S3C2410: cleanup compile
Subsystems (3)
PATCH 1/1 S3C2410: cleanup compile
Remove two unused variables and update the comments for the new NAND command code entries
Signed-off-by Ben Dooks <[email protected]>
drivers/mtd/nand/s3c2410.c +3 -8
@@ -268,20 +268,16 @@ static void s3c2410_nand_select_chip(strclk_disable (info->clk); } -/* command and control functions -* -* Note, these all use tglx's method of changing the IO_ADDR_W field -* to make the code simpler, and use the nand layer's code to issue the -* command and address sequences via the proper IO ports. +/* s3c2410_nand_hwcontrol * +* Issue command and address cycles to the chip */ static void s3c2410_nand_hwcontrol (struct mtd_info *mtd,int cmd,unsigned int ctrl) {struct s3c2410_nand_info *info =s3c2410_nand_mtd_toinfo (mtd); -struct nand_chip *chip = mtd->priv; - +if (cmd ==NAND_CMD_NONE )return ;
@@ -297,7 +293,6 @@ static void s3c2440_nand_hwcontrol(struc unsigned int ctrl) {struct s3c2410_nand_info *info =s3c2410_nand_mtd_toinfo (mtd); -struct nand_chip *chip = mtd->priv;if (cmd ==NAND_CMD_NONE )return ;