Skip to contentSkip to conversation

cpqarray: Cleanups about ida_proc_get_info

PATCH New Laura Garcia 1 participant 1 message Jun 12, 2006 Block layer

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 cpqarray: Cleanups about ida_proc_get_info

Hi, this patch do some fixes about ida_proc_get_info().

- Removes unused local variables
- Eliminates possible null pointers
- Rewrite spin locks order
- Define unused CPQ_PROC_PRINT_QUEUES

drivers/block/cpqarray.c 2006-06-13 01:01:29.000000000 +0200 renamed from drivers/block/cpqarray.c 2006-06-13 01:03:02.000000000 +0200 +0 -1
diff -Nru a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
@@ -227,11 +227,11 @@
 /*
  * Report information about this controller.
  */
-static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *e

of, void *data)
+static int ida_proc_get_info(char *buffer, char **start, off_t offset,
+ int length, int *eof, void *data)
{

-       off_t pos = 0;
        off_t len = 0;
-       int size, i, ctlr;
+       int i, ctlr;
        ctlr_info_t *h = (ctlr_info_t*)data;
        drv_info_t *drv;

#ifdef CPQ_PROC_PRINT_QUEUES
@@ -240,7 +240,7 @@
#endif

        ctlr = h->ctlr;
-       size = sprintf(buffer, "%s:  Compaq %s Controller\n"
+       len += sprintf(buffer, "%s:  Compaq %s Controller\n"
                "       Board ID: 0x%08lx\n"
                "       Firmware Revision: %c%c%c%c\n"
                "       Controller Sig: 0x%08lx\n"
@@ -260,47 +260,43 @@
                h->log_drives, h->phys_drives,
                h->Qdepth, h->maxQsinceinit);

- pos += size; len += size;
-

-       size = sprintf(buffer+len, "Logical Drive Info:\n");
-       pos += size; len += size;
+       len += sprintf(buffer+len, "Logical Drive Info:\n");
        for(i=0; i<h->log_drives; i++) {
                drv = &h->drv[i];
-               size = sprintf(buffer+len, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
+               len += sprintf(buffer+len, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
                                ctlr, i, drv->blk_size, drv->nr_blks);
-               pos += size; len += size;
        }

#ifdef CPQ_PROC_PRINT_QUEUES

-       spin_lock_irqsave(IDA_LOCK(h->ctlr), flags); 
-       size = sprintf(buffer+len, "\nCurrent Queues:\n");
-       pos += size; len += size;
+       len += sprintf(buffer+len, "\nCurrent Queues:\n");
+       spin_lock_irqsave(IDA_LOCK(ctlr), flags); 
        c = h->reqQ;
-       size = sprintf(buffer+len, "reqQ = %p", c); pos += size; len += size;
-       if (c) c=c->next;
-       while(c && c != h->reqQ) {
-               size = sprintf(buffer+len, "->%p", c);
-               pos += size; len += size;
+       if (c) {
+               len += sprintf(buffer+len, "reqQ = %p", c);
                c=c->next;

+ while(c && c != h->reqQ) {
+ len += sprintf(buffer+len, "->%p", c);
+ c=c->next;
+ }

        }
 
        c = h->cmpQ;
-       size = sprintf(buffer+len, "\ncmpQ = %p", c); pos += size; len += size;
-       if (c) c=c->next;
-       while(c && c != h->cmpQ) {
-               size = sprintf(buffer+len, "->%p", c);
-               pos += size; len += size;
+       if (c) {
+               len += sprintf(buffer+len, "\ncmpQ = %p", c);
                c=c->next;

+ while(c && c != h->cmpQ) {
+ len += sprintf(buffer+len, "->%p", c);
+ c=c->next;
+ }

        }
-       size = sprintf(buffer+len, "\n"); pos += size; len += size;
-       spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags); 
+       spin_unlock_irqrestore(IDA_LOCK(ctlr), flags); 
+       len += sprintf(buffer+len, "\n");
 #endif
-       size = sprintf(buffer+len, "nr_allocs = %d\nnr_frees = %d\n",
+       len += sprintf(buffer+len, "nr_allocs = %d\nnr_frees = %d\n",
                        h->nr_allocs, h->nr_frees);

- pos += size; len += size;

        *eof = 1;
        *start = buffer+offset;
drivers/block/Kconfig 2006-06-13 01:01:29.000000000 +0200 renamed from drivers/block/Kconfig 2006-06-13 01:04:44.000000000 +0200 +7 -0
diff -Nru a/drivers/block/Kconfig b/drivers/block/Kconfig
@@ -154,6 +154,13 @@
          supported by this driver, and for further information on the use of
          this driver.
 
+config CPQ_PROC_PRINT_QUEUES
+       bool "Print Smart Array Queues information"
+       depends on BLK_CPQ_DA
+       help
+         This option prints some extra information about Smart Array Queues
+         under proc filesystem.
+
 config BLK_CPQ_CISS_DA
        tristate "Compaq Smart Array 5xxx support"
        depends on PCI
drivers/block/cpqarray.c +23 -27

88 lines not on this page · raw message

drivers/block/Kconfig +7 -0
diff -Nru a/drivers/block/Kconfig b/drivers/block/Kconfig
@@ -154,6 +154,13 @@
 	  supported by this driver, and for further information on the use of
 	  this driver.
 
+config CPQ_PROC_PRINT_QUEUES
+	bool "Print Smart Array Queues information"
+	depends on BLK_CPQ_DA
+	help
+	  This option prints some extra information about Smart Array Queues
+	  under proc filesystem.
+
 config BLK_CPQ_CISS_DA
 	tristate "Compaq Smart Array 5xxx support"
 	depends on PCI