Skip to contentSkip to conversation

Need pci=conf1 to have my PCI slots working

DISCUSSION Marcelo Feitoza Parisi 2 participants 2 messages Jun 7, 2006

lore
Share & tools
lore
#0 lore raw

Motherboard: Asus P5VDC-MX
Northbridge: VIA P4M800 PRO
Southbridge: VIA VT8251
Kernel Version: 2.6.15-23-386 (Ubuntu Dapper Drake original kernel)

My PCI cards where not being showed on lspci and lshw. Tried to change cards, change slots, nothing worked. So someone told me to try pci=conf1 in my boot, and it worked.He then told me that you people might be interested in hearing that was necessary and then cowardly ran off.

Best regards

Signature · 6 lines
Marcelo Feitoza Parisi
[email protected]
http://marcelo.feitoza.com.br/
Key ID: 0x42A42C9A
Key fingerprint: ADDE EEE7 57D9 FB45 2605 5A03 54DA 3079 42A4 2C9A
Key: http://marcelo.feitoza.com.br/GnuPG/chave_publica.asc
#1 lore raw
Quoted 9 lines · Marcelo Feitoza Parisi

Motherboard: Asus P5VDC-MX
Northbridge: VIA P4M800 PRO
Southbridge: VIA VT8251
Kernel Version: 2.6.15-23-386 (Ubuntu Dapper Drake original kernel)

My PCI cards where not being showed on lspci and lshw. Tried to change cards, change slots, nothing worked. So someone told me to try pci=conf1 in my boot, and it worked.He then told me that you people might be interested in hearing that was necessary and then cowardly ran off.

Can you try the latest 2.6.17-rc6 kernel? This should hopefully "just work" there.

thanks,

greg k-h