_init+0x0/0xe8() [ 32.605189] Calling initcall 0xffffffff8057197d: mm_init+0x0/0x1a0() [ 32.633698] v2.3 : Micro Memory(tm) PCI memory board block driver [ 32.661727] MM: desc_per_page = 128 [ 32.684296] Calling initcall 0xffffffff80571b1d: e1000_init_module+0x0/0x45() [ 32.714528] Intel(R) PRO/1000 Network Driver - version 7.0.38-k4 [ 32.742536] Copyright (c) 1999-2006 Intel Corporation. [ 32.768884] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 [ 32.800120] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 32.909145] e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:20:e3:97:02 [ 33.023464] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 33.053958] Calling initcall 0xffffffff80571bf5: net_olddevs_init+0x0/0xb7() [ 33.085102] Calling initcall 0xffffffff80571d81: dummy_init_module+0x0/0xb9() [ 33.116386] Calling initcall 0xffffffff80571e3a: tun_init+0x0/0x64() [ 33.145936] tun: Universal TUN/TAP device driver, 1.6 [ 33.172747] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 33.201906] Calling initcall 0xffffffff802b4568: init_netconsole+0x0/0x5e() [ 33.232729] netconsole: device eth0 not up yet, forcing it [ 36.489028] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [ 36.500245] [<0000000000000000>] stext+0x7feff0e8/0xe8 [ 36.549518] PGD 0 [ 36.570488] Oops: 0010 [1] SMP [ 36.593713] last sysfs file: [ 36.616496] CPU 0 [ 36.637392] Modules linked in: [ 36.660367] Pid: 0, comm: idle Not tainted 2.6.17-rc5-mm1 #1 [ 36.688549] RIP: 0010:[<0000000000000000>] [<0000000000000000>] stext+0x7feff0e8/0xe8 [ 36.704388] RSP: 0000:ffffffff804f4f98 EFLAGS: 00010006 [ 36.749115] RAX: 0000000000001d00 RBX: ffffffff8054fec8 RCX: 0000000000000000 [ 36.780475] RDX: ffffffff8054fec8 RSI: ffffffff80544d00 RDI: 000000000000003a [ 36.811700] RBP: ffffffff804f4fb0 R08: ffffffff8054e000 R09: 000000000000002f [ 36.842745] R10: ffff810003002970 R11: ffffffff80512300 R12: 000000000000003a [ 36.873626] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 36.904373] FS: 0000000000000000(0000) GS:ffffffff80542000(0000) knlGS:0000000000000000 [ 36.937031] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 36.964797] CR2: 0000000000000000 CR3: 0000000000101000 CR4: 00000000000006e0 [ 36.995261] Process idle (pid: 0, threadinfo ffffffff8054e000, task ffffffff80441800) [ 37.027224] Stack: ffffffff8010b711 ffffffff80107d21 0000000000000000 ffffffff8054fef0 [ 37.043298] ffffffff80109708 <EOI> 000020250cff65fa 10250c8b4865c900 1fd8e98148000000 [ 37.076996] 0003582444f70000 00fe6ebf12740000 [ 37.103370] Call Trace: [ 37.140640] <IRQ> [<ffffffff8010b711>] do_IRQ+0x4f/0x5e [ 37.167285] [<ffffffff80107d21>] mwait_idle+0x0/0x53 [ 37.193322] [<ffffffff80109708>] ret_from_intr+0x0/0xa [ 