Skip to contentSkip to conversation

MSI-K8T-Neo2-Fir run only where needed

RFC PATCH New Chris Wedgwood 1 participant 1 message Jun 5, 2006 1 message not in the archive PCI

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

RFC PATCH 1/1 MSI-K8T-Neo2-Fir run only where needed

On Thu, Apr 20, 2006 at 04:00:58PM +0000, the git-commits list sent me:

Quoted 8 lines

Subject: Re: [PATCH] MSI-K8T-Neo2-Fir OnboardSound and additional Soundcard

commit 7daa0c4f51897d5d956a62a2bac438e3b58d85dc [PATCH] MSI-K8T-Neo2-Fir OnboardSound and additional Soundcard

On the MSI-K8T-NEO2 FIR ( Athlon-64, Socket 939 with VIA-K8T800- Chipset and onboard Sound,... ) the BIOS lets you choose "DISABLED" or "AUTO" for the On-Board Sound Device.

[...]

Quoted 2 lines

But how to ensure that the code is executed ONLY on excactly this kind of boards (not any other with similar Chipset)?

The patch doesn't as-is, which means it runs on a lot of hardware where it shoudln't.

I'm a confused lost as to why this was acked/merged when:

Quoted 1 line

+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);

clearly it will run for a wide-variety of hardware. I think the quirk should probably also check DMI tables or similar to detect the board/BIOS version that it's intended for. Certainly that would make this safer.

I don't have access to this hardware so how about something like this for now?

---

Be more selective when running the MSI-K8T-Neo2Fir soundcard PCI quirk so as not to run this on hardware where it's probably not needed.

drivers/pci/quirks.c +10 -7
index d378478..daa17fa 100644
@@ -878,27 +878,30 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
  * when a PCI-Soundcard is added. The BIOS only gives Options
  * "Disabled" and "AUTO". This Quirk Sets the corresponding
  * Register-Value to enable the Soundcard.
+ *
+ * FIXME: Presently this quirk will run on anything that has an 8237
+ * which isn't correct, we need to check DMI tables or something in
+ * order to make sure it only runs on the MSI-K8T-Neo2Fir.  Because it
+ * runs everywhere at present we suppress the printk output in most
+ * irrelevant cases.
  */
 static void __init k8t_sound_hostbridge(struct pci_dev *dev)
 {
 	unsigned char val;
 
-	printk(KERN_INFO "PCI: Quirk-MSI-K8T Soundcard On\n");
 	pci_read_config_byte(dev, 0x50, &val);
 	if (val == 0x88 || val == 0xc8) {
+		/* Assume it's probably a MSI-K8T-Neo2Fir */
+		printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON\n");
 		pci_write_config_byte(dev, 0x50, val & (~0x40));
 
 		/* Verify the Change for Status output */
 		pci_read_config_byte(dev, 0x50, &val);
 		if (val & 0x40)
-			printk(KERN_INFO "PCI: MSI-K8T soundcard still off\n");
+			printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, soundcard still off\n");
 		else
-			printk(KERN_INFO "PCI: MSI-K8T soundcard on\n");
-	} else {
-		printk(KERN_INFO "PCI: Unexpected Value in PCI-Register: "
-					"no Change!\n");
+			printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, soundcard on\n");
 	}
-
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);