Skip to contentSkip to conversation

bcm43xx in 2.6.17-rc6

DISCUSSION Andreas Rittershofer 2 participants 4 messages Jun 12, 2006 – Jun 15, 2006

lore
Share & tools
lore
#0 lore raw

lspci says:

00:0c.0 Network controller: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02)

So the bcm43xx-support with kernel 2.6.17-rc6 should work, but it does only partially - WPA is not running; wpa_supplicant says:

ioctl[SIOCSIWENCODEEXT]: Invalid argument
Driver did not support SIOCSIWENCODEEXT
WPA: Failed to set PTK to the driver.
State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: GROUP_HANDSHAKE -> DISCONNECTED wpa_driver_wext_deauthenticate
ioctl[SIOCSIWMLME]: Operation not supported
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0 wpa_driver_wext_set_wpa wpa_driver_wext_set_drop_unencrypted wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing

What is wrong here?

mfg ar

Signature · 2 lines
E-Learning in der Schule:
http://www.dbg-metzingen.de/Menschen/Lehrer/Q-T/Rittershofer/E-Learning/
#1 lore raw
Quoted 2 lines · Andreas Rittershofer

00:0c.0 Network controller: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02)

bcm43xx is hardly tested on B-only hardware.
Does it work without encryption?

Signature · 1 line
Greetings Michael.
#2 lore raw

Am Montag, den 12.06.2006, 18:49 +0200 schrieb Michael Buesch:

Quoted 7 lines · Andreas Rittershofer
Quoted 2 lines

00:0c.0 Network controller: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02)

bcm43xx is hardly tested on B-only hardware.
Does it work without encryption?

I don't know since I cannot deactivate encryption on my AP - I must use encryption.

I just tested the following Card-Bus-Card:
02:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)

It's also a broadcom-chip in another version, but the driver also says:
ioctl[SIOCSIWENCODEEXT]: Invalid argument
Driver did not support SIOCSIWENCODEEXT
WPA: Failed to set PTK to the driver.

The driver really seems to have a problem: wpa_supplicant wants to do something and the driver does not understands it.

mfg ar

Signature · 2 lines
E-Learning in der Schule:
http://www.dbg-metzingen.de/Menschen/Lehrer/Q-T/Rittershofer/E-Learning/
#3 lore raw
Quoted 11 lines · Andreas Rittershofer

Am Montag, den 12.06.2006, 18:49 +0200 schrieb Michael Buesch:

Quoted 7 lines · Andreas Rittershofer
Quoted 2 lines

00:0c.0 Network controller: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02)

bcm43xx is hardly tested on B-only hardware.
Does it work without encryption?

I don't know since I cannot deactivate encryption on my AP - I must use encryption.

Why can't you deactivate it for the sake of testing?

Quoted 14 lines

I just tested the following Card-Bus-Card:
02:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)

It's also a broadcom-chip in another version, but the driver also says:
ioctl[SIOCSIWENCODEEXT]: Invalid argument
Driver did not support SIOCSIWENCODEEXT
WPA: Failed to set PTK to the driver.

The driver really seems to have a problem: wpa_supplicant wants to do something and the driver does not understands it.

mfg ar

Signature · 1 line
Greetings Michael.