37.219723] <EOI> [ 37.239638] [ 37.239639] Code: Bad RIP value. [ 37.280189] RIP [<0000000000000000>] stext+0x7feff0e8/0xe8 RSP <ffffffff804f4f98> [ 37.310891] CR2: 0000000000000000 [ 37.332934] <0>Kernel panic - not syncing: Aiee, killing interrupt handler! [ 37.362625] BUG: warning at kernel/panic.c:138/panic() [ 37.388627] [ 37.388629] Call Trace: [ 37.426958] <IRQ> [<ffffffff8012a29b>] panic+0x1f9/0x21e [ 37.453041] [<ffffffff801f7dd8>] __up_read+0xaa/0xb2 [ 37.478499] [<ffffffff80137d51>] blocking_notifier_call_chain+0x47/0x51 [ 37.507365] [<ffffffff8012ca06>] do_exit+0x8e/0x8e1 [ 37.532615] [<ffffffff803b03ce>] do_page_fault+0x77a/0x806 [ 37.559092] [<ffffffff801244b4>] move_tasks+0xf1/0x2a8 [ 37.584878] [<ffffffff803ae0a3>] _spin_unlock+0x9/0xb [ 37.610360] [<ffffffff80109edd>] error_exit+0x0/0x84 [ 37.635490] [<ffffffff8010b711>] do_IRQ+0x4f/0x5e [ 37.659887] [<ffffffff80107d21>] mwait_idle+0x0/0x53 [ 37.684661] [<ffffffff80109708>] ret_from_intr+0x0/0xa [ 37.709657] <EOI>
---
~Randy
Quoted 9 lines · On Wed, 31 May 2006 18:25:07 -0700 "Randy.Dunlap" <[email protected]> wrote:
Quoted 2 lines · On Tue, 30 May 2006 02:29:25 -0700 Andrew Morton wrote:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc5/2.6.17-rc5-mm1/
Some odd panic, reproducible. .config attached. Machine is Pentium-D with 2 GB RAM and SATA drives.
There's nothing odd about a panic in that kernel.
Quoted 40 lines
[ 33.232729] netconsole: device eth0 not up yet, forcing it [ 36.489028] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [ 36.500245] [<0000000000000000>] stext+0x7feff0e8/0xe8 [ 36.549518] PGD 0 [ 36.570488] Oops: 0010 [1] SMP [ 36.593713] last sysfs file: [ 36.616496] CPU 0 [ 36.637392] Modules linked in: [ 36.660367] Pid: 0, comm: idle Not tainted 2.6.17-rc5-mm1 #1 [ 36.688549] RIP: 0010:[<0000000000000000>] [<0000000000000000>] stext+0x7feff0e8/0xe8 [ 36.704388] RSP: 0000:ffffffff804f4f98 EFLAGS: 00010006 [ 36.749115] RAX: 0000000000001d00 RBX: ffffffff8054fec8 RCX: 0000000000000000 [ 36.780475] RDX: ffffffff8054fec8 RSI: ffffffff80544d00 RDI: 000000000000003a [ 36.811700] RBP: ffffffff804f4fb0 R08: ffffffff8054e000 R09: 000000000000002f [ 36.842745] R10: ffff810003002970 R11: ffffffff80512300 R12: 000000000000003a [ 36.873626] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 36.904373] FS: 0000000000000000(0000) GS:ffffffff80542000(0000) knlGS:0000000000000000 [ 36.937031] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 36.964797] CR2: 0000000000000000 CR3: 0000000000101000 CR4: 00000000000006e0 [ 36.995261] Process idle (pid: 0, threadinfo ffffffff8054e000, task ffffffff80441800) [ 37.027224] Stack: ffffffff8010b711 ffffffff80107d21 0000000000000000 ffffffff8054fef0 [ 37.043298] ffffffff80109708 <EOI> 000020250cff65fa 10250c8b4865c900 1fd8e98148000000 [ 37.076996] 0003582444f70000 00fe6ebf12740000 [ 37.103370] Call Trace: [ 37.140640] <IRQ> [<ffffffff8010b711>] do_IRQ+0x4f/0x5e [ 37.167285] [<ffffffff80107d21>] mwait_idle+0x0/0x53 [ 37.193322] [<ffffffff80109708>] ret_from_intr+0x0/0xa [ 37.219723] <EOI> [ 37.239638] [ 37.239639] Code: Bad RIP value. [ 37.280189] RIP [<0000000000000000>] stext+0x7feff0e8/0xe8 RSP <ffffffff804f4f98> [ 37.310891] CR2: 0000000000000000 [ 37.332934] <0>Kernel panic - not syncing: Aiee, killing interrupt handler! [ 37.362625] BUG: warning at kernel/panic.c:138/panic() [ 37.388627] [ 37.388629] Call Trace: [ 37.426958] <IRQ> [<ffffffff8012a29b>] panic+0x1f9/0x21e [ 37.453041] [<ffffffff801f7dd8>] __up_read+0xaa/0xb2 [ 37.478499] [<ffffffff80137d51>] blocking_notifier_call_chain+0x47/0x51 [ 37.507365] [<ffffffff8012ca06>] do_exit+0x8e/0x8e1
Quoted 8 lines
[ 37.532615] [<ffffffff803b03ce>] do_page_fault+0x77a/0x806 [ 37.559092] [<ffffffff801244b4>] move_tasks+0xf1/0x2a8 [ 37.584878] [<ffffffff803ae0a3>] _spin_unlock+0x9/0xb [ 37.610360] [<ffffffff80109edd>] error_exit+0x0/0x84 [ 37.635490] [<ffffffff8010b711>] do_IRQ+0x4f/0x5e [ 37.659887] [<ffffffff80107d21>] mwait_idle+0x0/0x53 [ 37.684661] [<ffffffff80109708>] ret_from_intr+0x0/0xa [ 37.709657] <EOI>
OK, I think Martin said something about the machine going down early inside the CPU scheduler.
Are you able to work out what file-n-line move_tasks+0xf1/0x2a8 is at?
gdb vmlinux
(gdb) l *0xffffffff801244b4
Or, if CONFIG_DEBUG_INFO wasn't set:
- Enable CONFIG_DEBUG_INFO
- make vmlinux
- gdb vmlinux
(gdb) p move_tasks
(gdb) l *(0x<address of move_tasks> + 0xf1)
Quoted 8 lines · Andrew Morton
Quoted 8 lines
[ 36.489028] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [ 36.500245] [<0000000000000000>] stext+0x7feff0e8/0xe8[ 37.103370] Call Trace: [ 37.140640] <IRQ> [<ffffffff8010b711>] do_IRQ+0x4f/0x5e [ 37.167285] [<ffffffff80107d21>] mwait_idle+0x0/0x53 [ 37.193322] [<ffffffff80109708>] ret_from_intr+0x0/0xa [ 37.219723] <EOI>
Randy, do you have an MSI-X device perhaps? Could you try the patch below?
Ingo
------------------------------------------------------
Subject: genirq MSI fixes
From: Ingo Molnar <[email protected]>
This is a fixed up and cleaned up replacement for genirq-msi-fixes.patch, which should solve the i386 4KSTACKS problem. I also added Ben's idea of pushing the __do_IRQ() check into generic_handle_irq().
I booted this with MSI enabled, but i only have MSI devices, not MSI-X devices. I'd still expect MSI-X to work now.
irqchip migration helper: call __do_IRQ() if a descriptor is attached to an irqtype-style controller. This also fixes MSI-X IRQ handling on i386 and x86_64.
