Skip to contentSkip to conversation

Microsoft Wireless 6000 Mouse/Keyboard

DISCUSSION Florin Iucha 2 participants 4 messages Jun 19, 2006 – Jun 20, 2006

lore
Share & tools
lore
#0 lore raw

Is the Microsoft Wireless Desktop 6000 supported under Linux? I am plugging the dongle into the motherboard port and under Linux 2.6.17 I cannot see it, but get the following error messages in the log:

[  149.386325] usb 2-7: new low speed USB device using ohci_hcd and address 6
[  149.469949] usb 2-7: device descriptor read/64, error -110
[  149.600844] usb 2-7: device descriptor read/64, error -110
[  149.728097] usb 2-7: new low speed USB device using ohci_hcd and address 7
[  149.811719] usb 2-7: device descriptor read/64, error -110
[  149.942610] usb 2-7: device descriptor read/64, error -110
[  150.069866] usb 2-7: new low speed USB device using ohci_hcd and address 8
[  150.258930] usb 2-7: device not accepting address 8, error -110
[  150.338920] usb 2-7: new low speed USB device using ohci_hcd and address 9
[  150.527982] usb 2-7: device not accepting address 9, error -110
[  275.993109] usb 2-8: new low speed USB device using ohci_hcd and address 10
[  276.076735] usb 2-8: device descriptor read/64, error -110
[  276.207624] usb 2-8: device descriptor read/64, error -110
[  276.334880] usb 2-8: new low speed USB device using ohci_hcd and address 11
[  276.418503] usb 2-8: device descriptor read/64, error -110
[  276.549394] usb 2-8: device descriptor read/64, error -110
[  276.676650] usb 2-8: new low speed USB device using ohci_hcd and address 12
[  276.862082] usb 2-8: device not accepting address 12, error -110
[  276.942069] usb 2-8: new low speed USB device using ohci_hcd and address 13
[  277.127496] usb 2-8: device not accepting address 13, error -110
[  373.348645] usb 2-7: new low speed USB device using ohci_hcd and address 14
[  373.534074] usb 2-7: device not accepting address 14, error -110
[  373.614062] usb 2-7: new low speed USB device using ohci_hcd and address 15
[  373.799490] usb 2-7: device not accepting address 15, error -110
[  373.879484] usb 2-7: new low speed USB device using ohci_hcd and address 16
[  373.961286] usb 2-7: device descriptor read/64, error -110
[  374.090359] usb 2-7: device descriptor read/64, error -110
[  374.217615] usb 2-7: new low speed USB device using ohci_hcd and address 17
[  374.299421] usb 2-7: device descriptor read/64, error -110
[  374.428495] usb 2-7: device descriptor read/64, error -110

This is on a Asus A8N-SLI motheboard using Nforce4 chipset. I have plugged it into a Laptop using the Intel BX chipset, but I wasn't getting even these errors. Nothing at all.

The OS is debian testing/unstable . Is there anything I can do to help debug this problem?

Thank you,
florin

Signature · 2 lines
If we wish to count lines of code, we should not regard them as lines
produced but as lines spent.                       -- Edsger Dijkstra
#1 lore raw
Quoted 5 lines

Is the Microsoft Wireless Desktop 6000 supported under Linux? I am plugging the dongle into the motherboard port and under Linux 2.6.17 I cannot see it, but get the following error messages in the log:

Batteries going to be empty? (Though in that case I've seen different things like "noisy keyboard".)

Quoted 1 line
[  276.076735] usb 2-8: device descriptor read/64, error -110

Jan Engelhardt

#2 lore raw
Quoted 7 lines · Jan Engelhardt
Quoted 5 lines

Is the Microsoft Wireless Desktop 6000 supported under Linux? I am plugging the dongle into the motherboard port and under Linux 2.6.17 I cannot see it, but get the following error messages in the log:

Batteries going to be empty? (Though in that case I've seen different things like "noisy keyboard".)

Nope, I checked them in a small flashlight. From the look of it, it seems like the wireless dongle is not talking with the OS or hardware.

florin

Signature · 2 lines
If we wish to count lines of code, we should not regard them as lines
produced but as lines spent.                       -- Edsger Dijkstra
#3 lore raw
In reply to Florin Iucha
Quoted 6 lines · Florin

Is the Microsoft Wireless Desktop 6000 supported under Linux? I am plugging the dongle into the motherboard port and under Linux 2.6.17 I cannot see it, but get the following error messages in the log:

[  149.386325] usb 2-7: new low speed USB device using ohci_hcd and address 6
[  149.469949] usb 2-7: device descriptor read/64, error -110

Just for the record: that particular unit was broken, it would not be recognized even by Windows. I have exchanged it and the replacement works fine on both my Linux-running computers. Plug-and-play!

Thank you,
florin

Signature · 2 lines
If we wish to count lines of code, we should not regard them as lines
produced but as lines spent.                       -- Edsger Dijkstra