Skip to contentSkip to conversation

hardware limits

DISCUSSION Niels Borne 2 participants 4 messages May 28, 2006 – Jun 4, 2006

lore
Share & tools
lore
#0 lore raw

Hi there,

I am working on a vaio laptop pcg-fr415b, using fc5 (see result of cat /proc/cpuinfo above). Since it is quite noisy I allowed cpuspeed at startup and this improved the situation a little bit. Still cpufreq-info (see details above -in french, but you can guess) gives
hardware limits : 2.10 GHz - 2.80 GHz
Is there any hope to go below 2.10 GHz and if yes, how ?

Thanks,

Niels

cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Celeron(R) CPU 2.80GHz
stepping : 9
cpu MHz : 2100.000
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 5589.50

cpufreq-info
cpufrequtils 0.4: cpufreq-info (C) Dominik Brodowski 2004
Veuillez rapportez les erreurs et les bogues à [email protected], s'il vous plait. analyse du CPU 0 :
pilote : p4-clockmod
CPUs qui doivent changer de fréquences en même temps : 0 limitation matérielle : 2.10 GHz - 2.80 GHz
plage de fréquence : 2.10 GHz, 2.45 GHz, 2.80 GHz
régulateurs disponibles : userspace, performance
tactique actuelle : la fréquence doit être comprise entre 2.10 GHz et
2.80 GHz.
Le régulateur "userspace" est libre de choisir la vitesse dans cette plage de fréquences.
la fréquence actuelle de ce CPU est 2.10 GHz.

#1 lore raw

Hi,

Quoted 7 lines · Niels Borne

I am working on a vaio laptop pcg-fr415b, using fc5 (see result of cat /proc/cpuinfo above).
Since it is quite noisy I allowed cpuspeed at startup and this improved the situation a little bit.
Still cpufreq-info (see details above -in french, but you can guess) gives hardware limits : 2.10 GHz - 2.80 GHz
Is there any hope to go below 2.10 GHz and if yes, how ?

Unfortunately no -- there's a bug in the hardware which causes problems if the frequency is lower than 2 GHz. Also, p4-clockmod doesn't save you all that much (if at all) as it doesn't do CPU frequency and voltage scaling, so you shouldn't worry too much about this...

Dominik

#2 lore raw

Hi,

Thanks for your answer. More questions below :

Quoted 11 lines · Dominik Brodowski

Hi,

Quoted 5 lines · Niels Borne

I am working on a vaio laptop pcg-fr415b, using fc5 (see result of cat /proc/cpuinfo above). Since it is quite noisy I allowed cpuspeed at startup and this improved the situation a little bit. Still cpufreq-info (see details above -in french, but you can guess) gives
hardware limits : 2.10 GHz - 2.80 GHz
Is there any hope to go below 2.10 GHz and if yes, how ?

Unfortunately no -- there's a bug in the hardware which causes problems if the frequency is lower than 2 GHz.

Which hardware exactly ? It this related to the N60 errata ?

Also, p4-clockmod doesn't save you all

Quoted 1 line

that much (if at all)

well it seems to improve somewhat

as it doesn't do CPU frequency and voltage scaling,

what do you mean ? my frequency is now most often 2.10 GHz, and was 2.80 GHz, so it does CPU frequency, doesn't it ?

so you shouldn't worry too much about this...

Quoted 2 lines

Dominik

Niels

#3 lore raw

Hi,

Quoted 9 lines · Niels Borne
Quoted 9 lines · Niels Borne
Quoted 7 lines

I am working on a vaio laptop pcg-fr415b, using fc5 (see result of cat /proc/cpuinfo above).
Since it is quite noisy I allowed cpuspeed at startup and this improved the situation a little bit.
Still cpufreq-info (see details above -in french, but you can guess) gives hardware limits : 2.10 GHz - 2.80 GHz
Is there any hope to go below 2.10 GHz and if yes, how ?

Quoted 4 lines
Quoted 2 lines

Unfortunately no -- there's a bug in the hardware which causes problems if the frequency is lower than 2 GHz.

Which hardware exactly ? It this related to the N60 errata ?

Yes, that's the N60 errata.

Quoted 9 lines

Also, p4-clockmod doesn't save you all

Quoted 1 line

that much (if at all)

well it seems to improve somewhat

as it doesn't do CPU frequency and voltage scaling,

what do you mean ? my frequency is now most often 2.10 GHz, and was 2.80 GHz, so it does CPU frequency, doesn't it ?

It doesn't scale the frequency, it throttles it -- and that means that the voltage cannot be dropped:

"In contrast to CPU frequency scaling, where the operating frequency is constantly modulated, throttling means the CPU is forced to a halt for short periods of time. If throttled, the CPU [enters] into a physical and electrical state comparable to the idling states mentioned above, so it can be described as an enforced idling of the CPU.

As certain CPU power state typically utilize similar hardware implementations, and as throttling does not have a positive effect on the energy consumption during CPU power states, throttling the CPU by a given rate is only useful if the CPU is less idle than the throttling rate."

Dominik