---
arch/i386/kernel/irq.c | 5 +++++ include/linux/irq.h | 27 ++++++++++++++++----------- 2 files changed, 21 insertions(+), 11 deletions(-)
arch/i386/kernel/irq.c renamed from arch/i386/kernel/irq.c~genirq-msi-fixes-2 +5 -0
@@ -77,6 +77,10 @@ fastcall unsigned int do_IRQ(struct pt_r }#endif +if (!irq_desc[irq].handle_irq) { +__do_IRQ (irq, regs); + goto out_exit; + }#ifdef CONFIG_4KSTACKS curctx = (union irq_ctx *)current_thread_info ();
@@ -109,6 +113,7 @@ fastcall unsigned int do_IRQ(struct pt_r#endif desc->handle_irq (irq, desc, regs); +out_exit:irq_exit ();return 1 ;
include/linux/irq.h renamed from include/linux/irq.h~genirq-msi-fixes-2 +16 -11
@@ -176,17 +176,6 @@ typedef struct irq_desc irq_desc_t;*/ #include <asm/hw_irq.h> -/* -* Architectures call this to let the generic IRQ layer -* handle an interrupt: -*/ -static inline void generic_handle_irq (unsigned int irq,struct pt_regs *regs) -{ -struct irq_desc *desc = irq_desc + irq; - - desc->handle_irq (irq, desc, regs); -} -extern int setup_irq (unsigned int irq,struct irqaction *new);#ifdef CONFIG_GENERIC_HARDIRQS
@@ -324,6 +313,22 @@ handle_irq_name(void fastcall (*handle)(*/ extern fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs); +/* +* Architectures call this to let the generic IRQ layer +* handle an interrupt. If the descriptor is attached to an +* irqchip-style controller then we call the ->handle_irq() handler, +* and it calls __do_IRQ() if it's attached to an irqtype-style controller. +*/ +static inline void generic_handle_irq (unsigned int irq,struct pt_regs *regs) +{ +struct irq_desc *desc = irq_desc + irq; + +if (likely (desc->handle_irq)) + desc->handle_irq (irq, desc, regs); +else +__do_IRQ (irq, regs); +} +/* Handling of unhandled and spurious interrupts: */ extern void note_interrupt (unsigned int irq,struct irq_desc *desc,int action_ret,struct pt_regs *regs);
_
Quoted 6 lines · On Thu, 1 Jun 2006 08:14:40 +0200 Ingo Molnar wrote:
Quoted 2 lines · Andrew Morton
Quoted 2 lines
[ 36.489028] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [ 36.500245] [<0000000000000000>] stext+0x7feff0e8/0xe8
Quoted 8 lines
Quoted 5 lines
Quoted 5 lines
[ 37.103370] Call Trace: [ 37.140640] <IRQ> [<ffffffff8010b711>] do_IRQ+0x4f/0x5e [ 37.167285] [<ffffffff80107d21>] mwait_idle+0x0/0x53 [ 37.193322] [<ffffffff80109708>] ret_from_intr+0x0/0xa [ 37.219723] <EOI>Randy, do you have an MSI-X device perhaps? Could you try the patch below?
Sorry, not that I know of. /proc/interrupts does show this (on 2.6.17-rc5-mm1) (note PCI-MSI-<NULL>):
rddunlap@midway:~> cat /proc/interrupts
CPU0 CPU1
0: 4651467 0 IO-APIC-edge timer 1: 7099 0 IO-APIC-edge i8042 7: 0 0 IO-APIC-edge parport0 9: 0 0 IO-APIC-level acpi 12: 77137 0 IO-APIC-edge i8042 14: 414494 0 IO-APIC-edge ide0 58: 55174 0 PCI-MSI-<NULL> eth0 66: 786408 682074 PCI-MSI-<NULL> libata 74: 0 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb6 82: 31 0 IO-APIC-level ohci_hcd:usb2, ohci_hcd:usb3, ohci_hcd:usb4, ohci_hcd:usb5 90: 242 0 IO-APIC-level HDA Intel 169: 3 0 IO-APIC-level ohci1394 177: 0 0 IO-APIC-level uhci_hcd:usb8 185: 0 0 IO-APIC-level uhci_hcd:usb7 193: 0 0 IO-APIC-level uhci_hcd:usb9 NMI: 1533 1541 LOC: 4651126 4651099 ERR: 1 MIS: 0
Quoted 95 lines
Ingo
------------------------------------------------------
Subject: genirq MSI fixes
From: Ingo Molnar <[email protected]>This is a fixed up and cleaned up replacement for genirq-msi-fixes.patch, which should solve the i386 4KSTACKS problem. I also added Ben's idea of pushing the
__do_IRQ()check intogeneric_handle_irq().I booted this with MSI enabled, but i only have MSI devices, not MSI-X devices. I'd still expect MSI-X to work now.
