usb: new driver for Cypress CY7C63xxx mirco controllers
PATCH 1/1 usb: new driver for Cypress CY7C63xxx mirco controllers
From: Oliver Bock <[email protected]>
This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information.
---
Please CC me as I'm not yet subscribed to LKML. Any comments are welcome. Special thanks to Greg K-H for his helpful support!
diff against 2.6.16.19
drivers/usb/Makefile 2006-06-04 21:03:24.000000000 +0200 renamed from drivers/usb/Makefile.orig 2006-05-31 02:31:44.000000000 +0200 +0 -0
@@ -62,6 +62,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB_AUERSWALD) += misc/
+obj-$(CONFIG_USB_CY7C63) += misc/
obj-$(CONFIG_USB_CYTHERM) += misc/
obj-$(CONFIG_USB_EMI26) += misc/
obj-$(CONFIG_USB_EMI62) += misc/
drivers/usb/misc/Kconfig 2006-06-04 21:02:21.000000000 +0200 renamed from drivers/usb/misc/Kconfig.orig 2006-05-31 02:31:44.000000000 +0200 +0 -0
@@ -88,6 +88,20 @@ config USB_LED
To compile this driver as a module, choose M here: the module will be called usbled.
+config USB_CY7C63
+ tristate "Cypress CY7C63xxx USB driver support"
+ depends on USB
+ help
+ Say Y here if you want to connect a Cypress CY7C63xxx + micro controller to your computer's USB port. This driver + supports the pre-programmed devices (incl. firmware) by + AK Modul-Bus Computer GmbH.
+
+ Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html
+
+ To compile this driver as a module, choose M here: the + module will be called cy7c63.
+
config USB_CYTHERM
tristate "Cypress USB thermometer driver support" depends on USB
drivers/usb/misc/Makefile 2006-06-04 21:02:52.000000000 +0200 renamed from drivers/usb/misc/Makefile.orig 2006-05-31 02:31:44.000000000 +0200 +0 -0
@@ -4,6 +4,7 @@
#
obj-$(CONFIG_USB_AUERSWALD) += auerswald.o +obj-$(CONFIG_USB_CY7C63) += cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o obj-$(CONFIG_USB_EMI26) += emi26.o obj-$(CONFIG_USB_EMI62) += emi62.o
drivers/usb/misc/cy7c63.c 2006-06-04 23:45:54.000000000 +0200 renamed from drivers/usb/misc/cy7c63.c.orig 1970-01-01 01:00:00.000000000 +0100 +244 -0
244 lines not on this page · raw message
Quoted 8 lines · Oliver Bock
From: Oliver Bock <[email protected]>
This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information.
I see "a" letters here tabs should have been. You probably need to resend...
Quoted 4 lines
Please CC me as I'm not yet subscribed to LKML. Any comments are welcome. Special thanks to Greg K-H for his helpful support!
diff against 2.6.16.19
Ugh, and new drivers should really go against 2.6.17-rcX.
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 10 lines · Pavel Machek
Quoted 8 lines · Oliver Bock
From: Oliver Bock <[email protected]>
This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information.
Quoted 2 lines
I see "a" letters here tabs should have been. You probably need to resend...
It's just mime, my tools can handle it, I hope...
Quoted 6 lines
Quoted 4 lines
Please CC me as I'm not yet subscribed to LKML. Any comments are welcome. Special thanks to Greg K-H for his helpful support!
diff against 2.6.16.19
Ugh, and new drivers should really go against 2.6.17-rcX.
Stand-alone drivers should work ok, I'll test this one and see...
thanks,
greg k-h
Hi Greg,
I submitted the patch again a few hours ago. Now the tabs are still there where they belong and it's a diff against 2.6.17-rc6.
Have a look at: http://lkml.org/lkml/2006/6/9/398
Thanks, Oliver
Quoted 29 lines · Greg KH
Quoted 11 lines · Pavel Machek
Quoted 9 lines · Oliver Bock
From: Oliver Bock <[email protected]>
This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information.
Quoted 2 lines
I see "a" letters here tabs should have been. You probably need to resend...
It's just mime, my tools can handle it, I hope...
Quoted 6 lines
Quoted 4 lines
Please CC me as I'm not yet subscribed to LKML. Any comments are welcome. Special thanks to Greg K-H for his helpful support!
diff against 2.6.16.19
Ugh, and new drivers should really go against 2.6.17-rcX.
Stand-alone drivers should work ok, I'll test this one and see...
thanks,
greg k-h