irqchip migration helper: call
__do_IRQ()if a descriptor is attached to an irqtype-style controller. This also fixes MSI-X IRQ handling on i386 andx86_64.Signed-off-by Ingo Molnar <[email protected]>Cc Thomas Gleixner <[email protected]>Cc Benjamin Herrenschmidt <[email protected]>Cc Roland Dreier <[email protected]>Signed-off-by Andrew Morton <[email protected]>---
arch/i386/kernel/irq.c | 5 +++++ include/linux/irq.h | 27 ++++++++++++++++----------- 2 files changed, 21 insertions(+), 11 deletions(-)diff -puN
arch/i386/kernel/irq.c~genirq-msi-fixes-2arch/i386/kernel/irq.carch/i386/kernel/irq.c renamed from arch/i386/kernel/irq.c~genirq-msi-fixes-2 +5
-0@@ -77,6 +77,10 @@ fastcall unsigned int do_IRQ(struct pt_r }#endif +if (!irq_desc[irq].handle_irq) { +__do_IRQ (irq, regs); + goto out_exit; + }#ifdef CONFIG_4KSTACKS curctx = (union irq_ctx *)current_thread_info ();@@ -109,6 +113,7 @@ fastcall unsigned int do_IRQ(struct pt_r#endif desc->handle_irq (irq, desc, regs); +out_exit:irq_exit ();return 1 ;diff -puN
include/linux/irq.h~genirq-msi-fixes-2include/linux/irq.hinclude/linux/irq.h renamed from include/linux/irq.h~genirq-msi-fixes-2 +16
-11@@ -176,17 +176,6 @@ typedef struct irq_desc irq_desc_t;*/ #include <asm/hw_irq.h> -/* -* Architectures call this to let the generic IRQ layer -* handle an interrupt: -*/ -static inline void generic_handle_irq (unsigned int irq,struct pt_regs *regs) -{ -struct irq_desc *desc = irq_desc + irq; - - desc->handle_irq (irq, desc, regs); -} -extern int setup_irq (unsigned int irq,struct irqaction *new);#ifdef CONFIG_GENERIC_HARDIRQS @@ -324,6 +313,22 @@ handle_irq_name(void fastcall (*handle)(*/ extern fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs); +/* +* Architectures call this to let the generic IRQ layer +* handle an interrupt. If the descriptor is attached to an +* irqchip-style controller then we call the ->handle_irq() handler, +* and it calls __do_IRQ() if it's attached to an irqtype-style controller. +*/ +static inline void generic_handle_irq (unsigned int irq,struct pt_regs *regs) +{ +struct irq_desc *desc = irq_desc + irq; + +if (likely (desc->handle_irq)) + desc->handle_irq (irq, desc, regs); +else +__do_IRQ (irq, regs); +} +/* Handling of unhandled and spurious interrupts: */ extern void note_interrupt (unsigned int irq,struct irq_desc *desc,int action_ret,struct pt_regs *regs);
Quoted 2 lines
_
---
~Randy
Quoted 19 lines · Randy.Dunlap
[ 36.489028] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [ 36.500245] [<0000000000000000>] stext+0x7feff0e8/0xe8 [ 36.549518] PGD 0 [ 36.570488] Oops: 0010 [1] SMP [ 36.593713] last sysfs file: [ 36.616496] CPU 0 [ 36.637392] Modules linked in: [ 36.660367] Pid: 0, comm: idle Not tainted 2.6.17-rc5-mm1 #1 [ 36.688549] RIP: 0010:[<0000000000000000>] [<0000000000000000>] stext+0x7feff0e8/0xe8 [ 36.704388] RSP: 0000:ffffffff804f4f98 EFLAGS: 00010006 [ 36.749115] RAX: 0000000000001d00 RBX: ffffffff8054fec8 RCX: 0000000000000000 [ 36.780475] RDX: ffffffff8054fec8 RSI: ffffffff80544d00 RDI: 000000000000003a [ 36.811700] RBP: ffffffff804f4fb0 R08: ffffffff8054e000 R09: 000000000000002f [ 36.842745] R10: ffff810003002970 R11: ffffffff80512300 R12: 000000000000003a [ 36.873626] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 36.904373] FS: 0000000000000000(0000) GS:ffffffff80542000(0000) knlGS:0000000000000000 [ 36.937031] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 36.964797] CR2: 0000000000000000 CR3: 0000000000101000 CR4: 00000000000006e0 [ 36.995261] Process idle (pid: 0, threadinfo ffffffff8054e000, task ffffffff80441800)
Quoted 8 lines
[ 37.027224] Stack: ffffffff8010b711 ffffffff80107d21 0000000000000000 ffffffff8054fef0 [ 37.043298] ffffffff80109708 <EOI> 000020250cff65fa 10250c8b4865c900 1fd8e98148000000 [ 37.076996] 0003582444f70000 00fe6ebf12740000 [ 37.103370] Call Trace: [ 37.140640] <IRQ> [<ffffffff8010b711>] do_IRQ+0x4f/0x5e [ 37.167285] [<ffffffff80107d21>] mwait_idle+0x0/0x53 [ 37.193322] [<ffffffff80109708>] ret_from_intr+0x0/0xa [ 37.219723] <EOI>
changes mentioned in this thread should help..
http://www.ussg.iu.edu/hypermail/linux/kernel/0605.3/1991.html
Quoted 29 lines · Suresh B
Quoted 19 lines · Randy.Dunlap
[ 36.489028] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [ 36.500245] [<0000000000000000>] stext+0x7feff0e8/0xe8 [ 36.549518] PGD 0 [ 36.570488] Oops: 0010 [1] SMP [ 36.593713] last sysfs file: [ 36.616496] CPU 0 [ 36.637392] Modules linked in: [ 36.660367] Pid: 0, comm: idle Not tainted 2.6.17-rc5-mm1 #1 [ 36.688549] RIP: 0010:[<0000000000000000>] [<0000000000000000>] stext+0x7feff0e8/0xe8 [ 36.704388] RSP: 0000:ffffffff804f4f98 EFLAGS: 00010006 [ 36.749115] RAX: 0000000000001d00 RBX: ffffffff8054fec8 RCX: 0000000000000000 [ 36.780475] RDX: ffffffff8054fec8 RSI: ffffffff80544d00 RDI: 000000000000003a [ 36.811700] RBP: ffffffff804f4fb0 R08: ffffffff8054e000 R09: 000000000000002f [ 36.842745] R10: ffff810003002970 R11: ffffffff80512300 R12: 000000000000003a [ 36.873626] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 36.904373] FS: 0000000000000000(0000) GS:ffffffff80542000(0000) knlGS:0000000000000000 [ 36.937031] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 36.964797] CR2: 0000000000000000 CR3: 0000000000101000 CR4: 00000000000006e0 [ 36.995261] Process idle (pid: 0, threadinfo ffffffff8054e000, task ffffffff80441800)Quoted 8 lines
[ 37.027224] Stack: ffffffff8010b711 ffffffff80107d21 0000000000000000 ffffffff8054fef0 [ 37.043298] ffffffff80109708 <EOI> 000020250cff65fa 10250c8b4865c900 1fd8e98148000000 [ 37.076996] 0003582444f70000 00fe6ebf12740000 [ 37.103370] Call Trace: [ 37.140640] <IRQ> [<ffffffff8010b711>] do_IRQ+0x4f/0x5e [ 37.167285] [<ffffffff80107d21>] mwait_idle+0x0/0x53 [ 37.193322] [<ffffffff80109708>] ret_from_intr+0x0/0xa [ 37.219723] <EOI>
Quoted 3 lines
changes mentioned in this thread should help..
http://www.ussg.iu.edu/hypermail/linux/kernel/0605.3/1991.html
Ack, thanks, fixed.
---
~Randy